C/O dosent carry over along with billto to part func. using custom Creat SO

Hi Gurus!
We have a custom program to create sales order ZVA01 which creates sales oder. When using that program , we eneter the sold to , the bill to party carries over to the partner function and everything else carries forward except the C/O(Care off) dose not carry forward. I have checked with the MDM group and its all set up correctly . When using the trabnsaction VA01 to create sales order it does carry over everything to the partner function even the C/O. We need to use this cutom program for a specific purpose so using VA01 is not teh solution to our problem. I would like to know why everything except the c/o part is not getting carried over. Could anyone please tell me what maybe the reason for c/o not to carry over in my custom transaction to create sales order.
Thanks

You have my deepest sympathy. I can't imagine anyone trying to replicate SAPMV45A modules into a custom program, although I once removed about 20-30K lines of "cloned" SD code, replacing it with standard SAP with exits, transaction variants and variant transactions. Or, perhaps you've just written a front-end that executes VA01?
Obviously, you've missed something in SAPMV45A partner functions. I think you'll have to find that and replicate to get the missing partner(s). What you've encountered is a spectacularly good example of why not to attempt to "re-write" standard SAP functionality, IMHO.

Similar Messages

I had been using iMessage all along with my friend who is using an iPhone 6. I choose to send a sms to him as I do not have any connection, after that there is no way I can send him an iMessage again. Can anyone advise how do I switch back?

I had been using iMessage all along with my friend who is using an iPhone 6. I choose to send a sms to him as I do not have any connection, after that there is no way I can send him an iMessage again. Can anyone advise how do I switch back? I had tried resetting the network setting, toggling off the sms but to no avail.
Thank you.
Regards

What do you mean you choose to send him an SMS because you don't have any connection. What kind of connection? Delete the thread with that individual that you sent via SMS, and as long as you have iMessage activated on your device and your friend has an active data connection, it should recognize that and send as an iMessage. Another scenario is to have the friend send you a message that you can respond to.

How to send URL link along with text in an email using FM.

Hi Experts,
I am sending an e-mail for status notifications.
In the mail, the user will clik on the URL to do actions through the link.
Ex:
Dear,
Please go through the link htttp://appear.upload/records/update.
When user clicks on htttp.... url it should open the portal.
I am sending text mails but unable to open the site url action .
Regards,
prasad

Hi ,
Pls check below link.
http://wiki.sdn.sap.com/wiki/display/ABAP/SendingMails-HomePage

How to populate the xml file into the treeview using c#(along with the attribute called id) using dom.

<?xml version="1.0" standalone="yes"?>
<Student_Details>
<Student Id="1">
<Name >sandeep</Name>
<Age>12</Age>
<Mobile>123456789</Mobile>
</Student>
<Student Id="2">
<Name >ololjk</Name>
<Age>kjlokmo</Age>
<Mobile>njonojniohuj</Mobile>
</Student>
<Student Id="3">
<Name >Sandeep Pr</Name>
<Age>12</Age>
<Mobile>9865231870</Mobile>
</Student>
<Student Id="4">
<Name>ololjk</Name>
<Age>kjlokmo</Age>
<Mobile>njonojniohuj</Mobile>
</Student>
<Student Id="5">
<Name>ololjk</Name>
<Age>kjlokmo</Age>
<Mobile>njonojniohuj</Mobile>
</Student>
<Student Id="6">
<Name>ololjk</Name>
<Age>kjlokmo</Age>
<Mobile>njonojniohuj</Mobile>
</Student>
<Student Id="7">
<Name>ololjk</Name>
<Age>kjlokmo</Age>
<Mobile>njonojniohuj</Mobile>
</Student>
<Student Id="8">
<Name>ololjk</Name>
<Age>kjlokmo</Age>
<Mobile>njonojniohuj</Mobile>
</Student>
<Student Id="9">
<Name>ololjk</Name>
<Age>kjlokmo</Age>
<Mobile>njonojniohuj</Mobile>
</Student>
<Student Id="10">
<Name>ololjk</Name>
<Age>kjlokmo</Age>
<Mobile>njonojniohuj</Mobile>
</Student>
</Student_Details>
Sandeep Puvvadi

Have a look at the
XmlDocument class. Read the
documentation (it's all written there for us all). If you'll have implementation questions, feel free to ask again. At the moment, I can't see what you've already tried and what's not working.
Armin

Problems with some web parts when using XSLT

I have a page on which I have several web parts. Some web parts are custom while others are OOB and only XSLT is applied on them.
I am using 2 WFEs with NLB. Problem is when I do iisreset on one of the WFE then the OOB web parts with XSLT start giving error. You know the standard error "corelation ID....bla bla bla". Anyway the error automatically goes away after a 2, 3 minutes.
So basically if I do iisreset or stop the iis, and then load that page, then all custom web parts load fine except those OOB web parts with XSLT. And then they too start working fine after 2, 3 minutes if I reload page.
What could be the reason for that? Looks like some service on which XSLT depends take time to load!? And once that service is loaded then they start working fine? Or it could be due to distributed cache or something!?

