Business system for third party webservice

Hi,
I am new to XI and idoc..Kindly help me understanding concept ..
Is it mandatory to maintain the Logical system name for Sender business system in SLD while we are dealing with Third party systems?
I have Webservice to IDOC scenario. For webservice we are using one business service in logical system is configured as legacy system. When i try to post data from pi to SAP..
It gives me error EDI: Partner profile not available when i check status in WE02.
Is it due to legacy name maintained in third party business system this name is not same to the XI Logical name.
Partner profile maintained for both sender and receiver in we20.

Logical system name fro the WebService has to be maintained in SLD and the same name has to be there in ECC in WE20.
Check the below blog:
/people/rajeshkumar.pasupula/blog/2009/03/16/unable-to-convert-the-sender-service-to-an-ale-logical-system
-Supriya.

Similar Messages

Logical Sys Name for Business system in SLD for Third Party

Hi !!
I have little doubt what will be the logical system name for creating Business systems in SLD for third party?
thanks
Gowri

Hi Gowri,
sorry, i dont agree with the other answers. The logical system name is required for ALE partner finding. If you dont want to communicate with IDocs you dont need it. If you want to send messages from third party system to R/3 via IDoc adapter, then you should (can) give a name. It can be configured in IB directory as well (adapter specific identifiers). Choose any name, this name will be used for the partner agreement in R/3.
Regards,
Udo

Can i use technical system type 'third party' for r3 system in idoc2file sc

Hi,
i am doing a sample out bound scenario (idoc 2 file), distributing idoc from sap system to csv file (in same network). in this can i use thchnical system type 'third party' for R3 system. will the scenario work properly or not.
And some times some of the business systems in SLD are not visible in ID, when assigning business system in ID.can any one tell reason for this.
can any one suggest me,........ Thanks in advance & would be appreciated.
Regards
Rajesh

Hi,
 can i use thchnical system type 'third party' for R3 system. will the scenario work properly or not.
--- No u can't use this...Ur technical system must be "WebAS ABAP" only. For file system you use 3rd party system. means ur technical system like follows.
sender
R/3 -- WebAs ABAP
Receiver
File - 3 rd pary system
And some times some of the business systems in SLD are not visible in ID, when assigning business system in ID.can any one tell reason for this.
Click "Clear SLD cache" repeatly for some time in ID, it will come.
regards,
Ansar.

Risk Analysis for Third party ERP system

We want to perform offline risk analysis for third party ERP(SRM) system.... We have already GRC system installed with Global rule set for SAP ERP & want to have another ruleset for offline risk analysis.
Just would like to have a confirmation for below steps & estimated time for this.
Activities Need to be performed from Our side(Client) :-
1) Send the RAR format for Users/Roles/Actions & Permissions.
2) Cross Verify the format.
3) Create the connector for stored files.
4) Upload the files via Data Extraction utility.
5) Generate the ruleset for SRM(third party).
6) Schedule the various background jobs.
Activities Need to be Performed from Third Party - HUBWOO(Owns SRM ERP system) :-
1) Convert users/action/roles and permissions files to RAR format.
Activities need to be Performed from SAP :-
1) Provide the ruleset for HUBWOO SRM system.
Please let me know if I missed any step above & estimated time to complete from our end & did anyone has come across ruleset for HUBWOO system..?
Thanks in Advance!!

