Bypassing error files to continue rpocessing reamining files (file to MQ XI

I have  an interface which is file to MQ...A series of files arrive which is processed and sent to MQ
But  incase I have a file whose lenght varies then what has been configured in design....it gives content conversion error and...due to this files which have arrived following this file are not getting processed..it halts..need a way to bypass this error file so that processing continues......
points will be rewarded

I Think I found the problem. My HardDrive is full

Similar Messages

  • PXE T01 file not found PXE E3B TFTP Error file not found error

    Hi,
    I was trying to deploy OS through SCCM . i have made DHCP server and  SCCM PC one PCst when i am trying to boot from client to DHCP by f12 i am getting following error. so that i have been completed following steps
    TFTP
    PXE-T01: File not found
    PXE:E3B: TFTP Error- File not found
    1)Removed WDS service and reconfigured
    2)PXE role removed and re assigned
    3)renamed temp folder
    4)DP updated
    suppose if i am trying to access the port throgh telnet
    i am getting
    C:\Documents and Settings\Administrator>telnet 192.168.1.65 60
    Connecting To 192.168.1.65...Could not open connection to the host, on port 60:
    Connect failed
    C:\Documents and Settings\Administrator>telnet 192.168.1.65 67
    Connecting To 192.168.1.65...Could not open connection to the host, on port 67:
    Connect failed
    C:\Documents and Settings\Administrator>telnet 192.168.1.65 66
    Connecting To 192.168.1.65...Could not open connection to the host, on port 66:
    Connect failed
    C:\Documents and Settings\Administrator>telnet 192.168.1.65 65
    Connecting To 192.168.1.65...Could not open connection to the host, on port 65:
    Connect failed
    SCCM PXEsetup.log
    ====================================================================
    <05-17-2011 22:02:14> SMSPXE Setup Started....
    <05-17-2011 22:02:14> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
    <05-17-2011 22:02:14> Installing Pre Reqs for SMSPXE
    <05-17-2011 22:02:14>         ======== Installing Pre Reqs for Role SMSPXE ========
    <05-17-2011 22:02:14> Found 2 Pre Reqs for Role SMSPXE
    <05-17-2011 22:02:14> Pre Req MSXML60 found.
    <05-17-2011 22:02:14> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
    <05-17-2011 22:02:14> Pre Req MSXML60 is already installed. Skipping it.
    <05-17-2011 22:02:14> Pre Req Wimgapi found.
    <05-17-2011 22:02:14> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
    <05-17-2011 22:02:14> Pre Req Wimgapi is already installed. Skipping it.
    <05-17-2011 22:02:14>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
    <05-17-2011 22:02:14> Installing the SMSPXE
    <05-17-2011 22:02:14> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
    <05-17-2011 22:02:14> Error - WDS is not installed. Installation cannot continue
    <05-17-2011 23:02:35> ====================================================================
    <05-17-2011 23:02:35> SMSPXE Setup Started....
    <05-17-2011 23:02:35> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
    <05-17-2011 23:02:35> Installing Pre Reqs for SMSPXE
    <05-17-2011 23:02:35>         ======== Installing Pre Reqs for Role SMSPXE ========
    <05-17-2011 23:02:35> Found 2 Pre Reqs for Role SMSPXE
    <05-17-2011 23:02:35> Pre Req MSXML60 found.
    <05-17-2011 23:02:35> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
    <05-17-2011 23:02:35> Pre Req MSXML60 is already installed. Skipping it.
    <05-17-2011 23:02:35> Pre Req Wimgapi found.
    <05-17-2011 23:02:35> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
    <05-17-2011 23:02:35> Pre Req Wimgapi is already installed. Skipping it.
    <05-17-2011 23:02:35>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
    <05-17-2011 23:02:35> Installing the SMSPXE
    <05-17-2011 23:02:35> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
    <05-17-2011 23:02:35> Error - WDS is not installed. Installation cannot continue
    <05-17-2011 23:38:26> ====================================================================
    <05-17-2011 23:38:26> SMSPXE Setup Started....
    <05-17-2011 23:38:26> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
    <05-17-2011 23:38:26> Installing Pre Reqs for SMSPXE
    <05-17-2011 23:38:26>         ======== Installing Pre Reqs for Role SMSPXE ========
    <05-17-2011 23:38:26> Found 2 Pre Reqs for Role SMSPXE
    <05-17-2011 23:38:26> Pre Req MSXML60 found.
    <05-17-2011 23:38:26> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
    <05-17-2011 23:38:26> Pre Req MSXML60 is already installed. Skipping it.
    <05-17-2011 23:38:26> Pre Req Wimgapi found.
    <05-17-2011 23:38:26> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
    <05-17-2011 23:38:26> Pre Req Wimgapi is already installed. Skipping it.
    <05-17-2011 23:38:26>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
    <05-17-2011 23:38:26> Installing the SMSPXE
    <05-17-2011 23:38:26> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
    <05-17-2011 23:38:26> WDS Service is installed.
    <05-17-2011 23:38:26> No versions of SMSPXE are installed.  Installing new SMSPXE.
    <05-17-2011 23:38:26> Enabling MSI logging.  pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
    <05-17-2011 23:38:26> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
    <05-17-2011 23:39:47> pxe.msi exited with return code: 0
    <05-17-2011 23:39:47> Installation was successful.
    <05-18-2011 22:20:04> ====================================================================
    <05-18-2011 22:20:04> SMSPXE Setup Started....
    <05-18-2011 22:20:04> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /deinstall /siteserver:DRDO-QQLUVGDI0P SMSPXE
