Business Partner for Issue Management

Hi! Does anyone have documentation on how to create a business partner in transaction BP and have it show up in the Processor list in Issue Management?
Thanks,
Lonny

Hi
for any users of solman issue management you need BP or master data
so you can call Tcode BP_GEN and then choose system followed users to create the BP
Once done you can simply goto BP for that particular user in BP tcode and choose the role as Employee then save it with userID because everybody  is not processor.normally processor is the one providing solution to key users who raise incident
Regards
Prakhar
Edited by: Prakhar Saxena on May 25, 2011 3:39 PM

Similar Messages

  • Deletion of Business partner in Solution Manager

    Hi
         We have created the Business partner in solution Manager not able to
    delete the Business partner.In transaction BUPA_DEL, when we select
    Test run Check only, system gives the message like Business partner can
    be deleted,but when we select other fields and execute,we get message
    like No business partner deleted.
      Regards
      Charan

    Hi charan,
    Just in case if u have missed any of the below notes...
    Note 835936 - Business partner cannot be deleted/archived
    Note 415007 - Deletion of business partners
    Let us know if u have any help from these....
    VBr,
    Sri
    Award points for helpful answers

  • How to Assign Business partner for Vendor Organisation

    Hi,
    We are in SRM upgrade from SRM 3.0 to SRM 7.0.
    For Vendor organisation say 0 50002381  there is no Business partner assigned.
    Under this organisation there are 200 vendors .
    When i run the report: BBP_XPRA_ORGEH_TO_VENDOR_GROUP
    it is showing an error -No partner assigned
    How to assign the Business partner for the organisation .
    Please give your inputs
    Regards
    G.Ganesh Kumar

    Hi Muthu,
    Thanks for the reply
    Already the SAP NOTES : 1372409 is applied.
    I am running the Migration report: BBP_XPRA_ORGEH_TO_VENDOR_GROUP. I am getting an error
    " Check mode 9: :Invalid Object on supplier node"
    How to resolve this issue.
    Already one more thread is open for this issue
    Regards
    G.Ganesh Kumar

  • Business content for Investment Management & Travel management

    Hi All,
    I am trying to install Business content for Investment Management & Travel management, I found the content in 3.x flow with Infosource. once I raised with SAP they also reply with 3.5 flow. I am doubt full to build with 3.5 flow because 3.5 flow SAP support  date over on 31.03.2013. SO how they will support. Please put some light if some one have any idea.
    Cheers
    Anil

    Hello Anil,
    this community deals with the SAP product 'SAP Landscape Transformation'. Can you pls. indicate in which SAP component you have the issue? I guess that the current community might not be the right one.
    Best, Heike

  • Business Process for Scrap management

    Dear,
    I would like to know standard business practice for scrap management.
    Regards,
    Swapnil Vaidya

    General Stock Scrapping: Goods Issue to Cost Center
    Materials are consumed to the cost center as part of the production or for MRO. Therefore the goods movement financial posting is done via the cost center.
    Procedure
    1.     Access the transaction choosing one of the following navigation options:
    Option 1: SAP Graphical User Interface (SAP GUI)
    SAP ECC menu     Logistics  Materials Management  Inventory Management   Goods Movement   Goods Movement (MIGO)
    Transaction code     MIGO
    Option 2: SAP NetWeaver Business Client (SAP NWBC) via business role
    Business role      Warehouse Clerk (SAP_BPR_WAREHOUSESPECIALIST-S)
    Business role menu     Warehouse Management  Receiving
    2.     On the initial screen, ensure that in the top left corner of the screen, the first field shows Goods Issue and the second field shows Other.
    3.     In the field GI for cost center (in the top right corner), enter movement type 551.
    4.     Choose Enter.
    5.     On the Material tab page, enter any material number H11.
    6.     Choose the Items OK checkbox.
    7.     On the Quantity tab page, enter an amount, for example 100.
    8.     On the Where tab page, enter plant Plant 1 (1000), and storage location Returns (1060).
    9.     Choose Enter.
    10.     On the Account Assignment tab page, enter a cost center. (Choose purchase and stores, for example, 1201).
    11.     Optional: If the material is handled in batches, for example Trading Good,Reorder Point,Batch-FIFO: Enter the external batch number on the Batch tab page. If you do not have a external batch number from your vendor you have to maintain an internal batch number. In this case leave the field external batch number empty and the system creates an internal batch number.
    12.     Optional: If the material is serialized, for example Trading Good,Reorder Point,SerialNo: Enter the serial number on the Serial Numbers tab page. If the serial number is unknown, search for one by choosing Find.
    13.     Choose Post.
    To reverse the posting repeat the steps with reversal movement type 552. Alternatively cancel the material document with transaction MBST.
    14.     Optional: Display material document and FI/CO postings.
    Ensure that in the top left corner of the screen, the first field shows Display and the second field shows Material Document. The third field shows the material document number from the last posting, if not, enter the material document number. Choose Enter.
    Choose the Doc.Info. tab page. Choose FI Documents. If the List of Documents in Accounting dialog box appears, choose the document type. Check accounting postings.
    Result
    The goods are removed from stock with quantity and value. The goods value is posted to account and cost center.

