Button NEW disable on Installation Partitions - UCS-CSU.
I have a C240 and I used the Cisco UCS Server Configuration Utility to create a RAID 1, now I'm trying to create a new partition, but when I choose a free space, the button NEW remains disabled.
I'm beginner in the UCS world, so if someone can help me, I appreciate.
Thanks.
HI Erick,
What kind of raid controller do you have installed on this server. If you have an LSI controller, I recommend that you try configuring the raid volume using the WebBiosUility. Below is a link to a document that can walk you through the configuration steps of this controller via this utility.
http://www.lsi.com/downloads/Public/MegaRAID%20Common%20Files/51530-00_RevF.pdf
Similar Messages
-
As I downloaded new software upgrade in my iPod nano 7 th gen and also new iTunes upgrade then all data on my iPod got erased and now when I am trying to sync it again then sync button is disabled on the windows screen . Kindly help
From the OP: "My old computer got a virus and when that happened all my music was lost. "
They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod. -
Used createinstallmedis to make a copy of the Mavericks app for use in a new hard drive install.. Copied find but gave error code 110 and failed to make the flash drive bootable.. Any help in what errror code means?
Did you partition and format the flash drive first? See the following:
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
Make your own Mavericks flash drive installer using the Mavericks tool:
Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time. -
Mouse Clicks' Queue when Button is Disabled
Hi, I was wondering about the Disable property for UI
Components.
In the docs it says that when the component is disabled it
ignores all
interaction whatsoever - in particular - user interaction.
In my case, the button is disabled for a few seconds right
after it
was clicked by the user (I disable it till the httprequest is
returned
and then enable it).
What happens is that if the user clicks the button while it's
disabled
- nothing happens. But when the button turns enabled - it
acts as if
it just got the click event.
It seems like the mouse click event went into this queue and
the
button listened to it right after to turned enable?
Am I correct? If so - how can I prevent this problem?
If I'm wrong, what's the reason for this? And again, how can
I sort
this so the user can't send mouse clicks to the button when
it's
disabled??
Many thanks :)
Gilad"giladozer" <[email protected]> wrote in
message
news:gnbng6$o6m$[email protected]..
> Hi, I was wondering about the Disable property for UI
Components.
> In the docs it says that when the component is disabled
it ignores all
> interaction whatsoever - in particular - user
interaction.
> In my case, the button is disabled for a few seconds
right after it
> was clicked by the user (I disable it till the
httprequest is returned
> and then enable it).
> What happens is that if the user clicks the button while
it's disabled
> - nothing happens. But when the button turns enabled -
it acts as if
> it just got the click event.
> It seems like the mouse click event went into this queue
and the
> button listened to it right after to turned enable?
> Am I correct? If so - how can I prevent this problem?
> If I'm wrong, what's the reason for this? And again, how
can I sort
> this so the user can't send mouse clicks to the button
when it's
> disabled??
No idea about whether you're correct or wrong, but you might
want to try
setting mouseEvents = false on the button and see if that
helps. -
Hello Gurus,
I have configured Emergency Access Management in GRC AC 10.
GRC Box (SID) : GR1 client 100
Backend ERP system : D24 client 100
The FIREFIGHTER in GRC system : FFUSER1
Z_SAP_GRAC_SUPERUSER_MGMTUSER
Z_SAP_GRC_FN_BASE
Z_SAP_GRC_NWBC
In the Backend ERP system the FIREFIGHTER ID: ABC wants to access the FIREFIGHTER(FFUSER1)
Hence in NWBC (Setup >Superuser Assignment>Firefighter ID) the assignment is done.
ABC(FIREFIGHTER ID) <--->FFUSER1(FIREFIGHTER)
Now the User login the GRC system using FFUSER1 assigned following roles
Z_SAP_GRAC_SUPERUSER_MGMTUSER
Z_SAP_GRC_FN_BASE
Z_SAP_GRC_NWBC
Z_SAP_GRAC_SPM_FFID
and runs Transaction: GRAC_SPM
and he is able to see that ABC is assigned .
Now the user clicks on "Logon" and the status changes from green to "RED".
A new SAP screen opens asking credintials for Backend ERP system D24 client 100
The User enters his own Id : ABC and password and logs in.
Runs the necessary transactions and logs out using transaction: /nex
The session in GRC is still running and now the "LOGON button" is disabled , he comes out of that screen too.
