Buttons disabled while creating JCO- SLD configured in solman

Hi All,
I have configured SLD in solman.And I have made relevant entries in Visual Administrator also.
When I try to create jco in my portal,all buttons are disabled.
I had faced this problem when I had configured SLD in portal itself and that got resolved after I searched through the forum.
But here I have no clue where i am going wrong.
Regards
Akshaya

Hi,
Check all these in VA.
Go to Visual Composer
1)Make new Connecion
a)User name->
b)Host ->
c)Port->50004
Goto cluster ->got to server->services->sld Data supplier.
Set RFC Settings
a)Gateway Host ->ip of ep
b)GateWay service/port->sapgw00/3300
CIM client generation settings
Host->ip address of ep
Port ->50000
user->
Set Http Settings
Host->ip of ep
port->50000
user->j2ee_admin
Do these steps and check the CIM generation has displayed successfully or not.?
It might helps you.

Similar Messages

While created JCO i got following exception plese guide me

Hi Guru.
While created JCO i got following exception. I configured SLD also.
I dint select message server information while cretin of JCO. it would mandatory for creating JCO. because i dint get in information about message server while creating of JCO. if it need where can configure to get Message server in formation. please give me some guide lines
Failed to create new JCO client connection WD_MODELDATA_DEST: com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscapeException: Error while obtaining JCO connection. at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:150) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.createJCOClientConnection(SystemLandscapeFactory.java:356) at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.createJCOClientConnection(WDSystemLandscape.java:107) at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionFinish(ButtonBar.java:224) at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:265) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:659) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59) at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve connection parameter for WD_MODELDATA_DEST at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter4MsgServerJCODestination(JCOClientConnection.java:670) at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter(JCOClientConnection.java:486) at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.init(AbstractJCOClientConnection.java:252) at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.<init>(AbstractJCOClientConnection.java:226) at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.<init>(JCOClientConnection.java:106) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:148) ... 30 more Caused by: java.lang.NullPointerException at java.util.Hashtable.put(Hashtable.java:393) at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter4MsgServerJCODestination(JCOClientConnection.java:564) ... 35 more
Best regards
Ramana

Hi.
Thanks for your response.
But I am working for WebDynpro For JAVA with R/3 BAPI calls.
For this scenarios , we would configure for WEB AS ABAP??
I was configured for WEB AS JAVA..
Could you please confirm me.
While configure of WEB AS for ABAP. i have following attributes
1. Web AS ABAP Name (SID):
2. Installation Number
3. Database Host Name:
I need to ask BASIS guy for this setup.
Best regards
Ramana

Exception while creating JCo client connection Failed to create

Hello all -
I am trying to create JCo metadata connections and I am getting the below error trace.
Exception while creating JCo client connection Failed to create new JCO client connection SAP_R3_HumanResources_Metadata: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to change password for key SAP_R3_HumanResources_Metadata in secure storage at com.sap.tc.webdynpro.serverimpl.wdc.sl.SecureStorageWrapper.changePassword(SecureStorageWrapper.java:149) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.createJCOClientConnection(SystemLandscapeFactory.java:299) at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.createJCOClientConnection(WDSystemLandscape.java:107) at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionFinish(ButtonBar.java:265) at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:265) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176) Caused by: com.sap.security.core.server.securestorage.exception.ObjectStorageException at com.sap.security.core.server.securestorage.remote.RemoteSecureStorageClientContextImpl.storeObject(RemoteSecureStorageClientContextImpl.java:600) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SecureStorageWrapper.changePassword(SecureStorageWrapper.java:137) ... 33 more
Could anybody please suggest what is wrong with this creation?
Thanks much!!

Hi Maria,
Please update the host and sevice file first then check the SLD test and SLD Data supplier in visual admin.
Also check and verify the data using in the Jco destination creation.
Hope it will helps
Regards
Arun Jaiswal

SLD problem while creating JCO

Hi all,
I am creating JCO from WebDynpro Content Administration for a RFC model but when I go to JCO connections it don't allow me to create. The link is disabled and when I "check SLD" it gives error "Connection to System Landscape Directory (SLD) could not opended successfully"
can any one help me in this?
Thanks
Ninad

Hi,
You can check and modify the SLD configuration settings of the J2EE Engine using the Visual Administrator. Log on as an administrator user and double click on Server -> Services -> SLD Data Supplier.
Switch to tab CIM Client Generation Settings. If the HTTP connection parameters host, port, user and password are not set, then the SLD is not configured to be used by Web Dynpro applications. Configure the parameters with the values of the central SLD system and save the configuration. Select CIMClient Test to test if the configuration data is correct and the connection to SLD could be established.
http://help.sap.com/saphelp_nw04/helpdata/en/f4/1a1041a0f6f16fe10000000a1550b0/frameset.htm
Regards
Ayyapparaj

Error while creating jco connection for metadata?

