Standard button image problem

Hi,
I've got a problem when I try to set Image to the button from standard
components.. I can set it up, but than I didn't see the image in the browser.
With the button from basic components there is everything working fine,
unfortunately I need that component from standard.. any advice?
thx.Standard button has problems with images due to a JSF issue. To work around the issue, remove leading / from the buttons image property and re-deploy. This should cause the standard button image to display correctly.
Hope it helps,
Lark

Similar Messages

Providing image for Standard Buttons on Application Forms

I've seen some postings on changing the standard buttons used in forms. Does anyone know if this has changed at all in Release 2? I want to put my own image for a button instead of the standard gray button and before doing the workarounds recommended, I want to know if this has been addressed in the new release.
Thanks.

I am afraid, the new release does not include changes where you can replace buttons with images.

Appraisal template standard buttons not working via ESS/MSS

Hi experts,
The error which I am facing in appraisal template is as follows
When I click on any button on appraisal template no action takes place.
Kindly let me know how can I resolve this error.
we are using BSP application HAP_DOCUMENT.
according to me page fragment 'document_buttons.htm' (Method CONVERT_BUTTON_TO_UI) contains the code for button creation and button handling
the page fragment 'document_buttons.htm' is getting triggered when page is initialized but it is not triggering when button is clicked.
Additional info that might be useful to resolve the issue:
1) While viewing appraisal template's web layout in t-code PHAP_CATALOG_PA.
I am facing following script error.
This error reappears when I click on any standard button For eg SAVE
2) We are currently using IE 8
3) We recently upgraded ECC system from ECC 6.0 to ECC 6.0 / EHP 6 (ECC 6.6)
4) I checked SICF and corresponding services are active
Thanks in advance

Hi Adrian,
Design2008 service is inactive in my system.when activated temporarily I was not able to see previous page (Blank page was displayed) in my appraisal application.
For BSP application HAP_document, i checked SICF->default host->SAP->BC->BSP->SAP->HAP_document.This service is active.
The image which I have attached with my question is appraisal template's web layout in t-code PHAP_CATALOG_PA.
regards
Ninad

Widget/Button image

Hello,
I have a problem with Button Widget. I decided to insert a rollover slidelet and on this slidelet I would like to have a button. The only way to insert button is to insert Widget and than select a button. I did it and now I would like to change the layout/view/image whatever u name it. Instead of it I have sth like this:
I don't fully understand what does published folder mean.
I hope u understad all

Hello,
If you do not like the images already provided with the Button widget, you can choose your image. But when publishing the CP-file to SWF (with its companion files HTML and JS) you will have to add the button image file to the same folder and upload all files in the folder to the LMS. The path to this button is a relative path.
Lilybiri

Passwords and images problem

Firefox image problem. In Firefox 3.6.12, every time I save an image that's already displayed on my screen, I see "one active download" appear in the bottom right of Firefox's window and the same image is also listed in downloads. The problem is that Firefox doing that uses more bandwidth. How do I set Firefox so that when I save an image, instead of that image getting re-downloaded from where it's stored on the internet, it's copied from wherever Firefox has it stored to display it so Firefox doesn't use as much bandwidth? Tools/options/advanced/network/offline storage is set to 50mb.
Firefox password problem. Tools/options/security/passwords has "remember passwords for sites" checked and there is nothing in my exceptions list. But Firefox keeps forgetting passwords, usually after restarting Firefox and or my whole system and on some sites, I don't even get asked "do you want to remember..." How do I fix this?
I do have CCleaner and it's set to run at startup, but all the boxes for Firefox are unchecked, so it's not the cause of either problem.

@cor-el
OK, I'll give that extension a try and see what happens, thanx! :-)
@venemovil
I right click and either select "save image as" or if I want to save an image to more than one location, I select "view image" and then use ctrl+s. Both results in Firefox re-downloading the image as I described above. It happens on every site I visit.
The password problem never happened before, but I will try disabling my extensions one at a time and see if it happens only whan a particular extension is turned on.
This is a screenshot of the extensions I do have installed.
http://i273.photobucket.com/albums/jj216/Moonbarker/Clipboard01.jpg
I've also noticed that Firefox is forgetting what sites I've visited recently (I type in part of the url of sites I've visited sometimes as recently as a few hours ago and the entire url isn't in the suggested list) and I keep having to put the Fire FTP Button back in the toolbar (next to the home/stop/reload/back-forward buttons). That may be related to the pasword problem. I don't know.

Displaying Iconic Button images

Hi,
I have installed 9i Apps Server with Forms6i and have deployed an already existing application on it. The Iconic buttons are not displaying any images. Is there a patch that I need to install ? if yes, which one? Otherwise, whatelse needs to be done in order to deal with this problem ? Thanks for anyone's help in advance.

