C6 sound very poor

HI,
I just procured my Nokia C6 2 days ago, sound quality is very poor..cant even hear loud when mobile is ringing..
any suggestions to increase sound ?

check that volume level is set correctly ,you can check this in profiles ,also you can try using a loud mp3 tone if you wish dont forget to activate the profile your intending on using
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

No sound or very poor one from front speakers T7900 system

I have a T7900 system and sudenly I have no more sound or a very poor one from the front speakers (left and right). The others (central, rear and subwoofer are working fine). I tried all configurations posible and from the control panel but still no result.
Anyone can help?

Hi,
Try swapping the front speakers with the others, this should tell you if the speakers are faulty. You might want to get in touch with support for further assistance on this.

Hi since I put the new update on my ipad. The sound quality on the ipad is very poor and just wondering is there going to be a update to sort it out.thanks

Hi since I put the new update on my ipad. The sound quality on the ipad is gone very poor it's sound very tinny. I just wondering if there is going to be a update to sort it out. Thanks

Hello Tollykev,
Thank you for using Apple Support Communities.
It sounds like you have some audio issues with your iPad after the iOS 7 update.
I want to recommend the following troubleshooting from the article named:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
Regards,
Sterling

L505-S5990 Very poor sound.

L505-S5990 sound volume very low. My wife and I have the same laptops both have very poor sound. Is there any fix driver etc.

golfnut10 wrote:
L505-S5990 sound volume very low. My wife and I have the same laptops both have very poor sound. Is there any fix driver etc.
The L505-S5990 laptop (and other models in the L505 series line which use the Realtek HD audio drivers) have not been configured properly when they were initially shipped. This is a two step process.
First, either update to the latest Toshiba audio drivers via the Toshiba Support web site, or by downloading the latest Realtek HD Audio drivers from the Realtek website.
Second, once the audio drivers have been updated, enable "Loudness Equalization" on either the Start --> Hardware and Sound --> Realtek HD Audio Manager --> Sound Effects tab, then click OK to save the setting change. Or on the Start --> Hardware and Sound --> Sound --> Speaker Properties (select Speakers then the Properties button) --> Enhancements tab, scroll down the list of sound effects to enable "Loudness Equalization" then select the OK button to save the setting changes.
Once the drivers have been updated and the "Loudness Equalization" has been enabled the system sound audio level is much louder, however you may find the DVD and Audio CD audio levels are still low. No real fix for that issue yet from Toshiba other than to experiment with the various sound settings.

Please Please Help...My t6100 sound quality is very poor

I cut the speakers wire to extend the wire to be make as home theatre. i cut four speakers wire and extend it. but i didnt cut the front right speaker which is enabled with sound control. after fixing it the sound quality is very poor other than front right speaker...any one knows please help and give solution....

Hello button172
If you are having an issue with your purchase, then report it to the iTunes Store.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Regards,
-Norm G.

My iphone5s continually drops calls and has very poor sound for callers sooo disappointed compared with iPhone 4 from which I've just upgrade

I am so disappointed as my iPhone 5 s is very poor for calls and repeatedly drops calls. I've contacted Orange and done a reset to factory settings with no improvement.These calls are to landlines. My iphone4 was excellent in comparison . I've requested an Apple support call tomorrow - any other suggestions or similar experiences? Call bars are much lower too on this new phone and wifi fails too with frequent fail to connect to server messages. I so regret having this phone..

I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot!

Very poor wireless reception on HP Envy 17t-j000

So I just recently got a HP Envy 17t-j000 quad edition (Windows 8), which seems to be having some wifi issues
I opted for the cheaper non-bluetooth adapter, the Realtek RTL8188EE, which at present seems to have almost zero documentation on the internet. The Realtek website doesn't even show any record of it!
Anyways, here's the problem: I'm getting very poor reception with it, to the point where one of my two wireless routers has only very intermittent and horrendously slow connectivity, and the other will work a room away but no further (and also sometimes drops too, but less frequently). Outside of this range, I can still see these networks, but cannot always connect. If I do manage to connect, it will show a strong signal (4-5 out of 5 bars) but will never actually load anything. In fact, though I'm not sure this is relevant or not, I have never seen any networks with less than 3 out of 5 bars for signal strength.
Meanwhile, a number of other devices work at a much larger range and without dropping the connection as this computer does. This includes a year old HP (I forget the model) and a five year old Acer. The speed on my faster router doesn't appear to be very different between the HP Envy and the other two.
I have:
* Done a number of restarts of the network modem and both wireless routers
* Verified that the driver on the wireless adapter is up to date and reinstalled it
* Checked to make sure there are no antivirus/firewall/other programs systems that could be interfering
So, does this sound like a just a crappy wireless adapter or could this be some sort of software issue or defective hardware? Also, if I were to just replace this with another wireless card, what sort of things do I need to be concerned with in order to make sure the replacement is compatible with the system?

