Button Navigation adding action
Hello,
I am not a web designer by trade but love to teach myself so
go easy on me... I have Flash 8 and I have a full working movie for
my website I generated. I also made a buttton that will start the
movie. But I cant seem to add the action on keypress to trigger it.
Would someone mind giving me a pointer or leading me to an
instruction page on the subject? I havent had any luck. I am
looking for on the press of the button to start the movie till the
end then reload and stop at the initial state....
Thanks
If you're looking to capture a keyboard keypress, check here:
http://livedocs.macromedia.com/flash/8/main/00001550.html
If you're looking for clicks on your button in Flash, check
here:
http://livedocs.macromedia.com/flash/8/main/00003996.html
Good luck!
Similar Messages
-
Adding actions to buttons...
I created a slide show in flash (I'm very new to Flash). The
slideshow
works great so far. I recently added some buttons to the
slideshow (each in
their own respective layers) and the buttons are Prev, Play,
Stop, Next. I
want to add actions to each of those buttons with the action
script. I want
the Stop button to simply stop the movie whenever you press
the button, the
play button I want to simply play the slideshow if one has
pressed the stop
button (by default my slideshow starts when it loads). The
next and play
buttons are obvious what they will do. I'm wondering how I go
about adding
these actions to each button. I know how to add them to the
buttons but I
just don't know the proper Action Script code. Can anyone
help me out with
this. Can't seem to find a good tutorial on it!
Best Regards,
Chris Jumonville
iMedia Web Design
503.277.3553Nevermind, did it myself.
Best Regards,
Chris Jumonville
iMedia Web Design
503.277.3553
"Chris Jumonville" <[email protected]> wrote in
message
news:ejj8vq$jff$[email protected]..
>I created a slide show in flash (I'm very new to Flash).
The slideshow
>works great so far. I recently added some buttons to the
slideshow (each
>in their own respective layers) and the buttons are Prev,
Play, Stop, Next.
>I want to add actions to each of those buttons with the
action script. I
>want the Stop button to simply stop the movie whenever
you press the
>button, the play button I want to simply play the
slideshow if one has
>pressed the stop button (by default my slideshow starts
when it loads).
>The next and play buttons are obvious what they will do.
I'm wondering how
>I go about adding these actions to each button. I know
how to add them to
>the buttons but I just don't know the proper Action
Script code. Can anyone
>help me out with this. Can't seem to find a good tutorial
on it!
>
> --
> Best Regards,
>
> Chris Jumonville
> iMedia Web Design
> 503.277.3553
> -
Having trouble adding action script to button symbol
Hello everyone:
I am hoping someone will read this as I am a developer in
'dires straits' with Flash ( a newbie). My problem regards a
layer called "button" which has already been converted to symbol
and turned into an invisible button. The problem lies when I try to
use the selection tool to select it so that I can add action script
to it. Instead of the actions dialogue box saying "actions-button",
it says "actions-frame", and as a result, the action script doesn't
work. I don't know what to do, it should be simple to select it but
something is wrong. If you feel a need to help a developer in need,
you can email me at [email protected], and I can e-mail
you the file so that you can help. Thanks, or you can call me at
310-867-5167
CorinnaCan you plant the fla file on a server and provide a link to
it? Zip it up first if possible. -
Security button to initiate actions to clear history, delete cookies etc was always at the top of the firefox window, but had disappeared when I opened firefix today. It was very convenient and useful, so would like to know what's happened to it?
It was just a plain looking button marked security; don't know if it was added by an extension as it was always there. Clearing the recent history is just one action the security button performed, along with deleting cookies and a number of other security related deletions. So, just being able to clear recent history is only a small part of what the security button would do for me, with just 2 clicks, so much faster and easier.
-
Run button's method action without input text's validation raise
Hi
My English isn't very good
I use jdeveloper 11.1.1.3.0
I have a button and an inputText(with validation) on the page. I defined a method action for the button.
when I click the button, the input Text's validation raise and the button's method doesn't run.