Hi Frank,
Which version of the SharePoint 2010 did you use?
In June 2011 CU code was added to the DataFormWebPart (which is used to display list data) that if an XSLT transform took longer than 5 seconds, a StackOverflowException was thrown. This was done to avoid
a potential Denial Of Service attack on SharePoint if crafted XML could be sent that would continually clog up the XSLT, thereby stopping pages from rendering.
In August 2011 CU the transform "timeout" was reduced from 5 seconds to 1.
So, any list with XSLT that takes longer than 1 second to parse in an XSLT transform goes *boom*.
After you perform an IIS reset , the cache of the page was cleared and you encountered the error. Once the page is cached, there is no error.
You can try to set up XSLT Timeout with the following PS commands:
$farm = Get-SPFarm
$farm.XsltTransformTimeOut = 5
$farm.Update()
Reference:
http://social.msdn.microsoft.com/Forums/sharepoint/de-DE/44cfd798-be7a-4436-8786-bd44049e7def/sp2010-column-filter-causing-unable-to-display-web-part-error-and-a-stack-overflow-exception?forum=sharepointgeneralprevious
Best Regards,
Eric
Eric Tao
TechNet Community Support

Problems with JBO errors displaying when using custom insert VO methods

Hi!
I have a problem I hope I can explain :).
I have a VO that has custom execute and insert methods implemented in application module.
public void executeWithParamsMyViewG(String asID)
    // find the view
    MyViewImpl loMyViewImpl =
      getMyViewG();
    loMyViewImpl.setNamedWhereClauseParam("IDParm", asID);
    // execute the querry
    loMyViewImpl.executeQuery();
public void insertRow(String asID)
    MyViewImpl loMyViewImpl =
      getMyViewG();
    // create new row
    Row loRow = loMyViewImpl.createRow();
    // set fields in new row
    loRow.setAttribute("ID", asID);
    loRow.setAttribute("MyAttribute", "A");
    loRow.setAttribute("MyAttribute2",
                       afContext.getProcessScope().get("MyParm"));
    // insert new row
    loMyViewImpl.insertRow(loRow);
}I have custom error handler with
    public void reportException(DCBindingContainer bc, Exception ex) {
       //Force JboException's reported to the binding layer to avoid
       //printing out the JBO-XXXXX product prefix and code.
      disableAppendCodes(ex);
      super.reportException(bc, ex);
    private void disableAppendCodes(Exception ex) {
      if (ex instanceof JboException) {
        JboException jboEx = (JboException) ex;
       jboEx.setAppendCodes(false);
        Object[] detailExceptions = jboEx.getDetails();
        if ((detailExceptions != null) && (detailExceptions.length > 0)) {
          for (int z = 0, numEx = detailExceptions.length; z < numEx; z++) {
            disableAppendCodes((Exception) detailExceptions[z]);
    }I also have custom phase listener and page lifecycle but without any 'important' methods overridden.
Than I have a jspx with af:processChoiceBar for navigation, Create button binded to insertRow method, commit and rollback buttons and form with input fields. One of them is required, but with validation on server side, not on client side (showRequired instead of required).
My problem is this:
If I add an empty row, leave all the fields blank and try to commit I get required field message, which is OK. But if I use af:processChoiceBar (previous page, next page, select any of the pages), the message is not displayed. The message is displayed after when I try to return to this page. If I debug the exception in reportException method has the code 27024 for DeferredRowValidationException, not the required attribute error which is displayed.
Can anyone help me with this please, I've wasted a lot of time on this now.
Regards!
BB

Hi,
Does anyone know why this would not be working. It's really irritating!

