Bypass scenario with a specific file naming schema

Hi,
I am working on a bypass scenario where I pick a file from FTP location with naming conventions SCOS2UVMS_.TXT and place the file at other location with the name USED_Car.TXT.
Now I have to place this file with the Date and Time Stamp as DYYMMDD.THHMMSS.
How can I achieve this?
Thanks & Regards,
Sachi

Hi,
U can bypass the Integration repository steps and pass a file from 1 locatio to other.
U need to configure only the Integration Directory. In all the objects (sender agreement,Receiver determination,Interface determination,Receiver agreement) just give the interface name as dummy and name space also dummy.
Means u just give a arbitary interface name and namespace,which doesn't exist.
Then run the sender communication channel and check in target directory.
This will work fine....
But i think its nt a good idea to use SAP PI, for the just sake of transferring the files from 1 location to other.
U can schedule a batch file,and move the files b/w two locations.
I hope this will solve ur problem..
Babu

Similar Messages

Cannot open a a file with a specific file name

I have 1 person who cannot open or save a file with a specific file name on his computer. If he does it at another computer he is fine, no one else has this issue. The error he gets when trying to open the file is { Cannot create file:missingperson.pdf. Right-click the folder you want to create the file in, and then click Properties on the shortcut menu to check your permissions for the folder}
Any ideas on how to resove this. He gets this file sent to him on a regular basis, and cannot have the file name changed.
Thank you

I have run across something similar. Assuming that this PDF they are getting through email is the same name, then this is how I fixed my problem.
When you get a file in an email and open it, it writes that file to the Temporary Internet Files folder. Lets assume the file name is filename.pdf If you open a file from email with the same name at a later time, it creates a file called filename(1).pdf. Open a file with the same name again, it creates filename(2).pdf, and so on. Once you get to filename(99).pdf, it will start giving you a lot of trouble. When I cleared out those filename.pdf's, everything went back to normal.
Hope this helps.

PSE 11 Orgaziner to open with a specific file.

Like that PSE 11 Orgaziner opens with a specific file, like it did with PSE 9, 6 etc.
Anybody knows how to do this??

Are these jpegs? If so make Organizer the default program by right clicking on any jpeg file in one of your folders and choosing.
Open With >> Choose Default Program >> Browse
Navigate to:
"C:\Program Files (x86)\Adobe\Elements 11 Organizer\PhotoshopElementsOrganizer.exe"

Computers with a specific file

Does anyone know how I can scan for computers that have PST files on them?? I tried using "Home >ConfigMgr_ATT >Software
- Files > Computers with a specific file" but I can't get it to reply with any files.

Hi,
to manage computers with a specific file you need to enable software inventory and file detail collection inside the client settings.
Once the rules have been established and deployed to your client computers then they should report their file version and you'll be able to run reports against that data.

Changing Time Stamp in Receiver Adapter's File Naming Schema.

Hi All,
I am working on a ABAP Proxy to File(FTP with FCC) scenario.
I have a requirement to place the file at FTP with naming schema XSP_SUPPLIER_CC_DD_MM_YYYY.csv.
I have checked many blogs which talks about Dynamic Configuration, but here the naming schema we fetch is from sender file adapter's ASMA(Adapeter Specific Message Attributes).
But in my case sender side is ABAP proxy.
How can I achieve this??
Please suggest.
Regards,
Sachi

Hi,
>> but here the naming schema we fetch is from sender file adapter's ASMA(Adapeter Specific Message Attributes).But in my case sender side is ABAP proxy.
You can use dynamic configuration to not only fetch values from message header you can use it to put values to message heade also.....you can write UDF (code will look like below) and in the UDF you can create string with required filename and concatinate it with the timestamp...
try {
String filename    = "";
String timestamp = "";
DynamicConfiguration conf1 = (DynamicConfiguration) container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key1 = DynamicConfigurationKey.create( "http:/"+"/sap.com/xi/XI/System/File","FileName");
filename = "XSP_SUPPLIER_CC_"sourceFiledValue(Supplier)addtimestamphere+".csv";
conf1.put(key1,filename);
return filename;
catch(Exception e)
     String exception = e.toString();
      return exception;
Supplier>UDF>TargetMessage
In the file receiver communication channel check the ASMA property target filename.
Regards,
Priyanka