    <05-18-2011 22:20:04> Deinstalling the SMSPXE
    <05-18-2011 22:20:04> Enabling MSI logging.  pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
    <05-18-2011 22:20:04> Deinstalling SMSPXE, with product code {C63C1FBD-C9C8-469D-8ADE-12387FB5EA75}
    <05-18-2011 22:20:15> SMSPXE deinstall exited with return code: 0
    <05-18-2011 22:20:15> Deinstallation was successful.
    <05-18-2011 22:20:15> Removing PXE Registry.
    <05-18-2011 22:23:18> ====================================================================
    <05-18-2011 22:23:18> SMSPXE Setup Started....
    <05-18-2011 22:23:18> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
    <05-18-2011 22:23:18> Installing Pre Reqs for SMSPXE
    <05-18-2011 22:23:18>         ======== Installing Pre Reqs for Role SMSPXE ========
    <05-18-2011 22:23:18> Found 2 Pre Reqs for Role SMSPXE
    <05-18-2011 22:23:18> Pre Req MSXML60 found.
    <05-18-2011 22:23:18> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
    <05-18-2011 22:23:18> Pre Req MSXML60 is already installed. Skipping it.
    <05-18-2011 22:23:18> Pre Req Wimgapi found.
    <05-18-2011 22:23:18> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
    <05-18-2011 22:23:18> Pre Req Wimgapi is already installed. Skipping it.
    <05-18-2011 22:23:18>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
    <05-18-2011 22:23:18> Installing the SMSPXE
    <05-18-2011 22:23:18> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
    <05-18-2011 22:23:18> WDS Service is installed.
    <05-18-2011 22:23:18> No versions of SMSPXE are installed.  Installing new SMSPXE.
    <05-18-2011 22:23:18> Enabling MSI logging.  pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
    <05-18-2011 22:23:18> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
    <05-18-2011 22:24:11> pxe.msi exited with return code: 0
    <05-18-2011 22:24:11> Installation was successful.
    <05-18-2011 22:31:06> ====================================================================
    <05-18-2011 22:31:06> SMSPXE Setup Started....
    <05-18-2011 22:31:06> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
    <05-18-2011 22:31:06> Installing Pre Reqs for SMSPXE
    <05-18-2011 22:31:06>         ======== Installing Pre Reqs for Role SMSPXE ========
    <05-18-2011 22:31:06> Found 2 Pre Reqs for Role SMSPXE
    <05-18-2011 22:31:06> Pre Req MSXML60 found.
    <05-18-2011 22:31:06> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
    <05-18-2011 22:31:06> Pre Req MSXML60 is already installed. Skipping it.
    <05-18-2011 22:31:06> Pre Req Wimgapi found.
    <05-18-2011 22:31:06> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
    <05-18-2011 22:31:06> Pre Req Wimgapi is already installed. Skipping it.
    <05-18-2011 22:31:06>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
    <05-18-2011 22:31:06> Installing the SMSPXE
    <05-18-2011 22:31:06> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
    <05-18-2011 22:31:06> WDS Service is installed.
    <05-18-2011 22:31:06> SMSPXE already installed (Product Code: {C63C1FBD-C9C8-469D-8ADE-12387FB5EA75}).  Upgrading/Reinstalling SMSPXE
    <05-18-2011 22:31:06> New SMSPXE is the same product code.  This is a minor upgrade.
    <05-18-2011 22:31:06> Enabling MSI logging.  pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
    <05-18-2011 22:31:06> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi REINSTALL=ALL REINSTALLMODE=vmaus CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
    <05-18-2011 22:35:43> pxe.msi exited with return code: 0
    <05-18-2011 22:35:43> Installation was successful.
    <05-18-2011 23:41:19> ====================================================================
    <05-18-2011 23:41:19> SMSPXE Setup Started....
    <05-18-2011 23:41:19> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /deinstall /siteserver:DRDO-QQLUVGDI0P SMSPXE
    <05-18-2011 23:41:19> Deinstalling the SMSPXE
    <05-18-2011 23:41:19> Enabling MSI logging.  pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
    <05-18-2011 23:41:19> Deinstalling SMSPXE, with product code {C63C1FBD-C9C8-469D-8ADE-12387FB5EA75}
    <05-18-2011 23:41:33> SMSPXE deinstall exited with return code: 0
    <05-18-2011 23:41:33> Deinstallation was successful.
    <05-18-2011 23:41:33> Removing PXE Registry.
    <05-19-2011 00:38:50> ====================================================================
    <05-19-2011 00:38:50> SMSPXE Setup Started....
    <05-19-2011 00:38:50> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
    <05-19-2011 00:38:50> Installing Pre Reqs for SMSPXE
    <05-19-2011 00:38:50>         ======== Installing Pre Reqs for Role SMSPXE ========
    <05-19-2011 00:38:50> Found 2 Pre Reqs for Role SMSPXE
    <05-19-2011 00:38:50> Pre Req MSXML60 found.
    <05-19-2011 00:38:50> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
    <05-19-2011 00:38:50> Pre Req MSXML60 is already installed. Skipping it.
    <05-19-2011 00:38:50> Pre Req Wimgapi found.
    <05-19-2011 00:38:50> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
    <05-19-2011 00:38:50> Pre Req Wimgapi is already installed. Skipping it.
    <05-19-2011 00:38:50>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
    <05-19-2011 00:38:50> Installing the SMSPXE
    <05-19-2011 00:38:50> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
    <05-19-2011 00:38:50> WDS Service is installed.
    <05-19-2011 00:38:50> No versions of SMSPXE are installed.  Installing new SMSPXE.
    <05-19-2011 00:38:50> Enabling MSI logging.  pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
    <05-19-2011 00:38:50> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
    <05-19-2011 00:39:15> pxe.msi exited with return code: 0
    <05-19-2011 00:39:15> Installation was successful.