Hi all,
we are using ep 6 sp 16.
I could create the JCO connection for application data but i am not able to create the jco connection for metadata for the same r3 server .
while creating the the connection
system name and logon group and disable
and when i click finish
it is giving following error
Failed to create new JCO client connection testmetadata: com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscapeException: Error while obtaining JCO connection. at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:150) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.createJCOClientConnection(SystemLandscapeFactory.java:356) at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.createJCOClientConnection(WDSystemLandscape.java:107) at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionFinish(ButtonBar.java:224) at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:265) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:659) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59) at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:180) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve connection parameter for testmetadata at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter4MsgServerJCODestination(JCOClientConnection.java:670) at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter(JCOClientConnection.java:486) at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.init(AbstractJCOClientConnection.java:252) at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.<init>(AbstractJCOClientConnection.java:226) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:148) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.createJCOClientConnection(SystemLandscapeFactory.java:356) at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.createJCOClientConnection(WDSystemLandscape.java:107) at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionFinish(ButtonBar.java:224) at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:265) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:659) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59) at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:180) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: java.lang.NullPointerException at java.util.Hashtable.put(Hashtable.java:606) at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter4MsgServerJCODestination(JCOClientConnection.java:564) at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter(JCOClientConnection.java:486) at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.init(AbstractJCOClientConnection.java:252) at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.<init>(AbstractJCOClientConnection.java:226) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:148) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.createJCOClientConnection(SystemLandscapeFactory.java:356) at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.createJCOClientConnection(WDSystemLandscape.java:107) at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionFinish(ButtonBar.java:224) at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:265) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:659) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59) at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:180) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Thanking.
Rajendra

Hello Rajendra,
Good to hear from u. Let me try to give a soln for this problem of yours.
I think probably the logon group has not been specified in the backend.If thats the case then do the following:
Connect to the backend server for which you are trying to create the JCO. Run the transaction SMLG. It will show u the existing logon groups. carry out the following steps if the 'PUBLIC' group is not present in the list of logon groups.
Click on the create button. In the pop-up, type the logon as 'PUBLIC'. For the instance, select the F4 help and choose the existing instance number. Click on copy and click save. Try running the transaction /nsmlg and now it should show the logon group 'PUBLIC'.
When you create the JCO connection, it should now show the logon group 'PUBLIC'.
Regards,
Prathamesh.

Error in while creating JCo's

HI all,
I am getting a error while creating a JCO's .When i am going to web dynpro content administrator and clicking on maintain JCo connections and then click on the create button in the JCo I am getting a exception.Below is the error what i am getting .Please somebody help us.
500   Internal Server Error
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:991)
    at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
    at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateJCODestinations(NameDefinition.java:272)
    at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateNavigation(NameDefinition.java:237)
    at com.sap.tc.webdynpro.tools.sld.NameDefinition.wdDoInit(NameDefinition.java:144)
    ... 45 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; InfoPath.2)
Version null
DOM version null
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0009.20060804145649.0000 (release=645_VAL_REL, buildtime=2006-08-26:14:41:58[UTC], changelist=413534, host=pwdfm101), build date: Thu Mar 19 12:14:50 IST 2009
J2EE Engine 7.00 patchlevel
Java VM Java HotSpot(TM) 64-Bit Server VM, version:1.4.2_19-rev-b07, vendor: Sun Microsystems Inc.
Operating system Windows 2003, version: 5.2, architecture: amd64
Session & Other
Session Locale en
Time of Failure Thu May 14 16:58:44 IST 2009 (Java Time: 1242300524924)
Web Dynpro Code Generation Infos
sap.com/tcwdtools
No information available null
sap.com/tcwddispwda
No information available null
sap.com/tcwdcorecomp
No information available null
Detailed Error Information
Detailed Exception Chain
java.lang.NullPointerException
     at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:991)
     at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
     at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateJCODestinations(NameDefinition.java:272)
     at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateNavigation(NameDefinition.java:237)
     at com.sap.tc.webdynpro.tools.sld.NameDefinition.wdDoInit(NameDefinition.java:144)
     at com.sap.tc.webdynpro.tools.sld.wdp.InternalNameDefinition.wdDoInit(InternalNameDefinition.java:236)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
     at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:789)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.performNavigation(ViewManager.java:296)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:767)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.navigate(ClientComponent.java:873)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doNavigation(WindowPhaseModel.java:498)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:144)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

Hi Ambarish,
Yes, it seems to be NW 7.0. Please upgrade Java(NW 7.0) to SP 12 or higher. I guess latest is 17.
Before upgrading Java, better if you un-install all VIRSA components, and re-install it after applying Java patch. ALso make sure Kernel version is upgraded before applying Java patch.
Take this sequence-
1. Un-install VIRSA components
2. Update Kernel
3. Update Java patch
4. Install VIRSA components.
5. Apply latest patch of VIRSA components.
6. Apply latest RTA patches in backend system.
Regards,
Sabita

Exception while creating JCO destinations

Hello,
I have deevloped a webdynpro application as a local DC and trying to deploy and run it. While doing this step it throws an exception as "NullPointerException" when i click on create JCO connection.
The error details are like :
"at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:991)
    at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
    at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateJCODestinations(NameDefinition.java:272)
    at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateNavigation(NameDefinition.java:237)
    at com.sap.tc.webdynpro.tools.sld.NameDefinition.wdDoInit(NameDefinition.java:144)"
Can anyone please help me how to resolve this problem.
Thanks.
- points rewarded for helpful solution

