BW BEx 3.5 Add-On Out of Maintenance Date

Hello Everyone.
I am attempting to locate the out of maintenance date of BW BEx 3.5 Add-On with GUI 7.20.
Would someone have this information?
Cheers
Uday

Dear Uday,
Refer to [service.sap.com/pam|http://service.sap.com/pam] . Notice that the end of extend mainstream for netwever 04 is scheduled to 31.03.2013. In this case the Bex Analyzer tools should be available until then.

Similar Messages

Protected: value to add was out of range

i have problem
it's notification:
''Protected: value to add was out of range
Parameter name: value"
My OS is 8.1
Please help me

Hi,
To enable us to help you better, you need to provide as many details as you can about the problem you are experiencing.
Also, you can capture a screenshot or take a photo on the error appeared and share with us.
Then, upload the screenshot to SkyDrive:
http://skydrive.com
Regards,
Kelvin hsu
TechNet Community Support

Need help Creating a translation pattern that adds dial out digits to incoming calls

I came across an article yesterday and it showed the steps how to fix Missed Call/Received Call numbers so that you can dial them from the menu correctly (auto-add a 9, etc.)?
I tried it this morning and came up with this translation pattern:
voice translation-rule 6
rule 1 /^201\(.*\)/ /8\1/
rule 2 /\(..........\)/ /81\1/
voice translation-profile filter_Incoming
translate calling 6
This translation pattern rule 1 adds the dial out character 8 and strips 201 for local calls. Rule 2 adds dial out character 8 and adds 1 for long distance. The purpose of this translation rule is when the ephone receives the phone call the characters 8 and 1 are added so when you quickly need to redial you do not have to edit the number and add 8 for each call.
I tested the translation-rule:
ROUTER-2911#test voice translation-rule 6 9082121231
Matched with rule 2
Original number: 9082121231     Translated number: 819082121231
Original number type: none      Translated number type: none
Original number plan: none      Translated number plan: none
ROUTER-2911#test voice translation-rule 6 2019121231
Matched with rule 1
Original number: 2019121231     Translated number: 89121231
Original number type: none      Translated number type: none
Original number plan: none      Translated number plan: none
ROUTER-2911#
Issue is I am not sure with my inbound call leg if it can even work. We dial out through the SIP Trunk and the incoming is translated to the AutoAttendant on Cisco Unity Express.
voice translation-rule 1
rule 1 /2015552100/ /2003/
voice translation-profile CUE_Voicemail/AutoAttendant
translate called 1
dial-peer voice 9 voip
description **Incoming Call from SIP Trunk**
translation-profile incoming CUE_Voicemail/AutoAttendant
call-block translation-profile incoming BLOCKED-INCOMING
call-block disconnect-cause incoming call-reject
session protocol sipv2
session target dns:nd01-04.fs.SIPPROVIDER.net
incoming called-number .%
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
Can what I am trying to do be done with my current setup?

Hi patldmart012,
The dial-peer 9 that you have attached will not be affected by following config
voice translation-rule 6
rule 1 /^201\(.*\)/ /8\1/
rule 2 /\(..........\)/ /81\1/
voice translation-profile filter_Incoming
translate calling 6
Because you have not applied the translation profile "filter_incoming" on the dial-peer.
Could you please provide the exact call flow?
Along with that, If you are facing issue with calls on SIP Trunk, please collect following debugs in a logging buffer and attach the file. I will analyse it and will get back to you.
debug voip ccapi inout
debug ccsip message
debug voice translation
Debug h225 asn1 (If H323 involved)
Debug h245 asn1 (If H323 involved)
Debug MGCP Packets (If MGCP involved)
Also provide the running config of the GW.
These are verbose debugs, so please collect them in the following manner:
Router(config)# service sequence
Router(config)# service timestamps debug datetime msec
Router(config)# logging buffered 30000000 7
Router(config)# no logging con
Router(config)# no logging mon
Router# Clear log
Router# term no mon
<Enable debugs, then wait for issue to occur.>
Router# term len 0
<Enable session capture to txt file in terminal program.>
Router# Undebug all
Router# sh log
Once i have the logs, i will analyse it and will get back to you.
Regards,
Mudit Mathur

How to add an out-of-box JMS modules?

