C+470
Dear All,
While making MIGO, I am getting error tht "Missing connection of material in plant to the material ledger
Msg: C+470
Can anybody plz tell me where to do this configuration of material with ML
Regards,
Ramesh Guthula
Check in OMX1 and CKM9 , also cross check if the material accounting view, the ML act is ticked or not.
Similar Messages
-
I have an IPAD 2 and would like to print to my mobile printer HP 470. Can I use the patch cable? What do I need to do?
iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
Cheers, Tom -
Why don't all my contacts and calendar events on my iMac (version 10.7.4) stream onto iCloud? For instance, there are 470 entries in my address book but only 270 on iCloud. And not all my appointments in iCal are transferred either.
I have the same problem transfering Address book on iMac to contacts on iPhone (old version 3G - on iCloud). this is a hard wired connectionMight you have 200 entries in On My Mac groups and some of your appointments in On My Mac calendars?
-
Need advice on how to use a samsung 470 128gb ssd in laptop win 7, please
hello,
i have a laptop with 2 hdd's running win 7 64 bit with 8gb of ram
i thought about installing 2 10k drives, but that would heat the laptop up
and drain battery life quickly
so
i found the samsung 470 ssd series to use for the os drive
and have questions that i cannot find answers to
(either from the web or samsung's website)
reading this link about 'shortstroking' the ssd
http://www.ocztechnologyforum.com/forum/showthread.php?67119-Short-Stroking-SSD
my os only uses 40gigs (and i haven't really, really gone through it to delete bloatware)
at most i see myself using 80 gigs of the 128gig model
1) should i 'not partition' the drive and let everything be as it may
or
should i create a 90 gig partition, thus 'shortstroking' it to try to gain more performance?
2) should i locate the static page file on the ssd
or
locate it on the 2nd hdd media drive?
is anyone doing this or have advice?
thanks again for your help
jhello Frederic,
first of all thanks a ton for the calibration info
that was excellent!
it's an hp laptop with a removable optical drive of which
i installed a 2nd hdd for media
i just found the corsair ssd you mentioned at newegg
and 57% of the reviews are terrible
whereas 100% of the reviews for the samsung are 5 eggs
(they say the samsung isn't the fastest but it is the most sturdiest)
it has a sataII interface
i agree with you about not defragging ssd's
thanks for the answer about not partitioning and locating the pagefile...
my desktop at home has 2 sata3 ports...
after all this research i think i might get the 128 gb ssd for my desktop
which leads me to another question about the laptop:
my os drive is 40gb
i don't see it getting much bigger than that
in terms of installing programs
do you think i could 'get away with' installing a 64gb ssd in the laptop
or will it fill up or run slow because of the limited headroom?
i think it is better to go with a highly stable ssd than a tempermental faster ssd
thanks for answering,
j -
Officejet H 470 windows 8.1 driver fails to install
I downloaded the full feature software driver for windows 8.1 for my officejet H 470.
When I run the downloaded exe file the software "cannot find the file" and closes out. it doesn't ask for a CD. It is looking in a temporary file on my harddrive. If I close the message the software closes down and the driver doesn' install. if I ignore the box nothing happens -- the software continues to look for the missing file for ever....
What is the solution?Cheetah12: thank you for your interest in my problem.
I went back to the supermario advice. If isn't for the same printer nor the same missing file. My missing file is:
File Name: C:\Windows\system3hpzprl40.exe -inf-mPreload_Drivers\Msiexec.exe
However, I did try some of the advice. I ran the L3uninstall.bat [twice]. I definitely do not have any of the old printer files on my new laptop.
I tried to reinstall the updated driver from the HP website and it still will not install.
I have also run the disk cleanup in "administrative tools" [Supermario wrote in "System tools"]
Nothing has worked. I have rebooted my laptop as required and tried installing the driver from HP and I still get the same issue . I have a screen shot of the box if it is of interest to you. -
Hi experts.
While I am doing SAP R3 upgrading now, from 470 to 6.0, but seems the upgrade program got stuck on the phase of TAB_IMP in downtime. It takes more than 15 hrs without and logs writed or and CPU occupied... The latest changed log was oracle's alert log which 10 hrs before..
I have no idea how to deal with this cause there were no error... no warning....