Hi,
The Following Procedure Follow To Create JCO Destinations.
First You Configure SLD Correctly.If You Have ECC And BW.You Maintaing Two WEBAS ABAP Systems.
You Create WEB AS ABAP System In SLD And Maintain Connection Properties Of ECC.And
Similarly For BW Also.
If You Want To Create JCO Destinations.You Go To Login Portal
Content Administration->Webdynpro->Create JCO Destinatiion
A.General Data -> Specify Model Name,Client And JCO Pool Configuration
B.Specify J2EEE Cluster
C.Destination type
Data Type-> Application DataModel,Dictionary MetaDataMetadata
Destination Type->Load Balancing Or Single Server
D.Specify Either Application Server Or Message Server
E.SecurityUsername,password,confirm password,language
F.SummaryWhole Information
Similarly Metadata Created Follow Same Steps As Above
After Creating JCO Destinations, Go For Maintain JCO Destination And test The JCO Destinations Works Fine Or Not you Con Test.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/webdynpro/wd%20java/portal%20integration/how%20to%20use%20the%20web%20dynpro%20content%20administrator.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/85a483cb-0d01-0010-2990-c5168f01ce8a
http://help.sap.com/saphelp_nw04/helpdata/en/77/931440a1c32402e10000000a1550b0/frameset.htm
The Given Below Links To Help You SLD Cofiguration For J2EE
http://www.*********************/solution_manager/solution_manager_sld.html
SLD Configuration
It's Useful Rewards Points
Bye
Thanks
SubbaRao

RFC error while creating JCo Destinations

Hi Team,
We have been getting RFC_Communication_Error over time and again while creating MetaData type JCo Destination in EP 7. Actually We am configuring a Business package for ESS.
I am pasting the error,
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=<server> GROUP=public R3NAME=<xxx> MSSERV=sapms<yyy> PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR service 'sapms<yyy>' unknown TIME Tue Jun 12 16:43:08 2007 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -3 MODULE ninti.c LINE 530 DETAIL NiPGetServByName2: service 'sapms<yyy>' not found SYSTEM CALL getservbyname_r COUNTER 4
We have created Application type connections successfully. the tests on these were also successful.
Thank you,
Vamshi

Can u pl check for the entry in the services file of the JAVA Engine/portal.
sapmsQ10 36XX/tcp
If this entry is not there please create the same @ ..WINDOWS\system32\drivers\etc\ open the services file in notepad and make an entry in the last line.
format is
sap<SID> Press TAB once 36XX/tcp<Press Enter>
where XX is the Instance no of your Java Central Instance.
If the prob persists please update.
Priyabrata

Trackpad "buttons" disabled while holding down key on keyboard

Hello,
ben having the following issue with the trackpad on this laptop:
when playing games and holding down the W-key for example, the click functionality on the trackpad seems to be disabled. Neither tapping the trackpad nor clicking the lower left side works, untill i release the said keyboard key.
the most usual issue, the entire trackpad beign disabled while typing is already "fixed" by turning the palm check off entirely. But dont seem to find option that enables the mouse button presses.

@kekeplasteri ,
Hello and thank you for posting on the HP support forums. Here is a link you may find of use to help you with your touchpad issue.
Using and Troubleshooting the TouchPad or ClickPad (Windows 8)
Please let me know how things go.
Post back if you need any further assistance.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Getting the following error while creating a new configuration

Hi team,
I am trying to create configuration of my web dynpro application. When
I right click on my application and choose create/change configuration,
browser started. Now when I give a name ( e.g zabc) to it and choose the
function create, the following error occurs... Can you please give me
suggestion to overcome it
Error when processing your request
What has happened?
The URL https://gsdcb261.in.ibm.com:8443/sap/bc/webdynpro/sap/zims_issue/ was not called due to an error.
Note
The following error text was processed in the system SD4 : Screen output without connection to user.
The error occurred on the application server gsdcb261_SD4_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLSKEY
Function: TADIR_OBJECT_CHECK of program SAPLSKEY
Function: CHECK_ACCESS_KEYS of program SAPLSKEY
Method: CHECK_TROBJ_BEFORE_EDIT of program CL_WD_CONFIGURATION_MODEL=====CP
Method: FILL_APPL_CONFIG_CONTEXT of program CL_WD_CONFIGURATION_MODEL=====CP
Method: UPDATE_APPLICATION_TREE of program /1BCWDY/0A4VPNTYZEA2W6Q9CMDX==CP
Method: IF_COMPONENTCONTROLLER~UPDATE_APPLICATION_TREE of program /1BCWDY/0A4VPNTYZEA2W6Q9CMDX==CP
Method: ONACTIONACTION of program /1BCWDY/0A4VPNTYZEA2W6Q9CMDX==CP
Method: ONACTIONACTION of program /1BCWDY/0A4VPNTYZEA2W6Q9CMDX==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/0A4VPNTYZEA2W6Q9CMDX==CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SD4 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server gsdcb261_SD4_01 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server gsdcb261_SD4_01 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-https -c: 100 -u: AGAURAV -l: E -s: SD4 -i: gsdcb261_SD4_01 -w: 0 -d: 20070426 -t: 200845 -v: RABAX_STATE -e: DYNPRO_SEND_IN_BACKGROUND
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Hello Thomas,
I am sorry but I haven't check this forum in the last weeks because of lack of time. Thanks for your hint regarding a potential solution. Taking a look a the note I have some problem in "using" it.
This note contains a number of potential solutions regarding our problem.
Solution 1.) one could use the modification as described. Surprising to read that SAP is saying: do a modification to solve the problem. => this is only possible "manually" I am not sure If I will follow this approach
Solution 2.) Change the URL: This solution scenario I do not understand. The solution path is "very" short and not very instructive. This is the story:
You can do this by adding "_OLD" to the name of the application of the URL created for the configuration: Use "CONFIGURE_APPLICATION_OLD" instead of "CONFIGURE_APPLICATION"
and "CONFIGURE_COMPONENT_OLD" instead of "CONFIGURE_COMPONENT". If you want to use this function as your standard, you have to change the original application. To do this, set the parameter "OLD_TR" to "X".
This solution path is "to short". I do not get the "message" what to do.
Furthermore: Does that mean you have to use this peculiar solution any time durnig software development of webdynpro components using configurations? In my opinion yes. This is therefore only a "workaround solution" and nothing else.
And there can I find this parameter "old_tr" they are talking about?
Sap note 1060287 is the "same" kind (Symptom of this note:
If you use the configuration editor, there may be errors during transport handling or
DYNPRO_SEND_IN_BACKGROUND crashes.).
Here they are saying:
"Solution
A final solution will be provided for Release 7.0 BASIS Support Package 13."
So in SP13 there seems to be a solution (I haven't found up to now the corresponding note). But does that now mean I must implement the complete support package?
So I am sorry: No progress on my side up to now. May be you have had some success?
With best regards
Christoph

