Business sales question

We need to make 5,000 thousand minutes a month with two service reps (this would be more than 100 minutes a day). Is there a Skype Business option for calls made from Puerto Rico to Peru? We have a PBX with the SIP enable option. Can Skype Enterprise provide this service? We would also need the pricing for Peru.
Thanks
Ed

Ed,
Unfortunately Skype Connect ( Skype for SIP ) does not support Skype personal calling packages. So your best option is to base costs on the per minute rate.
Skype calls are based on where you calling not where you are. In your case a call to Peru will be 8.2c/min US Dollars, Peru Lima is 3.1c/min US Dollars and Peru Mobiles are 31.5c/min.
The good thing about Skype Connect is there is no connection fee. However, The minimum duration of a billed Skype Connect call is 30 seconds. After the first 30 seconds, Skype Connect calls are billed at increments of 6 seconds thereafter. Fractions of less than 6 seconds will be rounded up.
If you could get your two service reps to use standard Skype on their screens then you could get them an unlimited Peru personal subscription each for $19.99 per rep. This would be subject to a fair usage limit of 10,000 minutes per user per month, with a maximum of 6 hours per day. No more than 50 different numbers in total can be called per day. Also,this would not include mobiles.
Hope that helps
If you need more help let us know
Tetra4 - Putting Skype to work.
Tetra4 - Putting Skype to Work.
www.tetra4.com

Similar Messages

Pre Sales Questions CS4

I want to ask a pre-sales question on Premier CS4. How do I do that. I cant
see anything on the web, technical support only allows registered software.
Also, does the student version of the above include watermarks on the image output? I am a teacher and have as student son at unversity. What is the cheapest option for Premier CS4 WITHOUT watermarks
Thanks

The
education version does not watermark output.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Pre-Sales Questions: RV220W & SRP 547W

Hi,
Couple of pre-sales questions if you don't mind:
1. Does the RV220W Wireless-N Network Security Firewall allow RADIUS authentication of wireless clients on the WLAN?
2. Does the Cisco SRP 547W Wireless Router allow wireless clients to tunnel into the WLAN using VPN?
Thanks very much.

Yes it supports all the functionality. For more detail you can see the below link
http://www.cisco.com/c/en/us/products/collateral/routers/rv220w-wireless-network-security-firewall/data_sheet_c78-630461.html

Pre-sales Questions

What is the best way to contact Apple and get answers to pre-sale questions? Sometimes these forums work well, other times there is no response. When there is a response, is there a way one can determine it the responder is a representative from Apple?
Is there an 800 number that one can call for pre-sales questions? Unfortunately the closest AppleStore is 60 miles from my home.

1159/3605
Hi jbmth,
Responses you get here are from other users that volunteer to share their Apple knowledge.
The quality is probably the best possible, since every time something goes wrong in one's advice, someone else would quickly jump in and offer corrections/additions.
Determine representatives from Apple:
They have a white apple in front of their names. You won't see an answer from an Apple employee more than once or twice a year here really.
This is most a user-to-user forum.
What kind of info do you need?
Generally speaking, speculation about new products is quite very unwelcome by Apple standards.
Here in the Discussions, it is simply forbidden by the Terms of Use.
I hope this helps.
Axl

North American Student Dashboard Challenge – Business Case Questions

Students, post your business case questions for the North American Student Dashboard Challenge here.
Good luck with the challenge!

Two of the KPIs which need to be included in the dashboard are:
1. Income vs Expenses
2. Performance to Budget
There is no income statement in the attached excel files, we are just given statement of cash flow. For individual items under revenue and expense we need an income statement. This is required for designing dashboard for KPI 1.
For KPI 2, the case study asks to display comparison of Actual vs Budget for 4 revenue items - corporate, individual, foundations, and special events - as a chart component. The attached excel files does not have adequate information on this either.
I see only two spreadsheets in the Excel file JA Financial Statements 2006 - 2011 - 1. Statements of Functional Expense; and 2. Statements of Cash Flow - Table.
Please help what needs to be done here. The case study says to refer - Statement of Activites Tab from JA Financial Statements.xls for KPI 1 and KPI 2. However, there is no such spreadsheet on this Excel file. I have downloaded the project data from the following link: http://www.sdn.sap.com/irj/uac/index?rid=/library/uuid/30ee1571-2533-2f10-31bd-8826243425ee
Thanks,
Chandan

