Buttons/Images/Importing Images

Any suggestions as to how I can use an image as a button? I have successfully imported my image, got it displaying fine but PL/SQL is unavailable for it. Why can't I do a 'When-Image-Pressed' on an imported image. I also tried using the image item but do not know how to set the source. Don't want to use an iconic button if I can help it.
Ben

Here's a bit of code that loads a png with transparency, smooths it, and places it on stage.
var a:Loader = new Loader();
a.load(new URLRequest("spider.png"));
a.contentLoaderInfo.addEventListener(Event.COMPLETE, done);
function done(e:Event){
    var bit:Bitmap = e.target.content;
    if(bit != null){
        bit.smoothing = true;
    addChild(bit);

Similar Messages

  • LR4.4 - blacked out boxes when importing images from upgraded PSE10 catalogue [was: Lightroom 4]

    I have been using photoshop elements 10 for over a year and decided it was time to upgrade to Lightroom for my photo workflow as I am doing more paid photography work.  I purchased and received my boxed full version of Lightroom 4 from B & H photovideo on Friday.  I installed it then went on-line and updated it with the download of lightroom 4.4.  Then I opened lightroom 4.4 for the first time and went to files and selected upgrade my photoshope elemnts catalog to lightroom.  Once that was completed I then tried to import images to lightroom 4 to work with them and all I get are blacked out or greyed out boxes in my slide strip at the bottom of the desktop window in import mode. When I point to each box it shows a file name but will not show the image.  I have spent all kinds of time reading and watching tutorials on opening images, importing images and catalogs  and I am FRUSTRATED....  Would really like to talk to someone to get this figured out.  I never thought it would be this difficult to use this program... HELP Please...

    I would like to THANK YOU for your assistance in my situation.  I followed your suggestion and went into my monitor settings and did a manual reset to the default profile and went back to Lr and the images started popping up one at a time until all 7000+ were visable.  Just for the record, I am using Canon 1Ds Mark II, on a Quadcor AMD unlocked FX processor running Windows 7. I shoot in RAW and convert to JPG.  It would have been the last thing for me to look at on my monitor settings as all the other programs on my computer run without a glitch.  Thanks again for your help... Cheers!

  • Difference between importing images from iphoto via drag & drop vs 'media' button

    Hi (long time reader of this community, but my first post),
    i'm creating a huge document (approximately 200 pages) in Pages (5.0.1, Using Maverick on a 27 inch iMac).
    In the new version of Pages the "Media" button only produces small images that makes it difficult for me to choose which photo i want.
    Is there a difference between importing images from iphoto drag & drop vs 'media' button.
    Or is it better to just drag and drop the original jpegs (which i also have in a folder).
    Is Pages the best program to use for this type of project? it is a profolio with about 4 photos, text, text boxes etc on each of the 200+ pages.
    any help much appreciated.

    Pages 4.3 might be up to the job. I very much doubt Page 5.0.1 is.  It lacks more than 90 features of its predecessor and is very buggy to boot. You probably have an iwork09 folder in your Applications folder. I suggest you trash Pages 5.0.1 and use Pages 4.3 until Apple makestheir new "Eddie Cue" ready for prime time (if, that is, they ever do).

  • HT1349 Just popped a cd into my IMac (10.68) in order to look at some very important images I just had scanned. The computer wont recognize the cd, nor will it eject it. any suggestions? (besides shaking it and throwing it across the room :-)

    Just popped a cd with important images into my imac. Computer wont recognize it nor will it eject it.
    any suggestions?

    Restart the computer with the mouse button held down.  This will force an optical drive eject.

  • Where is it best to store all imported images in PSE? I've recently changed it and got myself in a complete mess.