  • Problem in installation of Business Content for Solution Manager

    Hi all,
    I have a problem while trying to install the Business Content for Solution Manager. In detail, I cannot install/ see the Process chains. I am not much familiar with Business content installation, so maybe I missed and /or some step.
    Following the instructions from SAP IMG (SPRO/ SAP IMG / Solution Manager / Configuration / Scenario-specific settings / Solution monitoring / BI Reporting / BI Client) , I activated the Datasource 0SM_SMG_ROOT , performed all the steps and installed all the relevant Business Objects  (Infoobjects, Datasources, Infocubes, Infopackages, etc.). All the objects seen from transaction RSA1 seem correctly installed and activated.
    The last step is the installation/activation of the Process chains. This step is executed, but the installation job terminates with messages like  “Infopackage 0SM_XXXX does not exist in D version; activation not possible”. It seems like Process chains are looking for some Infopackage, and these are not present. They are not present indeed, and I don’t know why. The result is that no Process chain is visible from transaction RSPC.
    Am I missing some step, or doing a wrong/ incomplete procedure ?
    Thanks a lot

    HI Saravanan,
                  For Solman Service Desk, the following objects are used :
    Cube : 0CSRV_C01
    DSO  : 0CRM_PROH
    DataSource  :  0CRM_SRV_PROCESS_H
    And apart from this there are some MD datasources, for BPARTNER, USER STATUS, CATEGORY etc.
    Regards
    Mahesh Kumar

  • Business Package for Credit Manager

    Hi Experts,
    I'm trying to install the Business Package for Credit Manager (version 1.4), but I can't find any installation / configuration guides.
    Here's information about the Business Package.
    http://help.sap.com/erp2005_ehp_04/helpdata/en/68/81091aded544349526a18839d760b5/frameset.htm
    So far, it's installed on our Portal but not working. Normally, I have to add system alias names, add roles, configure JCos etc. but I can't find any information about what's required for this Business Package.
    If you can shed any light on how I can get it working on our Portal Iu2019d be very grateful.
    Kind regards,
    Andrew

    Many thanks, great find but still can't get config info for the Business Package...see quote
    In SAP Credit Management you can use a wide range of analysis and processing functions in SAP Enterprise Portal.
    For more information on Business Package for Credit Management 6.01 and SAP Enterprise Portal, see the Internet at http://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio.
    This link doesn't work and it's refering to cofiguring a BP that's two versions older than the one I've installed.
    I've checked the updated Content Portfolio and it just sends me back the link I posted in the question.
    Thanks,
    Andrew
    Edited by: Andrew Barker on Dec 8, 2009 3:17 PM

  • Maintain Reference Business Partner for Consumers

    hi all,
    i have Maintain Reference Business Partner for Consumers  through the spro ( t-code : CRMC_BUPA_CONSUM ) that I find it wrong in another day, so can i delete one of the field that i have mantained for a particular reference bus partner ? if i can...please show me how ? i read once i mantain ..i can not change it , is that true ?
    best regards
    indah puspita

