C3 unable to get my chat setup...

I bought a nokia c3 a week ago, I can't activate my chat though...  The main thing about the C3 is the Social features, and here I am unable to use my chat.  I went to messaging, chat, then it says to activate your chat, you need the newest chat updates, so, I click yes, it starts checking and then it gives an error, Unable to get updates, check phone connectivity settings. My pacet data is on "always on", I've tried via WIFI, but nothing.  SO SO SO dissapointed!!!  Great fan of nokia, now it seems like nokia wants to tell me to buy a BLACKBERRY??? PLEASE HELP!

Hi,
Please check with your operator chat availability on your phone.
Br
Mahayv

Similar Messages

  • Unable to get iTunes match setup to complete

    I recently subscribed to iTunes Match but have been unable to successfully complete the setup process.  I have read many other posts regarding initial matching troublingshooting and tried the following:
    -Sign in and out of iTunes Store
    -Disable and re-enable iTunes Match
    -Disable Genius
    -Delete any songs that made it to iCloud and start over with zero songs in iCloud
    -Creating new blank iTunes library and match, then import songs and match again
    I've spent a week trying all of these things, and am pretty convinced the service won't work for me and will seek a refund from Apple, but thought as a last ditch attempt I'd see if anyone had any recommendations I hadn't considered before I try the Google Play cloud music service.
    When I start iTunes Match it takes a few hours to gather information about my library, a few minutes on subsequent attempts, but never a few seconds.
    The matching step never truly completes.  It most frequently freezes at about 16,000/18,000 songs matched causing me to start everything over (including all the nonsense signing in and out, etc. noted above).  Occasionally it will appear as if it finished, the progress bar complete, saying all 18,000 songs matched and begin uploading unmatched songs.  I've only reached this step about three times in probably 50 attempts at iTunes Match this week.  On each of those occasions, the process completely freezes during upload after 100 songs or so.  I only have about 2000 songs to upload so thought by 'rinsing and repeating' I'd eventually get there, but since the entire process only makes it to the upload step about 5% of the time, instead of 20 attempts it seems like it's going to take a few hundred, which I don't have the patience for.  Also important to note that even after it makes it to the final upload step and successfully uploads ~100 songs before freezing, when I start over again, it always has to re-match 2,000-3,000 songs, so Step 2 takes a couple hours before uploads begin again.
    iTunes has matched those 2,000-3,000 songs in my library dozens of times now, and never remembers, I'm not adding anything new to my library.  I also have received the following error a number of times, probably about 5% of the time:
    We could not complete your iTunes Store request. An unknown error occurred (-9838).
    There was an error in the iTunes Store.  Please try again later.
    Appreciate any suggestions before I throw in the towel.  The idea of iTunes Match is great, but as I've been searching for troubleshooting help it's become clear a LOT of people have similar problems and the quality of the service is quite poor.

    No! Don't plug in your iPod yet!
    Oh good grief, I hope you didn't delete your music, KC! Are you sure it's not still there on your hard drive? Search for files named "mp3" or "m4p".
    Anyway - here is a post by Buegie on getting songs off your iPod, if the music is truly gone from your PC.
    http://discussions.apple.com/thread.jspa?messageID=1999043&#1999043
    After you get iTunes and the iPod updater re-installed
    http://www.apple.com/itunes/download/
    http://www.apple.com/ipod/download/

  • HT200197 When first starting Apple TV for the first time it went straight to the screen with the choices and they were all in French.  I have been unable to get to the setup screen no matter what I do.  I have tried restarting from scratch several times.

    No setup screen when first starting apple TV

    Hey Docbarb2,
    You should be able to change the language by either restoring your Apple TV with iTunes or change the language by following the steps in the second article. Take a look at the article below for more information to either get you back to square one or to at least a language that you know.
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    https://support.apple.com/en-us/HT202118
    Change the language on your Apple TV
    https://support.apple.com/en-us/HT202799
    Take care,
    -Norm G. 

  • I have "chatted" with customer service 5 different times. I was sent here. I have activated Photoshop Elements 9 on two different iMacs. They are both dead and I am unable to get it to activate on my newest computer. iMac. Can anybody help me?

    I have "chatted" with customer service 5 different times. I was sent here. I have activated Photoshop Elements 9 on two different iMacs. They are both dead and I am unable to get it to activate on my newest computer. iMac. Can anybody help me?

    Unfortunately, only adobe can help you with that, as most people here are just posters such as your self and don't work for adobe.
    If you go here and use the Chat now button (bottom of page), they should get you up and running by resetting your activations.
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  • New MacBook Pro, unable to get past the select your country screen during initial setup.