Business Content Questions - Urgent

Can you please help me with the following questions...
1. I installed business content for CRM Sales Activities. I was also successful in loading transaction data. There is some master data that also needs to be loaded, but many of the master data datasources are not available when I checked RSA5 in the CRM system. How should I approach this problem?
   2. When installing business content, if "match (X) or copy" is selected and if we select background installation, will the system overwrite the objects or will it leave it in the existing version?
   3. When activating business content reports, I get the error "BEx transport request xx is not suitable or not available". What could this mean?
   4. After development, do I simply gather all the objects and transport them to QA/PRD or do I have to activate business content in QA/PRD systems also?
Thank You.

Hi,
1.The datasources are:
Opportunity - 0CRM_OPPT_H - Opportunities header
0CRM_OPPT_I - Opportunities Items
Activities - 0CRM_SALES_ACT_1 - Activities
Master data -
0CRM_OPPT_CYCLE_TEXT
0CRM_OPPT_PHASE_TEXT
0CRM_OPPT_TYPE_TEXT
Business Partner
0CRM_BPART_ATTR
0CRM_BPART_TEXT
Products
0CRM_PRODSL_ATTR
0CRM_PROD_ATTR
0CRM_PROD_HIER
0CRM_PROD_IDCMP_TEXT
0CRM_PROD_TEXT
0CRM_PROD_TYPE_TEXT
This is not complete list.
2.Please chk this links:
Re: Confused on Install Business Content
http://help.sap.com/saphelp_sem40bw/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm
Re: Match (or) Copy
About Match(X) or Copy in BC
http://help.sap.com/saphelp_bw33/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
3.Try to get the authorizations if you are transporting from dev to quality or dev to prod.
pls chk whether you stored in $tmp package.
4. yes,you can transport from development ---> Quality --.>production system for the activated business content objects .
Regards
CSM Reddy

Another iWeb/MobileMe business site question...

I have read the ToS and understand that you are not really supposed to use MobileMe to host a website on which items are sold. Is it also against the ToS to have a website that just provides information about your business (product descriptions, contact info, etc)?

There are a lot of iWeb business sites on MMe.
The general impression is that if you want more than just pages, iWeb/MMe is not suitable for business.
So a webstore with a client database, online ordering and paymant is not possible, because MMe does not support PHP, SSI, CGI and MySQL. Cryptic words you need to do business.
But having items for sale and use PayPal is a good combination.
The moderators will no doubt modify this post if I said something that violates the Terms of Use.

Currency Converion and Business Rule questions

Hi all,
I am new to BPC and would appreciate if you can help me answer few of my questions. I was going through how to documents on currency conversion and Business Rules.
1. The Flow in Currency Conversion and Business Rules different?
2. Can Currency conversion be done without defining the Currency Rules?
3. In Business Rules Detail there is a cloumn for Sign. How should one determine what sign should go for a given account?
Thanks,
Diksha.

Venkatesh,
It seems like you are using Company as your Entity type dimension.
Try to change your code to look like this
*RUN_PROGRAM CURR_CONVERSION
     CATEGORY = %CATEGORY_SET%
     SELECT(%CURRENCY_SET_ID%,"[ID]",CURRENCY,"CURRENCY_TYPE='R'")
     TID_RA = %TIME_SET%
     RATEENTITY = GLOBAL
    OTHER = [COMPANY=%COMPANY_SET%]
*ENDRUN_PROGRAM

Business Package Question

All,
We are about to install SAP CRM 2007 business package and I just wanted to check if anyone knows whether it is backword compatible or not.
My other question is let assume we installed this business package to our portal (EP 7.0) but our CRM system is 4.0. Would integration still work? For instance would it impact CRM (4.0) transaction iviews?
I appreciate any help.
Regards.