I have all the gif in the directory and the physical directory's path is defined in Registry.dat file. Still no result and I cannot get the iconic button images. Appreciate your feedback but any other suggestions.

Keywords for standard buttons

Hello Experts,
In Table Maintenance Generator, I want to add event 'Before delete data' . When user wants to delete data using Table Maintenance Generator, it should pop up for confirmation. If user clicks on 'yes' button then it should delete the record and if user clicks on 'No' button it should come back to TMG without deleting record.
How to give events for standard delete button ? Is their any keyword which represents standard delete button? If their is keywords for all standard buttons then it is appreciable if someone share link from where I can get keywords for all standard buttons.
Thank you in advance

I am afraid, the new release does not include changes where you can replace buttons with images.

Standard buttons in ALV

Hi all,
I need to change the text to the standard button "Export" in ALV for the text "Excel" and assing only one function to this button, the function I need is export to excel.
Does anyone knows how to solve this problem please?
Help is really appreciated.
Regards!

In your first post you asked about ALV and now about non-ALV...
So about ALV you have the Excel download by default and you are able to change the text.
About non-ALV download I think you have to use the method: cl_wd_runtime_services=>attach_file_to_response.
Look at the last post in:
File download WD4A
Sergio

Audio on button rollover problem

Very very weird problem as I have six buttons in an Edge project all have the correct audiomp3 and ogg files dragged to the stage.
4 of the files play perfectly on mouseover but two do not.
I already did the obvious:
re did the files
re imported under a different name
pulled the problematic audio and inserted that with different buttons in ANOTHER test file and STILl either the audio plays once and thats it or it plays once and then plays backwards on another mouseover.
If I have to I can upload a file as this kinda stuff really irks me.
Can I upload the file?
R

FIXED IT!! Both the button image and rollover image were
saved as Buttons. Converting the rollover image to a Graphic solved
the problem. Now when I click my Pig, he turns into a juicy ham.
(Get it?) :)

IPhone button images

Does anyone know how I might get my hands on the .png files that contain the standard iPhone application button images? (Not the application icons, but the buttons that appear on toolbars and navigation bars within applications.)
Examples:
- the image of an eye that appears on a button on the toolbar in the google maps application
- the image of a pencil in a square that appears on buttons in the mail application and the text-message application
- the triangular up,down,left,right arrows that appear in the mail app and the safari app
- the '+' button that appears in a bunch of apps
I was able to find the '+' button image because its .png file was included with one of the sample apps apple distributed (the SQLite app). But I'm stuck on the others. In particular, I'd like to find the image of a pencil in a box and the image of an eye. I could draw my own but they wouldn't turn out as good, and since apple is so big on consistency I would have thought they might make them available somewhere.
Thanks,
Eliza

There are a couple of those type of images made available through the SDK. Check the UIImage documentation. Toward the bottom of the page is a section called "System Images" which contains these:
UIKIT_EXTERN NSString * const UIImageNameMessageCompose;
UIKIT_EXTERN NSString * const UIImageNameRefresh;
UIKIT_EXTERN NSString * const UIImageNameMagnifyingGlass;
UIKIT_EXTERN NSString * const UIImageNameLightInfo;
I'm not sure if any of those are what you are looking for, but its worth checking out at least. I'm a little surprised that there aren't more images in the list, but perhaps more will be added before the official SDK release in June?

I am trying to use photomerge compose. I open one standard jpeg image and one image that is my business logo in a png format. When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from

I am trying to use photomerge compose. I open one standard jpeg image and one image that is my business logo in a png format. When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from it. It has worked in the past but I downloaded the update today and photomerge will not work correctly. Any ideas?

hedger,
How do you expect anyone to help when we don't know a darned thing about the file, abut your setup, exact version of Photoshop and your OS, machine specs, etc.?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

How to remove the the standard button APPEND/INSERT/DELETE in webdynpro alv

Hello,
how to remove the the standard button APPEND/INSERT/DELETE in webdynpro-abap alv
Thanks
Rakshar

Use this.
    data lo_cmp_usage type ref to if_wd_component_usage.
    lo_cmp_usage =   wd_this->wd_cpuse_alv1( ).
    if lo_cmp_usage->has_active_component( ) is initial.
      lo_cmp_usage->create_component( ).
    endif.
    data lo_interfacecontroller type ref to iwci_salv_wd_table .
    lo_interfacecontroller =   wd_this->wd_cpifc_alv1( ).
    data lo_value type ref to cl_salv_wd_config_table.
    lo_value = lo_interfacecontroller->get_model(
    data: lr_std type ref to if_salv_wd_std_functions.
    lr_std ?= lo_value.
    lr_std->set_export_allowed( abap_false ).
NOte: ALV1 is alv component name
Regards
Srinivas
Edited by: sanasrinivas on Dec 1, 2011 6:11 AM

