Button display problem in APEX!!

Hi All,
I have created two buttons as mentioned below for both buttons# Now i need to display both buttons side by side. Currently it is diplaying one after the other.
How we can achieve this#.
Button Style#Template based button
Button region#Left
But the difference is button tempalte
First Button#<input type="button" onclick="#LINK#" value="#LABEL#" class="t13Button" #BUTTON_ATTRIBUTES# />
Second Button#
<table class="t18Button" cellspacing="0" cellpadding="0" border="0" summary="">
<tr>
<td class="t18C"><input type="button" #BUTTON_ATTRIBUTES# value="#LABEL#"/></td>
</tr>
</table>
Thanks,
Anoo..
Edited by: Anoo on May 2, 2012 6:21 AM

What happens if you do this ?
<input type="button" onclick="#LINK#" value="#LABEL#" class="t13Button" #BUTTON_ATTRIBUTES# /><input type="button" #BUTTON_ATTRIBUTES# value="#LABEL#"/>Edited by: 910011 on May 3, 2012 8:43 AM
Edited by: 910011 on May 3, 2012 2:09 PM

Similar Messages

T61 On-screen button display problems

Hello, I've been having a problem with my T61 and was wondering if anyone on here could help me out. My laptop recently crashed, having the blue screen on startup, causing me to reinstall Windows Vista again and all. I managed to recover all my files and everything seems to be back to normal except for a few things. First thing that annoys me the most is that whenever I use my volume buttons on the keyboard, the volume up and down works but does not show up in green text, like before, saying what volume number it is at. In addition to this, my mute button only mutes volume but does not unmute the volume afterwards. Like the up and down volume buttons, the shortcut keys of Fn+Home and Fn+End to increase and decrease brightness of the screen do work, but do not display the on-screen green text. One other problem I have is that my ThinkVantage blue button next to the volume buttons does not work at all. Lastly, my larger battery icon does not show up anymore in the toolbar to the left of the clock and the small picture icons next to the clock. I hope that these problems can be solved through these forums and thank you very much for all your help!
Solved!
Go to Solution.

It would seem that you did a clean install of Vista instead of a system recovery. If that's what you did, you're missing a bunch of Lenovo specific utilities, including the OSD and Power Management applets.
Have you run Sytem Update yet? If you don't have the application, go to http://www-307.ibm.com/pc/support/site.wss/homeLenovo.do?country=us and let the page autodetect your system and then find the appropriate download for the Updater. Once the updater is installed, use it to gather the rest of the stuff you need. Good luck.
T520 4239-CTO
T61/p 6459-CTO (Gone but not forgotten)
A31/p XP Pro 1 gig memory
A30/p XP Pro 1 gig memory
TP600 Win 2K 288 mb memory
701C Win 98 Don't ask

Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

Date popup problem in APEX 3.1

Hi
I have a date picker (DD-MM-YYYY HH24:MI) and after upgrading to APEX 3.1 from APEX 3.0.1 the popup window height is too small.
The end user is having to resize the window to click on the OK button.
Is there a file I can edit to increase the height, couldnt find it in templates/themes.
Regards
Adam

Hi Adam,
This is a bug in APEX 3.1. It was discussed here:
Apex 3.1 Upgrade Issue - dba_lock and date picker display
and here:
Date Picker problem in Apex 3.1
I'll let Carl investigate and provide an official response and recommendation. Although I know where this problem is occurring.
The size of the popup calendar window is hard-wired in the file apex/images/javascript/apex_3_1.js. In APEX 3.0, the size of the popup window was determined programatically at runtime and was a function of the date format, if it included a time component or not.
The uncompressed, readable version of this same file is in apex/images/javascript/uncompressed/apex_3_1.js. Look for p_DatePicker and you'll see what I'm talking about. You'll see the height is hard-wired to 210 and width to 258. In APEX 3.0, the height was set to 255 if the date format contained a time component.
So my suggestion, until Carl provides an official response, is to look for '210' in apex/images/javascript/apex_3_1.js and change this to 255. Granted, all calendar popup windows will be this big, but it won't put as great a burden on the end-user.
I hope this helps.
Joel

