BW Role Transport not appearing

Hi there mates,
I went to PFCG, clicked on my role ' FINANCE '
Then hit the Truck Button, where I created a Transport Request.
However, when I went to SE09, I don`t seem to see my Request.
Please advice

dear John mate,
make sure you mark 'customizing requests' in se09/se10, in next screen, try to expand your client number->'Customizing' ...
.. The role is entered in a Customizing transport request (display using transaction SE10)...
SE09 can be used also.
hope this helps.

Similar Messages

New Role does not appear in home page after assigned to a user

Hi there!
I'm new at SAP Portals.
I've created a role and assigned it to an user, but the corresponding tab does not appear in home page.
I've already changed permitions to a group that is assigned to the user.
I've seen in some posts that the role's property "Entry point" should have value "Yes", but mine is set to "No". Meanwhile, I can't change it. When I open the role and press button "Properties" nothing happens. The only way I can check role's properties is through "Delta Link tracer", but there I can't change them.
Can you help me, make the new tab (corresponding to role) happear in home page menu?
Thanks and best regards,
Vasco Brandã

Hi,
to track down you problem, you click on "properties", but you can't see the properties? They won't get loaded and therefor, you can't edit the property?
What's your portal version + SPS, which browser are you using + version (IE, FF) and how do you access the portal? IP, FQDN? Are you getting any error message in the browser?
What profile is assigned to your user? What kind of roles are you trying to modify? A new one, or a SAP pre-delivered portal role?
br,
Tobias

Role info not appearing once role assignment request is submitted from UI

Hi Everyone,
We have a strange problem in our project in IDM 7.2 SP8 where IDM role concept is used which contains privileges (could be role/profile) of backend systems.
Usually when ever a role (i.e IDM role) assignment request is submitted from UI, the activity with the associated info (like user details, role details, audit ID) should be stored in MXI_LINK table from where the info will be fetched and used in next stages of the processing
Even though the information is getting available for most of the cases for all users but some times for few users once the role assignment request is initiated from UI there is no info is getting available in MXI_LINK table corresponding to this activity which is strange.
Because of this problem even though user submits role assignment request no role info getting passed to IDM, set to pending state for the user which is getting meaning of user not submitted any role assignment request at all.
Can any one suggest what are the things that gets involved between these two steps and any troubleshooting hints are highly appreciable.
Regards,
Venkata Bavirisetty

Is this a situation you recreate at will? In other words, is it always happening on the same users? If so, you could put a trace on that user's account then try to add the role and see what that trace log shows. Additionally, you could just follow the links in the chain of the various tasks that kick off when you do a role assignment and check each task / job's job log and see what that tells you. There's got to be an error somewhere along the way that's preventing this from executing properly.

Set role does not appear to be working

Below, I've listed two blocks of code. The first block executes just fine. The second block throws an exception on the last line. The error returned from the server is "ORA-04043: object PERSON_VIEW does not exist". The only difference between the two blocks of code is how they log in. The first block logs in as a user with more rights. The second block logs in as a user with very little rights, but obtains more rights using the "set role" statement. I used SQL Plus to log in manually as the second user, executed the "set role" statement, and had no problem describing PERSON_VIEW. What am I doing wrong in the second block of code?
Environment *pEnv = Environment::createEnvironment( Environment::OBJECT);
Connection *pCon = pEnv->createConnection( "MYAPP", "PASSWORD", "MYDB");
MetaData data = pCon->getMetaData( "PERSON_VIEW", MetaData::PTYPE_VIEW);
Environment *pEnv = Environment::createEnvironment( Environment::OBJECT);
Connection *pCon = pEnv->createConnection( "USER", "PASSWORD", "MYDB");
Statement *pStatement = pCon->createStatement( "set role MYAPP_ROLE identified by PASSWORD");
pStatement->executeUpdate();
MetaData data = pCon->getMetaData( "PERSON_VIEW", MetaData::PTYPE_VIEW);

In case anyone cares, the actual problem is that the OCCI throws an Ora-4043 when describing a SYNONYM in 10.1.0.3. This has been designated a bug and assigned to the development team. :o)

BPEM End User role does not appear

Hi masters
What should I do to make the BPEM End User role appears on the portal Identity Management ?