OK Boys & Girls - - here's what I did - -
First - the Envy X2 is having similar problems - but my laptop is the 17t-j000 quad
so this IS the correct thread - -
I used the HP support assistant - - it installed an updated BIOS -
The WiFi still shuts down at 8 - 10 min watching Netflix (no mouse or user inputs - Max signal strength indicated)
{Yes - I have disabled allowing the machine to turn off power to the WiFi card in the driver section}
Loaded the Softpaq mentioned above (quoted below) - - 200MB - had to be SOMETHING in there ??
It loaded without a problem - - strange thing is - the Intel Driver date stayed the same: 9/17/2012
Tried the WiFi - - still shuts down at 8 - 10 min
Went back to HP Support Assistant - -
NOW it says - - I need a new WiFi package ?!?
So - I download and installed THAT - -
Back to Netflix - - and so far - has been NO SHUTDOWN ?!?
2 episodes watched - still connected - fingers crossed
Your mileage may vary - -
Hi,
Download the Softpaq sp63183 from the below FTP link which should resolve these issues.
This Softpaq is for Windows 8 notebooks with an Intel Wireless card and should not be installed if they have another manufacturer like Broadcom , Realtek , or Qualcomm .
http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63183.exe
Customer complaining about connection “ dropping ” intermittently.
Fixes an issue which causes the 802.11n wireless connection to be disabled after a wireless adapter driver is installed.
Customer is having general wireless connection issues with their Windows 8 notebook.
"I work for HP."

GT680 - Very poor microphone quality [sample included]

Ever since I purchased the MSI GT680R-008US, I noticed that the microphone quality was VERY poor. Here's a small sample that I recorded. I was right next to the microphone at the time: http://www.zshare.net/audio/898240503bc24764/
I've tried playing around with every possible setting, but couldn't find anything to help it (or anything at all, for that matter).
Is the microphone really naturally this crappy?

Hi igardner
You could try the marked solutions in this link, it could possibly be the same issue as the one in W520.
http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/W520-bad-microphone-Usable/m-p/528497#M19223
By the way, does your speaker produce whine / high pitch sound during skype or any sort of conference call?
Happy 2012!
Peter
W520 (4284-A99)
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future
=====================================
Sound Enthusiast and Enhancement (Post comments, share mixes, etc.)
http://forums.lenovo.com/t5/General-Discussion/Dolby-Home-Theater-v4-for-most-Lenovo-Laptops/td-p/62...

Earphone sound very low with low bass effect in Xperia ZR

I have recently bought a new Xperia ZR.I am surprised by very poor quality of sound from Sony in Earphones.When I checked with the dealer he was trying to convince me that the sound is proper.Sony is always well known for his audio quality and cameras...Can any1 please help if there is any way for it..I have tried all the methods in Equalised and downloaded many applications for sound booster but no use.

Sometimes even quality of the file being played makes a difference. However, to overcome the quality variation between tracks, you can enable Walkman App -> Settings -> Sound Enhancements -> Dynamic normalizer. You can also try combinations of Surround Sound (VPT) and the equalizer to get to a decent Bass. Alternatively, to make sure that it is not a problem with the Walkman App, try to use another music player like VLC or MX Player from the google play store. There is no issue in sound quality for me. You can also try to go to Settings -> Apps -> Downloaded Apps -> Walkman and Clear Cache & Data once to check.