Hi,
I am using WebLogic Server 10.3. For my project, I need to add some out-of-box JMS modules so that there is no need to ask the administrators to create and configure them. I wonder how I can achieve this. Is it good enough just to make changes on the config/config.xml and add a corresponding *-jms.xml?
Thank you,
Yang

Here's a more sophisticated version of the script Kats supplied. It is a bit more flexible, and works around issues that can arise if too many changes are attempted within the same edit session.
# Sample WLST code for creating a simple WebLogic JMS
# configuration using WLST.
# This script sets up two JMS servers on the same
# WebLogic server, each with a queue and a topic.
import sys
from java.lang import System
# A method for finding an mbean.
# It uses "cd()" rather than getMBean() as "cd()" works in more cases.
def findMBean(path):
    savePWD=pwd()
    try:
        cd(path)
        value=cmo
        cd(savePWD)
        return value
    except:
        print ' --- Please ignore the previous *No stack trace available.* message.'
        cd(savePWD)
        return None
# A method for creating a JMS server.
def findOrCreateJMSServer(serverMBean, jmsServerName):
    jmsServerMBean = findMBean('JMSServers/'+jmsServerName)
    if jmsServerMBean is not None:
        print ' --- JMS Server '+jmsServerName+' already exists.'
        return jmsServerMBean
    startEdit()
    jmsServerMBean = create(jmsServerName,'JMSServer')
    jmsServerMBean.addTarget(serverMBean)
    save()
    activate(block="true")
    print ' --- JMS Server '+jmsServerName+' created.'
    return jmsServerMBean
# A method for creating a JMS module for hosting JMS config,
# also creates a subdeployment named 'TheOne' for the JMS server.
# The module target is set to be the same target that's used
# for the passed in JMS server.
def findOrCreateJMSModule(jmsServerMBean, moduleName):
    jmsResource = findMBean('JMSSystemResources/'+moduleName)
    if jmsResource is not None:
        print ' --- Module '+moduleName+' already exists.'
        return jmsResource
    startEdit()
    jmsResource = create(moduleName,'JMSSystemResource')
    jmsResource.addTarget(jmsServerMBean.getTarget())
    subD = jmsResource.createSubDeployment('TheOne')
    subD.addTarget(jmsServerMBean)
    save()
    activate(block="true")
    print ' --- Module '+moduleName+' created.'
    return jmsResource
# A method for creating a JMS destination.   Pass 'Queue' or 'Topic'
# for destType. This method assumes subdeployment named 'TheOne'.
def findOrCreateJMSDest(destType, jmsModule, destName, destJNDIName):
    # see if dest already exists
    moduleName=jmsModule.getName()
    longname='JMSSystemResources/'+moduleName+'/JMSResource/'+moduleName
    if (destType == 'Queue'):
      longname+='/Queues/'+destName
    elif (destType == 'Topic'):
      longname+='/Topics/'+destName
    else:
      raise Exception('Unknown dest type '+destType)
    jmsDest = findMBean(longname)
    if jmsDest is not None:
      print ' --- Destination '+destName+' already exists.'
      return jmsDest
    # dest does not exist, create it
    startEdit()
    if (destType == 'Queue'):
      jmsDest = jmsModule.getJMSResource().createQueue(destName)
    else:
      jmsDest = jmsModule.getJMSResource().createTopic(destName)
    jmsDest.setJNDIName(destJNDIName)
    jmsDest.setSubDeploymentName('TheOne')
    save()
    activate(block="true")
    print ' --- Destination '+destName+' created.'
    return jmsDest
# Connect to a WebLogic Admin Server. When username, password
# and URL are not passed as arguments, connect will prompt
# for these values.
#connect('system','mypassword','t3://mymachine:7001')
connect()
edit() # Navigate to the root of the config MBean tree.
print ' --- Enter the name of the WLS server that will host the JMS servers.'
print ' --- Choices: ---'
ls('Servers')
print ' ----------------'
print ' --- --> ',
wlServerName=sys.stdin.readline().strip()
svMBean=findMBean("Servers/"+wlServerName)
if svMBean is None:
    print ' --- WebLogic server '+wlServerName+' not found.'
    stopExecution(' --- Cannot find the WebLogic myserver '+wlServerName)
try:
      jmsServerMBean = findOrCreateJMSServer(svMBean, 'MyJMSServer')
      jmsModule = findOrCreateJMSModule(jmsServerMBean, 'MyJMSModule')
      findOrCreateJMSDest('Queue', jmsModule, 'MyQueue', 'MyQueue')
      findOrCreateJMSDest('Topic', jmsModule, 'MyTopic', 'MyTopic')
    print ' --- Configuration complete.'
except:
    dumpStack()
    print ' --- Error, admin server log may contain details!!!'
    stopEdit('y')

Query output to have Day out of the Date

Hi,
I have developed a BEx Query with 0CALDAY in Rows and few key figures in the columns.
My BEx Query output needs to be just Day out of the Date. So if Calender Day is 26.03.2009 then in the query result I need to display '26' only.
Can you please let me know how this could be possible?
Thanks,
Amogh.