How can I list all folders that contain files with a specific file extension? I want a list that shows the parent folders of all files with a .nef extension.

not the total path to the folder containing the files but rather just a parent folder one level up of the files.
So file.nef that's in folder 1 that's in folder 2 that's in folder 3... I just want to list folder 1, not 2 or 3 (unless they contain files themselves in their level)

find $HOME -iname '*.nef' 2>/dev/null | awk -F '/' 'seen[$(NF-1)]++ == 0 { print $(NF-1) }'
This will print just one occurrence of directory
The 'find' command files ALL *.nef files under your home directory (aka Folder)
The 2>/dev/null throws away any error messages from things like "permissions denied" on a protected file or directory
The 'awk' command extracts the parent directory and keeps track of whether it has displayed that directory before
-F '/' tells awk to split fields using the / character
NF is an awk variable that contains the number of fields in the current record
NF-1 specifies the parent directory field, as in the last field is the file name and minus one if the parent directory
$(NF-1) extracts the parent directory
seen[] is a context addressable array variable (I choose the name 'seen'). That means I can use text strings as lookup keys. The array is dynamic, so the first time I reference an element, if it doesn't exist, it is created with a nul value.
seen[$(NF-1)] accesses the array element associated with the parent directory.
seen[$(NF-1)]++ The ++ increments the element stored in the array associated with the parent directory key AFTER the value has been fetched for processing. That is to say the original value is preserved (short term) and the value in the array is incremented by 1 for the next time it is accessed.
the == 0 compares the fetched value (which occurred before it was incremented) against 0. The first time a unique parent directory is used to access the array, a new element will be created and its value will be returned as 0 for the seen[$(NF-1)] == 0 comparison.
On the first usage of a unique parent directory the comparison will be TRUE, so the { print $(NF-1) } action will be performed.
After the first use of a unique parent directory name, the seen[$(NF-1)] access will return a value greater than 0, so the comparison will be FALSE and thus the { print $(NF-1)] } action will NOT be performed.
Thus we get just one unique parent directory name no matter how many *.nef files are found. Of course you get only one unique name, even if there are several same named sub-directories but in different paths
You could put this into an Automator workflow using the "Run Shell Script" actions.

E-load - Playing back a Scenario with a Specific Execution Order

Hi
I have a doubt about scenarios in e-load: is there any way for a Scenario to run in a defined order?
For example.. In one scenario I have 3 User Defined Profiles (UDP1, UDP2 and UDP3), is there a way to make the scneario playback the UDPs in order? (for example UDP3,UDP2, UDP1) or them just ran rancomly?
Thanks a lot

Juan,
The autopilot tries to schedule at least one virtual user of every profile to be started every ramp-up. It's not neccessary random, but depending on the number of vusers in each profile you may not get a new profile user started each time. It is not random, and the same scenario will start the same every time.
To answer you question about how to start sequentially. You are correct there is no direct method. What you may be able to do, is edit your User Defined Profiles and insert synchronization points in each. For instance, In UDP1 name a SYNC1 syncpoint and insert as the last item in the UDP, and then in UDP2 name a SYNC2 syncpoint, ect... This is only one thought. How many virtual users are you planning to run of each profile?

Unable to copy/cut/paste from within custom file naming dialogue (in exporting images)

When I go into the export dialogue and select a portion of a file naming scheme, I cannot get it into the clipboard. I had wanted to cut a portion of the specification, export with an amended name, and then paste the original back. I am running the beta in Win7 64-bit.

Advice:
1) Check Copy in sand-boxed app. in 1.6.0_24+.
2) Do not hi-jack the threads of other people. Start a new thread and if you think another thread relates to your problem, link to it.