Please help Error while creating JCo

Hi experts,
I am working with the tutorial to display the flight details through Bapi in Webdynpro Java . I successfully deployed the project and now when i logon the content Administrator and select my project form local tree where on the JCo Connections tab when i click create button it saying
500 Internal Server Error
Failed to process request. Please contact your system administrator.
The initial exception that caused the request to fail, was:
java.lang.NullPointerException
at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:991)
at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateJCODestinations(NameDefinition.java:285)
at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateNavigation(NameDefinition.java:250)
at com.sap.tc.webdynpro.tools.sld.NameDefinition.wdDoInit(NameDefinition.java:157)
... 45 more
Experts please help me what's the problem and what i have to do.
-Neo

Hi Neo,
Sorry for the typo mistake...it is Visual Administrator and not Visual Composer.
Steps are as follows:
1. D:\usr\sap\PI1\JC01\j2ee\admin\go.bat
2. Connect using your administrator password.
3. Goto Server->services->SLD Data Suppier->HTTP Settings/ CIM Client Generation Settings
4. Enter details: Host, port, user, password for SLD system.
5. Save and Test the CIMClient test.
Regards,
Sangeeta
PS: Do award points if you find the reply helpful

Error while creating DBConsole -- Error configuring central management

Dear All,
MY DB Oracle 11gR1 on Linux is running fine, however there is a problem in Oracle Enterprise Manager Console.
I dropped and re-create dbconsole using:
emca -config all db -repos create
These are the messages I got after creating it.
Feb 10, 2010 10:31:26 AM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Feb 10, 2010 10:41:28 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
Feb 10, 2010 10:41:41 AM oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepository
INFO: Uploading configuration data to EM repository (this may take a while) ...
Feb 10, 2010 10:43:48 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Uploaded configuration data successfully
Feb 10, 2010 10:43:53 AM oracle.sysman.emcp.util.CentralAgentUtil registerWithCentralAgents
INFO: Registering target(s) with central agent(s) (this may take a while)...
Feb 10, 2010 10:43:57 AM oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing /Oracle/app/oracle/product/11.1.0/db_1/bin/emctl config agent addcentralagent /Oracle/app/oracle/product/11.1.0/db_1 /Oracle/app/oracle/product/11.1.0/db_1
Feb 10, 2010 10:43:57 AM oracle.sysman.emcp.EMAgentConfig performConfiguration
WARNING: Error registering database targets with the central agent(s).
Feb 10, 2010 10:43:57 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Error configuring central management. This target will not be centrally managed
Refer to the log file at /Oracle/app/oracle/cfgtoollogs/emca/bssdevpl/emca_2010_02_10_10_25_26.log for more details.
Could not complete the configuration. Refer to the log file at /Oracle/app/oracle/cfgtoollogs/emca/bssdevpl/emca_2010_02_10_10_25_26.log for more details.
If anyone can help me getting through this error and creating dbconsole.
Thanks,
Imran