    Where is the best location to store imported images in PSE? And if I cannot locate files will I be able to find them after changling the stored location?

    lets use tb31... I just don't remember V7 all that well
    Now when you receive a mail with remote images do you see the options button in the attached image

  • Real time importing images

    I am working on the project that I need to import images in real time. I mean my program have to get a picture per second.I am very new with LabView and don't know how can I do that. can anyone help me please?
    Thank you in advance.

    zeinab1 wrote:
    There is usb camera and I mean by real time is really fast like one picture per second.  I am good at programing but no experience with LabView. Do you think can I code separately in C or C++ and kind of using in LabView.
    I have a USB camera mounted on my monitor "looking at me".  I fired up MAX and tried to determine how quickly I could "snap" (take a single image) pictures.  Since I was manually "pushing the button", it was tricky to tell, but it seemed to be possible to take 1/sec.  I then tried "grab", which takes videos -- this was (of course) much easier, and considerably faster (I'd guess tens of frames/second).
    I have the Vision module installed, and am using IMAQdx for getting the images.  LabVIEW isn't bad in capturing images, but there's not a lot of hand-holding or extensive documentation -- I think it could be a real challenge to "do it yourself" with no LabVIEW experience.
    To even see if this is a viable approach for you, see if you can repeat what I did -- plug in your USB camera, open NI-MAX, and see if the camera shows up.  If it doesn't, stop -- you don't have the LabVIEW software appropriate to do this installed.
    BS

  • Can't import images using iCloud on iPad and Mac

    Yes. I have followed the "easy" instructions of the Apple site for setting my up my icloud account and sign in with both devices. Yes I have seen every imaginable youtube video of how to's and followed the steps.  I am connected to the internet, signed in with icloud in both devices, ticked automatic upload of photos, photo sharing, etc. Now where do I find the images? are they automatically imported NO and if I enter icloud from the internet can I see my images NO!
    and if i followed the easy steps to import them using iphoto, it just says something stupid like "import the photos" yeah...how???!!

    I have an Ipad2 and a Macbook pro, latest software versions downloaded today
    Which software versions exactly? "latest" may depend on your hardware. MacOS X10.9.1)? iPhoto 9.5.1?.
    Othe fact is when i go to the icloud.com the photos are not there either. I made an album on the ipad and "shared" manually the photos for icloud and nope, it doesnt work.
    How did you share the album?
    You can share to a shared Photo Stream and publish that stream as a public webpage on your iCloud webpage. Is taht what you have done? Then you need to use exactly the url, that is given, when you publish the webpage. It is not linked on your iCloud page.
    If I wanted download manually the photos to iphoto I cant I cant because the icloud icon doesnt appear in the left menu of iphoto like the one you are showing, it doesnt display either a shared button like the one you have in your screen and it doesnt explain at all how to import images.
    Let's compare the settings on your Mac:
    In System Preferences - you say you are signed into iCloud, o.k.
    Did you enable the options for "Photos"?
    Check, if bot "My Photo Stream" and "Photo Sharing" are enabled.
    Otherwise iPhoto will not show the iCloud options.
    In iPhoto you should see the iCloud panel I posted as a Tab in the iPhoto Preferences panel.
    (My screenshots are done in iPhoto 9.5.1 and MacOS X 10.9.1)
    iCloud: Using and troubleshooting Shared Photo Streams
    Mac with OS X Mavericks v10.9 or later and either iPhoto 9.5 or Aperture 3.5

  • Converting 180 imported images in AE CC to image sequences that reside in same folder as stills.

    I have 180 imported stills in a composition. I have corresponding image sequences that I want to convert each still to. The stills are named "x-00001.jpg", and the other parts of the image sequence are in the same directory. How do I get AE CC to make the leap to find the rest of each image sequence aside from manually using "Replace Footage" with each image to check the image sequence box?    