File naming: sequencing by date

In the Filename Template Editor and Rename Photos (F2) function, I'd like to be able to sequence my file names by date, with the sequence beginning with 1 for each day, and incrementing regardless how many imports I do.
For example, the first image for January 2, 2008 might be called "08-01-02_001". On that day I may perform three or four imports, and the sequence continues to increment from 001 to however many images I import on that day. The following day the sequence automatically resets to 1.
If images are imported that were recorded on an earlier date, this function would have to increment from the highest number of the date the image was recorded (because this is how Lightroom's date function works). For example, if on December 28, 2007 I shot 243 images and today I import another image that was shot on that day, the file name would be 07-12-28_244.
(I currently sequence by month, manually specifying the start number for each import sequence, but I sometimes forget to change the sequence starting number.)
Thank you for all you've done. I can't imagine working without Lightroom.

I would like to see exactly the same enhancement. Perhaps for some file naming schemes it would be helpful to parameterize that function, e.g., "Resent sequence number [to xxx] whenever [date|month|year|camera ...] changes].
As part of that, I would like very much to have more options/control for the file organization. In particular, I would like to see yyyy/yyyymm/yyyymmdd (e.g., 2008/2008-01/2008-01-15 with the "-" being optional). Right now, the closest you can come to that is yyyy/mm/dd, which leaves too much opportunity for file/folder name confusion.
dds

Multiple files with the same file name within the same folder

It looks like a finder bug. To replicate, I surf to any website, I right-click on a jpg image, select "Save Image As" and in the window that pops up I type in the filename "000.jpg", I select the folder Pictures, and click on Save.
BTW, I don't know why, but the file was saved only as "000" without the file extension ".jpg". Does anybody know why?
Then I surf to another image, and again I save it as "000.jpg" and now it asks me if I want to replace the existing filename, although the existing one is "000" and I try to save as "000.jpg", so I say yes, and then magically the file is saved with the full filename including the extension "000.jpg"
When I did it a couple of times, always saving image as "000.jpg" from various sources, I ended up with two distinct files named "000" and both in the same folder Pictures.
Please advise.

Misio wrote:
It looks like a finder bug. To replicate, I surf to any website, I right-click on a jpg image, select "Save Image As" and in the window that pops up I type in the filename "000.jpg", I select the folder Pictures, and click on Save.
BTW, I don't know why, but the file was saved only as "000" without the file extension ".jpg". Does anybody know why?
the extension is simply hidden. go to the get info panel for the file and uncheck the option to hide the extension.
Then I surf to another image, and again I save it as "000.jpg" and now it asks me if I want to replace the existing filename, although the existing one is "000" and I try to save as "000.jpg", so I say yes, and then magically the file is saved with the full filename including the extension "000.jpg"
When I did it a couple of times, always saving image as "000.jpg" from various sources, I ended up with two distinct files named "000" and both in the same folder Pictures.
Please advise.
it sounds to me like you saved one file as 000.jpg and the other and 000.jpg.jpg.
check the info panels for the files for full names to verify if this is the case.

When saving a File OS Is Creating Multiple Folders With The Same File Name

Not sure what I changed but, now when I save a any file (ppt. word, Keynote,Pages e.g.,) to the desktop or any other location the OS will also create multiple file folders with the same file name as the file I'm saving. Inside the folders are what appears to be files locating the saved files. What can I do to fix this problem?
I'm using the 10.7.2 version
MacBook Pro

Misio wrote:
It looks like a finder bug. To replicate, I surf to any website, I right-click on a jpg image, select "Save Image As" and in the window that pops up I type in the filename "000.jpg", I select the folder Pictures, and click on Save.
BTW, I don't know why, but the file was saved only as "000" without the file extension ".jpg". Does anybody know why?
the extension is simply hidden. go to the get info panel for the file and uncheck the option to hide the extension.
Then I surf to another image, and again I save it as "000.jpg" and now it asks me if I want to replace the existing filename, although the existing one is "000" and I try to save as "000.jpg", so I say yes, and then magically the file is saved with the full filename including the extension "000.jpg"
When I did it a couple of times, always saving image as "000.jpg" from various sources, I ended up with two distinct files named "000" and both in the same folder Pictures.
Please advise.
it sounds to me like you saved one file as 000.jpg and the other and 000.jpg.jpg.
check the info panels for the files for full names to verify if this is the case.