If I set immediate=true for the button then the validation doesn't raise but in this case also button's method doesn't run.
How can I run button's method action without input text's validation raise?
HabibIf I set immediate=true for the button then the validation doesn't raise but in this case also button's method doesn't run.This should have worked . Run your application in debug mdoe and put a debug pointer in your actionListener to see if the control goes there.
Also put partialSubmit="true" for your button. -
Livecycle button with an action bypassed if 'enable additional featues' actioned
I have created a form in Livecycle that has a button with an action that when clicked repeats several rows of a table. (ie if someone needs to see more rows they click the button)
This works fine in the Preview PDF and works fine once saved if I then open the file in Acrobat. But if I 'enable additional features' when I re open the file the extra rows appear immediately prior to pressing the button. Can't someone explain how I stop that happeningPut your form:ready event script into the initialize event.
Kyle -
MovieClips actions not showing in the navigator of Actions panel
I'm using Mac and Flash CC
MovieClips actions not showing in the navigator of Actions panel
Steps i tried..
1) new Symbol
2) open actions panel
3) input stop() in the actions
4) symbol definitions not showing in the the actions navigator..
i can add scripts for stage and can be selected from the actions panel..
see screenshot..
anyone has idea what matter with this issue? many thanks.!!!I can only speak for myself, but your explanation of what you did and whatever problem you are having is not clear to me. The image doesn't appear to show anything as an issue. What are you trying to do and what do you expect to see?
-
The button for adding a reminder seems to have disappeared. Is this a bug or am I missing something?
It should be on the top of any list you create. It is the Plus Sign in the upper right hand corner of the "Paper".
-
Buttons with page actions not working
Hi,
I have a folio with buttons that have actions such as "Go to Page", "Go to First Page" and "Go to Last Page".
I could export this folio with Folio Builder to the server and I could view it in my tablet with no problems.
However, today (August 30th) I exported the folio again and it's not working. All other overlays are working fine, but buttons with page actions just show their Click appearance and go back to normal.
My friend also teels me of this problem.
What happened?
My Content Viewer in my iPad is updated and I have made the last Folio Builder upgrade.
Sincerely,
JeanThere was a bug in which these previously supported button actions (Go to Page and Go to First/Last Page) no longer worked, but I thought that bug had been fixed. Let me check on that. In the meantime, the workaround is to use the "navto://" format to jump to a different page within the same document. Use the "navto://articlename#n" format. The first page is 0, so #1 jumps to page 2. For details, go here:
http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60-8ad81e812b10bfd837-80 00.html#WS67cb9e293e2f1f606f59889512d69320e0d-8000 -
Creating button with gotoPage(action) and tooltip in Indesign CS4
Hi,
I want to create the button with gotopage(action) and tool tip for specific text for pdf generation, using the javascript/AppleScript .If any of you know ,Please do reply for my question.Dave is correct. Go to Page isn't available in PDF.
Instead, use the Hyperlink panel and select an object or text and choose Create New Destination and give it a name.
Then set the action for the button to be Go to Destination. Select the destination you saved. -
New ARB Issue: Button navigation and Declarative States
<[email protected]il.forums.adobe.com>
Message-ID: <C6277898.7F37%[email protected]>
Thread-Topic: New ARB Issue: Button navigation and Declarative States
Thread-Index: AcnOqlv/oTWkTNjMukqDP18VFO76uA==
Mime-version: 1.0
Content-type: multipart/alternative;
boundary="B_3324475544_8859892"
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
--B_3324475544_8859892
Content-type: text/plain;
charset="US-ASCII"
Content-transfer-encoding: 7bit
A new ARB issue has been posted to the flex open source site:
http://opensource.adobe.com/wiki/display/flexsdk/buttonnavigationand+decla
rative+states
This issue concerns the new state syntax and what it means to leave a value
of a property implicit in one or more states.
