Business system is not displaying in Integration Directory

Hi Friends,
i'm doing RFC to RFC scenario.. here.. upto IR(Integration Repository ) i did every thing fine.. but in ID(Integration Directory ) for assiging business systems i did't get one business systesm. in SLD part every thing i'm getting.. but here for adding the system into my scenario only i'm not getting particular one business system in OBJECTS list...
is it any authorisation problem... because for other users it was getting .. plz suggest me the solution.. for getting
thanks
Babu

Hi Babu,
Once the business system is imported from sld then you can assign that business system in any number of scenarios. You are telling tat other users are using it and if so then it should be listed in the object list..check if any one might have deleted the business system instead of removing from their scenario...and if so...you can see the business system in the imported objects from sld.
Thanks,
Prasanthi.

Similar Messages

Business systems defined in SLD not visible in Integration Directory.

Hi,
After having finished with the SLD configuration involving defining the product, software component, TS and BS. Then I imported in the Integration Repository from SLD and then defined message interfaces, types etc. After that, in Integration Directory when I am trying to assign new business system (to expose business system of sld as service), it is not showing me the newly defined business systems of SLD in the Integration directory.
Please suggest me a possible solution for this.
Thanks,
noor

Hi,
It happens sometimes due to Meta Data Issue,
Go for SLD Cache :
To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
Still If you are not able to see the Business System when trying to import the business system. Go to Objects tab in ID --> Business System and you will find the imported Business System --> Right Click and ADD to Scenario.
Regards
Agasthuri Doss

No service for system SAPNID, client 800 in Integration Directory

Hi All,
I am getting No service for system SAPNID, client 800 in Integration Directory in tRFC monitor (SM58).
My scenario is IDOC to File.
I did following step in R3.
1. Created RFC destination pointing to XI systems (name:XID)
2. Created IDOC port (name: SAPNID) and use above (XID) RFC in RFC destination.
3. Create Partner Type LI (Partner No. 3000) and add message type ORDERS, set the receiver port (SAPNID) created above.
XI Side.
1. Create Technical System (Name : XID)
2. Business Systems (Name: R3XID)
3. In Integration Repository.
 Created Data Type
 Import IDOC ORDERS.ORDERS04
 Created Message Interface
 Created Message Type
 In Mapping Object created Message Mapping and Interface Mapping.
4. In Integration Directory
 Created the Scenario (name : FILE_FROM_IDOC)
 Assign Business Systems as R3XID
 Create communication channel(name: FILE_ORDERS_COM_CHNL)
 Create Receiver Determination
 Interface Determination
 Receiver Agreement.
IDOC is triggered correctly but in tRFC monitor I am getting following error
No service for system SAPNID, client 800 in Integration Directory
With regards
Sunil