    Your workflow is flawed when you put your placeholder images and your image sequences in the same folder. Each image sequence should be in a separate folder and should be imported as an image sequence. The frame rate of the imported image sequences is set in Preferences before an image sequence is imported or changed with File>Interpret Footage.
    If your placeholder is a still image and you have an image sequence in a different folder you can use the Replace Footage command and it will bring replace a still with an image sequence if you make sure to check the image sequence button before you press Open.
    You can also convert your image sequences to Movies using QuickTime and easily wrap them in a .mov container. This eliminates the necessity of checking the image sequence box when replacing footage.
    Writing a script to do this would require that you either pause the script to choose the folder with the image sequence or that you script every folder and the placeholder so it would be easier just to go through the composition and replace footage.

  • CS6 default image import is different than CS5

    The default image import option for CS5 was "Crop" now with CS6 it's "Bounding Box"
    Any ideas on how to change the default so I don't have to keep using the dialogue box?
    Thanks

    I just figured it out.
    I was actually replacing an image and not importing. And I was using the link button in the links window, not the Command D shortcut.
    The reason I used the term "image import" in the title of my question is that the dialogue box used when replacing an image says "Show Import Options". This is where I found the Crop option and this is the procedure that would not "stick".
    I remembered that I could use Command D also to replace an image and that since this is the Place keystroke then the window would give me the same option. I chose "Crop" in the dialogue box, successfully replaced the image, closed InDesign, opened InDesign, used the link button in the links window to replace my image and Voila! it stuck.
    So, just in case somebody else asks, to make it stick you MUST use the Command D shortcut or the Place menu item. Using the link button in the links window will not make your choice stick.
    Thanks for your help Peter, I can see now why you were pulling your hair out on this, you must have been assuming I was using the Place menu item.

  • I cannot view images imported from nikon d4

    i cannot view images imported from nikon d4.
    I have just upgraded to the most current version of aperture and when I import images from my qxd card it looks like it is importing but no images show up.

    So the images show up in the Import pane of Aperture but after you press the Import button they do not show in the project you are importing into?
    Does this happen for both Raw and JPG images?

  • Aperture 3.0.1 Problem with Importing Images

    The problem I am experiencing with Aperture 3 is that often when I am trying to import images to a project, the images "do not show up" in the import window. In other words, Aperture doesn't "see" the images I am trying to import.
    Here's what I mean, I might have photos on a CF card or on a hard drive which I would be trying to add/import into a project. Sometimes but not all the time, when I select the folder or location where the files are that I am trying to import, no files show up! These are just regular JPEG files. I know they are there because if I look with OS X's Finder, the images are all there. As well, sometimes if I quit Aperture and restart it all over again, the images that I want to import now show up in the import window.
    This problem doesn't change either whether I click on the "do not import duplicate" box or not. Although as a side note, this "do not import duplicate" function doesn't seem to be reliable either.
    Does anyone have any suggestions regarding what I can do to fix this? Can I "reinstall" Aperture? How do I do this? Is this something I can fix by rebuilding the library?

    I didn't even realize that I too had this issue until I came upon this thread. I went into my Import window, selected my hard drive and only the folder structure would show - no images corresponding to those within the folders would appear in the window above.
    Odd, though, all I did was uncheck the 'Do not import duplicates' box and suddenly the images now appear, and continue to appear after a relaunch of Aperture. I've since rechecked the duplicates box but the images still appear.
    I don't know if it's related to the initial toggling of the duplicates button or not. Nor do I know if the problem will appear sometime later, but I do know it was/is an issue.

  • Buttons w custom image not showing up after export

    Hi,
    I have alot of buttons created with a custom image and all function fine within CP6, but after export to .exe module the buttons loose the image and appear as white squares. They still function correctly just have lost the image. Any ideas as to why?
    Thanks!