Hi Ganga,
Firstly, check the BPM usage type is loaded in your SAP NetWeaver 7.3 system at http://<host>:<port>/utl/UsageTypesInfo
If the BPM usage type is loaded, check the BPM configuration wizards have been run in the SAP NetWeaver Administrator - http://<host>:<port>/nwa > Configuration > Scenarios > Configuration Wizard
Finally check the role exists via the SAP NetWeaver Administrator - http://<host>:<port>/nwa > Configuration > Security > Identity Management
If you aren't seeing all the options in SAP NetWeaver Administrator then you need to find someone with more authority and get them to grant you the SAP_BPM_SuperAdmin or SAP_BPM_SuperDisplay role.
If that's all ok you can then go back and check the role is visible in the Portal.
Regards,
Jocelyn

Role folder not appearing

Hi Experts,
I need to save work book under a specific Role. When I click on "Save Workbook as "...couldn't find the Roles folder only able to see Favorites.
To save a workbook to a role Iam maintaining the following authorisations and assigned to user.
S_USER_AGR: ACTVT = *,
ACT_GROUP = [name of the role ]
S_USER_TCD: TCD = RRMX
Please let me know.. am I missing some thing to enable Roles folder?
thanks in advance.
regards,
Raju

You must to add one report (query - woorkbook...) in the Menu from PFCG.
Then add this role to your user and then you can see this.
I hope you can solve the problem with this.
See you

Role created in ERM is not appearing in CUP request for assignment-GRC 10.0

Hi,
We are on GRC 10.0 - SP5
We have created a role in ERM and it was succesfully created in backend system. However when we tried to assign the same role using CUP request - the role is not appearing.
1) Do we need to upload roles for CUP in GRC 10.0 (similar to 5.3) to populate. Will the role doesnot automatically appears in GRC database for CUP as it is created through ERM?
2) If the roles are imported in ERM with role owner information, does the same reflects for CUP also for role owner approver assignments?
Thanks and Best Regards,
Srihari.K

Hi Sri,
Is the role status set to "production" ??
Cheers,
Diego.

Active activities do not appear in workload chart

Actually i´m facing a problem:
I don´t know why active activities assigned to a parametric role do not appear in the workload chart in workspace. All other activities appear but this ones not.
Have someone had the same problem ?

Hi
we made a change which is why the other service principals were exposed in the UI briefly we rolled that back earlier in the week but this should not have removed your custom applications from the view.
If you select the drop down box do you get a different filter;view? does that show your applications?
James.

Transport of Query successful, but changes not appeared in the report

Hi All,
I have 2 Queries(Normal and Total stock reports on the same InfoProvider) in Prd.
For that User asked me to add one characteristic to Free characteristics.
I added one characteristic in Free Characteristics to both Queries in Dev and i collected the Transport requests for both the queries in RSA1->TRANSPORT CONNECTIONS and gave it to basis guy, he transported successfully to PRD and for both the reports the changes reflected in the
query designer, while executed the Normal stock report the characteristic added in free characteristics appeared and while drill down the data is coming, but for the Total stock report the changes appeared in Query designer but on executing the report even the characteristic added to Freecharacteristics is not appearing in Navigation Pane.
Also with the same technical name of total stock report there are 2 reports appearing in query designer. what to do now.
Help me here asap..
Thanks,
Chaitu.
Edited by: chaithu218 on Jun 21, 2011 10:37 AM
Edited by: chaithu218 on Jun 21, 2011 10:40 AM

Hi Chaithu,
As you mentioned that you can see 2 versions by the same technical name in designer for total stock report, it is highly probable that the query you are changing and the query you are executing are different.
2 versions of a query can exist with the same technical name as the system identifies the queries by their UIDs, which would be different for both these versions of queries.Following are the things you need to check:
1) In development system too, do you have 2 versions?
2) In production system, check the UID for both verions of the query
3) In Dev system, make sure you modify the query with UID which is being executed, if it is available there. Else, you need to replace the query in prod with the one you have in Dev system.
2 versions by same technical name can exist if:
1) Someone created a query directly in Prod, and transported a query by same technical name from Dev system
2) or due to system refresh, copy, etc.
Hope it helps.
Thanks,
Abhishek.