    I purchased a new MacBook Pro last night and am unable to get past the initial setup screen where you select your country.  The mouse will move around, but won't actually allow me to click on 'continue'.  I've also tried the keyboard commands to move to the next screen.  Nothing...

    I just experienced this, and I am recording the solution here for posterity. I got through the setup using the keyboard (tab to move between controls and space to select), thinking that the mouse click would work when I got through it. But I was dismayed to find that it did not ...
    ... at least so I thought! But actually, you have to push down the mouse pad, NOT just tap it. You can turn on tap-to-click later, but at the start you must push it until it audibly clicks. It is not obvious if you are used to Windows laptop mouse pads like me, where tap-to-click is the ubiquitous norm.

  • Presario v3702TU trying to setup it up with winxp 64 bit, but unable to get audio to work

    Hi,
    I just installed a old laptop of mine with win xp 64 bit + sp2.
    I am able to get most of the drivers for xp 64 bit, but audio is troubling me.
    I am unable to get exact driver for the below Device ID
    HDAUDIO\FUNC_01&VEN_14F1&DEV_5051&SUBSYS_103C30CD&REV_1000
    which should be connexant smart audio 221.
    I ahve installed the UAA driver, but not able to get exact dirver for xp 64 bit. All the drivers availble on net seem to be off vista/xp -32 bit.
    Please help

    It is really hard to find 64bit driver
    There is one has similar issue.
    http://h30434.www3.hp.com/t5/Desktop-PC-Sound-and-Audio-Reply/Vista-to-XP-downgrade-No-Sound/td-p/26... 
    You can get the driver from the page 2, or get it the skydrive link below:
    http://cid-3f10d7c1771f7efe.office.live.com/self.aspx/Public/Conexant%20SmartAudio%5E_221%5E_XP.zip
    Please note, MS UAA driver must be installed before audio driver.  Try to use the MS UAA driver from the page 1.  If has problem then use the link below:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&tmp_geoLoc=true&software...
    Sorry, i don't have unit to do the test for you. Please let me know what the resoult is.
    Cheers
    Although I am an HP Employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

  • Unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1

    I am unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1. Log message is as follows:
    Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
    Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\xplog70.dll'.
    Error: 17750, Severity: 16, State: 0.
    Could not load the DLL xplog70.dll, or one of the DLLs it references. Reason: (null).

    Hi JFriedley,
    According to your error message, there might three reasons for this issue.
    xplog70.dll is corrupt, you need to check if you have any SQL Server running on same file version and same production
     edition. If xplog70.dll is corrupt, you can copy it from the new server where agent is running fine to your problematic server.
    Native client not installed properly. If you try applying any latest Service Pack or Cumulative Update then check if the SQL Server Agent can start, if that also doesn’t solve issue then try to reinstalling SQL Server Native client from SQL Server setup
    files.
    There is a similar issue about error 17750, you can review the following article.
    http://blogs.lostincreativity.com/sqldba/sqlserver-error-17750-could-not-load-the-dll-xpstar90-dll/
    Regards,
    Sofiya Li
    If you have any feedback on our support, please click here.
    Sofiya Li
    TechNet Community Support

  • Unable to get parameter by using a controller in OAF

    Hi!
    I'm new using OAF and will appreciate your help a lot!!
    FYI:
    Basically I have to add 2 descriptive flexfields in a page (by creating a VO) and I have to update the table with the information registered on those dff (I've done all the logic already).
    I created a Controller (CO) which calls a method declared in an Application module (AM) that executes a store procedure (the CO and AM have been created by me and they extend a standard CO and AM).
    Problem:
    However, just before updating.. I'm having a problem because I'm unable to get a parameter by using paramContext.getParameter("reqHeaderId"); that will help me to identify which row I need to update.
    Since the instruction is not capturing the value, it returns null and I got the following error when I try to convert it to Number: oracle.apps.fnd.framework.OAException: java.lang.NumberFormatException: null
    It's really important to mention that before getting to the page where I click the submit button that does the logic mentioned.. there are 2 pages before the one where I'm trying to capture the parameter and the parameter needed is set on the 1st page. I've been checking each standard CO of the 3 pages and they use the instruction pageContext.putParameter("reqHeaderId"); to pass it between the 3 pages (As far as I know, if not please correct me). On the 3rd and last standard CO it uses pageContext.getParameter("reqHeaderId"); to get the value and do some other logic.
    So why Im not getting the value if I do the same thing (pageContext.getParameter("reqHeaderId");) on my xxController (which extends the standard CO)?
    Here is the code of the controller:
    public class xxController extends standardController {
       public void processRequest(OAPageContext pageContext, OAWebBean webBean)
        super.processRequest(pageContext, webBean);
       public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
        super.processFormRequest(pageContext, webBean);
        String str;
        str = pageContext.getParameter("_FORM_SUBMIT_BUTTON");
           if ((str != null) && (str.equals("SubmitButton")))
               String ReqHeaderId = pageContext.getParameter("reqHeaderId");
              String ReqLineId = pageContext.getParameter("reqLindId");
            Serializable[] parameters1 =
             ReqHeaderId
             ,ReqLineId
            ,pageContext.getParameter("xxavtBienServicio")     //dff
            ,pageContext.getParameter("xxavtAttribute3")         //dff
            String var = (String)am.invokeMethod("updateAttributes", parameters1);    // updateAttributes is the method that converts ReqHeaderId to number and executes my store procedure
    thank you for your help in advance!