Need to move website with different mac than one used to create it

I created my web page years ago in another mac. I can't update it anymore, but now I need to move it and can't use the old mac. Help pls. web: www.jillnanfeldt.com

If you don't have the domain file that was used by iWeb to create the site you'll have to recreate it from scratch.
Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the creation of the new site.
OT

PTO carry over FF not reprocessing all employees

Hi
I have created a simple custom accrual plan with simple custom accrual formula and custom carryover formula.
I am trying to modify the a custom carryover formula and run the PTO carry over process with the "REPROCESS ALL" parameter set to 'YES' but the carryover formula is not REPROCESSING all the employees.
Am I missing something?

Hi,
Could you please correct me whether you have been attached multiple leave elements to this accrual plan ?
Otherwise system only carry over particular leave attached to accrual plan.
Thanks
AshokP

Is it possible to create a new List from another List's template and NOT carry over the associated Workflow?

Related to
this post, in cases where it's desirable to have two different workflows for two different Lists—is it possible to NOT bring forward a hardwired workflow when creating a new List from a saved template?
I.e. List #2 still has the workflow from List #1 hardwired in. List #1 still needs its workflow but List #2 wants to have a separate Workflow.

More importantly, because it's relatively easy for most folks to just start from scratch with a new Workflow—how does one disassociate a carried-over Workflow from the new List?
Use the web-GUI. (List Settings > Workflow Settings)
From Designer, there's a shortcut button at the top of the page in the Workflows tab: "Administration Web Page".

Customized Pf Status along with the standard Pf status

Hi all
I have created an ALV report and has its default pf status which includes all function like sum ,sort, export, variants save etc.
I have a requirement to have an extra push button along with this PF status.
I have created a pf status with this button.. and activated and called in REUSE_ALV_GRID_DISPLAY and did everything..
But in my output, only my customised pf status is displayed ie only the push button is displayed and all other standard functions are gone..
Can anyone help me to solve this problem.
Ie I want one push button along with the standrad pf status in ALV report using REUSE_ALV_GRID_DISPLAY .
Cheers
Christina

Hi All
Creation of new button in output refer below document and screen
if you want to add one more button in the Red line like below.
Reffer Below steps after that you can create or change STANDARD Gui in the program .
Go to Se41 give details like below.
Select Copy Status button in up. As shown below screen.
You will get below screen. Provide your custom program name.
Like below screen. Click on Copy.
You will get below screen click on copy button.
You will get below status.
Click on Activate like as shown in below.
Click on OK button you will get it in your program.

Negative carry over sholud not be allowed in fast formula

Hi,
I have coded like this so that it will not allow negative carry over (note: no expiry for carry over )
but this will not work since line 8 will bring just carry over from the previous year.
To get absence i can use get_absence function.so if i get no of absence ,total carry over and total accrual pto i can calculte net entilement.
but to get Total accrual PTO in carry over formula , I am not able to use the procedure
PER_ACCRUAL_CALC_FUNCTIONS.Calculate_Accrual.If I use i get error as
ORA-20001: The formula XXCHR_CR_VACATON_ACCRUAL_FORMULA could not be executed because the context ASSIGNMENT_ACTION_ID was not set. All the relevant context values must be set before a formula can be executed.
Action: If this is custom code then please ensure that it sets all the appropriate context values. If this is not custom code then please contact your local support representative.
ORA-06512: at "APPS.PER_FORMULA_FUNCTIONS", line 608
ORA-06512: at "APPS.PER_ACCRUAL_CALC_FUNCTIONS", line 70
ORA-06512
so how do I not allow negative carry over.
1 Years_service = floor(months_between(Effective_date, Continuous_Service_Date) / 12)
2 IF (GET_ACCRUAL_BAND(years_service) = 0) THEN
3 L_Max_carryover = GET_NUMBER('MAX_CARRY_OVER')
4 ELSE
5 L_Max_carryover = 0
6 Max_Carryover = L_Max_carryover
7 l_exp_Effective_Date = ADD_YEARS(Effective_Date,-3)
8 L_tot_carryover = GET_CARRY_OVER(Effective_Date,to_date('0101'||to_char(Effective_Date,'YYYY'), 'DDMMYYYY'))
9 IF L_tot_carryover <0 THEN
10 (Max_Carryover = 0)
11 Process = 'YES'
12 RETURN Max_Carryover, Effective_date, Expiry_Date, Process
tnx in advance

there are seeded Accrual formulas given out of the box, which you can edit for your purpose

Passing parameters along with portlet publishing url

Hi All
Any idea if portlet publishing url can take some custom parameters along with the publishing url when using disc api
Thanks