Button Display Symptom

I have 3 regions on a page and the 2nd region has 4 buttons and an SQL query report which displays data from EMP.
There are two page item:
HIDE_SHOW -- which is Show to show the data and Hide to hide the data.
P1_SAL_LIMIT -- which limits the employees shown by salary: 0 (default), 1500 or 2000
The buttons are:
Show -- which, when pressed, shows the report (Not the entire region just the data lines of the report.)
              (The Show button displays when :HIDE_SHOW = 'Hide'. Note the data is hidden when this button displays.)
Hide -- which, when pressed, hides the report
              (The Hide button displays when :HIDE_SHOW = 'Show' and the data is being displayed.)
SAL > 1500 -- Which show only employees with sal > 1500
SAL > 2000 -- which show only employees with sal > 2000
The Query is
select ename,job,sal
    from emp
   where :HIDE_SHOW = 'Show' and SAL > :P1_SAL_LIMIT
What works:
Show, Hide and Sal > 1500 work fine together. Note: the Sal > 1500 button sets :HIDE_SHOW to 'Show' so one can see the data.
But I need to do a computation when a Sal button is pressed, so here is what I tried. The SAL > 2000 button is set up with Dynamic Actions (PL/SQL block and page refresh). Note: I need to do a branch to (the same) page or a refresh rather than a page submit because of activity which may be pending in the other regions on the page.
What I need /expected when Sal > 2000 is pressed: Tthe Hide button will display because :HIDE_SHOW is set to 'Show' and data is being displayed.
Problem when Sal > 2000 is pressed: Even though I set :HIDE_SHOW to 'Show' in the computation, pressing Sal > 2000 has no effect on the Show button.
It's a Session State problem, right? But I'm not sure how to solve it without a Submit.   I added a Set Value to the DAs but that did not solve the problem.
How do I get the "Show" button to react to the change in the value of :HIDE_SHOW?
You can see it set up here:
WS: APEX_EXAMPLES_01
demo / demo
Application 16604 (Button Control), p. 1
Thanks,
Howard

Yes, you're right, the Show buttons were not quite working, sorry, I was concentrating on the filters. I fixed the hide show for the first region. Region 2 is mostly there and you can replicate the functionality for that one. However, the Sal filter buttons for region 2 do work and you can see how it all works independently. Please concentrate on the techniques.
The basic steps for the filters are:
1. Set the filter limit
2. Set the Hide_Show variable
3. Hide the Show button
4. Show the Hide button
5. Refresh the report.
Notice the computations. They are needed to initialize the values.
I also changed things so they don't trigger off the change of value of an item. That just seems obscure to me when the user cannot directly change the item. It seems better to trigger off button clicks. That's what the "Report 1 SHOW button" and "Report 1 HIDE button" DA are for. If you look at them I think they are really easy to follow (Show button, Hide the other button, Set the Hide_Show filter, Refresh report)
When you break it down into individual steps and give meaningful names to your elements (items, regions, da, etc..) I think it all becomes a lot more maintainable.
I have definitely seen unmaintainable applications since I started with APEX way back on HTMLDB 1.6. That said, they are mostly easy to maintain when things are well thought out and steps are broken down into easy understandable actions.
Good luck!
Thanks
-Jorge

Button displayed among this region's items clears fields

I've created a Button displayed among this region's items clears fields that's in the middle of my form, set to Submit Before...
When click the button, it submits and the field items above the button clear off the form.
I don't need it to submit, I just need it to make three fields appear on the form if needed, hence the use of the button.
Thanks in advance!