IOS 6.1.3 WIFI button disable problem on iPhone4S - It is definitely a BUG

Hi Apple Fans
I have a full house of Apple products from iPhone -> iPAD -> iPod -> Mac -> AirPort, and I am suffering from WIFI button disable problem after upgrade to iOS 6.1.3, without any clue after calling Apple Support, factory reset and reload iPhone for more than 10 times. I also try all tips on Apple Support Communicties except put it into a freezer, still no any luck. Apple Support suggests that my iPhone may be factly!
Tonight, I can get my WIFI back in below sequence:
1. Switch to English language from Chinese
2. Turn Cellular Data Option to off
3. Reset Network Setting
After the phone reset, the WIFI row show 'Not Connected', and I can select my home WIFI (Airport Express) without trouble. To prove my finding is workable to all case, can you try the same and update here if it works for you?
Good Luck!
PS: I always believe it is a BUG.

Hi,
I sympathise with you as my iPhone 4s is 7 months old and is also greyed out. I tried everthing except the potentially stupid one of putting the iphone in a freezer! I took the phone back to the vendor who sent it away and repaired it. But alas after a month it is greyed out again. I have again returned to the vendor and he will repair it again. I asked him how and he told me it is a software conflict and he has to spend around 9 hours downloading a patch repair. Apple are aware of this issue and I feel completely let down because they have not posted a fix on the net. Presently I am living and working in Dubai, back in the UK I am sure my iPhone would have been exchanged for a new one. I need my iPhone for my work and cannot afford to just buy a new one so I have been let down and despite for years being a supporter of Apple and their products I shall think twice before investing in any more Apple products.

How to use mp3 files on a form standard button, instead of wav-files. Need to save space.

I would like to use mp3 files instead of Wav-files on the standard button, in the forms edit menu. I know it is possible in the interactive menu to add buttons with mp3 sound. But those buttons has not the same options and appearance as the forms buttons. We create learning books with lots of sound files in each PDF, so with wav-files the PDF gets quite heavy in Gb.

Smokerz – Thanks for the feedback. I managed to get iTunes to find the movie files on my TC by simply dragging the icons of the files on the TC into the Movies folder in iTunes. This immediately made them available for streaming on my Apple TV. Also, I learned with great relief that, despite their large size, dragging icons of my movie files into iTunes did not copy them to the C: drive on my desktop computer. Thus, it looks as if the job is pretty much done. Thanks again for your advice.

Image problem in V4.0

Hi,
Previously I had lots of problems with showing a BLOB image from a table
in a report using the apex_util.get_blob_file_src function.
Varad put me right on several ocassions: see the thread at
Confusion with get_blob_file_src
Eventually everything went well, and I got my images of a specific size on the screen.
In the last month or two, the host database that I rent went up from version ten to version
eleven, and the apex version changed too from 3.2.1 to some version of 4.
I've only now discovered that the images don't display any more. I've re-read the thread
mentioned above but can see no deviation from Varad's sterling advice. It still doesn't work,
so my current guess is that something has changed when Apex went to its new version.
Can anyone point me in the right direction regarding Image problems in version 4 ?
I guess I'm not the first to experience such issues, and a checklist of things to try would
be most welcome.
I've done a View->Source on the page that doesn't work, and the issue with a missing value
for the "d=" parameter on the apex_util.get_blob_file seems to have recurred:
src="apex_util.get_blob_file?a=130&s=1718106956127950&p=13&d=&i=25615931827270369&p_pk1=5&p_pk2=&p_ck=947078FC54BB5126E7E0D19F8A24C416"
Suggestions welcomed please; thankyou in advance.
Mungo

Hi Folks,
I've found a solution to my "image" problem that caused this thread, hence the decent thing is to
post it here.
I read various other threads and stumbled across:
PDF viewing with apex_util.get_blob_file_src not working with 4.0
PDF viewing with apex_util.get_blob_file_src not working with 4.0 &# 4404695
That thread mentioned the requirement for an "Automated Row FETCH" process as well as having
an "Automated Row PROCESSING" process too.
I had the latter, but didn't have the former, so throwing caution to the wind I tried adding a dummy
Automated Row Fetch process and the damn thing worked!
Haven't got a clue why on earth either of these are requirements on a page that is selecting data
from the database - I don't understand where such processes are called in the big scheme of things.
That's just me baiting some kind soul to spell out the fundamentals for this idiot... please?
Happy to be corrected on any points.
Regards until the next crisis...
Mungo :-)
P.S. How come there is no reasonable way to get the URL of a single post in a thread - I'd like to give
reference to the single post that helped me, but all I seem to be able to get is the whole blooming thread.
Suggestions?
Edited by: MungoHenning on Sep 15, 2010 1:39 PM

Standard button image problem

Similar Messages

Maybe you are looking for