Comments, suggestions, and feedback are welcome.
--B_3324475544_8859892
Content-type: text/html;
charset="US-ASCII"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>New ARB Issue: Button navigation and Declarative States</TITLE=
>
</HEAD>
<BODY>
<FONT FACE=3D"Calibri, Verdana, Helvetica, Arial"><SPAN STYLE=3D'font-size:11pt=
'><BR>
<BR>
<BR>
A new ARB issue has been posted to the flex open source site:<BR>
<BR>
<a href=3D"http://opensource.adobe.com/wiki/display/flexsdk/button+navigation=
anddeclarative+states">http://opensource.adobe.com/wiki/display/flexsdk/bu=
ttonnavigationanddeclarativestates
This issue concerns the new state syntax and what it means to leave a value= of a property implicit in one or more states.
Comments, suggestions, and feedback are welcome.
B_3324475544_8859892Ned Murphy wrote:
Select the textfield that is inside the movieclip and in the properties panel you should see a dropdown for selecting the type of textfield. If you select Dynamic and then assign an instance name to the textfield you can use that instance name in your code to assign the text when the file runs. If you were to name the textfield "tField", then the code you would use inside an instance of your movieclip named "mClip1" would be...
mClip1.tField.text = "your text";
So, if I have multiple buttons, using your example, would the code read
mClip1.tField.text = "your text";
mClip1.tField2.text = "your text2";
mClip1.tField3.text = "your text3";
mClip1.tField4.text = "your text4";
And my buttons are built inside movieclips, ie
Main Timeline > aboutButton_mc > aboutText_mc > "about"
> contactsButton_mc > contactsText_mc > "contacts"
can the code be put at any level, or does it need to reside on the Main Timeline to access all the movie clips' text fields?
Just in case this may be too complex to get into via this forum, if you know of any good tutorials, that would be awesome too!
I tried doing a search, but it's so hard to tell if they might be in AS2, or AS3, and if they would apply to newer versions of Adobe Flash (I have CS5) -
ARB Issue Committed: Button navigation and Declarative States
<[email protected]il.forums.adobe.com>
Message-ID: <C62B9EEA.82F3%[email protected]>
Thread-Topic: ARB Issue Committed: Button navigation and Declarative States
Thread-Index: AcnOqlv/oTWkTNjMukqDP18VFO76uACeTE1U
In-Reply-To: <C6277898.7F37%[email protected]>
Mime-version: 1.0
Content-type: multipart/alternative;
boundary="B_3324878165_1545235"
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
--B_3324878165_1545235
Content-type: text/plain;
charset="US-ASCII"
Content-transfer-encoding: 7bit
the ARB issue at:
http://opensource.adobe.com/wiki/display/flexsdk/buttonnavigationand+declara
tive+states
has been updated with a decision (in short, keep the status quo).
Ely.
--B_3324878165_1545235
Content-type: text/html;
charset="US-ASCII"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>ARB Issue Committed: Button navigation and Declarative States<=
/TITLE>
</HEAD>
<BODY>
<FONT FACE=3D"Calibri, Verdana, Helvetica, Arial"><SPAN STYLE=3D'font-size:11pt=
'><BR>
<BR>
<BR>
</SPAN></FONT><BLOCKQUOTE><FONT FACE=3D"Calibri, Verdana, Helvetica, Arial"><=
SPAN STYLE=3D'font-size:11pt'>the ARB issue at:<BR>
<BR>
<a href=3D"http://opensource.adobe.com/wiki/display/flexsdk/button+navigation=
anddeclarative+states">http://opensource.adobe.com/wiki/display/flexsdk/bu=
ttonnavigationanddeclarativestates
has been updated with a decision (in short, keep the status quo).
Ely.
B_3324878165_1545235graf_ix_guru wrote:
>
> Hey everyone I am new, and really could use some help.
> I have created button symbols in Fireworks with Pop-Up
Menus. As of right now
> I have 4 states. The up, over, down and over while down.