Hi Muthaiah,
Is this IView a Web Dynpro IView. If yes then you can easily do this by simply adding a Url parameter to the default inbound plug of the interface Controller of your WD application.
You can refer to this link: <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/library/webdynpro/inter-application-navigation%20in%20web%20dynpro.pdf">Tutorial 15</a>, <a href="/people/jochen.guertler/blog/2004/11/23/web-dynpro-best-practices-how-to-navigate-between-different-web-dynpro-applications Blog</a>
Do reward points if it helps.
Regards
Sid

Can I use custom query in DB Adapter with Polling

Hi All,
I am getting problem while using db adapter with polling. Can I use custom query in db adapter with polling.
I am using 2 tables; table 1 and table2
Structure of table1 is as:
File_name
Batch_id
Creation_date
Status
Structure of table2 is as:
Batch_id
Employee_ID
Last_Name
First_Name
Middle_Name
Group_ID
Site_ID
Dept_Num
Report_id
I have to use below query while polling to table1
Select count(*) as NOSEXP, Report_id
from table1, table2
where table2.batch_id =
table2.batch_id
and table1.Status= 0
group by Report_id;
I mean, when I use DB adapter to poll table1, I have to use above query.
Can you Please suggest on this.
Thanks in advance.

I will check for existance not based on Primary key but based on three other fields in the table. I think , by default DB adapter configured for MERGE checks for existance based on PK. Can we change the Primary Key in the mapping file after the DB adapter is configured. In that case , will it check for existance based on the fields , I mention.
Edited by: user12020809 on Sep 16, 2012 6:08 PM

Issue with calling url using custom uri from page loaded in stagewebview

I am using stageWebView for showing webpage in my mobile app but don't know how to move back to my app once it gets loaded. In application descriptor file, I had already registered custom uri scheme (myapp://) for IOS devices and from the loaded page inside stageWebView, I was trying to call following URL myapp://webcam. But nothing had happened. It neither called LOCATION_CHANGE event of StageWebView not called INVOKE_EVENT of nativeapplication.
How can I fix this issue?
Thanks in advance,
Mamta

Hi Ashutosh,
yea it gets launched correctly from safari. But my problem is with the link(which is using custom uri scheme e.g myapp://backtoapp) in the loaded page inside StageWebView. It is not allowing app to moveback to app from StageWebView. Moreover these two event listeners INVOKE_EVENT(native application) and LOCATION_CHANGE(stagewebview) are not responding. Dont know what should I do in order to move back to app area(mainView.mxml) from StageWebView(native browser).
Thanks,
Mamta

File Sharing on Social Websites or with Revel fail at 98% using PE12

I have been trying to upload a video and it keeps failing at 98% either when I attempt to load the file to a Social Website or when I tried using Revel. I'm unfamiliar with using Revel but I have uploaded several files previously to Youtube and everything was fine. This is the first time I've attempted to do this process with PE12 as I had PE9 before.   Any assistance would be appreciated.   Thank you.

I was able to upload directly to Youtube through their website after creating a movie or file of my timeline. I had hoped to by-pass this extra step by doing the uploading directly from PE12 but after multiple failed attempts, I choose to go the old way and just do it myself.
Trace
Date: Mon, 17 Feb 2014 21:40:42 -0800
From: [email protected]
To: [email protected]
Subject: File Sharing on Social Websites or with Revel fail at 98% using PE12
    Re: File Sharing on Social Websites or with Revel fail at 98% using PE12
    created by A.T. Romano in Premiere Elements - View the full discussion
Goldsk8te
Please read my experiences dealing with Adobe Revel in Add Media and in the Publish+Share/Private Web Album that is incorporated into Premiere Elements 12.
http://www.atr935.blogspot.com/2013/10/pe12-adobe-revel-add-mediapubli shshare.html
I felt then and do now that the features were not ready for the inclusion in a video editor.
As for PublishShare/Social Websites you should fare better with YouTube and Vimeo. I am not involved with Facebook so I have not tried the PublishShare/Social Websites/Facebook.
To get a baseline on the uploading situation and your account with any of these websites, I would first look at exporting your Premiere Elements Timeline to a file. See PublishShare/Computer/AVCHD and one of website presets there. Then upload the saved file to the website at the website. Then evaluate the process for your website account when using PublishShare/and one of the Social Websites.
Please check out the above and then let us know the outcome.
Based on your reply, we can decide what next in troubleshooting Premiere Elements Private Web Album and Social Websites.
Thanks.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6131040#6131040
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6131040#6131040
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6131040#6131040. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

C/O dosent carry over along with billto to part func. using custom Creat SO

Similar Messages

Maybe you are looking for