    I have similar issue same above error but this error i am getting intermittent  keeping trying 2 or 3 times i get F12 option to boot the network services 
    TFTP
    PXE-T01  The specified file not found 
    PXE-E3B TFTP Error : File not found 
    Our environment have DHCP configured In Inflobox and the Primary site server and PXE DP server located in Same Subnet and configured 2008 R2 sp1 and configured  SCCM2012 in VM environment 
    I tried all the Options uninstall and re-install no luck and i have tried to increase Tramsmiit and recive Buffer size in lan card but the issue is not resolved.
    Capture smspxe log when it found boot image the pxe working ,when it not found getting TFTP error.
    SMSPxe log says no errors but getting client Pxe TFTP error file not found  (Since its not looking Image throw out TFTP error)
    Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777230" ServerName="" ServerRemoteName=""><Machine><ClientID>GUID:49D9F374-7606-4277-8AE9-FEE608FFB01E</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
    LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="SGP20001" OfferIDTime="6/25/2012 11:09:00 AM" PkgID="SGP00009" PackageVersion="" PackagePath="http://XXX.company.com/SMS_DP_SMSPKG$/SGP00004" BootImageID="SGP00004" Mandatory="0"/></ClientIDReply>
    Client Identity: 9c7f0d6a-58dd-4cda-a4f0-3f66316067fb
    PXE::CBootImageManager::FindMatchingArchitectureBootImage
    Set media certificate in transport
    Set authenticator in transport
    SMSPxe log says no errors t i can able to do pxe Log found Boot image 
    Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777230" ServerName="" ServerRemoteName=""><Machine><ClientID>GUID:49D9F374-7606-4277-8AE9-FEE608FFB01E</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
    LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="SGP20001" OfferIDTime="6/25/2012 11:09:00 AM" PkgID="SGP00009" PackageVersion="" PackagePath="http://xxx.company.com/SMS_DP_SMSPKG$/SGP00004" BootImageID="SGP00004" Mandatory="0"/></ClientIDReply>
    Client Identity: 9c7f0d6a-58dd-4cda-a4f0-3f66316067fb
    PXE::CBootImageManager::FindMatchingArchitectureBootImage
    PXE::CBootImageManager::FindBootImage: SGP00004
    Looking for bootImage SGP00004
    PXE::CBootImageCache::FindImage
    PXE::CBootImageInfo::UpdateAccessTime
    Appreciate if you could provide some solution 
    Ksrini

  • Java.sql.SQLException: File input/output error: File input/output error: re

    Hi,
    We are using JCAPS 512. We use oracle eway to connect to Oracle 10g database. But sometimes we are getting the following exception
    and suddenly all jcds stop processing. If we restart the server again job continue processing, otherwise server hangs and nothing get processed.
    Exception is as follows
    java.sql.SQLException: File input/output error: File input/output error: reading: java.io.EOFException in statement [SET TABLE EVENT_STORE INDEX '11183416 55935']
         at org.hsqldb.Trace.getError(Unknown Source)
         at org.hsqldb.Log.runScript(Unknown Source)
         at org.hsqldb.Log.open(Unknown Source)
         at org.hsqldb.Database$Logger.openLog(Unknown Source)
         at org.hsqldb.Database.open(Unknown Source)
         at org.hsqldb.Database.<init>(Unknown Source)
         at org.hsqldb.jdbcConnection.openStandalone(Unknown Source)
         at org.hsqldb.jdbcConnection.<init>(Unknown Source)
         at org.hsqldb.jdbcDriver.connect(Unknown Source)
         at java.sql.DriverManager.getConnection(DriverManager.java:525)
         at java.sql.DriverManager.getConnection(DriverManager.java:171)
         at com.stc.eventmanagement.impl.DBEventStore$EventStoreDB.addNewConnection(DBEventStore.java:359)
         at com.stc.eventmanagement.impl.DBEventStore$EventStoreDB.getConnection(DBEventStore.java:444)
         at com.stc.eventmanagement.impl.DBEventStore$EventStoreDB.executeParameterizedQuery(DBEventStore.java:777)
         at com.stc.eventmanagement.impl.DBEventStore$EventStoreDB.access$000(DBEventStore.java:250)
         at com.stc.eventmanagement.impl.DBEventStore.getEventIDsList(DBEventStore.java:133)
         at com.stc.eventmanagement.impl.DBEventStore.getEventIDsList(DBEventStore.java:115)
         at com.stc.eventmanagement.impl.EventForwarderMBean.cachePersistedEvents(EventForwarderMBean.java:728)
         at com.stc.eventmanagement.impl.EventForwarderMBean.setup(EventForwarderMBean.java:334)
         at com.stc.eventmanagement.impl.EventForwarderMBean.invoke(EventForwarderMBean.java:565)
         at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:213)
         at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
         at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
         at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
         at com.stc.eventmanagement.impl.EventManagementService.setupEventForwarderMbean(EventManagementService.java:270)
         at com.stc.eventmanagement.impl.EventManagementService.registerMBean(EventManagementService.java:147)
         at com.stc.eventmanagement.impl.EventManagementService.startService(EventManagementService.java:96)
         at com.stc.eventmanagement.impl.EventManagementResourceAdapter.start(EventManagementResourceAdapter.java:75)
         at com.sun.enterprise.connectors.ActiveInboundResourceAdapter.<init>(ActiveInboundResourceAdapter.java:94)
         at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:74)
         at com.sun.enterprise.connectors.ResourceAdapterAdminServiceImpl.createActiveResourceAdapter(ResourceAdapterAdminServiceImpl.java:269)
         at com.sun.enterprise.connectors.ResourceAdapterAdminServiceImpl.createActiveResourceAdapter(ResourceAdapterAdminServiceImpl.java:372)
         at com.sun.enterprise.connectors.ConnectorRuntime.createActiveResourceAdapter(ConnectorRuntime.java:204)
         at com.sun.enterprise.server.ConnectorModuleLoader.load(ConnectorModuleLoader.java:87)
         at com.sun.enterprise.server.ConnectorModuleLoader.load(ConnectorModuleLoader.java:108)
         at com.sun.enterprise.server.AbstractManager.load(AbstractManager.java:216)
         at com.sun.enterprise.server.AbstractManager.load(AbstractManager.java:106)
         at com.sun.enterprise.server.ApplicationLifecycle.onStartup(ApplicationLifecycle.java:183)
         at com.sun.enterprise.server.ApplicationServer.onStartup(ApplicationServer.java:295)
         at com.sun.enterprise.server.PEMain.run(PEMain.java:238)
         at com.sun.enterprise.server.PEMain.main(PEMain.java:186)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
    |#]
    Please provide some suggestions to overcome this  error
    Regards
    Venkatesh.S