Hi,
userRRRYB wrote:
The user is cataloging documents. On the form she enters document number, title, owner, and document type (Work Instruction, Verification Sheet, Pallet Layout, etc.) If the document type is a Product Label, there are three more fields that need to be populated. Because the Product Label is one of over ten types and it's the only type that requires these extra fields, I got the bright idea to create a button that, when clicked, displays the fields.
The problem is that the button is 'among the region's items' and submits when clicked (Request = Go) so it submits and clears the fields that have been populated prior to the fields in question.Assuming you are on Apex 4.0+ Instead of using buttons to display 3 extra fields when document type is product label use dynamic action to hide and show items, Here is how you create it
1) Create standard dynamic action
2) Selection type (item) -> item(s) -> :PXX_DOCUMENT_TYPE -> Value (20) Assuming you have created select list for document type field
3) Specify true action -> show -> item(s) (select the three items you want to display) -> create false action (checked)
By using DA your field values will not clear out.If you are on 3.0 you can do this with javaScript.
It would be easier to help you out if you provide APEX version or recreate your problem on apex.oracle.com
Regards,
-Senthil

My original post, locked by this forum. Display problem related

Hi G5 Gurus,
The display problem first, we all know when screen savers display, a click on the mouse will bring you back to the active desktop, this was how it worked., but now, sometimes a click cause the G5 to sleep!
As for the sleep, I dare not to put it to sleep these days, because I am afriad it may cause a fire by over heating. Sometmes, actually four times in the past few months, my G5 could wake up by itself, followed by a extrem high speed running of the cooling fan, it sounded like a hair dryer running in the same room. Sometimes the sreen could light up, just like real wake up, sometimes, it was black. No clicks the mouse or keyboeard could bring it back to normal, I had to press and hold the power button to turn it off.
This crazy problem happened for the first time last summer, a dead hard disk was the cost. Apple replaced it, but failed to detect the cooling or power or display problem. I was given one month extended free service, but right after its end, the problem was back and happened even more often.
Please let me know if any of you had the same problem and please advise what to do.
100s Gs of thanks.
Songyan
iMac G5 Mac OS X (10.4.8)
la teller
Posts: 1
From: Los Angeles
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 10, 2007 2:21 PM in response to: Bad luck G5
I have the EXACT same problem. In fact, I could not have described it better myself. What gives? I brought it in to the "genius" bar and they repolaced the power supply free of charge but the problem is still there. I noticed they ordered a new logic board but did not end up replacing it after all. Did you have yours replaced and did it work? Is this a known issue?
imac G5 17 inch Mac OS X (10.3.9)
Bad luck G5
Posts: 8
From: UK
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 11, 2007 1:20 PM in response to: la teller
Hi La teller,
Thank you for your reply. The 'genius' here in London only replace the dead hard disk, which I belive was a victim of this problem. I was told they couldn't find anything wrong with the power supply or the cooling system.
Now at lest I know I am not the only bad luck guy. Let's wait and see if others are having the same problem. I am not sure if this is a known issue to Apple, even if it is, it may take years before they can offer a recall or free repaire. I noticed that some G5s have already been suffering from power problems and a free repaire was offered.
Thank you again and hope Apple can take our concerns into their consideration soon.
Songyan
iMac G5 Mac OS X (10.4.8)
stopha6
Posts: 1
From: US
Registered: Jan 12, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 12, 2007 7:43 AM in response to: Bad luck G5
Hello,
I'm also having this problem (fan running, won't come out of sleep), just spoke with an apple care rep. He confirmed my suspition that it was software, not hardware as I have just had the logic board and power supply replaced.
His suggestions were to:
1. Run disk repair from the startup CD
try running OS X from a firewire drive and see if the same behavior happens or
perform and archive and install.
When the fan starts to run like that it means the OS is not communicating with the hardware properly. The OS could be somewhat corrupt if you were having hardware issues beforehand, hence the need for a reinstall. I will be performing an archive and install after the disk repair, I'll let you know if it fixes the problem!
iMac G5 Mac OS X (10.4.8)
Bad luck G5
Posts: 8
From: UK
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 14, 2007 12:52 PM in response to: stopha6
Hi Stopha6,