When the user tries to login again using FFUSER1 to do more task , the "LOGON Button" is seen disabled.
and clicking the "unlock" button also doesn;t help.
When checked in SM04, no live session is reflected .
How can we "enable" the LOGON button in the transaction : GRAC_SPM for the same FIREFIGHTER (FFUSER1) assigned for Firefighter ID (ABC) ??
As it is now not possible to click "LOGON" button and the status is "RED".
Please let me know your opinion .
Thank You.
Regards,
PremjitThanks to All
-
Delete Button is disabled in Check status
Hi Experts,
We are on SRM 7.0 . In Check status POWL, if the shopping cart is in 'Awaiting approval' stage requisitioner can only display the cart , we want him to able to delete the cart as well but the delete button is disabled.
We have assigned 'medium' level authorization in 'BBP_WFL_SECURITY' then the user can go into the details edit it and delete it..
But we want the 'Delete' button to be enabled on POWL screen. It is enabled if the SC is in 'Saved' status.
Any clues to achieve this?
Thank you,
LavanyaHi Virendar / MASA
Is RECALL facility new im SRM 700 ?
till SRM 550 REQUESTER can delete his/her cart even till follow on docuemnt created ( before confirmation done)
ln SRM 550 , requester can delete his cart though STATUS awaiting for approval / contains error/ error in process /po created.
Muthu -
I want a stop button for disabling JavaScript only in the current tab
I want a 'Stop' button for disabling JavaScript only in the current tab.
I searched for a feature like this but couldn't find it. It would be a great new feature.Tab Permissions: https://addons.mozilla.org/firefox/addon/4757
-
Commit Button Still Disabled After Table Edit
I am using JDeveloper 11.1.1.6.
I have a table on my page that is clickToEdit.
I have CreateInsert and Delete buttons.
I have Commit and Rollback buttons that are initially disabled.
When I edit the value of an existing field and press Enter, the Commit and Rollbak buttons remain disabled.
If I add a new record to the table, the Commit and Rollback buttons are enabled (as expected).
I know I can add a partial trigger to the button with the id of the table, but the final application will have many tables.
I don't want to add each table id to the partial trigger of the buttons.
How can I set it up so the Commit and Rollback buttons are enabled after a table modification?
Thanks,
RayArun,
Thanks for the info, but it looks like this thread has the same problem.
The thread states "Do not forget to include the 'Commit' button as a PPR target in order the button to be refreshed."
I assume this means I need to add the control's id to the commit button's Partial Triggers. This results in the same problem as stated originally.
Am I missing something?
Ray -
I want to completley disable the installation and/or use of add-ons in Firefox 4. I don't want anybody that logs onto either of my computers to be able to use add-ons and I can't find a way to disable it in the configuration files. I've found ways to lock down other options like updates etc. but I cannot find a way to completely disable add-ons.
See:
* http://kb.mozillazine.org/Locking_preferences
You can use a mozilla.cfg file to lock prefs or specify default values.<br />
You can place a file local-settings.js in the defaults\pref folder to specify using mozilla.cfg.
You can use these functions in mozilla.cfg:
defaultPref(); // set new default value
pref(); // set pref, but allow changes
lockPref(); // lock pref, disallow changes
To prevent users from installing software use:
<pre><nowiki> //
lockPref("xpinstall.enabled" ,false);
</nowiki></pre> -
SP2013 "Create Service Applicationt" and "Service Applications' Property" buttons are disabled
Hello,
I’ve verified that I am local admin on the server that is hosting central admin.
I run the browser as admin. In fact I am using Central Admin on the start menu. The UAC is disabled on the box any way
I run the browser on the machine that is hosing CA. I've tested in on many other machines.
I verified and my user is farm admin. That means I can see my logged-in user listed in CA->“Manage the farm administrators group”
IE Enhanced Security is off
Still I cannot create a service application or see any service application’s property. How to find where exactly is the problem?
Thank youHi Allan48,
What did you mean ‘cannot create a service application’?
Whether you meaned that the New service application button was disabled or not services applications were listed when you clicked the button.
By default, there are some services applications whose properties are disabled, for example Access Services Application and Excel Services Application etc.
Please make sure that SharePoint Web Services Root Application pool is running in Internet Information Services Manager, then check if this issue occurres.
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support -
Draw lines and columns button was disabled
hi friends,
in my smartform template draw lines and columns button was disabled which results select pattern button also disabled. now i am unable to change any lines, can any one help me how to enable this button to change.
thanks and regards,
venkat suman.Hi
I come to the same problem and google lead me here.