    Delete the EventStoreDb.data file (its somewhere in your logical host) and restart the logical host.

  • Error file with -Dates

    In my upload program I have a selection screen which has the option to to store the failed entries or the updated entries on a error file for log so that in case there is any error it can be viewed later and rectified. I have hard coded that field in selection screen witha file name where its going to store the eroor log directly. everyday on  a daily basis . As the eror file will be run with the upload csv file on  daily basis and the eroors will be appended to the eroor file on a daily basis , I would liek to have  adate on the error file showing or separting the daily error log , Like if it was run today it showuld show the error log with todays date and when it will be run tomm , it shoule start with tommorrows date and followed by the error log.
    Thanks
    Error log - date:--03/09/2009
    jklhdladk
    agsdjkahdj
    asdgjka
    Error log- date- 03/10/2009
    hksgdhkfk
    dbkhsbfjkds
    ect
    Thanks

    Hi,
    do you mean it should be appended in the file or it should create a new file everytime with the date....
    if you mean that it should be continued in the file by appending then its pretty simple.... first upload the file in an internal table...
    keep the structure of the table as a string something like below.
    data :
    begin of wa,
      line type string,
    end of wa.
    data itab type table of wa.
    later on once you have uploaded in itab , append records in itab with new date and with the error logs,
    and then use download with itab...
    this should work....
    if you mean that it should create a new file everytime,
    then you need to just concatenate the filepath with todays_date and '.txt.
    once you cancatenate then in the download function modle pass the filename with the concatenated variable name
    Regards,
    Siddarth