Thank you for your message. I never imagined it could be a software issue, cos it looked so hardware.
Please keep me updated with your progress.
By the way, as I said in my old posts, a hard disk went dead when this happened for the very first time, how do you read this?
Thank you.
Songyan
iMac G5 Mac OS X (10.4.8)
Bad luck G5
Posts: 8
From: UK
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 15, 2007 6:58 AM in response to: stopha6
Hi Stopha6,
After reading your reply again, I realized that the system had already been reinstalled. As I said when it happened for the first time, the hard disk died with it, which was replaced, of course with a new OS X, but the same problem is still happening. May this suggest that it is not just a software problem? Thank you. Songyan
iMac G5 Mac OS X (10.4.8)
AG-Nate
Posts: 5
From: Pismo Beach,CA
Registered: Aug 26, 2006
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 14, 2007 3:38 PM in response to: Bad luck G5
The Fans going at full is only because you have an application that is using a lot of cpu power and therefore causing the imac to heat up so it turns the fans on. The screen-saver and sleep problem you describe sounds like something that may just happen on accident. But this sounds mostly like a software problem. Try making sure to always quit all non-apple products and see if anything changes.
eMac, iMacG5 Mac OS X (10.4.7) 800mhz 1gig ram, 2ghz 2gigs of ram
Bad luck G5
Posts: 8
From: UK
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 15, 2007 6:50 AM in response to: AG-Nate
Thank you, Ag-Nate. I will try as you adivised but I con't think the fans were activeted my intensive CPU using. In most of the cases, the problems happened when the Mac was sleeping, when the minimum CPU were being used.
iMac G5 Mac OS X (10.4.8)
Timothy Klein
Posts: 15
From: Denver, CO, USA
Registered: Dec 6, 2004
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 31, 2007 1:02 PM in response to: AG-Nate
"The Fans going at full is only because you have an application that is using a lot of cpu power and therefore causing the imac to heat up so it turns the fans on."
That's only partly right. A hard-working process will make the fans run at high speed, of course.
But, the OS is in touch with the firmware of the iMac, telling it how to run the fans, based upon information the OS X kernel is getting about the state of the hardware.
If the firmware loses touch with the OS for some reason, and is not getting instructions on how to run the fan, it will default to running them at full blast, to be on the safe side (and this "full blast" fan mode is way louder than anything you'll generally experience during normal usage, I know from experience).
So it may not be so simple as a hard-working cpu process kicking the fans on.
iMac G5 17" 1.6 GHz Rev. A Mac OS X (10.4.8) 1 GB Ram
Kensall
Posts: 2
From: London, England
Registered: Feb 2, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Feb 2, 2007 9:05 AM in response to: Timothy Klein
Hi I have a 20" G5 imac it's about 18 months old and I am having the same problem, It freezes and the fan runs really loud. It's nothing to do with software as my I.T. guy has done a complete re-install. All of our admin people have imacs of differring ages and the flat panels are all OK but every one of the G5s has had a booting problem. Some fell into the recall for replacement logic boards but the one I have at home is the newest and doesn't. I'm waiting for my apple reseller to get back to me, but it looks like it's the logic board and as none of the serial numbers fall into the recall, I'm expecting a big bill. I'm really disappointed as I've been a professional apple user for over 15 years and have grown to expect a certain amount of honesty and integrity from them. Looking at all of the discussion boards and the amount of people complaining of the same problem the logic boards are defective and apple should be replacing these free of charge.
i mac G5 Mac OS X (10.4.8)
a brody
Posts: 15,170
From: Silver Spring, Maryland. Don't forget to backup your data!
Registered: Dec 23, 2000
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Feb 2, 2007 10:27 AM in response to: Kensall
Kensall,
Welcome to Apple Discussions!
As in the other thread I wrote:
Being from England, you may find the repair program under these pages:
http://www.apple.com/uk/support/imac/repairextensionprogram/
http://www.apple.com/uk/support/imac/powersupply/repairextension/
Check both of them as they refer to different models.
If neither of yours is under the program, please start a new topic thread so someone can help you.
http://discussions.apple.com/forum.jspa?forumID=881
First off, you'll get a wider audience who may be able to solve your problem. Secondly, responses to you won't confuse the original poster with solutions that don't apply to them. And thirdly, you'll know for certain whether or not a response applies to you.
iMac C2D 2.17/20 inch/iMac G5 1.8 1st gen/iMac G4 800 Mac OS 9 Mac OS X (10.4.8) EyeTV 200, Canon PS A530 , Epson P-R220, iSight, Airport Extreme, 5th Gen iPod