    You need to verify that the parameter is being added to the pageContext from the first page to the last. You can do this by downloading the pages and all the class files to your development environment and put them into the myClasses directory. Then once you get it so it can be run in JDeveloper, you can actually invoke the debugger and do a watch on the page context for that parameter. It is important to note that you may need to download more than just those specific pages depending upon the setups of the supporting pages. I generally find it easier to just download everything for a particular application to my classes directory so I am not forever trying to find missing class files. Even then if they call some utility classes, you will need to download them to the JDevelper on your PC into the classes directory.  But once you are able to run the pages in JDeveloper you will be able to do a lot more with the debugger.
    Kristofer

  • Tecra A10 - Refurbished - unable to get it connected to my home network

    I just got this Tecra A10-104 refurbished Laptop...before I take it back I am asking here just in case theres something I have missed as I am unable to get it connected to my home network.
    I am running a Belkin Wireless Router that has 2 main PC's directly connected (LAN), and another PC wirelessly connected.
    This is my router: http://www.belkin.com/uk/support/article/?lid=enu&pid=F5D8233uk4&aid=9238&scid=0
    All PC's working fine and connected.
    Now I'm trying to setup this laptop to connect.
    I uninstalled the Vista Business and ussed the XP Pro Product Recovery disc that came with the Tecra.
    My WiFi card is: Intel(R) Wireless WiFi Link 5100 (Driver Date: 27/04/2008 - Driver Version: 12.0.0.73)
    It sees the network but no matter what i try just won't connect.
    What I have done so far (read before suggesting stuff I have already tried):
    Reconfigured routers WPS to Shared Key system.
    Made sure the wireless adapter has settings set to 20/40hz (auto)
    Restarted router, cable modem & laptop several times
    Wireless button on side of Laptop is ON.
    FN + F8 to enable WIFI (ON) BLUETOOTH (OFF)
    Added wireless network to Auto Connect settings along with SSID and passcode end encryption method.
    Clicked connect when network appears in network viewer dialogue and retyped passcode.
    Not working.
    I should add the Laptop has no problems connecting via its Gigabit LAN port.
    Anything else I'm missing?
    Thanks in advance.
    EDIT: Dual post removed.

    UPDATE:
    The next thing I tried was to reinstall Vista Business from recovery disc to see if this suffered from the same problem.
    The wireless connection worked fine on Vista and, despite the updates that I was being offered, worked without needing to update any drivers.
    This made me think...so the issue is probably XP DRIVER related.
    What I have done now is backup all the driver updates I was told to download by TEMPRO (BIOS & wireless manager updates included).
    I think part of the problem is that TEMPRO only works in Vista (not XP) so you are not informed of any updates that may be required if you downgrade to XP straight after purchase (which is what I did).