  • [SOLVED] GRUB 2 - "error: file not found" after Clonezilla Restore

    Hello,
    I backed up my Arch Install which is one root partition covering the entire SDD with Clonezilla, to play around with Gentoo and FreeBSD on my Laptop.
    Now I restored the image and when GRUB 2 loads I see "error: file not found" three times for a short momemt before I'm in the GRUB 2 menu.
    When I boot my I also see these 3 messages (probably the once from the early loading process) and "Loading Linux ck kernel...." "Loading initrafms...." "Press any key to continue..." When I wait for a short time or press enter it boots like expected (fsck message appears for a short time since I'm using quite boot and I'm in KDM after that).
    Grub loading...
    error: file not found
    error: file not found
    error: file not found
    Loading Linux ck kernel...
    Loading initramfs...
    Press any key to continue...
    I did not have this when I  backed it up. It booted into the menu and when I booted the menu entry it would go black to show me the fsck message and seconds later I was in KDM.
    I tried $ sudo grub-mkconfig but it did not change anything.
    This is my current /boot/grub/grub.cfg
    # DO NOT EDIT THIS FILE
    # It is automatically generated by grub-mkconfig using templates
    # from /etc/grub.d and settings from /etc/default/grub
    ### BEGIN /etc/grub.d/00_header ###
    insmod part_gpt
    insmod part_msdos
    if [ -s $prefix/grubenv ]; then
    load_env
    fi
    set default="0"
    if [ x"${feature_menuentry_id}" = xy ]; then
    menuentry_id_option="--id"
    else
    menuentry_id_option=""
    fi
    export menuentry_id_option
    if [ "${prev_saved_entry}" ]; then
    set saved_entry="${prev_saved_entry}"
    save_env saved_entry
    set prev_saved_entry=
    save_env prev_saved_entry
    set boot_once=true
    fi
    function savedefault {
    if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
    fi
    function load_video {
    if [ x$feature_all_video_module = xy ]; then
    insmod all_video
    else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
    fi
    if [ x$feature_default_font_path = xy ] ; then
    font=unicode
    else
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
    else
    search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
    fi
    font="/usr/share/grub/unicode.pf2"
    fi
    if loadfont $font ; then
    set gfxmode=auto
    load_video
    insmod gfxterm
    set locale_dir=$prefix/locale
    set lang=en_US
    insmod gettext
    fi
    terminal_input console
    terminal_output gfxterm
    set timeout=5
    ### END /etc/grub.d/00_header ###
    ### BEGIN /etc/grub.d/10_linux ###
    menuentry 'Arch GNU/Linux, with Linux ck kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-ck kernel-true-a93fa938-f74f-477d-9573-678340bb2940' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
    else
    search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
    fi
    echo 'Loading Linux ck kernel ...'
    linux /boot/vmlinuz-linux-ck root=/dev/sda1 elevator=noop ro quiet
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux-ck.img
    menuentry 'Arch GNU/Linux, with Linux ck kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-ck kernel-fallback-a93fa938-f74f-477d-9573-678340bb2940' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
    else
    search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
    fi
    echo 'Loading Linux ck kernel ...'
    linux /boot/vmlinuz-linux-ck root=/dev/sda1 elevator=noop ro quiet
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux-ck-fallback.img
    menuentry 'Arch GNU/Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-a93fa938-f74f-477d-9573-678340bb2940' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
    else
    search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
    fi
    echo 'Loading Linux core repo kernel ...'
    linux /boot/vmlinuz-linux root=/dev/sda1 elevator=noop ro quiet
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux.img
    menuentry 'Arch GNU/Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-a93fa938-f74f-477d-9573-678340bb2940' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
    else
    search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
    fi
    echo 'Loading Linux core repo kernel ...'
    linux /boot/vmlinuz-linux root=/dev/sda1 elevator=noop ro quiet
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux-fallback.img
    ### END /etc/grub.d/10_linux ###
    ### BEGIN /etc/grub.d/20_linux_xen ###
    ### END /etc/grub.d/20_linux_xen ###
    ### BEGIN /etc/grub.d/20_memtest86+ ###
    ### END /etc/grub.d/20_memtest86+ ###
    ### BEGIN /etc/grub.d/30_os-prober ###
    ### END /etc/grub.d/30_os-prober ###
    ### BEGIN /etc/grub.d/40_custom ###
    # This file provides an easy way to add custom menu entries. Simply type the
    # menu entries you want to add after this comment. Be careful not to change
    # the 'exec tail' line above.
    ### END /etc/grub.d/40_custom ###
    ### BEGIN /etc/grub.d/41_custom ###
    if [ -f ${config_directory}/custom.cfg ]; then
    source ${config_directory}/custom.cfg
    elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
    source $prefix/custom.cfg;
    fi
    ### END /etc/grub.d/41_custom ###
    Anyone has a clue what files it is looking for? And why it doesn't boot straight away, when there is nothing that keeps it from booting up normal anyway?
    Last edited by blackout23 (2013-03-21 16:16:59)

    the.ridikulus.rat wrote:Upgrade to grub 2.00, that will give info on which file is actually missing. And then recreate /boot/grub/grub.cfg and check whether that error is gone.
    I think I'm already on Grub 2.0.0 otherwise I wouldn't have this cryptic menu configuration file.
    local/grub-bios 2.00-1
    GNU GRand Unified Bootloader - i386 PC BIOS Modules
    local/grub-common 2.00-1
    GNU GRand Unified Bootloader - Utilities and Common Files

  • Error is not getting logged in error file while running dataload maxl

    Hello All,
    I am running a Maxl to load data in a database which is running fine but noted a weird issue that the errors are not getting logged in error file. Suppose i changed the name of data file then it should give error something like
    ERROR - {Error no.} - Unable to open file {filename} which should be logged in error file but my error file is still empty.
    I am using the Maxl -
    import database {dbname} data from data_file {filename} on error append to "D:/Error/errorfile.err";
    Any inputs please...
    Thanks

    Try to use single quotes and the backslash. It may depend on the operating system and /or the version of essbase used. This is an example from one of my maxls:
    on error append to 'D:\Hyperion\logfiles\myload.err';
    cheers, chris