I am having a very similar problem. My G5 imac has already had the logic board replaced from the leaking capacitor problem. 8 mos. later the power supply was replaced under the second recall program when it failed to start up.
It had been working now for almost a year, when about 3 mos. ago I started to experience the sudden dimming effect - if the display was untouched the screen would dim about 30% similar to a laptop in energy save mode. I checked and none of these types of options were set in the pref panes. At the same time I would have the iMac go to sleep after a while from non-use, and then when I tried to wake it it would stir for a few seconds and then go right back to sleep. It took 2-3 attempts to wake it up.
Then last week, as I tried to wake it, it just shut down instead completely. I had to hold the power button down to recycle it to get it to come back to life (3 times).
Today was it - I found what I thought was a sleeping iMac, but it will not power up at all. I opened the back cover and the power supply is working, but I cannot get the board to energize, I reset the PMU, but the #2 LED won't even blink. It is completely dead.
Basically every time I used this computer I held my breath that it would not work. After 2 recalls I still only get 9 mos. out of it? Apple is really starting to show it is like the "big" computer makers, the quality is going right down the tubes.
iMac G5 Mac OS X (10.4.4)

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It does not allow you to change a password. How would you do that?

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It only allows you to view and delete site passwords. It does not allow you to change a password. How would you do that?

If you enter a new password Firefox should offer to change the password.
*You may not need to delete the old password. Try "Refreshing" the page, entering the site again, you may need to let Firefox fill in the old password, then enter the new password, and Firefox should ask to save the new password. See:
**http://kb.mozillazine.org/Deleting_autocomplete_entries
*If you delete the old password, you may need to "Refresh" the site after deleting the old password.
If you want to delete the password that has been saved do the following:
#In the Tools menu select Options to open the options window
#Go to the Security panel
#Click the "Saved Passwords" button to open the passwords manager
#Select the site in the list, then click Remove
<br />
<br />
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe PDF Plug-In For Firefox and Netscape 8.3.0 (''Note: this is a very old version and installing the current version may not delete it or overwrite it. To avoid possible problems with having 2 versions installed on your system, you may want to remove the old version in Windows Control Panel > Add or Remove Programs before installing the new version'').
*Shockwave Flash 10.3 r181 (''this may be current but a new version was released on 2011-06-14 with a ".26" after the "181". You can use the Plugin Check below and/or look in Add-ons > Plugins for the version of Shockwave Flash that you have installed. The newest version will be shown in Add-ons > Plugins as "Shockwave Flash 10.3.181.26"'').
*Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''<u>if you have it already installed</u>'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do <u>NOT</u> have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''<u>Also see Download link</u>''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to <u>un-check the Yahoo Toolbar</u> option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Ideacentre B320 display problem

