Business inkjet 2800 put in new printheads and still says replace cyan, magenta and yellow printhead

Business inkjet 2800 replaced cyan, magenta and yellow printheads prints a good alignment but at end says replace printheads

To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital-Imaging/ct-p/bsc-412
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

  • HP Business Inkjet 2800 Printing Magenta Instead of Red

    Hi,
    We've got an HP Business Inkjet 2800 in the office that is printing magenta instead of red. I'm printing from Windows XP. I've aligned the cartridges and cleaned the cartridges, and still haven't been able to solve the problem. Any suggestions?
    Thanks,
    Cory

    Hello mikesorr,
    On the bottom of the ink cartridge is a small chip that the printer reads to help determine information about the ink. You may want to inspect that area to ensure it is clean and inspect inside the printer where the chip makes contact with the printer contacts to ensure there are no spillage or other debris which may cause the chip to not be read properly.
    Also it may help to also post your question on the HP Enterpise Business Community since the product is a business model, the community there may have additional troubleshooting steps or other information that may assist you.
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • HP business inkjet 2800 Print black only option not showing in Windows 7 64 bit operating system

    HP business inkjet 2800 Print black only option not showing in Windows 7 64 bit operating system
    Please help, if any one knows any solution.

    Hi @Firoskhan,
    Welcome to the HP Forums!
    I am sorry, but to get your issue more exposure I would suggest posting it, in the commercial forums since this is a commercial product. You can do this at HP Enterprise Business Community.
    Hope this helps!  
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • LaserWriter Pro 630 two solid orange lights won't turn green.  Put in new toner and test page does print.  Any ideas?

    LaserWriter Pro 630 two solid orange lights won't turn green.  Put in new toner and test page does print.  Any ideas?
    The warmup stage does not seem to go all the way through its normal startup noises and the printer does not get hot.
    Thanks for any help.
    Steve

    See if this link has some useful info:
    LaserWriter Pro 600/630

  • When I upload an app, it asks for my password, then says it's incorrect.  When I reset it (after 3 tries) and put in the new one, it still says it is incorrect.

    When I upload an app, it asks for my password, then says it's incorrect.  When I reset it (after 3 tries) and put in the new one, it still says it is incorrect.  What am I doing wrong?

    I assume that you meant that you reset the password three times. Did you receive any verification that the new password was accepted?
    Sign out of you account, restart the iPad and sign in again. Settings>Store>Apple ID - tap the ID and sign out.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>Store>Sign in again.

  • I have a L7680 All in with two new print heads but the new cyan/magenta shows yellow monitor status.

    I have a L7680 All in with two new print heads but the new cyan/magenta shows yellow monitor status. Ink status, cyan more than 50% and magenta is a 25% w/no low ink warnings... Just ran a clean print head again, print out looks good now but the status of the new cyan/magenta shows yellow monitor status. Is it time to buy another..When I purchased this printer it had to be replaced 3 times because of problems... Just a lemon?
    thx for your help in advance...
    Jim

    Could you share a link to the page?
    Seeing it in context and in our browsers is much easier to debug.
    If not, make sure to run the validator here The W3C Markup Validation Service and clear out any problems. HTML errors, especially structural ones, will cause all kinds of display problems in various browsers/versions/platforms.

  • Business inkjet 2800

    I took one of the print heads from the printer the other day and replaced it later. After that every time a print job is finished the printer goes to align print head mode and spit out a print head alignment sheet. I was wondering what causes this.
    Any suggestions or help will be appreciated.
    Thanks,
    TJ

    That is fixable When you put in a new printhead sometimes it does not do a complete alignment 2 pages. So Go to menu on printer  go to maintenance and do a alignment till you get both pages and you are ready to go.

  • Cross ticking lines appearing on graphic linework on HP Business Inkjet 2800

    Our HP Business Inkjet is printing inch wide bands of cross ticking lines on graphic linework (see image below). We have replaced the printheads, calibrated the linefeed, printheads etc. and even replaced the service station.
    Come to the end of the road on what to try next to resolve this............solutions please!