  • Error: "File couldn't be opened for writing" with CinemaDNG sequence

    Using a Premiere Pro > After Effects workflow with my colorist.
    I created a project in Premiere CS6 and used MOV transcodes because Premiere CS6 does not read CinemaDNG sequences. I do not have CC installed on my computer. My colorist, on his computer (we are both using Mavericks), imported the .prproj into AE CS6. We tried to replace MOV files with CinemaDNG sequences, and AE returned this error:
    After Effects error: File couldn't be opened for writing: "[file path]". ( 3 :: 0 )
    Normally when you replace footage with a CinemaDNG sequence in AE, Adobe Camera Raw pops open so you can make changes before the file is important. I have never seen this error before.
    My colorist has CC installed as well as CS6, so we tried that instead.
    Colorist opened the Premiere CS6 project in Premiere CC, creating a new Premiere CC project. Replaced MOV files with CinemaDNG sequences within Premiere CC with no error, project plays fine in Premiere CC. Finally! So we imported the new Premiere CC project in AE CC, and all linked CinemaDNG sequences appear as color bars (unlinked footage). When testing to import a CinemaDNG sequence, AE CC returned the same error as AE CS6.
    So we tried opening the same CinemaDNG files in Photoshop CS6 and Photoshop CC to see if there was an error with Camera Raw. Both versions of Photoshop open the CinemaDNG files correctly in Camera Raw (version 8.3). So now we have CinemaDNG files functioning properly in Premiere Pro, Photoshop, but... not AE?
    Tried replicating this on a second, Mountain Lion computer with both versions of AE, and returned the same issue.
    CinemaDNG files from a different source DID open in AE CC and AE CS6 on both computers, which leads me to believe there is some kind of permissions/metadata issue in this particular set of CinemaDNG files I'm using that's causing problems for AE, but NOT Premiere Pro or Photoshop. Anyone experience anything like this?

    try the "oddball problems" fix:
    http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Why does FCP error "File Not Found" when I try to open my sequences????

    I recently updated all of my software and the following day I started getting errors "file not found" when I would try to open a sequence. Now all of my sequences are being lost and I am losing time and money because I can't meet deadlines! This *****!!! With one sequence I had to reedit the entire thing from scratch and when I did for some reason the old one would then open. But the next time I opened FCP both sequences would error out. Following the "file not found" the computer responds with another error "error: out of memory" What the devil is going on with this crap?

    I seem to have figured out what my problem was. After trying to build the same project (that failed on the Mac Pro) on my laptop and encountering the same errors, I realized that the problem had to be with one or more of my assets and not my new version of FCP, since my PowerBook is running FCP 5.0.4 and my Mac Pro is running FCP 5.1.2.
    In my case the "corrupt" file was a Photoshop PSD file. In the past (FCP 4.5) I was able to use PSD files with hidden layers. I would merge the visible layers into one layer, keep the hidden layers and save the file. Once in FCP, I imported the PSD file and kept right on truckin'. I've done this for years. For some reason now with FCP 5.1.2 (and 5.0.4), that's not flying anymore. Once I "Flattened" the PSD file in Photoshop (deleting all of the hidden layers) I was able to build the project without any errors.
    Interestingly, the technique I used to figure out which file was "corrupt" also allowed me to salvage parts of some of my "lost" sequences. I saw this posted in a forum at Creative Cow (creativecow.net). Basically, I opened up the project, clicked the OK button after the File Not Found error, went into the Browser, right clicked on the offending sequence, selected "Make Offline". When I double clicked the sequence it opened in the timeline with all of my assets offline. Then in the timeline, one by one, I right clicked on each clip and selected "Reconnect Media". Once I linked up the media, if I didn't get an error message, I would save as a new project (to salvage what WAS working), and go to the next clip. I did this until I found the offending PSD files.
    I hope this helps. Now it's time to play "catch-up"
    Mac Pro 3Ghz, 1GB RAM, ATI Radeon X1900 XT   Mac OS X (10.4.8)  

  • [SOLVED] == ERROR: file not found: `/sbin/dmsetup'

    [EDIT] A much simpler way to deal with this is to explicitly ignore the kernel update during a full system update:
    pacman -Syu --ignore linux
    Then explicitly update the kernel alone:
    pacman -S linux
    [EDIT] First, after a full system update I had to move the STUB kernel image from the UEFI directory back to /boot, them recreate the images a second time. The systemd service moved it back to the UEFI directory.
    [EDIT] The use of 'mdadm_udev' in HOOKS= also seems to be no longer just 'preferred' to the 'mdadm' hook but instead is now mandatory.
    I've read the news item...
    Changes to LVM
    2013-02-12 - Thomas Bächler
    With lvm2 2.02.98-3, we now utilize lvmetad to activate LVM volumes automatically. This implies the following changes:
        The lvm2 initramfs hook now requires the udev hook.
        The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
        You can restrict the volumes that are activated automatically by setting the auto_activation_volume_list in /etc/lvm/lvm.conf. If in doubt, leave this option commented out.
        If you need monitoring (needed for snapshots), run systemctl enable lvm-monitoring.service.
        The lvmwait kernel command line option is no longer needed and has no effect.
    If you run pacman -Syu and update device-mapper, linux and lvm2 at the same time, you will get an error message that /sbin/dmsetup is missing. Run mkinitcpio -p linux again after the update to avoid any problems.
    ...and I do get the message...
    ==> ERROR: file not found: `/sbin/dmsetup'
    ...but after a full system update with...
    pacman -Syu
    ...when I execute...
    mkinitcpio -p linux
    ...this is what I get...
    Building image from preset: 'default'
    /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    ERROR:specified kernel image does not exist: `/boot/vmlinuz-linux'
    Building image from preset: 'fallback'
    /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    ERROR:specified kernel image does not exist: `/boot/vmlinuz-linux'
    So of course if I reboot I get the dreaded 'No volume groups found' message.
    I should mention that I use the systemd path and service to move the kennel after it has been updated.
    Last edited by KairiTech (2013-04-07 02:45:12)