I'm suffering from a display problem, and cannot figure if it's a software or hardware issue... I'm on Win7 64bit. Here are the symptoms:
1) For a while now, intermittently the screen would go grey (or some sort of a messed up pattern of rgb pixels) and I would have to power down forcefully. The frequency of this has gone up very much in the recent weeks
2) When the machine freezes, I can still hear the music playing, and Windows continues to do whatever it was doing before
3) Recently (I'm guessing after a Windows update), I wasn't able to boot into normal mode anymore. It would show the Windows splash screen, then before the login screen appears it would just go black and freeze. Leaving it for a long time doesn't lead to recovery
4) To try and fix this, I've updated the ATI driver to the latest version, which didn't work so progressively tried every version between the11.6 and 10.3 (4?) which was the default when the machine was purchased. No luck there. I've also flashed the bios and that didn't help either
5) I can boot into safe mode, so I disabled amdkmdap using sysinternal's autoruns.exe, which meant that I can boot into normal mode, but it woud fall back onto Windows' vga driver (1400x1050 only!)
6) Now, even in the low res mode, almost daily the grey screen freezing would happen and I would have to reboot. Tapping the power button allows the shutdown dialog to come up (I'm guessing), and pressing enter would shut down the machine then.
There's an awful lot of posts on the internet regarding people having issues with ATI HD6450 and similar category cards, some of which sound similar to my case. They too experienced the freezing problem and reverting or upgrading the drivers had no effect (many even reinstalled windows completely). It sounds like though, the problem is software in origin at a guess.
On the other hand, the machine is now 3-4 years old and I could imagine that the GPU or graphics memory might have suffered wear and tear -- emailing Lenovo support took a week to get a response, the only thing they asked was whether my warranty is still active (after that it's been a complete silence) are they usually this terrible?
The last thing is, when the problem first occurred I booted using a linux live CD and it was all fine, at full resolution graphics. I haven't repeated this experiment since it takes quite a while to boot from a CD... but suggested that the hardware is intact. In fact, by messing about with the drivers I was able to boot into Windows normal mode and operate for 1-2 days, after which the grey freeze happened again. I haven't been able to get back into that since.
Here is my question: Is there a way to find out whether it's software or hardware that's at fault? If it turns out to be hardware, what are my options at replacements? The GPU is soldered onto the motherboard, so do I have to replace the whole thing? If it's a software issue, would restoring to factory default state fix this issue, given that an unknown update could cause the same issue at any time... This is the last time I will buy an AIO without removable everything.

Welcome to the Lenovo Community !
Probably a good test of the hardware is use the Linux Live CD that you used earlier. If the graphics are still good when using the Live CD then your monitor and GPU are fine.
If the hardware checks out Ok then I suspect you have a driver problem. Try using a driver cleaner to fully uninstall the ATI driver since bit and pieces left over from previous driver installs can cause problems. The link below is for a free and highly recommended utility for cleaning the system of the graphic drivers. After the clean up I would try installing the original driver that came with your system.
http://www.guru3d.com/content-page/guru3d-driver-sweeper.html
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Display problem, and maybe worse

On startup this morning my iMac (PowerPC) G5 display began behaving very strangely. The screen is displaying my usual desktop picture, dock and icons, and finder window. Applications are running, but very oddly.
The screen is covered in small visible dots, some flashing, some static. When I open a document, or a page in Safari, it displays more or less normally (I can use Word, for example), by then "smears" if I start to scroll down the page. At other times the graphics break up completely.
I'm guessing this is a display problem, but one other odd symptom is that sometimes if I click on a file in the Finder window, instead of opening the document the window shuts down and re-opens in its starting configuration.
I tried a restart, but it stuck on a black screen, and I had to force it to stop via holding the start button, and start again from there. I tried accessing system profiler, and it all froze up, requiring another button stop / start.
It looks like a hardware issue, but I've no idea what kind. Anybody recognise what is happening? (I'm posting this from my iBook).
Kenny

Since the update 10.9.4:
My soundcard is missing and on Safari 7.0.5 video artefacts and flickering.
On macbook Pro 13 Early 2011

Display problem - report /w break formatting

Hi everyone,
I'm having a display problem in a standard report with break formatting on first column and repeat headings on break. Whenever I start a new page and a new group of data starts, the heading for the break is displayed 2 times. If the new page doesn't start with a new group, there's no problem.
I've made an exemple there : http://apex.oracle.com/pls/apex/f?p=25160:9
You can see the group #1 on the first page, no problem there.
On the second page, the group #2 begins and the header is repeated.
On the last page, the header for group #3 is not repeated because it was started on the previous page.
Why is the header for group #2 repeated ? How can I correct this ?
Thanks,
Patrick

Hi all,
I think it is a BUG, that was not fixed in 4.2.
Is it possible to workaround it????
Probably dynamic action with something like this javascript $("#my_table_id").find("tbody tr:(:eq(0))").remove(); With "On-Change" Event on the Region?
But this javascript should be execute only on the pages greather than 1. How can I check in javascript which page of report is actually shown???
Ideas, please!