Hi Udo/Renjith and Rakesh,
Thanks for quick reply and appreciate you help.
Now I can say that there is some problem with my Technical Systems or Business Systems, let me give you details regarding my Technical/Business systems.
During post-Installation i created Technical/Business System, following are the details regarding these systems.
Technical Systems.Detail
System Name: XID
System Home: crmides
Installation Number: INITIAL Change...
Release: 640
Description:
Administrative Contact:
TMS Domain:
TMS Transport Group Name:
Clients: 100 800 Add...
Message Server: XID crmides
Central Application Server: crmides_XID_00
Secondary Application Servers: Add...
Internet Transaction Servers: Add...
Installed Products: SAP EXCHANGE INFRASTRUCTURE, SAP EXCHANGEINFRASTRUCTURE 3.0 XID
SAP R/3, 4.5B XID on crmides
SAP R/3, 4.6C XID on crmides
Add...
Installed Software Components
Business Systems:
1. R3XID
2. SAPNID
Earlier I have only one Client (100) and One Busines Systems (R3XID)
My XI Systems is XID Host : crmides Client : 100 System Number : 00
My R3 Systems is NID Host : netbw Client : 800 Systems Number : 02
Business Systems Detail
Name: R3XID
Description:
Administrative Contact:
Business System Role: Integration ServerApplication System
Pipeline URL:http://crmides:8000/sap/xi/engine?type=entry
Integrated Business Systems: SAPNID
Group: (No Group Assigned)Edit Groups...
Transport Targets:
Technical System: XID on crmides Change...
Client: 100 of XID
Logical System Name: SAPNID
Installed Products: SAP R/3, 4.5B XID on crmides
SAP R/3, 4.6C XID on crmides
SAP EXCHANGE INFRASTRUCTURE, SAP EXCHANGEINFRASTRUCTURE 3.0 XID
Software Components: ABC, 1.0 of knack
R/3 CORE 4.5B
SAP ABA 4.6C
SAP ABA 640
SAP APPL 4.6C
SAP BASIC JAVA LIBS 6.30
SAP BASIS 4.6C
SAP BASIS 6.40
SAP GUI FOR WINDOWS 4.5B
SAP GUI FOR WINDOWS 4.6C
SAP GUI FOR WINDOWS 6.20
SAP HR 4.5B
SAP HR 4.6C
SAP ITS 4.6B
SAP ITS 4.6C
SAP J2EE ENGINE 6.30
SAP J2EE ENGINE CORE 6.30
SAP JAVA TECH SERVICES 6.30
SAP JCO 6.30
SAP SOFTW. DELIV. MANAGER 6.30
XI ADAPTER FRAMEWORK 3.0
XI CONNECTIVITY SE 3.0
XI TOOLS 3.0
During Post Installation I had one Technical Systems (XID) and one Business Systems (R3XID), after that I created one more Business Systems (SAPNID).
SAPNID Business Systems Detail
Name: SAPNID
Description:
Administrative Contact:
Business System Role: Application System
Related Integration Server: R3XID
Group: (No Group Assigned)
Transport Targets:
Technical System: XID on crmides Change...
Client: 800 of XID
Logical System Name: SAPNID
Installed Products: SAP R/3, 4.5B XID on crmides
SAP R/3, 4.6C XID on crmides
SAP EXCHANGE INFRASTRUCTURE, SAP EXCHANGEINFRASTRUCTURE 3.0 XID
Software Components: ABC, 1.0 of knack
R/3 CORE 4.5B
SAP ABA 4.6C
SAP ABA 640
SAP APPL 4.6C
SAP BASIC JAVA LIBS 6.30
SAP BASIS 4.6C
SAP BASIS 6.40
SAP GUI FOR WINDOWS 4.5B
SAP GUI FOR WINDOWS 4.6C
SAP GUI FOR WINDOWS 6.20
SAP HR 4.5B
SAP HR 4.6C
SAP ITS 4.6B
SAP ITS 4.6C
SAP J2EE ENGINE 6.30
SAP J2EE ENGINE CORE 6.30
SAP JAVA TECH SERVICES 6.30
SAP JCO 6.30
SAP SOFTW. DELIV. MANAGER 6.30
XI ADAPTER FRAMEWORK 3.0
XI CONNECTIVITY SE 3.0
XI TOOLS 3.0
I do not know whether SAPNID is required or not, earlier I used R3XID as Business Systems at the time of configuration now I changed it to SAPNID. I am getting the same error in both the case.

No service for system ..PI, client. in Integration Directory -IDOC

Hi,
I am getting following error when try to post IDoc frm SAP to SAP XI:
No service for system ..PI, client. in Integration Directory -IDOC
I have verified the following transactions:
port,RFC destinations are correct in SAP and XI systems(verfied in SM59,IDX1,BD64 and in SLD)
Please help me here

This error was resoved now.
What is the cause?
In ID, Adapter spefic Identifiers for SAP Business System does not have R/3 System ID and Client and It has only Logical System name. Its bcoz of cache prob between XI and SLD.
Resolution:
There is an option to refresh, so that Adapter specific identifiers was refreshed from SLD and values got populated for R/3 System ID and Client name.
Generally when Business System is imported from SLD to XI, these 3 parameters(Logical System name,R/3 System ID and Client) will populate automatically.
Thanks for Inputs:)