  • Unable to get the AppsLocalLogin.jsp page

    Hi,
    We are on oracle Db 11.2.0.2 and EBS : 11.5.10.2 on Solaris Sparc 64 Bit 5.10.
    We have recently added a web node to an existing setup.
    Although Apache services are up , but we are unable to get the AppsLocalLogin.jsp page.
    Replacing the domain name and Ip in line 4  with HOSTNAME.DOMAIN_NAME/IPADDRESS
    We have found the below error in the Jserv log :
    [12/04/2012 20:09:38:868 IST] <info> ApacheJServ/1.1.2 is starting...
    [12/04/2012 20:09:38:868 IST] <debug> using confFile /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties
    [12/04/2012 20:09:39:016 IST] <info> Connection authentication enabled
    [12/04/2012 20:09:39:045 IST] <info> Connection allowed from HOSTNAME.DOMAIN_NAME/IPADDRESS
    [12/04/2012 20:09:39:045 IST] <info> Connection allowed from /127.0.0.1
    [12/04/2012 20:09:39:046 IST] <debug> port 16000 is specified in properties file
    [12/04/2012 20:09:39:046 IST] <debug> port 16001 is specified in properties file
    [12/04/2012 20:09:39:046 IST] <debug> port 16002 is specified in properties file
    [12/04/2012 20:09:39:046 IST] <debug> port 16003 is specified in properties file
    [12/04/2012 20:09:39:046 IST] <debug> port 16004 is specified in properties file
    [12/04/2012 20:09:39:046 IST] <debug> port 16005 is specified in properties file
    [12/04/2012 20:09:39:046 IST] <debug> port 16006 is specified in properties file
    [12/04/2012 20:09:39:046 IST] <debug> port 16007 is specified in properties file
    [12/04/2012 20:09:39:046 IST] <debug> port 16008 is specified in properties file
    [12/04/2012 20:09:39:046 IST] <debug> port 16009 is specified in properties file
    [12/04/2012 20:09:39:046 IST] <debug> try to start on port 16000
    [12/04/2012 20:09:39:050 IST] <debug> try to start on port 16001
    [12/04/2012 20:09:39:050 IST] <debug> cannot create socket on 16000
    [12/04/2012 20:09:39:051 IST] <debug> cannot create socket on 16001
    [12/04/2012 20:09:39:051 IST] <debug> try to start on port 16002
    [12/04/2012 20:09:39:051 IST] <debug> cannot create socket on 16002
    [12/04/2012 20:09:39:051 IST] <debug> try to start on port 16003
    [12/04/2012 20:09:39:051 IST] <debug> cannot create socket on 16003
    [12/04/2012 20:09:39:051 IST] <debug> try to start on port 16004
    [12/04/2012 20:09:39:051 IST] <debug> cannot create socket on 16004
    [12/04/2012 20:09:39:051 IST] <debug> try to start on port 16005
    [12/04/2012 20:09:39:052 IST] <debug> cannot create socket on 16005
    [12/04/2012 20:09:39:052 IST] <debug> try to start on port 16006
    [12/04/2012 20:09:39:052 IST] <debug> cannot create socket on 16006
    [12/04/2012 20:09:39:052 IST] <debug> try to start on port 16007
    [12/04/2012 20:09:39:052 IST] <debug> cannot create socket on 16007
    [12/04/2012 20:09:39:052 IST] <debug> try to start on port 16008
    [12/04/2012 20:09:39:052 IST] <debug> cannot create socket on 16008
    [12/04/2012 20:09:39:052 IST] <debug> try to start on port 16009
    [12/04/2012 20:09:39:052 IST] <debug> cannot create socket on 16009
    ApacheJServ/1.1.2: Failed to bind to port(s) specified in /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties.  Please check /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties and jserv.conf file, and make sure number of JServ process specified in jserv.conf is less than number of ports specified in /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties. and the ports are not used by other processes.
    [12/04/2012 20:09:39:053 IST] <critical> ApacheJServ/1.1.2: Failed to bind to port(s) specified in /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties.  Please check /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties and jserv.conf file, and make sure number of JServ process specified in jserv.conf is less than number of ports specified in /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties. and the ports are not used by other processes.The IP of this web node is different from the IP mentioned in the log, at line 4.
    Regards
    KK

    Hi;
    ApacheJServ/1.1.2: Failed to bind to port(s) specified in /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties. Please check /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties and jserv.conf file, and make sure number of JServ process specified in jserv.conf is less than number of ports specified in /pch3/oracle/external/prdora/iAS/Apache/Jserv/etc/jserv.properties. and the ports are not used by other processes.Please check your port is avaliable or not also check related path
    Regard
    Helios

  • PLEASE HELP ME??? Lost itunes trying to downgrade back from 11.0 & unable to get itunes to work at all now..