Hi
It should not affect your existing transaction iViews supposing transaction still exists in the upgraded system.
CRM 2007 is based on WDA as UI where as earlier versions where mainly BSPs,so you need to check what are all thing supported in new version.
regards

T30 Windows Vista Business IE8 Questions

I have a few questions concering Lenovo Laptop, Windows 2000, XP and Vista. I thoght maybe I would post the questions here and see what kind of answers I can obtain.
1. I have three Lenovo laptops one is a t23 and 2 are T30. On the 23 I have windows 2000 with IE 6, on the one t30 I have XP with IE 7, and on the last one I have Vista with IE 8. With IE6 and IE7 when I go to the drivers matrix there is the button for auto detect system. But that button does not come up on IE 8. Can someone tell me why or what to look for? Is this a vista issue or an IE 8 issue?
2. Now again I am not sure where the problem resides but if I type in the T30 part number XXXX-XXX into the block on the lenovo site useing IE6 or IE7 the correct details come up. 2.2Ghz processor and all the other details. However if I type in the same exact number in IE8, now it comes up as a 2.0Ghz processor and some of the other details are different. I am thinking it is either IE 8 or Vista Business. Not sure. I know when I type it in on the Vista machine a different box comes up with the option to continue or cancell.
3. This is more of a driver issue but I dont see on the drivers matrix a driver for my wireless card for Vista. I see one for 98, one for XP, 2000, and OS2 but dont see one for vista. It is a factory install wireless I know that becase the driver if I install XP on the machine from the lenovo site works well. So do I have to go to Cisco or what?
Thanks for any and all info. Have a great weekend.

The Cisco wireless card used in T30 is not supported by Vista or W7. You'll have to move to a newer card, or revert back to XP which would be my suggestion. ThinkPads of that vintage are best utilized with XP at least in my opinion. There is no support for graphics card either.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Third part Sales Question

Hi,
This is nothing related to configuration.
Just want to understand that in a third party sales order, when the 3rd party vendor delivers goods to the customer, then after that how does the delivering plant location knows that the 3rd party vendor has delivered complete / partial goods?
Does he send any kind of acknowledgement in the form of any document to the delivering plant and and after that only the delivering plant bills the customer?
Please let me know in case of any other information required?

Hi,
Thank you all for the answer.
As per GSL, "Once the third party vendor supplies the goods he intimates you".That is exactly what my question is.
Does the 3rd party intimation to the delivering plant comes in the form of any hardcopy and captured in the system .And if it is then which document is generated.Is it the GR that will be generated?
Secondly, as per Sivanand,"In cases of vendor sending the goods directly, there is an acknowledgement like POD sent from customer to you.". Do we need to have any special setting for POD in the item category or document type in the system for this?
Edited by: Christino Ronaldo on Sep 23, 2008 8:32 AM

Business Catalyst Question

Hello. I am very new to making websites and I was asked to make one for a charity. They sell items to raise money for their cause. Anyway, I signed up to use the Business Catalyst and I know what I want to do. How to I use these templates? I see a box that says "hover over what you want to edit and click", but I can't edit anything. For example, changing the text on the template. Can I even do that? Is that what these templates are for? Is there a link to a more in depth tutorial that I am not finding? The ones on here don't answer my questions.

Hi leeee,
See Creating and Editing your Business Catalyst Website Using Dreamweaver CS6 | Learn Business Catalyst | Adobe TV. Also check out the tutorials for BC Business Catalyst Learn & Support
Thanks,
Preran

Business model question

Hi ,
Have the following case (simplified) : 2 tables "projects", "project_details"; columns in project_details : status, modified_date, fk to organization(hierarchical org).
Basically I need to create a business model in "Oracle BI Administration Tool" that can deliver answers about time needed to get from some status to another ( for every project, as well as averages at organization level).
any idea is welcomed !
Thank you !

sorry for my late reply :
Q: are status changes stored as rows or columns ?
A: statuses are stored in "project_details" table , "status" column. project_details table has a record for every status a project ever had, along with a date.
Q : How many changes of status do you need to monitor ?
A: All of them , if possible...there are at least 20 possible statuses a project can have. And therefore more possible changes of status.
Q: step by step or start to finish?
A: step by step and start to finish.
my model should answer to questions like : how much time did projects stayed in some status....how much time from start to finish , or maybe even how much time from a status to another.
The business is not very clear about what it is wanted...but still, I need to provide them something. I'm thinking to simply define and compute on database side , in projects table (which would be a fact table) - so NOT in project_details, a lot of measures like "days_from_start_to_end", "days_NEW", "days_onHold" (and similar for each status)...but this will answer only some of the questions. for the questions about status changes, not sure if it is the best idea.
There is also a problem with the hierarchy of employees involved, simply because the hierarchy is not with a fixed number of levels, and in order to model it in Oracle BI I should come with a clear number of hierarchy levels.
Thank you