CONFIG: isLocalNodeDone: T localNode: null
10:31:26 oracle.sysman.emcp.EMDBPreConfig copyAgentTimeStampFile
CONFIG: File: /path/bss.com_bssdevpl/sysman/emd/agntstmp.txt:bss.com does not exists.
10:31:26 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: bssdevpl, oracleHome: /path, and user: SYS
10:31:26 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
10:31:26 oracle.sysman.emcp.EMReposConfig createRepository
CONFIG: Spooling to /Oracle/app/oracle/cfgtoollogs/emca/bssdevpl/emca_repos_create_2010_02_10_10_31_26.log
10:31:26 oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
10:41:28 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
10:41:28 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter EMAIL_ADDRESS.
10:41:28 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MAIL_SERVER_NAME.
10:41:28 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MAIL_SERVER_SENDER_NAME.
10:41:28 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MAIL_SERVER_SENDER_ADDR.
10:41:28 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: bssdevpl, oracleHome: /path, and user: SYS
10:41:29 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
10:41:29 oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking dbsnmp and sysman
10:41:29 oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Successfully unlocked relevant accounts
10:41:29 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: bssdevpl, oracleHome: /path, and user: SYSMAN
10:41:29 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
10:41:36 oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Finished executing emreposoutofbox.sql
10:41:36 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: bssdevpl, oracleHome: /path, and user: SYSMAN
10:41:38 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
10:41:38 oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Submitting dbms job: /path/sysman/admin/emdrep/sql/core/latest/admin/admin_submit_dbms_jobs.sql
10:41:38 oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Successfully submitted dbms job
10:41:38 oracle.sysman.emcp.EMReposConfig unlockMGMTAccount
CONFIG: Unlocking mgmt view user account
10:41:38 oracle.sysman.emcp.EMReposConfig unlockMGMTAccount
CONFIG: view user sql: declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end;
10:41:38 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: /path/sysman/admin/scripts/emca/emcaDbUtil /path/perl/lib:/path/perl/lib/site_perl:/path/sysman/admin/scripts:/path/bin: /path/perl/bin/perl /path/sysman/admin/scripts/emca/emcaDbUtil.pl /path bssdevpl SYS SYSDBA declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end; 1 SYSMAN_PWD
10:41:41 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 0
10:41:41 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Execution of /path/sysman/admin/scripts/emca/emcaDbUtil /path/perl/lib:/path/perl/lib/site_perl:/path/sysman/admin/scripts:/path/bin: /path/perl/bin/perl /path/sysman/admin/scripts/emca/emcaDbUtil.pl /path bssdevpl SYS SYSDBA declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end; 1 SYSMAN_PWD completed successfully
10:41:41 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Arguments passed /path bssdevpl SYS SYSDBA declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end; 1 SYSMAN_PWD
Connecting to database bssdevpl in home /path with user "SYS" role "SYSDBA".
connected to database.
sql to execute declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end;
noOfParams to bind: 1.
sql execute successfully.
10:41:41 oracle.sysman.emcp.EMReposConfig unlockMGMTAccount
CONFIG: Unlocked mgmt_view account
10:41:41 oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Successfully unlocked mgmt_view account
10:41:41 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
10:41:41 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: bssdevpl, oracleHome: /path, and user: SYS
10:41:41 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
10:41:41 oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: Passed listener validation check.Listener is up and running.
10:41:41 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
10:41:41 oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepository
INFO: Uploading configuration data to EM repository (this may take a while) ...
10:43:48 oracle.sysman.emcp.EMReposConfig invoke
INFO: Uploaded configuration data successfully
10:43:48 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
10:43:48 oracle.sysman.emcp.EMDBCConfig updateEmomsProps
CONFIG: Updating file /path/sysman/config/emoms.properties ...
10:43:48 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
10:43:48 oracle.sysman.emcp.util.FileUtil _copyFile
10:43:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
10:43:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MAIL_SERVER_SENDER_NAME.
10:43:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter EMAIL_ADDRESS.
10:43:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MAIL_SERVER_NAME.
10:43:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
10:43:49 oracle.sysman.emcp.EMAgentConfig updateEmdProps
CONFIG: Updating file /path/sysman/config/emd.properties ...
10:43:49 oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /path/sysman/config/emd.properties.emca to /path/sysman/config/emd.properties
10:43:49 oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /path/sysman/config/emd.properties.emca.util.tmp to /path/sysman/config/emd.properties
10:43:49 oracle.sysman.emcp.EMAgentConfig updateAgentConfigFiles
CONFIG: Updating file /path/sysman/config/emd.properties ...
10:43:49 oracle.sysman.emcp.EMAgentConfig updateTargets
CONFIG: value for use102tgt: F
10:43:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter LISTENER_OH.
10:43:49 oracle.sysman.emcp.ParamsManager getListenerHome
CONFIG: LISTENER_OH not set. Using ORACLE_HOME as listener's home.
10:43:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
10:43:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
10:43:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter LISTENER.
10:43:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter LISTENER_OH.
10:43:49 oracle.sysman.emcp.ParamsManager getListenerHome
CONFIG: LISTENER_OH not set. Using ORACLE_HOME as listener's home.
10:43:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter LISTENER_OH.
10:43:49 oracle.sysman.emcp.ParamsManager getListenerHome
CONFIG: LISTENER_OH not set. Using ORACLE_HOME as listener's home.
10:43:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
10:43:50 oracle.sysman.emcp.ParamsManager getLocalListener