Not the problem of Display/Change mode or authorization.
I fix this problem as below:
1) create a new smartform and create a template
2) click the "Settings" button
3) in tab General, check the "Draw Lines and Columns", click OK
4) exit without saving
5) now I can use the "Draw Lines and Columns" button
but here when I click the Settings button again, the "Draw Lines and Columns" is unchecked.
Hope this can help
May some mentor give an explanation. -
Button is disabled or not in the next page
i have a scenario i have two JSP pages in which from the first we will be redirected to the second page. in the second page we have a save button. the save button will be disabled in some conditions. if the save button is disabled then we have to keep the first page as read only. we can't modify any feilds in that.
thanks in advance.
please help me its very urgetn for me.
once again thanks alot in advacne.Just test those conditions in the 1st page as well.
-
Command button remains disabled after a request redirect to a PDF Servlet
Hi All,
I've a command button to generate PDF on the fly and used to work in JDev 10.1.3.3.
When we migrated to 11g, it works for the first time on a page, and the file Open/Save dialog will come up.
But then the command button remains grayed out, and clicking doesn't generate a server call.
If I do something on the page which does a partial or full submit, then the button will get enabled again.
Any suggestions?
Thanks,
Jaimon
Sample code:
Facelets:
<af:commandButton text="Create PDF" action="#{fs02.createPDF}" />
Java:
public String createPDF() {
//Validation checks here. If there are any errors, it gets added to FacesMessages to display on the same page.
if(!validate()) {
//sf.addInfoMessage('message here..');
}else {
FacesContext ctx = FacesContext.getCurrentInstance();
HttpServletRequest request = (HttpServletRequest)ctx.getExternalContext().getRequest();
HttpServletResponse response = (HttpServletResponse)ctx.getExternalContext().getResponse();
RequestDispatcher rd = request.getRequestDispatcher("/pdfdownloader");
rd.forward(request, response);
ctx.responseComplete();
return null;
pdfdownloader is mapped as a servlet, which writes the actual PDF content as a stream.Herewith the code which is triggered with the post-forms-commit trg. As far as I can see it, there is no code to disable/enable the save button in the menubar.
===
PROCEDURE validate_enbr_records IS
CURSOR c_enbr
IS
SELECT exlb.exlb_length
, enbr.enbr_ind_break
FROM dog_envelop_breaks enbr
, dog_extrnl_labels exlb
WHERE enbr_appl_cod = :flow_appl_cod
AND enbr_flow_cod = :flow_cod
AND enbr_sort_seqnr <> :enbr_sort_seqnr
AND enbr_appl_cod = exlb_appl_cod
AND enbr_exlb_cod = exlb_cod;
CURSOR c_exlb
IS
SELECT exlb_length
FROM dog_extrnl_labels
WHERE exlb_appl_cod = :flow_appl_cod
AND exlb_cod = :enbr_exlb_cod;
l_lengte_break_label NUMBER := 0;
l_lengte_sort_label NUMBER := 0;
l_length NUMBER := 0;
l_aant NUMBER := 0;
r_enbr c_enbr%ROWTYPE;
mi_id MenuItem;
BEGIN
FOR r_enbr in c_enbr LOOP
IF r_enbr.enbr_ind_break = 'Y'
THEN
l_lengte_break_label := l_lengte_break_label + r_enbr.exlb_length;
ELSE
l_lengte_sort_label := l_lengte_sort_label + r_enbr.exlb_length;
END IF;
l_aant := l_aant + 1;
END LOOP;
OPEN c_exlb;
FETCH c_exlb INTO l_length;
CLOSE c_exlb;
IF :enbr_ind_break = 'Y' THEN
l_lengte_break_label := l_lengte_break_label + l_length;
ELSE
l_lengte_sort_label := l_lengte_sort_label + l_length;
END IF;
IF l_lengte_break_label > 48
THEN
qms$errors.show_message('DOG-10194');
END IF;
IF l_lengte_sort_label > 50
THEN
qms$errors.show_message('DOG-10195');
--set_record_property(3,'enbr',status,changed_status);
END IF;
IF :system.record_status = 'CHANGED' THEN
set_menu_item_property('FILE_MENU.SAVE',ENABLED,'YES');
END IF;
END;
===
After the message has been throughn and the OK-button has been clicked, the code is never reaching the code:
IF :system.record_status = 'CHANGED' THEN
set_menu_item_property('FILE_MENU.SAVE',ENABLED,'YES');
END IF;
The save-button remains disabled.