Model Object / Business Logic question

Hello,
Question about how to architect the model objects and services in our system. We are defining our own Model Object / Transfer Objects without the use of an ORM tool (long story). Some of these model objects have to maintain Association objects such as:
public class Teacher {
     private List<StudentAssociation> kids;
public class StudentAssociation {
     private Teacher teacher;
     private Student student;
     private Date fromDate;
     private Date toDate;
     // Getters / Setters ....
}My question is, where should the logic be to add, remove student associations? Originally we had it defined in the Teacher model object with:
public void addStudentAssociation(Student student, Date fromDate, Date toDate);
public void removeStudentAssociation(Student student, Date fromDate, Date toDate);But I am hesitant to put such logic in the Model Object. I always thought those should be pretty empty of any sort of business logic. Instead I want to have a TeacherService that does that and instead just a getter/setter on the Teacher object for the Association List. However, in doing that, I find I have to create a new List of Associations then call the setAssociations method on the Teacher object, which seems kind of strange.
Is it bad to put the add/remove method in the model object itself? The remove logic has a bit of business logic in it, so it seems weird being there.

Not sure I can be of much help, but here's my two cents worth:
You have a teacher object and student object. A teacher doesnt really have an association with a student. I think you need another object such as a class object. I class has a teacher and the students (an association can be a business association, social association, etc). That same teacher may be assigned to other classes (provided they dont occur at the same time since the teacher cant be in the two classes at the same time. Likewise, for a student. Complicating things is the fact that a teacher of one class may be a student in another class. Also, a class may exist that has students but no assigned teacher yet (your original idea wouldn't be able to handle this since you will need a teacher before you add students). Another case, you have a class without students. Still another case, you have people (either future students, or teaching staff that haven't been assigned as teachers yet), but no classes yet., I think it would be best to figure out a database schema first (you can use Oracle Lite, MySql, etc).
here is an example:
Assuming you are putting this in a database I would create tables and fields something like this:
Person ((a person is either a student or teacher, or just someone that is no longer a student or teacher but may be one day))
personId not null
firstname not null
middleName nullable
lastname not null
ssn not null
Class ( a class is where a teacher teaches students))
classId not null
nameOfCourse not null
building nullable (may not be assigned yet)
room nullable (may not be assigned yet)
startDate ((when the class starts)) nullable
endDate ((when the class ends)) nullable
teacherId ((this is the parentId from the person table)) nullable
Students
personId ((this is the personId from the person table))
classId
associations:
a class has 0 or 1 teacher,
0 or many students
a teacherId must exist in the person table as a personId
a studentId must exist in the person table as a personId
(if you delete a personId in the person table, it cascades deletes any teacherId or studentId of the same value)
your class has a collection of students. therefore:
private List<Student> students
Your class will also have something like
addStudent(Student student) (throw exception if student already exists) (note you dont pass in the start and
end date since its the class's responsibility for start and end date, not student)
isStudent(Student student) (return true if student is already in class, false if not)
deleteStudent(Student student) ((returns true if student found and deleted, false if student not found to delete)
Your business logic can check things such as if the start date occurs before the end date (an error), you have a class with no teacher or no students, etc. The first case you can do in the database with constraints if you want, but the second you cant since you want to store info for a class even if a teacher isn't assigned to it yet.
One way to do this is to have a validate() function in your class object. The validate() function checks such things as a class with no teacher and returns a collection of warnings if it finds anything wrong. All the above is just something off the top of my head. So there may be some issues with my approach that you will have to work out.
Good Luck!

Business content question

Hi all,
can anybody suggest me any answer on these question know generic data extraction but don't know how to use standard business content.
1 ) How to find right business content of given requirement.
2 ) How to use standard business conent if any example then tell me
3 ) Is in BW any standard business content is present for Material management if yes then tell me how to use by example.
If any link or any example through which i clear my doubts then let me know.
Regards
Ankit

You get the business contents in transaction RSORBCT.
You can also get info on them on help.sap.com

Business sales question

Similar Messages

Maybe you are looking for