Iphone 5s not picking up home Wi-Fi and/or very poor signals even in downtown area

Switched to Verizon and bought IPhone 5s less than 3 weeks ago. It was fine the first week then suddenly it won't recognized my home wi-fi and got very poor wireless signal. I have my old IPhone 4s and it works fine like a charm for wi-fi. It keeps reloading and not pop up any wi-fi signals. I went to the mall and normally it should pop up multiple wi-fis but it didn't. However my ipad did. I keep trying to reboot it or even reset it to factory settings and still doesn't work. Then yesterday my calls keep dropping in the middle of business conversation. This is unacceptable and no one seems to be helpful at Verizon. I even took screen pictures throughout the day yesterday to show when suddenly my home wi-fi popped up and a minute later it disappear. This also a domino effect for my photo stream, icloud back up, and most importantly my data plan. Now I can't even use my paid home wi-fi and use up all my data plan with Verizon and none of them care. I almost feel like switching to other providers. I also see that this is somewhat common to IPhone 5s with their troubled software or signal chip but not getting help from Verizon is the worst.

I downloaded the Speedtest app on my iPhone and iPad and would randomly test one right after the other. I accumulated about 5 tests a day on each device over the course of 3 days. I set up an appointment at the Genius bar. I told the Genius that I set up my phone as new and then showed him my comparisons of the Speedtest on both devices. He handed me a new (non-refurbished because it hasn't been out for long) phone, no questions. Apparently it was a hardware issue and not an iOS 8 bug.

NB205 - very poor product and service, do not buy Toshiba!! Completely dead in 6 months

I am posting this to warn as many people as possible to avoid buying Toshiba in the future. Not only was the product faulty, which I can understand sometimes happens w mass production. But the service was completely unacceptable, which was the deciding factor for me.
1. My new Netbook NB-205/BL started intermittently shutting down for no reason (complete black screen, not even to blue screen). By the time I returned home from my trip it had stopped working altogether. The power light will come on, and the fan/hard disk will try to spin for a split second and then go silent and stop completely.
2. Upon calling tech support who walked me through a bunch of diagnostic attempts (removing and re-inserting battery, etc.), they concluded it was dead and I needed to send it in.
3. The only thing I really care about is my data as I had stored a bunch of invaluable photos and downloaded about $200 worth of Amazon MP3s since receiving the Toshiba NB205.
4. Tech support assured me they would back up the hard drive for me and ship either a fixed or new computer with all my data still intact. They asked me to register it w their warranty department and call them back so they could send me a shipping box to send it back in. I did all that and it's been >3 weeks and no box.
5. So today I called Tech Support again and the guy goes "Oh yes, you have shipped your computer in for a hard drive failure?". At which point I had to explain how A) it's not a hard drive failure B) I haven't shipped anything anywhere because I never got the box I was promised.
6. Then I proceed to ask him again if my data would be safe, to which he informs me it's Toshiba policy/practice not to back up data for customers. I found this to be unacceptable and then I didn't know who to trust so I asked for a supervisor.
7. This supervisor wasn't able to help me either as he further informed me that they will not back anything up for me AND that I had to pay for shipping AND pay an authorized Toshiba Repair Center to back my hard drive up.
8. I suggested what everyone who I've talked to has said: Toshiba could send me a new computer since they've diagnosed the old one as being dead. I could swap out the hard drives, or they could send me one without a hard drive. And I could send them back the dead NB205.
9. NO was the answer. Toshiba wouldn't do anything for me, because software issues are NOT under warranty. And backing up my hard drive is considered to be a software issue. I repeatedly told him that it's their defective hardware that is causing the need for data backup. But this went ignored and I was told they don't cover anything in this case.
I either had to lose my data or pay probably $100 for a Toshiba dealer to back up my data for me. Oh yeah, and there isn't one of those within 20 miles of me and I live in Silicon Valley!! Oh yes, and they want me to pay to ship them the dead computer.
10. I finally asked him how he would feel if he was the customer, and if he felt this was any way to treat Toshiba customers. He replied by saying they have a process, and this is the process!
Well the next time I and any of you are in our "process" of deciding which brand of technology to buy, I'm certainly not going to consider Toshiba anymore. This is the second chance I'm giving Toshiba after having a very poor laptop AND service experience in 2000. Well, it took me 9 years to give them another shot, and I'm never going to trust them again. I told myself "well, it's a high quality Japanese brand, one that commands a premium in price that people are willing to pay so it should be an excellent product. AND if things do go pooryly, Toshiba will stand behind their name."
I was SO wrong!!! Let this be a message to all people out there, as I did read these forums before buying my product, but the NB205 was so new it didn't have many posts.
Fool me once, shame on you. Fool me twice, shame on me! I'm done with you Toshiba, it's really too bad that you will not honor your brand with fair treatment of your customers.
Ming Wu