    Hi Indah,
    If you are using version 5.0 try this,
    Start Transaction SE37. Create function module CRM_BUPA_CONSUMER_ADD_SA in function group CRM_BUPA_CONSUMER with short text "Transfers changes ( added sales area) to all consumers". Define the following import parameters:
    Parameter Name: IV_MAX_BLOCK_SIZE
    Type specification: TYPE
    Associated Type: I
    Default value: 100
    Optional: X
    Define the following table parameters:
    Parameter Name: IT_SALES_AREA
    Type specification: LIKE
    Associated type: BAPIBUS1006_SALES_AREA
    Parameter Name: ET_RETURN
    Type specification: LIKE
    Associated type: BAPIRET2
    Optional: X
    Save the changes.
    Create function module CRM_BUPA_CONSUMER_CHANGE_SA in function group CRM_BUPA_CONSUMER with short text "Transfers changes of a sales area to all consumers". Define the same parameters as for the above function module.
    save changes.
    Create report CRM_BUPA_REF_BP_ADAPT_CHANGES in package CRM_BUPA with Transaction SE38.
    Title: "Distribution of changes to reference business partner"
    Type: 1
    Status: P
    Package: CRM_BUPA
    Save the changes.
    Use Transaction SE38 to open report CRM_BUPA_REF_BP_ADAPT_CHANGES and maintain the following text symbols (menu: Goto -> Text elements -> Text symbols):
    For CRM Release 5.0, define additionally:
    010 Sales organization 20   50
    011 Distribution channel 12   50
    012 Line of business 6    50
    On the "Selection texts" tab page (menu path "Goto -> Text elements -> Selection texts"), maintain the following texts for the variables already defined:
    Name: GV_P1
    Text: New sales area
    Name: GV_P2
    Text: Changes to sales area
    Save and activate all changes.
    check the OSS notes 1014356 if the problem still persists.
    reward with points.
    cheers,
    MARK

  • Create business partner for existing employee for SAP version 4.7

    Hi all !
    Do you know of a similar program of function like the HR_SYNC_PERSON in ECC 6.0 but work for version 4.7 ?
    I have look in OSS and SAP forum but I have not found.
    Our company need to create business partner for all existing employee but for our SAP 4.7 version.
    Thanks
    Hugo Nguyen

    USER EXIT
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.sap-img.com/ab038.htm
    http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
    Transaction Code - MM41                     Create Material &
    Exit Name           Description
    MGW00001            Material Master (Retail): Additional Data
    MGW00002            Material Master (Retail): Number Assignment
    No of Exits:          2
    Transaction Code - MM42                     Change Material &
    Exit Name           Description
    MGW00001            Material Master (Retail): Additional Data
    MGW00002            Material Master (Retail): Number Assignment
    No of Exits:          2
    Rewards if useful.........
    Minal

  • Business package for project management

    Hi everybody.
    Does anyone of you know something about any Business Package for Project Management?
    I'd like to integrate this functionality in my SAP Portal 6.0, and maybe any Business Package should be the best way...
    That's all, thanks a lot!!
    Alberto.

    Hi,
       You can download the business package for project portfolio management from sdn.sap.com at <b>SDN > Developer Areas > Portal > Portal Content Portfolio > Browse Content Portfolio > All Business Packages > Business Package for Project Portfolio Management and Design Collaboration.</b>
    The Business Package for Projects, Portfolio Management and Design Collaboration (PPMDC) 4.0 combines portfolio management with operational project management by offering access to SAP cProject Suite (cProjects and cFolders) and SAP xApp Resource and Portfolio Management (xRPM) via SAP Enterprise Portal.
    This is compatible with the NW2004s Portal. We have used this business package for integrating the xRPM system into the Portal.
    Hope this helps!!!
    Thanks,
    Sunitha.S

  • Assignment: Business partner for person '50000029' is not unique

    HI,
    In the past, whenever I use to create the employee using Tcode PA40, the corresponding Business Partner (BP) used to get created.
    But now when I create the employee, BP does not gets created.
    I checked using the program "HR_SYNC_PERSON" and found that whenever I select the employee option and execute it gives the following error(whenever I select the employee option and execute):
    Assignment: Business partner for person '50000029' is not unique
    Can you please help!
    Regards
    Manish

    Oh, I understand.  Earlier I misunderstood your statement.
    So the CP is 50000029.  Regardless, the point is still the same.  SAP tried generating a BP to tie to CP 50000029.  Your system HAS configured a BP number range.  Whatever the next value of your number range is, seems like is already being used. 
    Go to the BP number range config and look at the next value.  Look in transaction BP and enter that BP and see if you get any hits.  My guess is that you will.  You'll likely need to end up changing your business partner number range.  You won't get unique violations for different OTYPE values. 
    What's your existing BP number range next value?  What happens when you search for that value in transaction BP?