Amogh,
Strange requirement!!!!!
It is feasible via Modelling i.e
1. create new Z infobject say Zday.
2. Add it ur data target. Delete the data and reload the data.
3. Map Ocalday to this object in Transforamtion and put below code
Result = SOURCE_FIELDS-CALDAY+6(2).
4. Include Zday in Bex query.

How to add one day to a Date?

Hi,
What is the simplest way to daa one day to a Date object?
Thanks.
Pengyou

You use a database query just to add one day
to a Date object? I wouldn't call that the "simplest"
way at all.I was going to suggest firing off an email to the naval observatory and having them carry out the calculation, emailing the result back (maybe using JMS, not sure - web service possibly?) but the OP's way is simpler.

Add 21 days to a date field in JSP

Hi.
How can I add 21 days to a String field containing a date value in JSP. I managed to get the string field without problem with the following codes :
java.text.SimpleDateFormat formatdate = new java.text.SimpleDateFormat("dd-MMM-yy");
java.util.Date currentTime_1 = new java.util.Date();
String bDate = formatdate.format(currentTime_1);
I would like to add 21 days to the field bDate.
Please advice.
Thanks.

As far as I know we cannot manipulate on the formatted date i.e. on a string value. but you can add/deduct days from a date and then format
it to get same result. you can try this out
java.text.SimpleDateFormat formatdate = new java.text.SimpleDateFormat("dd-MMM-yy");
java.util.Date currentTime_1 = new java.util.Date();
Calendar cal = Calendar.getInstance();
cal.setTime(currentTime_1);
cal.add(Calendar.DATE,21);
String bDate = formatdate.format(cal.getTime());
System.out.println("formatted date "+bDate);
-Nagasree

How to create a new table based out of old data rows

Hi All,
How to create a new table based out of old data rows. Also how can we find out the DBF for different users in a database?
Saqib

Not very clear what you need. I'll try to interpret...
How to create a new table based out of old data rowsIf this means how to create a table from an existing one, then you can do :
SQL> create table <new table> as select * from <old table>;
if you need a subset of rows you can add a where clause.
how can we find out the DBF for different users in a database?Here I need some more clarification. What do you mean exactly ?

Issues with using Outer join in Data Template

Hi all,
this is my data in two tables .
Table Ronny1
colA colB
1 u
2 v
3 x
Table Ronny2
colC colD
1 q
2 r
This is my data template
<dataTemplate name="MGF" dataSourceRef="Source1">
     <dataQuery>
          <sqlStatement name="Q1" dataSourceRef="Source1">
               <![CDATA[select C, D from Ronny2]]>
          </sqlStatement>
          <sqlStatement name="Q2" dataSourceRef="Source2">
               <![CDATA[select A , B from lokesh1 where A = :C]]>
          </sqlStatement>
     </dataQuery>
     <dataStructure>
          <group name="G1" source="Q1">
               <group name="G2" source="Q2">
                    <element name="A" value="A"/>
                    <element name="B" value="B"/>
               </group>
          </group>
     </dataStructure>
</dataTemplate>
Now this would give me result as
A B
1 u
2 v
however my requirement is this
A B
1 u
2 v
3 x
that is, i want to display all the rows of table Ronny1 and matching rows from table Ronny2. I tried modifiying my second sql as
<![CDATA[select A , B from lokesh1 where A = :C (+)]]> ( using a outer join)
but this does give me correct data and comes back with the cartesion product.
Can anyone please answer this for me that how can we use the outer join in data templaes.
Thanks
Ronny

hey vetsrini,
sorry for the confusion here,
actually i want to display all the rows from table Ronny1 and i am also pulling in the matching rows from table Ronny2 and my data structure looks as ( pulling in column D from table Ronny2)
<dataStructure>
<group name="G1" source="Q1">
<group name="G2" source="Q2">
<element name="A" value="A"/>
<element name="B" value="B"/>
<element name="D" value="D"/>
</group>
</group>
</dataStructure>
and this is what i want the output to be
A B D
1 u q
2 v r
3 x
Hence the row where A <> C the data in the D column will be null, same as in the case of outer join.
any suggestions
Thx
Ronny

How do you add a custom label to dates in contacts.....