    With lvm2 2.02.98-3, we now utilize lvmetad to activate LVM volumes automatically. This implies the following changes:
        The lvm2 initramfs hook now requires the udev hook.
        The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
        You can restrict the volumes that are activated automatically by setting the auto_activation_volume_list in /etc/lvm/lvm.conf. If in doubt, leave this option commented out.
        If you need monitoring (needed for snapshots), run systemctl enable lvm-monitoring.service.
        The lvmwait kernel command line option is no longer needed and has no effect.
    Just to confirm. You did all these steps, right?
    EDIT: I just noticed something:
    KairiTech wrote:HOOKS="base udev autodetect sata mdadm usbinput keymap encrypt lvm2 filesystems timestamp shutdown"
    Replace
    mdadm
    with
    mdadm_udev
    . Maybe this is nothing, but it is recommended to use this one instead of the other.
    NEW EDIT: Expecially this one
    The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
    Last edited by s1ln7m4s7r (2013-03-24 20:42:55)

  • Error File not Found in CS 5.5

    When I go to open up PP CS 5.5 it provides a list of possible projects I can open up. Click on a project and it opens accordingly. However, over the past 2 days it has become problematic. I can click on the listed project but I now receive an error message: Error file not found. PP will not open up. I haven't moved any files, folders or projects around. I have simply closed the project, quit PP and then opened it again when wanting to edit. I have tried opening up the auto saved project file and I receive the same message?

    Hi Todd both your solutions (and the one suggested by Colin) works initially. Dbl click the project file and it opens PPro.  However, I tried this on another project which has a 3rd party pllugin (Smartsound Sonic Fire Pro) in it. Things get interesting with Smartsound being activated with me unable to quit out of it and I am not able to access Premier Pro. I have to Force Quit both programs. Then when I try to dbl click on the program that opened up OK the error message returns: File format not supported. There is no Smartsound file involved in this project? Same thread? New thread? many thanks for your responses

  • The dreaded "Video Error-File Not Installed" When trying to watch LiveTV in WMC

    I'm getting the following error message when trying to use Live TV in WMC:
    Video Error
    Files needed to display video are not installed or are not working correctly. Restart Windows Media Center or restart the computer.
    On this system my tuners are the Hauppauge HVR 2250 and the Hauppauge HD PVR.  It took awhile to set up, but when I click play on a channel I get 10 seconds of video, an audio loop of the same sound over & over followed by the above error message.
    I ran into this problem once before on my Home Theater HTPC when trying to access the ATI Cable Card solution.  To get that to work I had to uninstall and reinstall Playready.  I tried 3 different ways of doing this on my new build & it did
    not fix the problem.  The only fix I didn't try was the one on Ceton's website that involves a whole lot of deleting of folders.
    Since this current build doesn't have a cablecard installed, and gets the non-clear QAM stations from settop box through HD PVR, would it still be the Playready needing to be reset?  The symptoms look identical to when I had the previous problem.
    These same files play in the BeyondTV that I'm trying to migrate from, so all codecs appear to be onboard.  I am using the latest HDPVR MediaCenter driver from the Hauppauge website & the latest drivers on the HVR-2250.
    Thanks for any help!

    I had this problem after upgrading my graphics card to an AMD 5450 and the solution after a couple of days of hair pulling was one I hadn't come across before in relation to this problem.
    It turned out that the problem was caused by the screen refresh rate, it was set to 60Hz by default and I got the Video Error message but if I changed it to 50Hz then playback of recorded programs or watching live TV worked.

  • [solved] 'ERROR: file not found:' when running 'mkinitcpio -p linux'

    $ sudo mkinitcpio -p linux
    ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    ==> Starting build: 3.13.5-1-ARCH
    -> Running build hook: [systemd]
    ==> ERROR: file not found: `'
    ==> ERROR: file not found: `'
    ==> ERROR: file not found: `'
    ==> ERROR: file not found: `'
    ==> ERROR: file not found: `'
    ==> ERROR: file not found: `'
    -> Running build hook: [autodetect]
    -> Running build hook: [modconf]
    -> Running build hook: [block]
    -> Running build hook: [filesystems]
    -> Running build hook: [keyboard]
    -> Running build hook: [fsck]
    -> Running build hook: [consolefont]
    -> Running build hook: [keymap]
    ==> Generating module dependencies
    ==> Creating cat initcpio image: /boot/initramfs-linux.img
    ==> WARNING: errors were encountered during the build. The image may not be complete.
    ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    ==> Starting build: 3.13.5-1-ARCH
    -> Running build hook: [systemd]
    ==> ERROR: file not found: `'
    ==> ERROR: file not found: `'
    ==> ERROR: file not found: `'
    ==> ERROR: file not found: `'
    ==> ERROR: file not found: `'
    ==> ERROR: file not found: `'
    -> Running build hook: [modconf]
    -> Running build hook: [block]
    ==> WARNING: Possibly missing firmware for module: aic94xx
    ==> WARNING: Possibly missing firmware for module: smsmdtv
    -> Running build hook: [filesystems]
    -> Running build hook: [keyboard]
    -> Running build hook: [fsck]
    -> Running build hook: [consolefont]
    -> Running build hook: [keymap]
    ==> Generating module dependencies
    ==> Creating cat initcpio image: /boot/initramfs-linux-fallback.img
    ==> WARNING: errors were encountered during the build. The image may not be complete.
    Things seems to work, but I'm a bit worried.
    It has just started. PS/2 atkbd stuff went fine.
    journalctl shows
    Feb 26 22:36:09 localhost systemd-udevd[62]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
    Feb 26 22:36:09 localhost systemd-udevd[63]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
    Feb 26 22:36:09 localhost systemd-udevd[64]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
    Feb 26 22:36:09 localhost systemd-udevd[65]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
    Feb 26 22:36:09 localhost kernel: sda: sda1 sda2 sda3 sda4
    Feb 26 22:36:09 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
    Feb 26 22:36:09 localhost systemd-udevd[66]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
    Feb 26 22:36:09 localhost systemd-udevd[67]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export
    I'm using [testing] but I don't know if it matters.
    What should I post?
    Last edited by karol (2014-03-15 15:03:56)