    New Itunes setup is the worst one yet!!! I couldn't stand it, so I tried uninstalling it and reinstalling older versions, but now I am unable to get it to work in any version. I have uninstalled & reinstalled several times (trying this with multiple versions). Strange thing is that ever since I uninstalled 11.0 I have not been able to get any of the other versions to open at all.. Sometimes an error message box dings & pops up that says something about how to adjust the volume through your itunes, or unable to open file.. other times when I click on the icon it just does absolutely nothing. WILL SOMEONE PLEASE HELP ME??? I'm going crazy without my music & I am panicking because I am afraid I may have lost all music (I have thousands & thousands of songs on there).. I'm hoping to find a way to reinstall an older version, but at this point if I can't find a way to bring back the old version, I'll take 11.0 if I absolutely have to (meaning if it's the only way to retrieve itunes without losing my entire library)

    Have latest version of iTunes installed and running. Also make sure you have internet access working and can access Apple websites. Also, make sure you don't have any entries in your hosts file referring to gs.apple.com....If your not sure about how to do that, go ahead and do the rest first. You can come back to that later.....Plug in phone. Put phone in DFU mode.(google put iphone in DFU mode for instructions) Then restore the phone in iTunes by highliting your device in the left column and click on the Restore button. The latest iOS version is 4.3.3. That's what iTunes will restore it to. When it's done restoring, iTunes will ask if you want to restore from a backup or setup as a new phone. I would use the Setup as a New Phone option. Once it's done, you should have a clean install of the iOS and an operating phone, as long as there are no hardware issues with it.

  • "unable to get printer status" and "server-error-not-accepting-jobs"

    I've got an Intel Mac Pro with Tiger. When I accepted the latest update from Apple, I lost all my defined printers! I've re-added a local USB printer and a networked Laserjet - fine. But I also added a Phaser 850 color printer (networked) which used to work fine. It connects ok, and opens the printer queue window, but when it tries to print, it says "Unable to get printer status (server-error-not-accepting-jobs". The queue stays active (not stopped) but the jobs don't move. I've tried deleting the printer and re-making it - same deal. What's going on?
    Mike

    Hi Mike,
    One think I really dislike about OSX is the Rocket Science needed to just Print!
    Might try these two...
    Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    Might try Printer Setup Repair 5.1...
    http://www.fixamac.net/software/index.html

  • My iphone 6 plus after updating to IOS 8.2 the touch id doesn't work neither in home unlock nor in app store and when i'm trying to add a new fingerprint it says ''failed unable to complete touch id setup.Please go back and try again'' .

    my iphone 6 plus after updating to IOS 8.2 seems to have a problem with the touch id witch doesn't work neither in home unlock nor in app store and when i'm trying to add a new fingerprint it says ''failed unable to complete touch id setup.Please go back and try again'' . I have multiple fingerprints and none of them appear to work.

    Hi Giannis,
    If you are having an issue with Touch ID not functioning as expected, I would suggest that you troubleshoot using the steps in this article -
    Use Touch ID on iPhone and iPad - Apple Support
    Start with the section titled Clean the Touch ID sensor and then Get help with Touch ID.
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L

  • Unable to get Phone Dialer working

    Hello everyone,
    I have setup a brand new client. And I am unable to get the dialer working correctly.
    I have followed the directions here: Re: The Top10 most frequently asked questions and answers (FAQ) January 2009
    - Telephony service is started
    - Windows XP Phone and Modem settings correctly configured
    - Phone Dialer does work and does show the progress of the "manual" test call
    - Phone Dialer is running and minimized
    - SAP/b1 General Settings/Service is setup with an area code.. nothing needed for an outside line
    When I pull up a Business Partner and hover over a phone number, I hit CTRL+TAB and nothing happens... the next field is just highlighted and no dialing occurs.
    Any thoughts as to what I'm missing to get this working correctly?
    All input is welcome.
    Thanks!
    ~ terry o.

    Finally got this working. Please setup your dialer using these directions;
    - Telephony service is started
    - Windows Phone and Modem settings correctly configured with any required settings like area code or country
    - Run Phone Dialer (dialer.exe) and confirm it does work and does show the progress of a "manual" test call
    - Change SAP/b1 General Settings/"Service" is setup with an area code.. and outside line requirements
    Open SAP/b1 and hover your cursor over a phone number. When the "phone" icon is displayed, press "CTRL + double-click".
    The dialer should open and you should see the progres of your call.
    Good luck!
    ~ terry o.

  • Hello.  Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot.  I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193).

    Hello.  Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot.  I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193).  I have uninstalled/reinstalled I Tunes several times and this has not resolved the issue.  I also uninstalled/reinstalled Microsoft.net Framework 4 since this was suggested by Apple support.  This also has not resolved the issue.
    When I reinstall I Tunes, I get a message that the “Service ‘apple mobile device’ failed to start.”  Verify you have sufficient privileges to start system services.  I attempted to manually start the Apple Mobile Device service but get a pop up stating, “Error 1053: The service did not respond to the start or control request in a timely fashion.”Unsure what I should try next. 

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
    In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
    tt2

Maybe you are looking for