How do you add a custom label to dates in contacts- I have multiple birthdays in contact group and want to change label through customise to add additional birthday- unless another way to add second birthday to contacts and identify each one?????? or way to link contacts with same address phone number etc but id birthdays?????

You have some contacts with more than one birthday?
To add a custom label for a date, select Edit for an existing contact. Select Add Field. Select Date. Scroll up with the Info window above the date selection and select Other for the new date selection. Select Add Custom Label and then select this label for the new date field for the contact.
As far as linking dates with multiple contacts, the answer is no to that.

How do i find out the tables (data)effected in a schema after a particular time stamp

how do i find out the tables (data not structure)effected in a schema after a particular time stamp?
pls email in [email protected]

You can't do that. That would be a real security risc.
/KAj

How to find out the "manufacture date"?

Hello!
Can you tell me how to find out the manufacture date of my Satellite A110-334 with the serial "SY6224123K"?
I need this information for my insurance!
I found only this link for HDD`s: http://www.storage.toshiba.eu/index_manual.php?pid=220&sid=536&la=en
But there is no "S" on the first digit!??
So it is maybe "Y6" which can be November 2006! Is this right?
Thank you!
===========
This is the information on the link above:
How to encode a Toshiba Hard Disk Drive Serial Number?
The Toshiba serial number (S/N) includes details of the date of manufacture. The first digit of the serial number indicates the Month of manufacture and the 2nd digit indicates the Year.
Example:
M Y x x x x x x x
M = Month
Y = Year
The month digit goes from 1, for January, through to 9, for September, and then X, Y and Z, for October, November and December.
Examples:
2 8 1 7 0 0 0 1 A
2 = February
8 = 1998
3 0 5 4 4 3 0 6 T
3 = March
0 = 2000
X 9 D 7 8 3 3 1 T
X = October
9 = 1999
The remaining digits contain information about factory and production line, and some digits are reserved for a continuously running serial number.

Hello
Try with http://gedb.toshiba.com/
Let me know if you find info you need.

How to find out the Hire date of an employee?

Hi All
What is effective date, Latest start date and other date fields which are are used when we create a new employee?
What is the difference between hire date and joining date?
How to find out the Hire date and joining date of an employee?
Regards
Rahman

The effective dates are related to date tracking. The effective start date shows when this version of the record became effective.
The Hire Date, or Latest Satrt Date shows the date on which the employee was last hired. If he was hired before from 01/01/01 to 31/12/01, then left but was hired again from 01/01/07, the Latest Hired Date would be 01/01/07 and the First Hired Date would be 01/01/01.
When using Oracle HR, datetracking allows you to either correct data (because it was wrong or incomplete), or update it (because a time effective change took place e.g. got married).
The[b] effective dates show when a record was updated. So, if an update was made on 07/02/07, and the update datetrack option was used, the current record would have its effective end date set to 06/02/07 (the day before the update) and a new version would be created with the updates and an effective start date of 07/02/07.
Hope this helps.

How to find out the Release date & Release code of PO's ?

Dear All,
Is there any standard reports available to find out the Release date & Release codes of PO's which are already released & the PO's which are pending for release ?
Regards,

HI All,
Thanks a lot for your response.
In ME2N,ME2M etc..I have to select each single PO line item & then have to go to Header Changes to find out this info.
So, Is it possible to find out the release codes/release date of all the PO's in a single shot?
Hope my query is clear.
Thanks & Regards,

My Iphone is deactivate, I have photos with out back up, How can I open with out loosing my data.

My Iphone is deactivate, I have photos with out back up, How can I open with out loosing my data.

Aussienana wrote:
OK, so I went and explored what this site said about Mackeeper. But before I delete it can you tell me:
If we don't need anti virus program and if the one that came with the machine is supposed to do the job then what does that say about the viruses that Mackeeper says it found? Were they not there and the program made them up? Or were they there and Apple didn't deal with them?
Thanks for all feedback.
They were not there and MacKeeper made them up. Delete it completely. I have seen it cripple people's Macs.
Uninstall MacKeeper
Pete

BW BEx 3.5 Add-On Out of Maintenance Date

Similar Messages

Maybe you are looking for