My OS system was NT 2003 with 32bit. It was 4 CPUs with 8G memory.. the oracle is 10.2.0.2, is this may caused by the version of oracle?
Anyone who can gives me some suggestions will be much more than thanks!Hi,
My OS system was NT 2003 with 32bit.
it is due to 32bit Os and you are going for upgrade to ECC 6.0 with EHP4.
There is some pool table updation which take lots of tme due to 32bit operating system.,
Its better to upgrade you OS from 32bit to 64bit and Oracle 32 bit to 64 bit before SAP upgradation.
Thanks
Anil -
PU19 Form Problem Caused By Diff between 470 & ECC 6.0
In 470 when you you generated the SUI Wage Reporting form/report it came out in a regular report format generated by an ABAP Write statement. This version was easy to save as a TXT file and then use EXCEL to read the TXT file and massage it. In ECC 6.0 this report is now in PDF format and my user wants the ability to do the same thing, but so far I haven't found a solution. You can save a PDF file as TXT, but you get all the formatting from your PDF and it would require way to much work to try and reformat it into something useable. You can still click on SYSTEM-LIST-SAVE, but all the choices are greyed out. Does anybody have any idea on how to solve this problem?
I'm not sure if you still need this or if your user has gotten used to the new way of doing things, but if you extend the validity date of the form you used to output in table T5UX7, you should be able to produce the older version of the wage list. You can get to the table via the IMG: Payroll > Payroll USA > Tax Reporter > Tax Form Definition > PDF Based Forms > Define Validity Dates and Form Parameters.
Something else that we've done in the past for our users was to download the TemSe file into Excel and create a macro to parse and filter on the EE detail records.
Hope this helps!
Ann -
Deae Experts,
we are developing a customized report on TDS for a particular month.
For this we need to extract the amounts of /460,/4MT,/4ME,/4MH and /470 wagetypes.
How and where we have to extract/fetch the amounts to have these values in the customized report.
Please advice.
Regards,
Vi SaiHi Experts,
I want to extract the above details after payroll posting to accounts.
I have tried to have the details form PCP0,there i can only view the /460 details.But the rest of details i can able to see.
Where shall and from which trasaction code(Any Finance trasaction code) we extract the amounts of /460,/4MT,/4ME,/4MH and /470 for the employees.
Please advice.
Regards,
V sai. -
LGWR (ospid: 3728): terminating the instance due to error 470
Hi Guru's,
Am running on 11.2.0.1 on Windows XP SP 3 and suddenly this morning my database is unable to startup open, although it can mount without a problem.
The alert log says:-
Tue Apr 19 11:12:18 2011
ALTER DATABASE MOUNT
Tue Apr 19 11:12:21 2011
Sweep [inc][249690]: completed
Sweep [inc2][249690]: completed
Successful mount of redo thread 1, with mount id 216676754
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: ALTER DATABASE MOUNT
Tue Apr 19 11:12:22 2011
ALTER DATABASE OPEN
Errors in file c:\oracle\diag\rdbms\tznprn\tznprn\trace\tznprn_lgwr_3728.trc (incident=250890):
ORA-00600: internal error code, arguments: [3700], [1], [15], [3], [2], [], [], [], [], [], [], []
Incident details in: c:\oracle\diag\rdbms\tznprn\tznprn\incident\incdir_250890\tznprn_lgwr_3728_i250890.trc
Errors in file c:\oracle\diag\rdbms\tznprn\tznprn\trace\tznprn_lgwr_3728.trc:
ORA-00600: internal error code, arguments: [3700], [1], [15], [3], [2], [], [], [], [], [], [], []
LGWR (ospid: 3728): terminating the instance due to error 470
Instance terminated by LGWR, pid = 3728
I have checked everything from the network settings to the listener,tns and sqlnet files and all seems to be fine.