Thanks all for your reply,
Alpesh, but still I have small concern here, when SAP provide the ruleset files, it also provides for Oracle, People soft & JDE ERP.
Though these are also third party ERP's for SAP...?
Does it mean that we can'task for ruleset for other third party ERP from SAP...? or does SAP Charge something for it..?
Thanks

Business systems for Soap to file scenario

Hi Experts,
I am working on a soap to file scenario.Which type of business systems shall i create i.e Third party,As ABAP,As Java etc.Please suggest.
Thanks
Veeru

Hi,
Normally Business systems are created in SLD when you are provided with relevant system details. A business service is used in case of the system being an abstract unit.
In your case, it is better to go for Business service because you generally don't have such details for third party system.
Just go through this link for more understanding...
Difference between Business System and Business Service
Regards,
Chandra

Business system for legacy system

hi guys,
Can we create business system for legacy system ?If yes what is the use?
satya reddy

Hi,
Yes you have to create Business system for legacy systems..
It may be the Standalone java . or Third party system..
When you are doing some POC or such type of things create Business Services
also..
A business service represents an abstract unit for addressing message senders and message receivers. You can use a business service to group interfaces.
It is useful to use business services when configuring cross-company processes. Usually, the interface descriptions of the business partners involved are made publicly available. The system landscape is only partly known, however.
See the below links..
http://help.sap.com/saphelp_nw04/helpdata/en/ae/e3bd4f6b61e146ad1384954ecabb41/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ae/e3bd4f6b61e146ad1384954ecabb41/frameset.htm
Regards
Chilla..

SLD - Technical System Types: Third-Party vs. Standalone Java

Hi all,
can somebody explain what´s the difference between the technical system types
"Third-Party" and "Standalone Java"
Please give also one example for a standalon java type.
Thanks,
Kris

Hi Kris,
1. Third Party: Can be any Tech System. For example you want to send a xml message from a file adapter residing on your PC. You can define your PC as a 3rd party Tech/Business System.
2. StandAlone Java: WEBAS640 has bot Basis and Java Stacks. If you installed only the standalone java Stack on a server, then you define a standalone java tech system.
For more info check the XI-3.0 Help documentation.
Regards
Prasad

Business Systems for File to File Configuration

Good day.
We need to created two (2) Business Systems for our File to File Configuration.
Configuration Details:
SWCV must be attached to a Product.
Technical Systems must be Third Party.
Business Systems must be identified as an Application System.
Problem is that i don't know where to start. Can you help me.
Thanks.

Hi Abe
Pls. follow below steps -->
In SLD
1. Create the Product & Software Component for File Systems.
2. Create the Technical systems as Third Party & select the Installed Products for File systems accordingly.
3. Create the Business Systems & select the corresponding technical system.
In IR
1. Import the SWCV from SLD using Tools --> Transfer from SLD option
2. Create the Data Type & Message Type for source & destination .
3. Create the Inbound & Outbound message interfaces
4. Create the Message Mapping & interface Mapping.
In ID
1. Create the scenario
2. Using context menu of Business System. Assign Business system for Source & target systems
3. Create the Sender & receiver file adapter.
4. Create the receiever determination, interface determination
5. Create the Sender & receiver agreement.
- Lalit -

Change Business System for Java Proxy Client

I have created Web AS Java business system for Java proxy.
Is it possbile to send message from client Java Proxy as another business system (Third party)?
For example to specify this system
MessageSpecifier messageSpecifier = proxy.$messageSpecifier();
messageSpecifier.setSenderService("MY_BUSINESS_SYSTEM");
proxy.$messageSpecifier(messageSpecifier);

Yes, it is.
That's the way to do it.
Stefan

PO Creation for third party sales

Hi
We have the scenario Third party sales and High sea sales which is already in use (already configured) , where PR getting generated automatically .
But client requirement is they want the PO to generate automatically by the system the moment i save the sales order .
Where is the setting in the SAP , where system will generate the PO automatically instead of PR
Please suggest

Hi,
Go to VOV7
Select third party item category which u r using in sales order >>> Deatils >>> under transaction flow >>> Tickmark to CREATE PO AUTOMATIC.
If you activate this field, the system automatically generates both a purchase order requisition for third-party schedule lines as well as a purchase order in the background when you save the sales order.
However u can not create PO directly.
Kapil

Order related billing for third party. Third party order..

Hi
While we are running batch job for billing system is throwing below error.
Order related billing for third party. Third party order..