Everything is working
> great except when the user clicks on the navigation
button they get taken to
> the top of the page.
On click should open a new page, yes? So it won't matter.
Linda Rathgeber [PVII] **Adobe Community Expert-Fireworks**
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
Design Aid Kits:
http://www.webdevbiz.com/pwf/index.cfm -
Buttons call to action with Google
Hello
My landing page for mobile works great buttons call to action with the Safari browser.
But with Google Chrome and Google mobile search, do not work, have to leave your finger for several seconds, you see a menu with buttons to open, copy and cancel. But do not call!
Here the URL.
http://www.hotelruacuernavaca.com/phone/hotel-ejecutivo-en-cuernavaca.html
Thanks
Héctor
[email protected]You can surely create a popup on your page :
https://www.youtube.com/watch?v=Ufsz0V_CRLw
Not an exact solution , but you can use a little tweak and use in similarly way.
Thanks,
Sanjit -
Revision: 21066
Revision: 21066
Author: [email protected]
Date: 2011-04-13 02:42:33 -0700 (Wed, 13 Apr 2011)
Log Message:
Navigation: Added missing test runner SWC for test project.
Modified Paths:
cairngorm3/trunk/libraries/NavigationParsleyTest/.actionScriptProperties
Added Paths:
cairngorm3/trunk/libraries/NavigationParsleyTest/libs/
cairngorm3/trunk/libraries/NavigationParsleyTest/libs/flexunitUIRunner-4.1-RC2.swcHi DST
This is a great effort and gesture. thank you on behalf of all the newbies.
PJ -
Help!! Buttons with different actions on IPAD
Why is in Ipad a button with different actions does not respond to these actions at the same time, but one at a time? In Android works fine!!
What is happening is that in ipad I have to touch more than once on the button to go to the different actions that this button has!
Help...Hi Tomas
thanks for the quick response. I think mine Adobe Content Viewer is the last update, from February 21, so the problem is not due to this.
II'll explain the situation better, i have several identical situations. For example, I have a square that hides an image and I want that when you tap this square this image appears behind him, then i did the following: I selected at first the square and the image and transformed a multi- State Object, in which the first state is the box (State1) and the second is the image (state 2) then made a transparent button on top of this square and it gave the following actions - on release go to state 2 (image) here everything goes well, the problem is that as I have more buttons / squares that do the same and show different images, that when I turned the other one the next hide her image. So all the buttons in addition to the state that shows the picture / object matching (state 2) - i have also- go to state (name of the object: state 1) causes other squares hide their files, as they get the state 1. Here lies the problem, in ipad these actions do not react automatically but in different touches, it seems that it reads a touch for action and not all at once.
I apologize for my English but I'm Portuguese, I hope you can understand everything explained.
Marta
Maybe you are looking for
-
Hi I hv to develop a report for the import PO,which shd display the import PO released on the date entered in selection screen.Also the Order amount like(usd,eru) shd be displayed along wid the Order amt in INR for comprasion.wr Selection-screen - 1
-
Hi All While creating a sales order, the pricing should be determined based on Product line item. For Example: If Line item 10 has Product X and if the same Product X is taken again for line item 20 then the system should give discount based on prece
-
Best way to do a 4:3 pan & scan in terms of resolution?
Brethren, I need to deliver a broadcast quality version of my project in 4:3 pan-and-scan. The project is made up of five 20 minute long pieces, usually holding about 1 or 2 layers of video, sometimes 3 or 4. I've read a few other threads on this top
-
What method should I look into for creating a settings file? I've tried doing it in SQLite, XML, and my own format... only to have trouble every time. So, what popular methods are used (that are decently documented) for creating program settings file
-
Is there any way to modify the photo book size after I have created the book?
I created a photo book then realized it was not the correct size. Is there a way to correct the size or do I have to start from scratch? I Found the answer after I posted this- CTRL D to duplicate, then choose new theme - Worked like a charm.