The trace file says:-
Incident 253290 created, dump file: c:\oracle\diag\rdbms\tznprn\tznprn\incident\incdir_253290\tznprn_lgwr_3548_i253290.trc
ORA-00600: internal error code, arguments: [3700], [1], [15], [3], [2], [], [], [], [], [], [], []
error 470 detected in background process
ORA-00600: internal error code, arguments: [3700], [1], [15], [3], [2], [], [], [], [], [], [], []
*** 2011-04-19 11:28:03.765
LGWR (ospid: 3548): terminating the instance due to error 470
Please help me out.Hi;
You are hitting ora 600 error which mean oracle internal error.Please check below note if its not help i suggest rise sr
Troubleshoot an ORA-600 or ORA-7445 Error Using the Error Lookup Tool [ID 153788.1]
Regard
Helios -
please help me
as it says at the top my ipod is dissabled and it says try again in 22,470,652 minPlace the iPod in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Samsung SSD 470 and Macbook Late 2007
Hi all,
today I wanted to replace the internal HDD of my white macbook 3,1 late 2007 with a Samsung SSD 470 series 64 GB.
Unfortunately, disk utility doesn't "see" the device, so I can't use it. I tried both booting from the Snow Leopard DVD and
the Lion USB-Stick, to no avail. The drive just doesn't show up in disk utility at all.
So I installed it in an external firewire enclosure and that was fine. I could install Lion on it, no problem, so I guess the
hardware is fine. Afterwards, I re-installed the drive on the internal SATA port, but the system can't find a boot device.
I also booted from a Win 7 DVD, but again, the drive doesn't show up as a possible destination for installation.
I checked the firmware revision of the SDD, and it's the latest that's available from the Samsung web page.
Any help here? I guess I'm at loss right now...
Thanks,
JDKDID IT !!!
Salut Jochen !
It is working... but what a struggle.
The ingredients are :
- 2 computers including your macbook
- 1 standard hard drive (best have a new one or one with no OS ever installed on it)
- your SSD drive
- 1 DVD
- Superduper software
So the steps are :
- Make a "Lion clean install DVD" (good tutorials) on computer 1.
- Install the "standard hard drive" in your macbook
- Then clean install Lion via the brand new DVD.
- Now you have Lion on your Macbook... but you want it on a ssd.
- Put your SSD in a Hard drive case to make it an external drive.
- Plug it on your computer 1, format it (erase it)
- Now plug your macbook on computer 1 too and restart it by holding the T key (Target mode)
- On computer 1 you will have your SSD Drive and Macbook as 2 external drives mounted on the desk.
- Superduper or clone your Mackbook on your SSD.
- Open your Macbook and replace standard drive by SSD.
- Switch on your Macbook ! It works fine for me.
- The start is odd it is quite long before the Apple logo pops up but then after it is just sheer madness...
Well I hope you will be able to do it too. It took me hours.
The main problem is using a drive that had Lion on it because it won't let you clean install since Lion is implanting a Fantom partition that makes the whole ssd thing complicated. Hopefully I did'nt have to use Terminal tricks..it just worked fine.
Best regards,
Joffrey -
Time machine slow - 470 days to backup 150GB
Just installed a brand new 2TB for use with my wife's Mac Air. Time machine telling me it will take 470 days to backup...
I'm new to this, but that seems a little crazy. Tried restarting computer, no luck. CPU running 92% idle...
Any pointers where to start looking, what to try next?
ThanksThe backup file size is 1.67 TB.*
That's across the internal bus of a 2009 quad-core Mac Pro - which is pretty fast.
Copying an hour's worth of MPEG-2 HD takes about a minute.
I do a fresh backup from scratch about once a year, and the last time it finished over night.
This time the first Time Machine backup is only about 1/5 complete after many days, and Activity Monitor shows essentially no use of disk drives or of CPU. And in the first note I pointed out what is gleaned by using Terminal to execute the UNIX ps command. The priority of the running Time Machine process looks incorrect to me.
I could be wrong, but I think the problem is process priority, not file size.
I am unable to set priority to 0 or a negative number. Can someone straighten me out on how to do that?
[*The machine has four 1.5 TB disk drives in it plus lots of memory. Two of the physical drives are configured as one 3 TB backup drive (RAID concatanated).] -
How can I find a vendor for pricing and purchase of a Photosmart 470?
I cannot find a dealer with this preoduct.
HP says it is not available for on-line pruchase!
Price and availability? Similar product: Photsmart A637?Hi,
The Photosmart 470 series is an older model and no longer being sold as a new product. If you are just looking for a small photo printer, you can find models like the Photosmart A646 and A636 from vendors outside of hp.
Or, if you are looking for a quality photo printer in general, take a look at the Photosmart product line available at www.shopping.hp.com. You can compare models and see what each has to offer. These products offer functionality over the photo printers (like the 470/A646/A636), like wireless capability, scanning, etc.