CONFIG: Found listener named: LISTENER
10:43:50 oracle.sysman.emcp.EMAgentConfig updateAgentConfigFiles
CONFIG: Updating file /path/sysman/emd/targets.xml ...
10:43:50 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
10:43:50 oracle.sysman.emcp.EMAgentConfig instantiateEMConfigFiles
CONFIG: Local host name: bss.com
10:43:50 oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: T localNode: null
10:43:50 oracle.sysman.emcp.util.PlatformInterface addEnvVarToList
CONFIG: Value for env var 'DISPLAY' is '', discarding the same
10:43:50 oracle.sysman.emcp.util.PlatformInterface addEnvVarToList
CONFIG: Value for env var 'TZ' is '', discarding the same
10:43:50 oracle.sysman.emcp.util.PlatformInterface addEnvVarToList
CONFIG: Value for env var 'ORACLE_HOSTNAME' is '', discarding the same
10:43:50 oracle.sysman.emcp.util.PlatformInterface getSortedEnvArray
CONFIG: New Env List: [CLASSPATH=/path/jlib/emca.jar:/path/jlib/srvm.jar:/path/jlib/srvmasm.jar:/path/jlib/emConfigInstall.jar:/path/jlib/ldapjclnt11.jar:/path/jlib/ldap.jar:/path/jlib/share.jar:/path/jlib/srvmhas.jar:/path/jlib/netcfg.jar:/path/jlib/http_client.jar:/path/lib/http_client.jar:/path/lib/xmlparserv2.jar:/path/assistants/jlib/assistantsCommon.jar:/path/sysman/jlib/emCORE.jar:/path/sysman/jlib/emagentSDK.jar:/path/oui/jlib/OraInstaller.jar:/path/oui/jlib/OraPrereq.jar:/path/inventory/prereqs/oui/OraPrereqChecks.jar:/path/oui/jlib/OraPrereqChecks.jar:, DYLD_LIBRARY_PATH=/path/lib32:/path/lib:/path/perl/lib, G_BROKEN_FILENAMES=1, HISTSIZE=1000, HOME=/home/oracle, HOSTNAME=bss-ora-dev, INPUTRC=/etc/inputrc, KDEDIR=/usr, LANG=en_US.UTF-8, LD_LIBRARY_PATH=/path/jdk/jre/lib/i386/client:/path/jdk/jre/lib/i386:/path/jdk/jre/../lib/i386:/path/lib32:/path/lib:/path/perl/lib, LESSOPEN=|/usr/bin/lesspipe.sh %s, LIBPATH=/path/lib32:/path/lib:/path/perl/lib, LOGNAME=oracle, LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:, MAIL=/var/spool/mail/oracle, NEED_EXIT_CODE=1, NLSPATH=/usr/dt/lib/nls/msg/%L/%N.cat, ORACLE_HOME=/path, ORACLE_SID=bssdevpl, PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/oracle/bin:/path/bin, PWD=/home/oracle, SHELL=/bin/bash, SHLIB_PATH=/path/lib32:/path/lib:/path/perl/lib, SHLVL=2, SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass, TERM=xterm, USER=oracle, XFILESEARCHPATH=/usr/dt/app-defaults/%L/Dt, _=/path/jdk/jre/bin/java]
10:43:50 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: /path/bin/emctl deploy dbconsole /path/bss.com_bssdevpl bss.com:3938 bss.com bssdevpl
10:43:53 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 0
10:43:53 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Execution of /path/bin/emctl deploy dbconsole /path/bss.com_bssdevpl bss.com:3938 bss.com bssdevpl completed successfully
10:43:53 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Creating shared install...
Source location: /path
Destination (shared install) : /path/bss.com_bssdevpl
DeployMode : dbconsole
Creating directories...
Setting console properties ...
Setting log and trace files locations for Console ...
Setting log and trace files locations for Agent ...
10:43:53 oracle.sysman.emcp.EMAgentConfig updateDBControlPort
CONFIG: Setting https port as: -1
10:43:53 oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /path/bss.com_bssdevpl/sysman/config/emoms.properties.emca.util.tmp to /path/bss.com_bssdevpl/sysman/config/emoms.properties
10:43:53 oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /path/bss.com_bssdevpl/sysman/config/emd.properties.emca.util.tmp to /path/bss.com_bssdevpl/sysman/config/emd.properties
10:43:53 oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /path/bss.com_bssdevpl/sysman/config/emd.properties.emca.util.tmp to /path/bss.com_bssdevpl/sysman/config/emd.properties
10:43:53 oracle.sysman.emcp.EMAgentConfig getCustomTargetName
CONFIG: targetsXML exists: /path/sysman/emd/targets.xml
10:43:53 oracle.sysman.emcp.EMAgentConfig getCustomTargetName
CONFIG: customTarget for oracle_database on node bss.com sid bssdevpl : bssdevpl
10:43:53 oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: CUSTOM_ORACLE_DB_TARGET value: bssdevpl
10:43:53 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter LISTENER.
10:43:53 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter LISTENER_OH.
10:43:53 oracle.sysman.emcp.ParamsManager getListenerHome
CONFIG: LISTENER_OH not set. Using ORACLE_HOME as listener's home.
10:43:53 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter LISTENER_OH.
10:43:53 oracle.sysman.emcp.ParamsManager getListenerHome
CONFIG: LISTENER_OH not set. Using ORACLE_HOME as listener's home.
10:43:53 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
10:43:53 oracle.sysman.emcp.ParamsManager getLocalListener
CONFIG: Found listener named: LISTENER
10:43:53 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter LISTENER_OH.
10:43:53 oracle.sysman.emcp.ParamsManager getListenerHome
CONFIG: LISTENER_OH not set. Using ORACLE_HOME as listener's home.
10:43:53 oracle.sysman.emcp.EMAgentConfig getCustomTargetName
CONFIG: targetsXML exists: /path/sysman/emd/targets.xml
10:43:53 oracle.sysman.emcp.EMAgentConfig getCustomTargetName
CONFIG: customTarget for oracle_listener on node bss.com sid null : LISTENER_bss.com
10:43:53 oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: CUSTOM_LSNR_TARGET value: LISTENER_bss.com
10:43:53 oracle.sysman.emcp.util.PlatformInterface getEnvProps
CONFIG: Returning env array from cache
10:43:53 oracle.sysman.emcp.util.PlatformInterface getSortedEnvArray
CONFIG: New Env List: [CLASSPATH=/path/jlib/emca.jar:/path/jlib/srvm.jar:/path/jlib/srvmasm.jar:/path/jlib/emConfigInstall.jar:/path/jlib/ldapjclnt11.jar:/path/jlib/ldap.jar:/path/jlib/share.jar:/path/jlib/srvmhas.jar:/path/jlib/netcfg.jar:/path/jlib/http_client.jar:/path/lib/http_client.jar:/path/lib/xmlparserv2.jar:/path/assistants/jlib/assistantsCommon.jar:/path/sysman/jlib/emCORE.jar:/path/sysman/jlib/emagentSDK.jar:/path/oui/jlib/OraInstaller.jar:/path/oui/jlib/OraPrereq.jar:/path/inventory/prereqs/oui/OraPrereqChecks.jar:/path/oui/jlib/OraPrereqChecks.jar:, DYLD_LIBRARY_PATH=/path/lib32:/path/lib:/path/perl/lib, G_BROKEN_FILENAMES=1, HISTSIZE=1000, HOME=/home/oracle, HOSTNAME=bss-ora-dev, INPUTRC=/etc/inputrc, KDEDIR=/usr, LANG=en_US.UTF-8, LD_LIBRARY_PATH=/path/lib32:/path/lib:/path/perl/lib:null, LESSOPEN=|/usr/bin/lesspipe.sh %s, LIBPATH=/path/lib32:/path/lib:/path/perl/lib, LOGNAME=oracle, LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:, MAIL=/var/spool/mail/oracle, NLSPATH=/usr/dt/lib/nls/msg/%L/%N.cat, ORACLE_HOME=/path, ORACLE_SID=bssdevpl, PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/oracle/bin:/path/bin, PERL5LIB=/path/perl/lib:/path/perl/lib/site_perl:/path/sysman/admin/scripts:/path/bin:, PWD=/home/oracle, SHELL=/bin/bash, SHLIB_PATH=/path/lib32:/path/lib:/path/perl/lib, SHLVL=2, SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass, TERM=xterm, USER=oracle, XFILESEARCHPATH=/usr/dt/app-defaults/%L/Dt, _=/path/jdk/jre/bin/java]