  • Error while creating Business Partner in Collections Management

    Hello All,
    I am trying to create Business partners for Customers in Collections Managment, specific to country Luxemburg. The error I am getting says that, 'Tax number category LU2 does not exist' and 'There is no BAPI field to screen field assignment'.
    I have checked V_TFKTAXNUMTYPE table and LU2 is not defined there.
    Appreciate if some one can help to locate where the system is picking up 'LU2' from, and help me fix this issue.
    Thanks in advance,
    Madhavi.
    Edited by: Madhavi99 on Nov 19, 2010 3:52 PM

    Krishna,
    Using T-code SM30, check the table V_TFKTAXNUMTYPE,  and you probably will not see an entry with CA0 in the table. This should be added here in this table (I am not sure how, may be it is a patch sent by SAP or an OSS note..We opened an OSS note and will let you know when I hear from SAP).
    With out adding CA0 in the above mentioned table, you might be using the field for VAT registration field while creating BP master data. I figured out from the way we were trying to create BP, Country code (for example CA in your case) 0 ie., CA0, is for the VAT registration number, Country code1 (for example CA1) is for tax number 1, and CA2 is for tax number 2 fields.
    After the above mentioned table is updated, using BP tcode, this code 'CA0' should be assigend to the business partner number that you are trying to create under identification tab.
    I hope, I made it as clear and understandable as possible. But, if you have any quesitons, please let me know.
    Regards,
    Madhavi.

  • [Business Partner Master Data] Managment of Adresses Matrix (on CRD1)

    Hi everybody,
    I'm trying to update a user-defined field added in right martrix (Address infos) of Addresses panel in the Business Partner Master Data Form.
    I want to check that the value is not empty when user click on update.
    My problem is I want to check the value of my added field for ALL addresses listed in the left matrix (addresses list) but I don't know how to cause I can only get values of current address (I can get value of the address displayed but not thoses of the other address).
    It does't seems to be a DbDatasource on CRD1 (address info table).
    Is there someone who knows how thoses 2 matrix are managed ?
    Thank you for your help

    Hi Loic,
    The contact is manage in the OCPR table.
    You can control the value with the SBO_SP_TransactionNotification stored procedure. You find a lot of example in the forums.
    Regards
    Michael

  • 2 Identification Numbers to 1 Business Partner in Solution Manager

    Hi,
    Can anyone help me on this:
    I have setup a solution manager with one ECC satellite system.
    The user created in ECCstellite system, let call it USER_A, is assigned to business partner 123 in Solman.
    When USER_A create the service desk from ECC, it will be captured into Solman under business partner 123.
    What should I do to let USER_A to access all his issues captured in solmn through the web?
    Please advice.
    What I have tried to do is to create a user ID "USER_A" and assign it to the same business partner 123.
    This is done by inserting the USER_A with different ID number in 123 business partner.
    Is this the right approach?
    I have also try to create another user ID, USER_B, and tie to business partner 123.
    In this case, it is not working as per the approach mentioned above.
    Please advice.
    Regards,
    Cheah

    Hi
    As per your writings i could say you are trying to access the service desk message via web.
    you have to activate webdynpro applications in SICF, please check the blog
    [Re: URL link to open Service Desk message|Re: URL link to open Service Desk message]
    this helps you to access the servicedesk by workcenters.
    The following work center roles will be required to access the same.
    SAP_SMWORK_BASIC
    SAP_SMWORK_INCIDENT_MAN
    and check the below sap notes
    1072324 HTTP Connect and SAP Solution Manager
    1160651 Work Centers: How to Customize (Solution Manager)
    1155893 Work Centers: Incident Management HTTP instead of HTTPS
    Thanks,
    Jansi

  • Business partner address issue

    Hi Experts,
    I am involved in a CRM upgrade project from 4.0 to 5.1.
    There is a typical problem.
    For some business partner types, all the BPs are having double address maintained in the database,i.e., the address of the business partners are maintaned twice, though only one address has been entered for them during BP address entry.
    So whenever we are working with tcodes like opportunity, it is prompting us to select one of the address from the pop-up. Whenever we are entering any partner value in the Partner tab, a pop up comes to select one of the address though both the addresses are same.
    What I saw in ADRC table is there are 2address no.s maintained for the same address.
    No clue why it is happening and how to rectify it.
    Please help, its an urgent issue.
    Regards,
    Sangeeta

    Hi,
       You can write an executable report to determine the duplicate addresses and then delete them selectively from ADRC table using the API
    BAPI_BUPA_ADDRESS_REMOVE
    or using delete statement and then calling
    commit_work
       If you are using mobile sales application and having the same problem, then i would advise you to use Middleware concepts of Bdoc creation to create bupa_main Bdocs with the delta mode set properly for address and then trigger the mobile bridge programmatically to create the relevant sBdocs and replicate to the clients.
      Also, if you would this problem in R/3, then you would need to trigger the bupa_main adapter object upload using request loads.
    Reward if helpful.
    Thanks,
    Sudipta.

Maybe you are looking for