You can take a look at the Photosmart line at:
http://www.shopping.hp.com/webapp/shopping/can.do?landing=printer&category=Photosmart&catLevel=1&sto...
Happy shopping and thanks for your interest in hp!
Thanks!
Tara
**Although I am an HP employee, I am speaking for myself and not for HP. -
Probook 470 G1 touchpad problem - NOT SOLVED with SP64284
Hello,
my touchpad is problematic.
It registers movement but often misses a click, also hangs from time to time.
I have installed SP64284 but the problem remains.
Please help,
Miljan
(HP Probook 470 G1)Hi,
have the same problem :/
i took my laptop to the store and they replace the touch pad...no improvements at all. Its interesting that if you put your hand on right side of the touch pad ( low pressure on plastic) its even worst...
Have the same hp probook 470 g1
Anže -
Dear all.
I have another Question, is there any note that explain why its not possible to install this solution (ADS - Adobe Document Service) and the JAVA Instance in the same AP server here the 470 R/3 version is instaled.
Example:
Solutions 1:
- 470 R/3 - ABAP Instance - AP1
- SAP NETWEAVER 2004s SR2 - JAVA Instance - AP1
Solutions 2:
- 470 R/3 - ABAP Instance - AP1
- SAP NETWEAVER 2004s SR2 - JAVA Instance - AP2 (New AP, only for ADS)
Best Regrads
Thanks in advanced
Pedro Miguel RodriguesHi,
Why dont you check the config docs in www.service.sap.com/adobe ?
Regards,
<i><b>Raja Sekhar</b></i> -
11.0.3.470 MSI download?
I've tried to download the lastest version 11.0.3.470 from
the distribution page, but there still version 11.0.0.0 is
available. I've filled out a new license agreement but also on the
new download page, only the inital version is available. Is there
really no possibility to get the latest build 470 for internal
distribution as MSI file?Im getting the same thing. (XP SP3 French with latest update
to Dec 5 2008)
I installed firefox 3.0.4 and tryed to get shockwave player
with it.
It allowed to download the slim version
(Shockwave_Installer_Slim) 4.35meg.
I assumed that with a local copy of shockwave, I could
install it and it does install. I even check my hard drive and I
see it installed.
But I still cant play any shockwave content in either firefox
or IE.
I tryed a new profile on the same machine with the same
result.
I tryed to install it on another machine and still getting
this same issue.
At this point I remembered that with Adobe Captivate 3, in
order for it to install on XP French version, I had to go into the
regional setting and set everything to english US and apply to all
profile. That was the undocumented Adobe fix that I got from a lvl3
system engenere at Adobe. Anyways, I tryed that and still can't
install the shockwave player.
I think I cover my side pretty well. I hope Adobe come up
with some answer pretty soon.
Maybe you are looking for
-
MacBook Pro to TV via VGA to Components gives garbled image
Hello everyone, I'm the proud owner of a new unibody MacBook Pro and so far I'm loving it. There is, however, one problem. I would really like to connect the MBP to my HD TV, which happens to be a Sony FD Trinitron WEGA. At first I bought the Apple m
-
Error in BI at Transformation after migration from BW Rule (target :ZDTAPAK
Hello Gurus, I have migrated datasource from BW to BI. The update rule from BW against transformation in BI has routine. I see an error messgae in "Transformation Display"(screen). error msg is Rule (target :ZDTAPAKID, group:01 standard Group): sy
-
Issue running VGA TV with Macbook Pro
Hi all, been a while since I've asked anything around here, hope I can get some help. I'm trying to connect my Macbook Pro (late 2011) to our Sony Bravia 40" LCD TV (model# KDL-40V5100 if its needed) through its "PC" (i.e. VGA) input. I got a Mini Di
-
ALV Grid multiple row selection, disabling some
Does anyone know if it is possible to have an ALV grid with multiple row selection allowed but for some rows the row selection is disabled? Kind regards, John.
-
I work for a company that requires me to connect to several customer Cisco VPNs via AnyConnect 3.0.5075. Each customer site has provided it's own URL and certificate, etc. How do I get Cisco AnyConnect Secure Mobility Client version 3.0.5075 to agre