It isn't that difficult to back up the data from the hard drive. You can easily do it yourself for about $20. http://www.datarecoverytutorial.com/recover-data-from-failed-laptop-notebook/
As for Toshiba backing up your data, ALL of the manufacturer's have that same policy. NONE of them will backup the data for you nor will they guarantee that your system will be returned with the existing data intact. This is spelled out in the Warranty documents and is fairly common knowledge amongst most computer users.
If the data was that important you should have been backing it up to USB flash drives, a usb external hard drive, or some other backup device on a daily basis just for this very reason. The fact that you failed to do so doesn't make it Toshiba's problem.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Apex report performance is very poor with apex_item.checkbox row selector.

Hi,
I'm working on a report that includes some functionality to be able to select multiple records for further processing.
The report is based on a view that contains a couple of hundred thousand records.
When i make a selection from this view in sqlplus , the performance is acceptable but the apex report based on the same view performes very poorly.
I've noticed that when i omit the apex_item.checkbox from my report query, performance is on par with sqlplus. (factor 10 or so quicker).
Explain plan appears to be the same with or without checkbox function in the select.
My query is:
select apex_item.checkbox(1,tan_id) Select ,
brt_id
, tan_id
, message_id
, conversation_id
, action
, to_acn_code
, information
, brt_created
, tan_created
from (SELECT brt.id brt_id, -- view query
MAX (TAN.id) tan_id,
brt.message_id,
brt.conversation_id,
brt.action,
TAN.to_acn_code,
TAN.information,
brt.created brt_created,
TAN.created tan_created
FROM (SELECT brt_id, id, to_acn_code, information, created
FROM xxcjib_transactions
WHERE tan_type = 'DELIVER' AND status = 'FINISHED') TAN,
xxcjib_berichten brt
WHERE brt.id = TAN.brt_id
GROUP BY brt.id,
brt.message_id,
brt.conversation_id,
brt.action,
TAN.to_acn_code,
TAN.information,
brt.created,
TAN.created)
What could be the reason for the poor performance of the apex report?
And is there another way to select multiple report records without the apex_item.checkbox function?
I'm using apex 3.2 on oracle 10g database.
Thanks,
Niels Ingen Housz
Edited by: user11986529 on 19-mrt-2010 4:06

Thanks for your reply.
Unfortunately changing the pagination doesnt make much of a difference in this case.
Without the checkbox the query takes 2 seconds.
With checkbox it takes well over 30 seconds.
The second report region on this page based on another view seems to perform reasonably well with or without the checkbox.
It has about the same number of records but with a different view query.
There are also a couple of filter items in the where clause of the report queries (same for both reports) based on date and acn_code and both reports have a selectlist item displayed in their regions based on a simple lov. These filter items don't seem to be of influence on the performance.
I have also recreated the report on a seperate page without any other page items or where clause and the same thing occurs.
With the checkbox its very very slow (more like 20 times slower).
Without it , the report performs well.
And another thing, when i run the page with debug on i don't see the actual report query:
0.08: show report
0.08: determine column headings
0.08: activate sort
0.08: parse query as: APEX_CMA_ONT
0.09: print column headings
0.09: rows loop: 30 row(s)
and then the region is displayed.
I am using databaselinks in the views b.t.w
Edited by: user11986529 on 19-mrt-2010 7:11

Blackberry Link for Q10 with Outlook Sync has very poor performance and not good Functionality

I am wondering if anyone has tested this software. Blackberry Sync software for my previous phones were wonderful. I can sync my contacts and calender in a very short time. With this new Blackberry Link it takes about 1 1/2 hours Plus to complete. And when it does complete - it duplicates entries which I did not want.
Plus what is missing is the following:
1. I am not able to say Update both Device and Outlook any longer. This functionality is gone.
My question: How does it do a two way sync if I only have a choice to use what I have on my phone or on outlook only
I want to be able to update my Outlook contacts with changes and addition I made on my Q10 phone and update my device with changes I made to Outlook.
Why did Blackberry remove this very flexible choice? Plus Blackberry Link has very poor performance.
I work for a large company and I do Enterpirse Software testing daily. Performance is the number one complaint for customers on top of the UI and functionality.