File naming issue/workflow help needed...

I shoot weddings and am continually frustrated with A2's file naming. Any suggestions or help would be greatly appreciated as it's killing my workflow.
THE GOOD: I import the images with the file name I want and the metadata I want. I then edit out, deleting bad images and leaving borderline images (as outtakes) in the project while putting my selects together for the client in a smart album. I put the selects in a smart album based on their rating and keywords. The selects are not sequential, so I "select all" and make "batch change" putting them in sequence.
THE BAD: Here is where I always encounter my first problem. Any images I have have worked on (in Photoshop) for my website now have different names. So when I export all in the album, the worked-on versions don't fit in sequentially. And some stacks have the edited image on top, and others do not.
The other problem is when a bride places an order. I find the corresponding file and externally edit it. It now resides in the smart album with a different name than all the files around it. I put the print size in the exported version name and I have to open the dialog box for every single image and re-type the size in the custom name space. I have an order with 295 different images and it's killing me. The other problem is when the bride goes to re-order a print she has, the number on the back has no connection to the numbers on my site or the smart album.
I find I'm going back to Photomechanic more often just to organize and name images because it actually changes the name of the file instead of "masking" it as A2 seems to do.
Is there a way to keep A2 from doing this and how do I get the adjusted image to be the pick of the stack?
Thanks-Kevin

I happily paid the 20 bucks for 'A Better Finder Renamer' and was able to have it batch rename RAW files to my needs. It uses simple Boolean logic to cut or add to a file name and can read time stamps from the file.
http://www.apple.com/downloads/macosx/productivity_tools/abetterfinderrename.htm l

Batch file naming in Photoshop 6.0

I have tried every which way I can to rename photos I have scanned in using the Automate Batch process. I have used the batch to perform other tasks, but I am having no luck with renaming using the year, a 3 digit number (to keep the photos in order) and then the extension (Tiff). I downloaded the update which was supposed to take care of a problem they were having with the batch file naming problem, but I am still having no success. Please, any input will be appreciated.

I assume you're asking about Elements. That forum is down the hall...two
doors on the left.
Bob

Pick up a specific file with File Sender Adapter.

Hi guys,
I would like to know how I can pick a specific file in a file pool (folder)? I would like to choose this file by name, like FileA or FileB, etc.
Im asking this because I have an asynchronous file scenario (BPM) with a receiver adapter that put the File with a specific name (variable substitution) in a folder.
And I would like to do something like this:
In another asynchronous scenario (BPM), a File sender adapter picks up this specific file (using the name). The correlation is made trough an IDOC that XI receives before pick up the file, this IDOC has payload field with the name of file to be picked.
Is it possible receives the IDOC, read the field with the name of the file to be picked and choose this specific file? In a Sender File Adapter how I can do something like variable substitution like receiver adapter does.
Thanks in advance,
Ricardo.

Hi,
<i>Is it possible receives the IDOC, read the field with the name of the file to be picked and choose this specific file? In a Sender File Adapter how I can do something like variable substitution like receiver adapter does.</i>
No this is not possible. The only dynamic thing you can do is use wild card characters like *.
So, maybe you can pick a file like . or AA. and so on...
Regards,
Bhavesh

IDOC to XML file scenario with party

Hi All,
I am developing a IDOC to XML file scenario with party in which I have extended the MATMAS idoc and configured the receiver FILE communication channel.
But its giving me the error *"No receiver could be determined"* with party. If I run the same scenario without the sender party its working fine.
And sender is my R/3 system under party P_Party and receiver is my third party system under P_Party.
Thanks in advance.
Gaurang

U can give a try as follows.
In the Partner Profile of Sender R/3 system,
Give the Receiver Party P_Party in the PartnerNo. Give the 'Business Partner' as logical System type.
In XI, Party Definition of P_Party
Give the following Alternative Identifier
Agency -   Sender R/3 Business System
Scheme -   ALE#GP
Value    -    P_Party

Bypass scenario with a specific file naming schema

Similar Messages

Maybe you are looking for