Role not appearing in Top Navigation Level

I have to roles ESS and MSS, I want to add UWL on the Top Navigation Level as a separate role. I have created the UWL role and assigned to the User. However, it is not appearing when logging on to the ESS and MSS roles.
Are there some other settings I need to make?
Any ideas? Points awarded.
Thanks
MN

Hi Monkey,
you have to define this role as an "entry point". Please go to the PCD, select the role and click on the "Entry Point" option on the details. Then save the role.
And do not forget to check if the user has proper permissions for the role.
When you log on to the ESS and MSS roles you should see the role.
Hope this helps,
Petr

In Stpo transport, load and goods issue line is not appear

Hi MM Expert's
I am creating the STPO's (Different company codes) in items details -> Del.sch-> transport, load date and goods issue is not appear. The Delivery date is 25.02.2008. next day the user as change the del.date from 25th to 26th. transport,load date and goods issue is appear.
Anybody plz tell me how its happen like this, and tell the root cause.
Regards
chandru.

hi
shipping point calendar and route calendar must be equal here.
but
i dont know why these are different here.
because it is overtaking or superseeding the shipping calendar here.
make the shipping point and route calendar in sync with each other.
test and confirm
balajia

STPO's -- load date , goods issue, transport is not appear

Hi Guru's
I'm received one case, while creating the STPO's (Different company codes) in items details -> Del.sch-> transport, load date and goods issue is not appear. The Delivery date is 25.02.2008. next day the user as change the del.date from 25th to 26th. transport,load date and goods issue is appear.
Anybody plz tell me how its happen like this, and tell the root cause.
Regards
chandru.

Hi Nilima,
When running off RSA3, it will use a dialog process while when called from the PC it will be using a background process. Check the 'abap/time' setting in rz11.
Moreover, if it took only two hours to process last month, it is improbable that data has increased to such a large extent in a month's time.
It is possible that new jobs have been added on the R/3 side that runs at this time.
It may be a good idea to try and run this Process Chain when the R/3 system is lightly loaded.
Discuss this with the Basis Team.
Best Luck!
Mathew.

Transport Req number is not appearing

Hi ABAPers,
i implemented Zreport program in client 300. it has tr.req.number. when i want to release this, this tr.req number is not appearing in se09/se10. what could be the reason. please explain me.
landscape is : 100:Dev client. 200:Client 300 config only
Thanks in advance.
hari