No service for system SAPDRT, client 011 in Integration directory

Hi Experts,
Currently i am working on IDOC to file scenario.
IDOC is sent out of ecc 6.0 succefully with STATUS CODE 03.
But its not reaching the Xi sytem.
on the ERP side i am geeting an error in the transaction SM58 Saying that
"No service for system SAPDRT, client 011 in Integration directory"
What may be the issue ?
I have tries all the soultions that are in SDN.
Thanks in advance and best regards,
Anil

Hello Anil
This error will come if IE not able to match the parameters of your idoc control record
SNDPOR and MANDAT fields with Business system/services R/3 SystemID and port parameters
so go to your business sender system/service and check these parameters are configured as expected of idoc
Rajesh

No service for system SAP***, client 001 in Integration Directory

Hi,
We are doing a File to IDOC scenario.
The file is picked up and the idoc is getting generated in XI but this idoc is failing at XI outbound with the following SM58 error:
No service for system SAPABC, client 001 in Integration Directory
where ABC is my XI system ID.
I have searched in sdn and tried all the possible solutions given in the previous blogs with same subject but not able to resolve this error.
Any help will be greatly appreciated.
thanks in advance
Jagruthi

Hi Rao,
please check given link may be useful for you
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
No service for system ... in Integration Directory
Regards,
amit

No service for system SAPABI, client 800 in Integration Directory

Hi,
We are getting the error in BI "No service for system SAPABI, client 800 in Integration Directory", when we extract the data from R/3 (ECC6) into BI System. It was working fine earlier, till XI-BI integration was done.
But, After XI integration is done in BI system we are getting this error, when ever we try to load the data from source system. The XI integration is removed now, but the error still continues.
The source system is ok and could able to replicate the data from R/3 into BI. Is there any XI related customizing need to be removed from BI?, so that it directly goes to the source system for data load, instead of hitting the Integration Directory, which is part of XI.
It would be great, if someone can give a solution for this.
Thanks in Advance,
SAP Admin.

Hi,
First check at BI side transaction: SICF there services are properly configured or not, the services should be in Active state.
Second you must check transaction: SXMB_MONI here you can check what ever the Reports or Webservices are coming from out bound to inbound.
1. first check out bound in that server you type SXMB_MONI there u can see Flag that should be in black. If it is Flag is in Red then the Report should be stoped there it self.
2. Once it came to receiver side then u must check at inbound server by typing transaction: SXMB_MONI by checking that flag you will know what might be the problem.
Once check ur RFC connection also because you can get problem from RFC connections also.
Sateesh

No Service for system X, client Y in Integration Directory

Hi All,
I have the XI, SAP R/3 and BI system setup on the same machine. I am doing a Idoc to File scenario. This is the first development after fresh installation.
I configured the ports(we21),partner profile(we20),distribution model(bd64) etc and ports by idx1.. After all this, I generated the Vendor through bd14 and getting the following error (No Service for system X, client Y in Integration Directory) in sm58. But when I check the outbound message in we05, its successful. Can someone please help me on this!!
Thanks
Varun

Hi
Go through this
first clear the SLD cache, by choosing from the menu Environment --> Clear SLD Data in ID and open your scenario and see if you any Business System assigned to it, you check that by going to,
your scenario --> service without party --> business system, and if there are no business system existing, you have to assign a business system.
Also have a look at the following thread,
No service for system ... in Integration Directory
Thanks

Business system RD1 Not Found

Hi All,
when i was trying to import the tpz from XI Dev into QA (XI Dev and XI QA are using the same SLD)
i get the error:
Import failed because of business system transfer of object Service | RD1: Obligatory transport target for business system RD1 not found in System Landscape Directory
But i already have the RD1 in the SLD and define the transport target, the target business RQ1 is already in it.
what's more SLDCHECK is fine, and i try to clear sld cache but without any luck.
Please help
thanks a lot

Hi,
It seems like you have different GUIDs for SCV within XI system and SLD. Thus while transporting it will create the problem, as the GUID conflicts with SLD side GUID.
Changing the GUID is possible but must be done in a consistent way within the XI system and SLD
A comprehensive guide about how to change SWCV-GUIDs for XI
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/adb8f911-0d01-0010-82b9-a8134d7d89d5
Thanks
Swarup