10:43:53 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: /path/perl/bin/perl /path/bin/targetdeploy.pl -d bssdevpl -n LISTENER_bss.com /path/bss.com_bssdevpl bss.com bssdevpl
10:43:53 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 0
10:43:53 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Execution of /path/perl/bin/perl /path/bin/targetdeploy.pl -d bssdevpl -n LISTENER_bss.com /path/bss.com_bssdevpl bss.com bssdevpl completed successfully
10:43:53 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Creating targets.xml in state directories...
Source location: /path
Destination : /path/bss.com_bssdevpl
Creating directories...
Creating targets.xml...
Done.
10:43:53 oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /path/oraInst.loc to /path/bss.com_bssdevpl/oraInst.loc
10:43:53 oracle.sysman.emcp.EMAgentConfig createAgentTimeStampFile
CONFIG: Creating agntstmp.txt file. oh: /path stateDir: /path/bss.com_bssdevpl host: bss.com
10:43:53 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
10:43:53 oracle.sysman.emcp.EMAgentConfig createAgentTimeStampFile
CONFIG: File: /path/sysman/emd/agntstmp.txt.bssdevpl does not exists
10:43:53 oracle.sysman.emcp.EMAgentConfig instantiateEMConfigFiles
CONFIG: Successfully deployed state dirs for bss.com
10:43:53 oracle.sysman.emcp.EMAgentConfig performConfiguration
CONFIG: Successfully updated agent config files
10:43:53 oracle.sysman.emcp.util.CentralAgentUtil registerWithCentralAgents
INFO: Registering target(s) with central agent(s) (this may take a while)...
10:43:53 oracle.sysman.emcp.util.PlatformInterface addEnvVarToList
CONFIG: Value for env var 'DISPLAY' is '', discarding the same
10:43:53 oracle.sysman.emcp.util.PlatformInterface addEnvVarToList
CONFIG: Value for env var 'TZ' is '', discarding the same
10:43:53 oracle.sysman.emcp.util.PlatformInterface addEnvVarToList
CONFIG: Value for env var 'ORACLE_HOSTNAME' is '', discarding the same
10:43:53 oracle.sysman.emcp.util.PlatformInterface getEnvProps
CONFIG: Returning env array from cache
10:43:53 oracle.sysman.emcp.util.PlatformInterface getSortedEnvArray
CONFIG: New Env List: [CLASSPATH=/path/jlib/emca.jar:/path/jlib/srvm.jar:/path/jlib/srvmasm.jar:/path/jlib/emConfigInstall.jar:/path/jlib/ldapjclnt11.jar:/path/jlib/ldap.jar:/path/jlib/share.jar:/path/jlib/srvmhas.jar:/path/jlib/netcfg.jar:/path/jlib/http_client.jar:/path/lib/http_client.jar:/path/lib/xmlparserv2.jar:/path/assistants/jlib/assistantsCommon.jar:/path/sysman/jlib/emCORE.jar:/path/sysman/jlib/emagentSDK.jar:/path/oui/jlib/OraInstaller.jar:/path/oui/jlib/OraPrereq.jar:/path/inventory/prereqs/oui/OraPrereqChecks.jar:/path/oui/jlib/OraPrereqChecks.jar:, DYLD_LIBRARY_PATH=/path/lib32:/path/lib:/path/perl/lib, G_BROKEN_FILENAMES=1, HISTSIZE=1000, HOME=/home/oracle, HOSTNAME=bss-ora-dev, INPUTRC=/etc/inputrc, KDEDIR=/usr, LANG=en_US.UTF-8, LD_LIBRARY_PATH=/path/jdk/jre/lib/i386/client:/path/jdk/jre/lib/i386:/path/jdk/jre/../lib/i386:/path/lib32:/path/lib:/path/perl/lib, LESSOPEN=|/usr/bin/lesspipe.sh %s, LIBPATH=/path/lib32:/path/lib:/path/perl/lib, LOGNAME=oracle, LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:, MAIL=/var/spool/mail/oracle, NEED_EXIT_CODE=1, NLSPATH=/usr/dt/lib/nls/msg/%L/%N.cat, ORACLE_HOME=/path, ORACLE_SID=bssdevpl, PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/oracle/bin:/path/bin, PWD=/home/oracle, SHELL=/bin/bash, SHLIB_PATH=/path/lib32:/path/lib:/path/perl/lib, SHLVL=2, SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass, TERM=xterm, USER=oracle, XFILESEARCHPATH=/usr/dt/app-defaults/%L/Dt, _=/path/jdk/jre/bin/java]
10:43:53 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: /path/bin/emctl config agent addcentralagent /path /path
10:43:57 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 1
10:43:57 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
0 [main] ERROR emSDK.config - Warning: one of following could not be found:/path/bin/emtgtctl or /path/bss.com_bssdevpl/bin/emtgtctl
7 [main] ERROR emSDK.config - oracle.sysman.emSDK.conf.CentralHomeAdditionException: emtgtctl could not be found in the bin directory of either the local home at /path or the central home at /path/bss.com_bssdevpl
oracle.sysman.emSDK.conf.CentralHomeAdditionException: emtgtctl could not be found in the bin directory of either the local home at /path or the central home at /path/bss.com_bssdevpl
     at oracle.sysman.emSDK.conf.TargetInstaller.addCentralAgentHome(TargetInstaller.java:1931)
     at oracle.sysman.emSDK.conf.TargetInstaller.main(TargetInstaller.java:3167)
10:43:57 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: emtgtctl could not be found in the bin directory of either the local home at /path or the central home at /path/bss.com_bssdevpl
10:43:57 oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing /path/bin/emctl config agent addcentralagent /path /path
10:43:57 oracle.sysman.emcp.util.CentralAgentUtil registerWithCentralAgents
CONFIG: Error registering with /path
10:43:57 oracle.sysman.emcp.EMAgentConfig performConfiguration
WARNING: Error registering database targets with the central agent(s).
10:43:57 oracle.sysman.emcp.EMConfig perform
SEVERE: Error configuring central management. This target will not be centrally managed
Refer to the log file at /Oracle/app/oracle/cfgtoollogs/emca/bssdevpl/emca_2010_02_10_10_25_26.log for more details.
10:43:57 oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error configuring central management. This target will not be centrally managed
     at oracle.sysman.emcp.EMAgentConfig.performConfiguration(EMAgentConfig.java:1303)
     at oracle.sysman.emcp.EMAgentConfig.invoke(EMAgentConfig.java:239)
     at oracle.sysman.emcp.EMAgentConfig.invoke(EMAgentConfig.java:217)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:225)
     at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:534)
     at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1214)
     at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:518)
     at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:467)