Dear Nortel,
Can you Please check whether, during the item category configuration for TAS (T. Code: VOV7); you have marked relevant for billing indicator as F?
Also, maintained the copy control (T. Code: VTFA) between OR => IVA (for TAS) as follows:
Copying requirement = '013',
Invoiced quantity = 'F', (*)
Quantity/value = '+',
Pricing type = 'G'.
Best Regards,
Amit
Note: I would recommend you to Please go-through following document in full, atleast fo once. This will definitely help you to review your settings for Third Party Order Process Customization.
[Third Party Process|http://yasosap.wordpress.com/2008/10/22/third-party-scenario/]

Reminder for Third Party PO

Hi,
When we use ME91F to transmit reminders, system selects onlt the PO items with GR indicator ticked. But in case of third party order, there is no GR indicator set in the item. So system does not select the PO and hnece PO items for reminders ( in ME91F).
I checked the code, there is a check that if it is PO and wepos is 'space' , it dose not select the PO for reminder.
I want to send reminders for third part po also. What would be the best method to achieve that.
Thanks in advance.

Hi,
You can code based on an item category in PO it will be always S
Field (EPSTP) for third party
BR
Diwakar

ATP check CRM R/3 for Third Party items

CRM .0 does not support an ATP check for Third Party items. This
is axplained in several notes and we also find it in practice in
our system. Actually an ATP check does also not happen in R/3,
if you create the order in R/3, but it takes the delivery lead
time, from the material or the info record, into account for the
confirmation date.
ATP check from CRM to R/3 is triggered by the requirements class
that is determined in R/3 from the item category. So in case
during an ATP chekc from CRM in R/3 no requirements class is
found for the item category, as this is the case for the third
party item category the system does no futher action and does
not take the delivery lead time into account.
This is standard system behaviour.
We are setting up a webshop where the above mentioned could
result in a partial confirmed order during order simulate. The
customer will not be able to view the confirmed date before
actually saving the order.
My question is if anybody ever tried to find a workaround or
solution for this missing functionality.
Best regards,
Pascal.

Hi Pascal,
Middleware setting is only to activate the ATP call from CRM to R/3. It has nothing to do with the pop-ups you are getting. I don't remember on top of my head how to eliminate this situation. I think when you call ATP, the system is validating the partner functions. Check partner determination profile assigned to the transaction type. I believe you need to make some changes to the partner profile. Are you getting these pop-ups only for a particular transaction type?
Do not forget to reward if it helps,
Regards,
Paul Kondaveeti

Component included in SAP NetWeaver Foundation for Third Party

Hi Experts,
Now, our team discussing on how we can use integrate based on ABAP Technology to integrate Enterprise Systems.
Then, we discovered the License, that SAP delivered, "SAP NetWeaver Foundation for Third Party".
I heard this license allows client to develop custom applications on standalone NetWeaver Application Server(ABAP/Java).
I think that the ABAP instance contains SAP_BASIS and SAP_ABA, and I have information that it allows to use also BRFplus,
but it is a little vague what function can be used.
Does anyone knows what component is included that license?
Especially, we want to know whather we can use NetWeaver Gateway with standalone NetWeaver Application Server or not.
Best Regards,
//Naoya Tsugo

Well, the box is checked for that, so I have to assume that it is included.
What is the confusion?
Regards,
Rich Heilman

Proxies for third party

Hey guys
is it possible to create proxies for third party if i have WAS>6.2? suppose we are doing a File to IDOC scenario and have WAS>6.2 then is it possible to do it like Proxy(file)-XI-Proxy(IDOC) or i cant generate any proxies for Flat files?
thanx
ahmad

Answered myself.
no its not possible to create proxies for any third party,ABAP proxies are used to connect SAP systems and JAVA proxies are used to connect J2EE or J2SE .
as long as i have WAS>6.2
hope i m right?
thanx
ahmad

Business system for third party webservice

Similar Messages

Maybe you are looking for