Business View data foundation with dynamic data connection hangs

We are running Business Objects XI 3.0 with Crystal Reports 2008 and Business View Manager 12.0.0.683. In the Business View Manager tool, when I try to open a data foundation that uses the ACD Dynamic data connection, it hangs with the hourglass icon. I have left it trying to open for at least an hour before killing the Business View Manager with the Windows Task Manager. Data foundations using a static connection open fine as do the elements and views based on the data foundation with the dynamic connection. The static data connections included in the ACD Dynamic connector point back to an Oracle Server. Any ideas how to get the data foundations to open so I can edit our custom business views?
Thanks,
Kathy

I created some Views to pull the data in from the Oracle side.

Similar Messages

Error creating a multisource data foundation with generic odbc connection

Hi all,
we've created a generic odbc datasource connection to a Pervasive database.
When creating a single source data foundation and universe with this connection everything works fine.
When we try to create a multisource data foundation we can add the connection,
but while trying to expand the connection we get the error message "Owners are not available".
Same message when trying to inert a table.
(We've created both a 32 bit and a 64 bit DSN)
System: BO 4.1 SP2 PL3
Any ideas?
Thanks,
Silvia

Hi Silvia,
The generic odbc is not a supported connection for a multisource universe.
This information is available in the product availability matrix.
1. Log into the SAP Support Portal
2. choose the Tab for Release & Upgrade Info
3. Choose the Link Product Availability Matrix.
Hope this helps!
Jacqueline

Connect an 1-D array of cluster of 3 elements with dynamic data

hi everybody.
I am trying to wire an 1-D array which consists of a cluster of 3 elements with dynamic data. The error that appears says that I'm trying to "connect two terminals of different types". Actually, what I want to do is write to a file the FFT data produced by the Spectral Measurements vi. In order to write to a file, I am using the Write to Measurement File vi, but I don't know if this is the right way to do this. Has anyone any idea about this problem, because I'm out of ideas....
Thanks a lot!!

ok! This works really good! thanks a lot! now i'm facing an other problem...The output file does not contain the right data. I want to collect the FFT (frequency vs. amplitude) of a time signal and it gives me the record length and the sampling rate instead.
For example, if I use a sampling rate of 300 ksamples/sec and a record length of 1000 sampling points, the file to be created has one column containing the record length e.g.
0
1
2
3
498
499
and on more column containing almost zero values and the value of the sample rate. Do you have any idea why this is happening?
Thank you!!

Xml conversion of data refs with dynamic type

Hi Colleagues,
I have to create an XML from a TYPE REF TO DATA, where this data is created using a dynamic internal table. By dynamic internal table i mean that the internal table is created dynamically using the class method cl_alv_table_create=>create_dynamic_table.
Now the problem that i face is when i use the statement:
CALL TRANSFORMATION id
      SOURCE jsag_data = im_context_b64
      RESULT XML lv_xml
      OPTIONS data_refs = 'embedded'
              value_handling = 'move'.
to generate the XML i get a dump of type CX_XSLT_SERIALIZATION_ERROR saying "The ABAP data cannot be serialized."
I found a solution to avoid the dump by adding the additional option " TECHNICAL_TYPES = 'ignore' " to the CALL TRANSFORMATION statement, like
CALL TRANSFORMATION id
      SOURCE jsag_data = im_context_b64
      RESULT XML lv_xml
      OPTIONS data_refs = 'embedded'
              value_handling = 'move'
              TECHNICAL_TYPES = 'ignore'.
But, using this addition the dynamic type ref to data part is totally ignored from the XML generation.
If I use a specific DDIC table type to create the data, we do not face this issue and the XML is generated as desired
Does anyone have a solution to this problem as it has become a sort of blockade for our development?
Thanks and Cheers,
Gaurav.

Hello,
I reached same problem with dynamic data references, the only solution I got is to used global DDIC types (also for table types !!) when creating data which needs to be serialized.
The options technical_types = 'ignore' doesn't solve the problem - it just instructs the parser to skip data references without global ddic type. The options value_handling = 'move' is very helpful as XML serialization is very picky about values beeing serialized.
Here is summary of my observations:
- Global DDIC type has to be associated with data reference, otherwise only technical type is there and this is not supported (you can use OPTIONS TECHNICAL_TYPES = u2018IGNOREu2019 but this will just skip the data to be serialized to XML) u2026
- The above means that if you are serializing data reference to table then you have to have also global DDIC type for the table-type !! Unfortunatelly there is no default table type available for transparent tables u2026. They are treated as structures not as table-types u2026 thus:
- CREATE DATA lr_data TYPE <global_ddic_structure> - can be serialized
- CREATE DATA lr_data TYPE STANDARD TABLE OF <global_ddic_structure> - cannot be serialized
- CREATE DATA lr_data TYPE <global_ddic_table_type> - can be serialized
- !! Unfortunatelly !! CREATE DATA lr_data TYPE <type_pool_ddic_structure/ type_pool_table_type> - also cannot be serialized u2013 this is pitty u2026 this should be supported u2026.