Profit Center Disabled while Creating Material with Custom Trnx

Hi all,
I am trying to extend material to a another Plant with Custom trnx to create material.
I am able to create / extend material for some plants. But, for few plants, I am getting error to input data for 'Profit' Center' field in 'Sales:General / Plant' view' as 'MARC-PRCTR' is not ready for input. The field is in disable (grayed out) mode. But, for other materials, I am able to extend the material successfully.
The Profit center value is same which used for previous materials, extended successfully. Except the target Plant , all the details are same.
Coudl some one can help on this.
Regards
SP

this is most probably because of missing customizing of field selection in OMS9 transaction

SC description while creating Development Configuration

Hi all
I am using NWDS and trying to understand more this tool and this kind of developing. I am looking at Archive SC including while creating the Development Configuration. They are indicated with a sort of ID not completely self explaining and I don't know which of them I have to include because I don't know what they do. The question is: is there a description of SC and their functionality? And does anybody know why if I add an Archive SC later, I have to mandatory change the name of SC even if I included it while creating Development Configuration, was left its Archive name?
Thanks
Gabriele

Hi ,
This exception is raised when a connection or communications failure occurs.
This exception reports all failures and system problems on the remote machine . so look like there is some porblem with your system connection .
Could you please check in your host file , is that entry for system is maintain or not ?
Hope this help .
Regards,
Dinesh

Error while creating SOURCE SYSTEM

Hi All,
I have a problem while creating Source System to a Solman syatem configured with BW content. I have configured few some source systems already in the same Solman System.The system shows the following error, previous to this i get the message a "generating connection to the source system"
<b>Error in source system RXX_100
Message no. RSAR502
Diagnosis
With Remote Function Call to system RXX_100 error Screen output without connection to user. ccurred.
Procedure
Remove the cause of the error.</b>
Kindly provide me suggestions and DOCS related to the same.
Suitable points will be awarded for replies.
Expecting your kind reply,
Vineeth

Hi ,
In SCC4 the source client should not set as production when creating the source system connection between two systems.Please check below SAP note
973555 - System must be open for creating/connecting source systems
Thanks,
Shanaka

Buttons disabled while creating JCO- SLD configured in solman

Similar Messages

Maybe you are looking for