Best regards
John. -
How can I add a new column in compress partition table.
I have a compress partition table when I add a new column in that table it give me an error "ORA-22856: CANNOT ADD COLUMNS TO OBJECT TABLES". I had cretaed a table in this clause. How can I add a new column in compress partition table.
CREATE TABLE Employee
Empno Number,
Tr_Date Date
COMPRESS PARTITION BY RANGE (Tr_Date)
PARTITION FIRST Values LESS THAN (To_Date('01-JUL-2006','DD-MON-YYYY')),
PARTITION JUNK Values LESS THAN (MAXVALUE));
Note :
When I create table with this clause it will allow me to add a column.
CREATE TABLE Employee
Empno Number,
Tr_Date Date
PARTITION BY RANGE (Tr_Date)
PARTITION FIRST Values LESS THAN (To_Date('01-JUL-2006','DD-MON-YYYY')),
PARTITION JUNK Values LESS THAN (MAXVALUE));
But for this I have to drop and recreate the table and I dont want this becaue my table is in online state i cannot take a risk. Please give me best solution.Hi Fahed,
I guess, you are using Oracle 9i Database Release 9.2.0.2 and the Table which you need to alter is in OLTP environment where data is usually inserted using regular inserts. As a result, these tables generally do not get much benefit from using table compression. Table compression works best on read-only tables that are loaded once but read many times. Tables used in data warehousing applications, for example, are great candidates for table compression.
Reference : http://www.oracle.com/technology/oramag/oracle/04-mar/o24tech_data.html
Topic : When to Use Table Compression
Bug
Reference : http://dba.ipbhost.com/lofiversion/index.php/t147.html
BUG:<2421054>
Affects: RDBMS (9-A0)
NB: FIXED
Abstract: ENH: Allow ALTER TABLE to ADD/DROP columns for tables using COMPRESS feature
Details:
This is an enhancement to allow "ALTER TABLE" to ADD/DROP
columns for tables using the COMPRESS feature.
In 9i errors are reported for ADD/DROP but the text may
be misleading:
eg:
ADD column fails with "ORA-22856: cannot add columns to object tables"
DROP column fails with "ORA-12996: cannot drop system-generated virtual column"
Note that a table which was previously marked as compress which has
now been altered to NOCOMPRESS also signals such errors as the
underlying table could still contain COMPRESS format datablocks.
As of 10i ADD/SET UNUSED is allowed provided the ADD has no default value.
Best Regards,
Muhammad Waseem Haroon
[email protected] -
In Table contol,add and subtract button getting disabled.
Hi ,
My requirement is that in table control when user adds more than four rows,error message will be displayed i.e maximum of 4 rows allowed.
But after error message is displayed ,add and subtract button is disabled in table control and I am not able to remove the rows.
Any solution available on making add and subtract button active.
Regards
NikhilHi
In PBO,
module status_100.
looop at itab with control tc.
endloop.
in program
module status_100.
describe table itab lines tc-lines.
if tc-lines = 0.
tc-lines = 4.
elseif tc-lines > 1.
tc-lines = 4.
endif.
endmodule.
here there is no way you will get more than 4 rows at any time.
instead of Error message you can give warning or information message. this will not disable your buttons.
Cheerz
Ram
Maybe you are looking for
-
I have been working on an illustration in Photoshop for a few months now. When I tried to open it yesterday it came up as a single layered black image with a few red lines at the top. I have no idea what this is. I have not even used red in my artwor
-
Very Poor Quality after Importing from Time Machine
I lost iMovies for some reason when I upgraded to Maverick. I imported my iMovie events from Time Machine into iMovie 10 but the quality is now horrible. Anyone know how to correct this? DO I have to import a differnet way? Gratefully yours, Daniel
-
Can I place a title over a picture ? in iphoto11
I would like to put a title on a picture so that when i send it to someone they cant copy my image.
-
Expression Language Problem in Jsp
Hi, I am using EL to get the values stored in session for displaying it in JSP page. I can get the values from the session, but when stored in a jsp page to a hidden variable, the values are terminated if it the value contains any symbols like "",[],
-
Withdrawing a Publication - E-Recruiting
Hi gurus, Help Sap says: Withdrawing a Publication Use You can withdraw publications that you have published in your intranet or in the Internet. The associated job posting is then no longer visible to candidates. You can also withdraw publications