How to use a queue with dynamic data

When using a collector I have found that it significantly slows down my loop times. I am using LabView7.1 on a Dell PC with Windows XP. If I use a queue with dynamic data do you think that will require less of my processor and allow for faster loop speeds?
I have created a queue using dynamic data in one loop and I want to retrieve all available samples each iteration in a slower loop. If I use the flush queue I get a 1d array of dynamic data. What is the best way to convert the 1d array of dynamic data so that the array of dynamic data is consolidated back into a single dynamic data type? Any help would be much appreciated.

Hi Dennis,
You could for instance wire the array to an auto-indexed for loop. I attach an example. I assume you wish to concatenate the arrays a singel waveform.
Hope it helps,
Pelle S
District Sales Manager
National Instruments Sweden
Attachments:
Dynamic queue.vi ‏245 KB

Error in viewing data in a data template with multiple data sources

Hello,
I have designed a data template with two data sources.One is from DEPARTMENTS table and the other datasource is a xml file.Following is the code for the data template :
<dataTemplate name="EmployeeListing" dataSourceRef="demo">
<parameters>
<parameter name="p_DEPTNO" dataType="character" defaultValue="20"/>
</parameters>
<dataQuery>
<sqlStatement name="Q1">
<![CDATA[SELECT DEPARTMENT_NAME,DEPARTMENT_ID,LOC from DEPARTMENTS]]>
</sqlStatement>
<xml name="empxml" expressionPath=".//ROW[DEPARTMENT_NAME =$DEPARTMENT_NAME]">
<url method="GET" realm="" username="" password="">file:///D:\OraHome_1\xmlp\XMLP\DemoFiles\Employee Salary Report.xml</url>
</xml>
/dataQuery>
</dataTemplate>
The problem is when i am trying to view the data, only data from SQL Query Q1 is getting displayed and the data from Employee xml is not at all getting displayed.
Could anyone please let me know what i am missing?
Thanks
Nutan
Edited by: user609971 on Oct 23, 2008 8:06 AM

This is from Documenation sample....
Did you see the data structure section, where you say, how you wanted the columns ?
<?xml version="1.0" encoding="WINDOWS-1252" ?>
<dataTemplate name="Employee Listing" description="List of Employees" v
ersion="1.0">
<parameters>- Defines a single parameter for the Department Number
- with default of 20:
<parameter name="p_DEPTNO" dataType="character"
defaultValue="20"/>
</parameters>
<dataQuery>
<sqlStatement name="Q1">
<![CDATA[SELECT DEPTNO,DNAME,LOC from dept
                  order by deptno]]>
</sqlStatement>
<xml name="empxml" expressionPath=".//ROW[DEPTNO=$DEPTNO]"> - Defines name
- and link to DEPTNO in Q1
<url method="GET" realm="" username="" password="">
file:///d:/dttest/employee.xml</url> - Defines url for xml data
</xml>
</dataQuery>-
<dataStructure>- The following section specifies the XML hierarchy
- for the returning data:
<group name="G_DEPT" source="Q1"
<element name="DEPT_NUMBER" value="DEPTNO" />
<element name="DEPT_NAME" value="DNAME"/>
- This creates a summary total at the department level based
- on the salaries at the employee level for each department:
<element name="DEPTSAL" value="G_EMP.SALARY"
function="SUM()"/>
          <element name="LOCATION" value="LOC" />
<group name="G_EMP" source="empxml">
<element name="EMPLOYEE_NUMBER" value="EMPNO" />
<element name="NAME" value="ENAME"/>
<element name="JOB" value="JOB" />
<element name="MANAGER" value="MGR"/>
<element name= "HIREDATE" value="HIREDATE"/>
<element name="SALARY" value="SAL"/>
</group>
</group>
</dataStructure>
</dataTemplate>