Obligatory transport target for business system SAPR3D not found in System

HI All ,
We have installed New PI 7.1 system and stared migrating the interfaces from XI 3.0 to PI 7.1 . in Devlopement system .
IR object have been successfully deployed but while delopying ID objects got the following error . Obligatory transport target for business system SAPR3D not found in System Landscape Directory.
When I checked with business system transport target was not defined ., Please suggest how to go ahead further .
Thanks ,
Prakash

Hi Ravi,
Please go through below disucssion it is on the same line of your question.
Transport target for business system not found in System Landscape Director

Business system does not exist in the SLD

hi,
I am trying to export the ID objects into QA, when i get the error saying that "Business system D01 does not exist in the SLD".
I have created the Transport target for the D01 business system in the SLD to point to the QA system T01.
When i try to export the objects and reimport them into QA i get the above error.
Any ideas what could be missing?
Thanks,
Tirumal

hi,
Prashant -
I did refresh the cache but no luck. I still see only the QA Business system but not able to see the Dev SLD Business systems at all.
Stefan -
They are pointing to the same sld. If i do an sldcheck from QA XI Server it directs me to the dev SLD. So this is good.
I am using only 1 SLD. Is there a way that i can tell QA to look for DEV SLD instead of QA SLD?
Thanks,
Tirumal

SLD - Export Business System: 404 Not found while downloading ZIP-File

Hi, well we did a complete export of SLD to another XI-System. This worked fine so far except that one business System was not properly "installed" in SLD.
Therefore we want to export this single business system via option "Export" but we receive an 404 Error: The requested resource does not exist. when trying to download the given zip-file!
I read in OSS that this error occurs in XI-systems with SP <12 and SAP suggest to upgrade to 12
Well that's not an appropriate solution!
Does somebody can help how we can download this zip-file with the business system in it?!
Or is there some workaround i am not familiar with?!
Thx in advance!

Ok Prateek,
we had two same Technical Systems with two differnet hosts given in the SLD of DEV & PROD System.
After decision to devide both systems, means to seperate SLDs we copied the whole SLD from DEV to PROD. So there were some conflict with this two technical systems because during import of CIM-Data the business systems got switched up.
Therefore we thought we have to export the business system given in DEV SLD to import this business system in PROD SLD. But the workaround is that we simply assign the wrong imported business system to the right technical system (in PROD SLD)
That's it! br

When we run the FLEET transaction in SQ00, system is not displaying data.

Hi,
When we run the FLEET transaction in SQ00, system is not displaying data. If I enter the same values in selection in quality system, I am able to see. But with the same values is not storing in production, the output tale is not getting values.
Can any one provide the solution...?
Thanks....
Thanks & Regards,
Siva

Hi,
When we run the FLEET transaction in SQ00, system is not displaying data. If I enter the same values in selection in quality system, I am able to see. But with the same values is not storing in production, the output tale is not getting values.
Can any one provide the solution...?
Thanks....
Thanks & Regards,
Siva

SLD Business system not appearinn in Integration Directory Configuration

Hello,
I have configured a business system in SLD(defined a Technical system,assigned it to a business system),but when i go to
Integration directory and assign a business system without a partner,I am not able to see this business system.
can any one please help.
regards
kaushik

environment -> clear SLD cache

Business system from SLD not visible in Integration Directory

Hi,
As on the project I do not have access to the SLD, another team created new business systems there. However, when I try in the Integration Builder(Configuration) to assign the newly created systems, I cannot see them on the "Select business systems" page.
What do you think might be the cause of that? (the SLD and the XI systems are fully customized and have been used successfully until now)
Thanks in advance,
George

Hi,
In Integration directory -> Environment(Menu) ->
Click on Clear SLD Data cache and try again.
If you are unable to get even after doing above step check whether cache is up to date or do full cache refresh. This will solve your problem.
Regards,
Sakthi

Business system is not displaying in Integration Directory

Similar Messages

Maybe you are looking for