Display problem - horizontal stripes appear sometimes

I've got display problem. Horizontal stripes appear sometimes (randomly?) on movies or just desktop and stop when I change screen resolution to other and switch back to 1080p. It only happens with my iiyama xb2472hd via hdmi. Everything is fine using Windows. I've tried other monitor via hdmi and the problem doesn't occur.
Any ideas how to find source of problem?
Here is video:
http://youtu.be/dV2d44njQXg
My hardware:
Iiyama XB2472HD + Lenovo y580 which is using Intel HD Graphics 4000 as display device

After months of having this problem I realized that it occurs only with that monitor (Iiyama XB2472HD but probably others too) when I turn it off and than on (after some time) while Arch is still running...
Common situation: I lock the screen in KDE than turn off the display using capacitive button on the device. When I come back after few hours and turn it on the stripes appear. Switching to other screen resolution for a while makes it fix.
Could it be some synchronization problem or something like that?
Have someone any idea how to debug it ?
I believe that someone (kernel developers or Iiyama) made some bad assumptions while implementing HDMI standard...
Last edited by rstadmin (2013-09-04 21:24:41)

Standard button image problem

Hi,
I've got a problem when I try to set Image to the button from standard components.. I can set it up, but than I didn't see the image in the browser.
With the button from basic components there is everything working fine, unfortunately I need that component from standard.. any advice?
thx.

Hi,
I've got a problem when I try to set Image to the button from standard
components.. I can set it up, but than I didn't see the image in the browser.
With the button from basic components there is everything working fine,
unfortunately I need that component from standard.. any advice?
thx.Standard button has problems with images due to a JSF issue. To work around the issue, remove leading / from the buttons image property and re-deploy. This should cause the standard button image to display correctly.
Hope it helps,
Lark

PHP MySQL data display problem

I am having trouble getting data to display on my web page.In Dreamweaver CS3, I created a new page.
Selected PHP as the type.
Saved it.
Connected a database and created a recordset (all using Dreamweavers menus. I did not write any code).
NOTE: The database is on a remote server.
The TEST button displayed the records from the recordset with no problem.
On the new page, I then typed some text.
Then dragged some fields from the Bindings tab to the page.
I saved it and then went to preview it in my browser.
The page comes up completely blank. Not even the text shows.
I then saved the page as an HTML page.
When I preview this in my browser, the text shows, but the fields and data do not.
I then tried creating a dynamic table (again, using the Dreamweaver menus.).
A similar thing happens, ie. If I save it as an HTML, the text shows and the column labels and border shows, but no data.
Nothing shows if I save it as a PHP file.
I can view the data online using files created by PHPMagic, so I know the data is there and retrievable.
It is just in pages created in Dreamweaver that don’t work.
What am I doing wrong?

My web server supports PHP. I can disply PHP pages created by other software packages, just not the Dreamweaver ones.
Frank
Date: Thu, 4 Jun 2009 19:04:03 -0600
From: [email protected]
To: [email protected]
Subject: PHP MySQL data display problem
To view php pages - or pages with PHP code in them - in a browser, the page must be served up by a Web server that supports PHP. You can set up a testing server on your local machine for this purpose. Look for WAMP (Windows), MAMP (Mac), or XXAMP for some easily installed packages.
Mark A. Boyd
Keep-On-Learnin'
This message was processed and edited by Jive.
It shall not be considered an accurate representation of my words.
It might not even have been intended as a reply to your message.
>

Flex 4.5, destructionPolicy="never" and display problem

Hello,
in my firstView I have destructionPolicy="never", when in my secondView I click on the back hardware button, return in the firstView, if the orientation phone change, I have a display problem : the background appear and the spark component scroller doesn't work on my android phone.
Thanks.

Known bug. https://bugs.adobe.com/jira/browse/SDK-30126

Button display problem in APEX!!

Similar Messages

Maybe you are looking for