My iphone 5 is problem facing like that. when i switch off my iphone5 then plugh for charge with data cable or charger adapder or only data cable with no power connect phone is starting why? means on my phone Why? any one can explane this matter please. s

my iphone 5 is problem facing like that. when i switch off my iphone5 then plugh for charge with data cable or charger adapder or only data cable with no power connect phone is starting why? means on my phone Why? any one can explane this matter please. switched off my phone but on without power button . what is the problem?
Thanks
s.m slim

all iphone is same like that

JasperException, calling tag with dynamic data

Hello
I want to call a tag which I have written with dynamic data.
I can call the tag like this, and it works fine
<cm:getCalendar year = "2" week = "51" />But I don't want the input to be hard coded.
Therefor I have tried to insert GET data to the tag like this
<cm:getCalendar year = "<%= request.getParameter("year")%>
" week = "<%= request.getParameter("week")%>" />Or like this
<cm:getCalendar year = "%{#request.yearNr}" week = "%{#request.weekNr}" />The %{#request.yearNr} should be struts 2 specific I think.
In both this cases I get this exception
org.apache.jasper.JasperException: /calendar.jsp(25,0) According to TLD or
attribute directive in tag file, attribute week does not accept any expressions
Is there a way which I could insert data dynamic to my own tag?
Here is the TLD file
<taglib>
<tlib-version>1.0</tlib-version>
<jsp-version>1.2</jsp-version>
<short-name></short-name>
<tag>
       <name>getCalendar</name>
       <tag-class>taglib.PrintCalendar</tag-class>
       <body-content>JSP</body-content>
       <attribute>
            <name>year</name>
            <required>true/false</required>
       </attribute>
       <attribute>
            <name>week</name>
            <required>true/false</required>
       </attribute>
</tag>
</taglib>

I change the tld to
<taglib>
<tlib-version>1.0</tlib-version>
<jsp-version>1.2</jsp-version>
<short-name></short-name>
<tag>
<name>getCalendar</name>
<tag-class>taglib.PrintCalendar</tag-class>
<body-content>JSP</body-content>
<attribute>
<name>year</name>
<required>true/false</required>
<rtexprvalue>true</rtexprvalue>
</attribute>
<attribute>
<name>week</name>
<required>true/false</required>
<rtexprvalue>true</rtexprvalue>
</attribute>
</tag>
</taglib>

How to call javascript function with dynamic data in display tag

Hi,
Iam new to pagination concept. Iam using display tag to display rows in jsp by strtus.
I have a problem when calling the javascript function using ahref in attribute in display tag.
<bean:define name="form1" property="EditDetails.List" id="ListDisplay"/>
<display:table name="pageScope.ListDisplay" cellpadding="0" cellspacing="1" pagesize="10" partialList="false" size="listSize" requestURI="">
<display:column property="poNo" href='javascript:searchEditDetails("./submitOrder.do? actionID=getMISLoadEdit&poNumberSel=<%=((com.po.bean.EditDetails)poListDisplay).getNo()%>&statusIdSelected=<%=((com.po.bean.EditDetails)ListDisplay).getStatusId()%>")'
title="Number"/>
<display:column property="strDate"title="Date" />
<display:column property="orderValue"title="Order Value(INR)"/>
<display:column property="stringRequestedDeliveryDate"title="Suggested Delivery Date"/>
<display:column property="statusDescription" title="Status" />
</display:table>
The above code display the data in row format is working fine when I click the No It thow javascript error and its not redirecting to the other page.
When I try this with ordinary struts its working fine the code is:
<logic:iterate id="polist" name="Form1" property="EditDetails.List" indexId="i" type="com.bean.EditDetails">
<tr>
<td ><a href="javascript:searchEditDetails("./submitOrder.do?actionID=getMISLoadEdit&NumberSel=<%=((com.bean.EditDetails)polist).getNo()%>&statusIdSelected=<%=((com.bean.EditDetails)polist).getStatusId()%>")"><html:hidden name="polist" property="No" write="true" /></a>     </td>
<td><html:hidden name="polist" property="strDate" write="true" /></td>
<td><html:hidden name="polist" property="orderValue" write="true" /></td>
<td><html:hidden name="polist" property="stringRequestedDeliveryDate" write="true" />     </td>
<td><html:hidden name="polist" property="statusDescription" write="true" /></td>
</tr>
</logic:iterate>
Please help me how to call javascript with dynamic data.
Thanks in advance

The ADF Mobile Container Utilities API may be used from JavaScript or Java.
Application Container APIs - 11g Release 2 (11.1.2.4.0)

SSRS 05 snapshot with dynamic date parameter

I want to use snapshot for a SSRS 05 report due to high volume of report data. This report uses 2 date parameter which will keep changing every month ( mmyyyy) format. I read many blogs but it seems I can not have snapshot report in dynamic date situation.
Can someone please suggest if there is any workaround to use snapshot with dynamic date parameter . The report server version is 2005.
Gaur