Transport Request within same Server Different Clients
I have 3 clients under one SID (dev 130,140,150).
And we have more than 400+ transport requests in client 130. How can we transport these requests to other clients of 140 & 150. If I want to use tcode SCC1, that can be done only one tran. request at one time.
Do I need to write a script within unix?
SAP 4.6C
Oracle 9.2
AIX 5.2
Mohd Zainizam
Try STMS.
Click on the "import overview"
Double click on your target system
Click "refresh"
Click on "import all request" or ctrl+F9
Specify the target client
Execute the transport
Done...
Ronald Ramos
But this will import all request.....thousands of them...
Mohd Zainizam
You can use Extended Transport Control.
Extended Transport Control is another way to set up the Transport Route so that the route is system and CLIENT specific.
In other words, when you release a change request in DEV Client 0XX it will not only automatically be added to the Import Queue for QAS but also 0X1, 0X2, of DEV.
To set this up requires the steps below:
1) Open the file TP_DOMAIN_DEV.PFL (located on your transport domain controller such as the DEV box. The file will be in usrsaptrans/bin)
Edit with notepad for each parameter on each system:
DEV/CTC = 0
Change to =1
2) Next you need to create Target Group before creating the transport route.
Create a Target Group:
Access the initial screen of the graphical or the hierarchical editor in change mode. STMS > Overview > Transport Routes (the default editor will appear, either Hierarchical or Graphical, to change the default editor : STMS > Extras > Settings > Transport Routes. You can also switch to one or the other from Goto > Graphical Editor.)
> Configuration > Display Change > (or change icon or F5)
Edit > Transport Target Groups > Create
In the dialog box, Create Target Group:
Enter a name for the target group /GR_QA/ (The name must begin and end with a forward slash /)
...and a description Targets for Consolidation route
Choose "Insert line"
Enter the required target system/client combinations
Use a separate line for each client.
Example:
Target System
Target Client
Client Name
DEV
0X1
Sandbox
DEV
0X2
Testing
QAS
0XX
Quality Assurance System
The idea is that we want to include the clients that will get an addition to their import queue when we release a change request from DEV.
Choose Transfer
Now you have to change the transport route to include the Target Group you created.
STMS > Overview > Transport Routes > F5 (change mode) Edit > Transport Routes > Delete
Now create a Transport Route with Extented Transport Control:
STMS > Overview > Transport Routes > F5 (change mode) Edit > Transport Routes > Create > Extended Transport Control icon at lower left of dialog box. > Consolidation route, enter integration system and transport layer. In Target system/client enter the SID of either an R/3 System and a client or an existing Target Group.
Each System must be specified by System and Client. The Target Group can be used for the consolidation system.
Distribute and activate the changes as usual by choosing Configuration > Distribute and activate
NOTE: After you set up Extended Transport Control there might be requests in an import queue that will show a red status in the CTL column. This is because these change requests need a client specified before they can be imported. These are old requests that were already in the queue.
From Import Queue Screen Mark the change request
Choose Request > Target Client > Set
Enter the Target Client ID and choose Enter.
To change a target client before starting an import:
Import Queue Screen > mark Change request > target client > change > enter target client id and choose enter.
Hope this helps.
Good luck!

Standard New button for creation of bp is not appeared in ic agent bp role's main page.

I have checked in.htm page of ICCMP_BP_MUL_S/BuPaSearchB2B which is getting called in web.
in line no. 45 of .htm page there is condition to check whether new button should be displayed or not, when this condition is true no_bp_create is initial then only new button appears in ic agent.
I have debugged so many times but unable to find out from where no_bp_create flag is populated and in conclusion new button is not appeared .
I think there is some authorization which should be assigned to user for creation of bp so that above said flag (no_bp_create) is not getting populated.
if i am on right track so please let me know which authorization is to be assigned to user so that user can see new button in ic_agent.

Hi Sunny,
The parameter no_bp_create is being set in the do_init_context method of the view controller class of same view but the value is being fetched using a badi.
The authorization to create BP can be enabled by implementing the BADI BADI_CRM_BP_UIU_AUTHORITY (or enhancement spot CRM_UIU_BP_ENHANCEMENT).
Users can be authorized to create/edit data for different UI components using this badi.
In this badi put the condition for the application name may be as (based on your scenario or explore more) cl_crm_ic_bp_constants=>gc_bp_create OR OR cl_crm_ic_bp_constants=>gc_bp_edit and set the value of parameter cv_not_allowed = abap_false. Then you should be able to see the New button.
Regards,
Shobhit

Roles In SAP Web AS ABAP would not appear automatically in J2EE Engine

I have an ABAP+Java Addin Instance Installed.
When I create a user, it shows up in the Jave Engine when I goto Services->Security Provider.
But the ABAP roles would not show up in the Java Engine.
Please advise..

HI,
It depends on the UME chosen,
You need to ensure your ume config allows groups to be created. check the xml you have chosen,
also permission for sapjsf.
Cheers,
Chetan

BW Role Transport not appearing

Similar Messages

Maybe you are looking for