    The systemd build hook looks like this:
    build() {
    local rules unit
    # from base
    add_binary /bin/mount
    add_binary /usr/bin/kmod /usr/bin/modprobe
    # systemd
    add_binary /usr/lib/systemd/systemd /init
    add_binary /usr/bin/systemd-tmpfiles
    # generate sysroot.mount and sysroot-usr.mount
    add_file "/usr/lib/systemd/system-generators/systemd-fstab-generator"
    # udev rules and systemd units
    map add_udev_rule "$rules" \
    50-udev-default.rules \
    60-persistent-storage.rules \
    64-btrfs.rules \
    80-drivers.rules \
    99-systemd.rules \
    map add_systemd_unit \
    ctrl-alt-del.target \
    initrd-cleanup.service \
    initrd-fs.target \
    initrd-parse-etc.service \
    initrd-root-fs.target \
    initrd-switch-root.service \
    initrd-switch-root.target \
    initrd-udevadm-cleanup-db.service \
    initrd.target \
    kmod-static-nodes.service \
    sockets.target \
    [email protected] \
    systemd-journald.service \
    systemd-tmpfiles-setup-dev.service \
    systemd-udev-trigger.service \
    systemd-udevd-control.socket \
    systemd-udevd-kernel.socket \
    systemd-udevd.service
    add_symlink "/usr/lib/systemd/system/default.target" "initrd.target"
    # libdbus needs the passwd info of the root user
    # TODO: make sure this is no longer necessary when systemctl moves to sd-bus
    add_file "/etc/nsswitch.conf"
    add_file "/etc/passwd"
    add_binary "$(readlink -f /usr/lib/libnss_files.so)"
    # udev wants /etc/group since it doesn't launch with --resolve-names=never
    add_file "/etc/group"
    Do all of those files exist on your sytemd? I'm not running testing nor systemd in my initrd, so I can't do much checking.
    Edit: You're not the only one. Bug report: https://bugs.archlinux.org/task/39059
    Last edited by Scimmia (2014-02-27 06:59:55)

  • Error: file not found

    Hello,
    I am using a labview program which already exists. The program
    inputs a file ( txt file with some numerical data) and gives the output
    file at the required location after performing some calculations to it.
    The problem is when I input my file path and run the program it always
    gives an error ' file not found'. Please help me.
    Thanks
    Laxmikanth

    Hi Laxmikanth,
    Some more info would be helpful. Such as posting a image of your program, which version of labview, platform etc.
    that being said if you are literally typing in the filepath that is the most likely source for the error. Is there a browse button visible to the right of the filepath control? If not try right clicking and under the visible menu make sure the browse button is selected. Then click on the browse button and find/select your disk file. Now run the program and see if you get the same error.
    Cheers,
    --Russ

  • Error : file not found in SharePoint 2010

    I have a problem of error "file not found" in a site collection SharePoint 2010.
        I cannot access to home page, the page of list/library/permission,etc. All pages will appear an error "file not found"
        I can access to the page of "all content"
        I can access to the site setting page, but I cannot open the link on this page. For example, I select "quick launch" in "Look and feel" section, it will show an error "file not found".
        I think I must reset my master page, but I cannot use SharePoint Designer (forbidden in my application), I cannot open the link on site setting page, and I cannot open library page to check the master page
        I can access to mobile view, and all pages work well in mobile view, but I did not find site setting page
    How could I check the master page? Or this problem has other solution?
    Thank you in advance.

    You might have referred an image or style sheet or some file from an invalid path. Check the error in detail, where you might be able to know which file or file path is not correct. Then recorrect it in the master page and then refresh the site.
    UPDATE - Can you configure the web.config to display the detailed error? Make -
    <CustomErrors Mode="Off">, CallStack="true" and
    <compilation debug="true" />
    Do an IISReset and then refresh the site.

  • "Error in creating error file" message

    Tried to install Palm Desktop 6.2 that came with my new Centro and at the end the message "Error in creating error file" keeps popping up numerous times.
    What can be the reason?
    Post relates to: Centro (AT&T)

    I was also experiencing the "error in creating error file" message multiple times during installation on my XP Pro system. I googled the error message and found this post plus a reference to a problem with riched32.dll) in in another post. But that didn't help. After quite a bit of troubleshooting on my own, I found the problem. I had moved the "My Documents" folder under "D:\users" to simplify my backups. Apparently the Palm installer needs the "My Documents" folder on the C: drive. I temporarily put "My Documents" back into it's default location under "C:\Documents and Settings" and the Palm installer ran just fine with no error message. I then moved everything back under "D:\users" including the folder "Palm OS Desktop", that was created by the Palm installer and everything has been working fine since.
    Thought I'd share this with others, as it's not an obvious fix.
    Post relates to: Palm TX

Maybe you are looking for