    They look to be in difrent directiond. try slowing it down go to best setting and se if that helps

  • I put on new songs and it takes off old songs but plenty of memory

    Ok so every time i put on new songs, the new songs show up on my ipod and so do the old ones but when i take it off the dock and play it i find myself without alot of the old songs on there.. i have alot of memory left so i dont know why it just takes off the old songs. i have the "Convert higher bit rate sons to 128" selected and i have only used 149.5mb(about 40 songs) where as i should have up to 240. please help this is very aggravating

    Try:
    iTunes: Finding lost media and downloads
    The ! means that iTunes can find the actual song file. It is not where iTunes thinks it is.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Does anybody know when apple are going to put the new i5 and i7 precessors into the macbook air, does anybody know when apple are going to put the new i5 and i7 precessors into the macbook air

    hi, does anybody know when apple will put the new i5 or i7 processors in the macbook air's

    No one knows for sure nor can we discuss future Apple products here. It's against the TOS.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Business Inkjet 2800 and Server 2008 R2 Enterprise

    We recently updated our servers and needed to re-add the printers.  All went well until we tried to find a driver for the 2800 that would work with our server.  Is there a driver being prepared for this setup or do we throw the printer away and buy something new?  Usually, HP is ahead of the curve, but we can't be the first ones trying to add this printer to this server.  An ideas or solutions?

    Hi Ian,
    Any updates about this issue?
    If there is anything else regarding this matter, please feel free to post back.
    If you have any feedback on our support, please click here.
    Best Regards,
    Anna Wang
    TechNet Community Support

  • Business Inkjet 2800 - "Insert A4 Paper" Despite A4 Paper being present

    Hello, we've a 2800 that's refusing to print, insisting on A4 paper to be installed. Settings on the PC are set to A4, all the paper guides are set to A4 and the printing preferences on the printer itself are A4 also.
    It's been working fine prior to this, but has started acting up today. What else can we check to try and troubleshoot this?
    Many thanks.

  • Business Inkjet 2800 printing slow

    I recently "upgraded" to a 64-bit Vista machine from XP and the 2800 prints extremely slow now. I've updated the drivers to 64-bit. I tried the PCL5 driver, but it wouldn't work right (printed partial images and would not center them). I am now using the PC driver. It prints fine, but takes forever. I ran the Diagnostic utility, but it doesn't see any printers at all and I have the 2800 and a Designjet 430 installed.
    I've tried everything I can think of, but nothing seems to be working.
    Randy

    unplug the power cable from the wall socket/surge protector while the printer is turned on. then press the power button 3-4 times. now plug the power cable back into a wall socket ONLY, and try printing.
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.

  • Business Inkjet 2800 DTN

    The printer shows " Expired printer cartridges", even though they are dated 2014 ??
    Window 7, 64 bit.

    Hello LouChar3,
    Welcome to the HP Forums.
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Can the new white and yellow notepad be changed back to the old one?

    Hi,
    I really like the old notepad. It was beige with lines, like an old piece of paper - like a notepad! (Hence the name). I loved it. I know it was updated a while ago but it's now a plain white background with yellow writing. It's no way near as good! Why did Apple change it? Does anyone know if it's possible to get the old one back?
    Lucy

    Yes. I know how to go to the other screens. For some reason the notepad apps aren't there.
    The password requests are a problem other people seem to have too. It does it all the time even when I'm not using itunes, or the App store - just when I'm typing, searching for something etc. - I've emailed Apple about it.
    Thanks for your help.

Maybe you are looking for

  • Adding Google Adsense to iweb pages

    In a previous posting, I was told that I could add the adsense code into my iweb website. I publish via .mac and cannot locate where the html is on my mac in order to add the code I need...anyone who can walk me through that would be a real angel! Da

  • Huge Number of Deps when Upgrading KDE packages from 4.14 to 14.12

    Hi, I know the KDE upgrade issue is "flavor of the day" at the moment and I have read other threads on it; but so far have not found info which applies to my situation. Note: I only use a FEW KDE apps like Krusader, Yakuake, Konsole, Kcalc and do NOT

  • Can SQLSvr.err be created elsewhere for Crystal Reports 8.x?

    I was wondering if there was any way to relocate SQLSvr.err files that are created in "C:\Windows\Crystal".  Our users are not local administrators of their own PCs, and I'd rather not open write access to that folder if I don't have to. I'd really r

  • Photos missing from Iphoto/ icloud

    Help! I'm a new  icloud user. I had thousands of photos on my mac that I viewed through iphoto. I bought a new mac and transferred the photos to the new mac. Icloud installed in my new mac, but icloud was not on my previous mac. I was able to view al

  • Moving iweb folders

    My husband set up my new web site in iWeb and did it on his computer. I want to review it and change some photos, so he dragged the folder containing his iweb work, located in his Sites folder to my computer over the LAN, thinking this would give me