Hi Gaur,
In Reporting Services, the snapshot is a report that contains layout information and data that is retrieved at a specific point in time. There’s a couple of requirements in order to use a snapshot:
Stored credentials for the data source.
Defaults for all Parameters.
Based on my research, we can use snapshot with dynamic date parameter. When we select 'Render this report from a report execution snapshot’ with a schedule and Apply in Execution tab, a snapshot is created and subsequently refreshed on a schedule. When we
render the report at a time, the report would be rendered with the latest snapshot layout information and data, then use the current parameter value to filter the snapshot report data. In this way, the current data would be different from the snapshot report
based on the current parameter values, but we can still use snapshot with dynamic date parameter.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Not able to save date column with custom date format. in OBIEE 11g

Hi,
I have migrated one report from OBIEE 10g to 11g. There is a date column with customized date format(i.e. Default format is 'dd-MMM-yyyy' and I have used 'MMM-yyyy').
But when I use this custom format and try to save the report in 11g its giving this below error.
''Catalog object privilege validation failed for user to path /shared/ALM BI/Finacial Results/History Income Statement Detail.
You do not currently have sufficient privileges to save a report or dashboard page that contains HTML markup.
This HTML might be present in column headings, table headings, text views, narrative views, the print header,
or the print footer and must be removed before saving.''
Please let me know what changes I need to do for this.
Regards,
Ambika Nanda.

Hi ,
privilage issues...check the security settings once..
Thanks,
Ananth

Query To update a date column with a date of my interest

All,
How to update a column in a table which is in date format with a date of my interest??
Pls suggest.

Please detail :
1. what exactly you are trying to do
2. what exactly you have done
Nicolas.

Filling bc travel data model with test data

Hey i read somewhere that there is a app to fill the bc travel data model with test data.I been searching but havent found one in the preview version.Please help me if anyone knows how to get it done.Filling it manually is taking a whole lot of time.

Go to the ABAP Editor (SE38) and execute the SAPBC_DATA_GENERATOR program. This program generates suitable sample data in the tables of the flight data application.

Connect 1 D array of cluster of 2 elements with dynamic data

Hello
The type of source is 1D array of cluster of 2 elements and the type of sink is dyanamic data. Can any one guide me how to connect these 2 elements together. Any response would be highly appreciated.
Thanks

First, this question would more appropriately be posted to the LabVIEW Board. It is not a signal conditioning issue.
The dynamic data type (DDT), sometimes referred to as the "evil dynamic data type," completely obscures the internal data structure. The only way someone could help is if you tell us what the source is expecting the internal data structure to be. The only objects which want DDT inputs are Express VIs, which are also good at obscuring thier contents. Implementing the sampe funcitonality with standard VIs might be a better approach.
You also have not completely specified the source. What are the data types of the cluster elements?
Lynn

What's wrong with dynamic data?

I am starting this thread to showcase what I might call "dynamic data abuse": The use of dynamic data where it has no business to be used (does it ever?).
Everybody is invited to contribute with their own examples!
One of the problems when operating on dynamic data is its opacity. We can never really tell what's going on by looking at the code. It also seems to hide serious programming mistakes by adapting in ways to mask horrendous code and making it seemingly functional, glossing over the glaring programming errors.
To get it all started, here are a few recent sightings:
(A)
(Seen here). No Kidding! The users joins a scalar with a waveform, then wires the resulting dynamic data to the index input of "replace array subset". He cannot see anything wrong, because the program actually works (coercing the dynamic data to a scalar will, by a happy coincidence, return the value of the scalar joined earlier. I have no idea what thought process led to this code in the first place (maybe just randomly connecting functions until the result is as expected? ).
(B)
(seen here)
What's wrong with simply branching the wire???
(C)
I don't remember the link, but here's how somebody transposed a 2D array a while ago (bottom part of image). No way to tell from looking at the code picture! (The "FromDDT" and "ToDDT" need to be configured just right ...).
ARRRRGH!
LabVIEW Champion . Do more with less code and in less time .
Attachments:
join.png ‏2 KB
split.png ‏3 KB
DynamicTranspose.png ‏18 KB

Here's another one for you. Found here:http://forums.ni.com/t5/LabVIEW/Program-unresponsive-after-a-dialog-box-input/m-p/2447608#U2447608
Put a bunch of booleans into a Combine Signals and then do a Dynamic Data to Boolean Array.
I supplied the much more cleaned up version of the code below.
EDIT: I just realized I needed to subtract 1 frm the power before using the Scale by Power of 2. Oops.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Button Press Decoder_BD.png ‏41 KB

Business View data foundation with dynamic data connection hangs

Similar Messages

Maybe you are looking for