    Hello,
    Welcome to Adobe Forums.
    I tested this same workflow at my end and it worked for me, I used "Image button" instead of "Transparent button" and imported the image, screenshots :
    Hope it helps !!
    Thanks,
    Vikram

  • Importing images into projects

    can any1 please tell me how to import images into my netbeans IDE projects?this should be such that the jar file that is created displays them correctly- i am having this said problem with .jar files.
    plz help!!

    i use a function createImageIcon(ImageIcon icon) wfor which i provide a definition.
    the definition is as given in the java tutorial as follows
    protected static ImageIcon createImageIcon(String path)
    java.net.URL imgURL = LabelDemo.class.getResource(path);
    if (imgURL != null) {
    return new ImageIcon(imgURL, description);
    } else {
    System.err.println("Couldn't find file: " + path);
    return null;
    the program executes perfectly from the IDE when i use the run finction of F6 key. I use netbeans IDE. the images are kept in a folder named images in the 'src' folder of the project. this folder is used to store source files by the IDE. The main thing is i put the images in such a place that the program executes perfectly without errors from the IDE. using the IDE which shows the contents of a .jar file, i verified that the images are indeedd present in the JAR file. however i still continue to get the same error. infact after add ing the images folder and running a 'clean and build' operation , the only difference is that the jar file, which still doesnt display images on buttons, labels etc has increased in size confirming tht the images have been added- i also verified this from the command line.
    but the same problem persists.

  • Importing images from Canon 1D mkIII

    Please can you help me to set up Lightroom to import Canon 1d mark 3. When I import these images, Lightroom creates a poorer image with default settings, with less colour and less brightness, and although the images look fine in camera, and on computer before importing, the exposure has to be increased on all images, however, my 10D images imported add 50 to brightness, and 25 to contrast as default. I have never typed these settings in, and they are identical on both my windows, and mac computers. Can you tell me how to adjust these please so that when I import images they can look the same without the need to change each image.

    Change only those sliders whose effect you want to override, tehn Alt/Option click the Reset button in Develop - it changes to Set Default.
    Alternatively, create a new Develop preset with those slider values, then apply it upon import.

  • DVD Studio 4 Import Image Errors

    I am trying to import some JPG files into a DVD Studio 4 project (I've done this many times in the past without issue), but I am running into a problem. Not matter how many images I try to import DSP only imports the 1st image and says the rest of the images are not compatible. Then I have to close DSP, create a new project, and I have the same problem. Only 1 image imports. I've tried reinstall DSP to no avail. Anybody else our there experience this problem?

    I was having the exact same problem. PSD files that used to drag into to DVD Studio Pro without any problem are getting an "Incompatible Format" error.
    However, I do seem to be able to import the same images (after multiple attempts) if I use the Import Asset button or File menu item.
    Once imported, in the DSP assets window, the file Type is listed as "QuickTime Picture" instead of a PSD Document, and the button layers no longer work in DSP.
    Interesting that this seems to be a recent problem...could this have something to do with a recent software update?
    Message was edited by: bfcat

Maybe you are looking for

  • The core audio for Logic 8 has stopped working.

    I was successfully running Logic 8, Protools LE and Cubase on a MacPro with Leopard (10.5.5) and a MOTU traveler interface. I loaded on the Ignition Pack bundled with Protools LE (Mbox mini), including Melodyne/Reason/Live 6. This then stopped me ope

  • How to RECORD more than ONE TRACK at a time ? ? ?

    I have looked, read and tried - but cannot enable more than one track at a time... How do you do it? I am using a Lexicon Omega USB interface. With two mics plugged in to it, I am able to assign MIC 1 to a track, and MIC 2 onto a different track. How

  • What's wrong with my hyperlinks from Excel?

    I'm creating a table of documents in Excel 2010, with hyperlinks in cells to the documents. I need to keep the documents as read-only, so I've pdf'd them, but now opening each one takes about 2 minutes. During the process I receive the message: 'Micr

  • Skype Emoticons? Is this real or virus?

    Hello There, For some time now I have been trying to get rid of this Skype emoticons on the right of my screen and also it keeps popping up this message under my name to ask others to download it: **** PLEASE DO NOT DOWNLOAD THIS URL, JUST IN CASE IT

  • Writing Error Messages to a file

    we want to write an error message to a file and are wondering what steps to take in doing so... thanks in advance