Thanks for the reply.
OS: Windows 8.1 Pro 6.3.9600 Build 9600
Link: 1.2.3.23
BB Desktop: 7.1.0.41
Anti Virus: Avast 140312-0
Firewall: None
A thing I noticed when I opened Descktop Software for the first time since the new Z30 is that the old application thinks it is looking for a Z30. I havent even opened the application since before I got the new device. The only way it could think I have a Z30 is if it is using a lot of the same files as Blackberry Link. That is some pretty terrible software development practices in my opinion. I'm going to take your suggestion and uninstall both apps, run a registry cleaner and reinstall BB Link and I bet it works a lot better afterwards.
EDIT 12 March 2014 7PM EST
Still all of the same errors with regard to syncing outlook contacts and Schedules. I will post all of the error messages I recieve here as I see them. Application is always started by connecting device with USB cable.
"Sync was unseccessful
Caught _com_error exception. Description(): Error in MAPILogonEx: MAPI_E_CALL_FAILED; Error(): -2147467259 (0x80004005); ErrorMessage(): Unspecified error; Source(): XCPCRdmptn.RdRDOSession"
REBOOT
Change to sync contacts only, 1-way sync to computer, always use device data
"Sync was unsuccessful
CPreferencesManager: Configuration Value for /Preferences/Account_1_65537/DevicePin not set in TransConfig.xml for translator RimBB"
REBOOT
Application went through the whole process and hung for about 15 minutes and then completed successfuly syncing contacts only.
Change to callendar only. Sync completed successfuly. No hang or errors. very quick.
A new recurring appointment on the device was not transferred to the computer.
Sync callendar again, completed successfuly.
Appointment is still not transferred to computer.
So far I've spent an hour tonight trying to sync my contacts and appointment changes from just one day. I'm not thrilled.

Macbook Pro 11,2 tests very poor WiFi performance compared to iPad

Configuration:
MBP 11,2 running 10.10.1
Airport Express 2014 vintage
WiFi Scanner.app speed test results on MBP range from 1 to 3 Mbps. My iPad Air (or iPad Mini) in the same physical position tests between 18 and 28 Mbps. WiFi Scanner.app shows SNR of 17 to 18 dbm.
The reason I am testing is because I have noticed network performance on the new MBP to be very poor in our current NZ location. In Palo Alto 2 weeks ago the MBP wifi seemed fine - I didn't bother to test.
Any suggestions would be much appreciated!

Hello .Sup,
Thanks for using Apple Support Communities.
To troubleshoot the Wi-Fi performance on your iPad please follow the troubleshooting steps in the article below. Also take a look at the recommended settings for Wi-Fi routers.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Take care,
Alex H.

URGENT: Migrating from SQL to Oracle results in very poor performance!

*** IMPORTANT, NEED YOUR HELP ***
Dear, I have a banking business solution from Windows/SQL Server 2000 to Sun Solaris/ORACLE 10g migrated. In the test environment everything was working fine. On the production system we have very poor DB performance. About 100 times slower than SQL Server 2000!
Environment at Customer Server Side:
Hardware: SUN Fire 4 CPU's, OS: Solaris 5.8, DB Oracle 8 and 10
Data Storage: Em2
DB access thru OCCI [Environment:OBJECT, Connection Pool, Create Connection]
Depending from older applications it's necessary to run ORACLE 8 as well on the same Server. Since we have running the new solution, which is using ORACLE 10, the listener for ORACLE 8 is frequently gone (or by someone killed?). The performance of the whole ORACLE 10 Environment is very poor. As a result of my analyse I figured out that the process to create a connection to the connection pool takes up to 14 seconds. Now I am wondering if it a problem to run different ORACLE versions on the same Server? The Customer has installed/created the new ORACLE 10 DB with the same user account (oracle) as the older version. To run the new solution we have to change the ORACLE environment settings manually. All hints/suggestions to solve this problem are welcome. Thanks in advance.
Anton

On the production system we have very poor DB performanceHave you identified the cause of the poor performance is not the queries and their plans being generated by the database?
Do you know if some of the queries appear to take more time than what it used to be on old system? Did you analyze such queries to see what might be the problem?
Are you running RBO or CBO?
if stats are generated, how are they generated and how often?
Did you see what autotrace and tkprof has to tell you about problem queries (if in fact such queries have been identified)?
http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10752/sqltrace.htm#1052

C6 sound very poor

Similar Messages

Maybe you are looking for