CA stops Internal domain names for certificates

I have got this information from digicert http://www.digicert.com/internal-names.htm is there any way to ensure all clients works properly.
Should we have to change our internal domain names to external ones, this will be a problem and visible. It gives us insecured feeling.
Experts please throw your views.
Thanks!
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

Hi,
Thanks for the great information from Andy.
Following is some detailed information on Split DNS, just for your reference:
Split-brain DNS is known by a number of names, for example, split DNS or split-horizon DNS. Simply, it describes a DNS configuration where there are two DNS zones with the same namespace – but one DNS zone services internal-only requests, and the other
DNS zone services external-only requests. However, many of the DNS SRV and A records contained in the internal DNS will not be contained in the external DNS, and the reverse is also true. In cases where the same DNS record exists in both the internal and external
DNS (for example, www.contoso.com), the IP address returned will be different based on where (internal or external) the query was initiated.
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Similar Messages

MSExchangeTransport 12014 3rd Party SSL Certificate does not match internal domain name.

I have a co-existance of Exchange 2003 and Exchange 2010 and after installing a new 3rd party cert I'm getting The following error. All mail is flowing and OWA is working.
Microsoft Exchange could not find a certificate that contains the domain name Exchange.domain.local in the personal store on the local computer. Therefore, it is unable to support the STARTTLS SMTP verb for the connector Default EXCHANGE with a FQDN parameter
of Exchange.domain.local. If the connector's FQDN is not specified, the computer's FQDN is used. Verify the connector configuration and the installed certificates to make sure that there is a certificate with a domain name for that FQDN. If this certificate
exists, run Enable-ExchangeCertificate -Services SMTP to make sure that the Microsoft Exchange Transport service has access to the certificate key.
Our GoDaddy UC SAN cert is not allowed to have .local SAN names, so I have no way of adding it to the cert. Is it possible for me to install a local CA and generate a self signed cert for the personal store or would it be better to disable
TLS for the receive connector?

Change the name on the Receive Connector (2010) or on the SMTP Virtual Server (2003) to match the name in the new certificate. One of them is sending the "exchange.domain.local" in the 220 banner when it accepts a connection.
--- Rich Matheisen MCSE&I, Exchange MVP

Puny code and IDN(International Domain Name)

quote:
code in google.cfm
<cflocation url='
http://www.google.co.kr/search?q=#listFirst(cgi.server_name,'.')#'
addToken='no'>
The code above is in
http://www.dot.kr/test/google.cfm.
if you click the above link it will go to google search page
with the keyword "
www."
if you change the sub-domain "www" to another word, it will
go to google search page with the keyword "
another word."
You can test it with the links below.
http://book.dot.kr/test/google.cfm
book
http://note.dot.kr/test/google.cfm[
note
http://adobe.dot.kr/test/google.cfm
adobe
http://movie.dot.kr/test/google.cfm
movie
http://coldfusion.dot.kr/test/google.cfm
coldfusion
http://e.dot.kr/test/google.cfm
the alphabet
e
The links above works fine as I expected.
when the sub-domain is English, it works fine like the links
above.
But the sub-domain is non-English, it goes to google search
page with the keyword in PUNY Code (xn-code).
For example,
The following link doesn't work correctly because the
sub-domain is non-English.
http://é.dot.kr/test/google.cfm
the alphabet
é
If you click the link above, it will go to google search page
with the keyword "
xn--9ca" instead of "
é"
xn--9ca" is the PUNY Code (xn code) of the IDN(international
domain name) "
é."
I like to make it go to google search page with the IDN
keyword instead of
the puny code keyword when a user enters IDN sub-domain.
(I like to make it go to google search page with the IDN
keyword "
é" instead of the puny code keyword "
xn--9ca')
Any suggestion will be appreciated.

As IE7 is on the road, most major browsers support
IDN(International Domain Name)
I think Server-scripting language should support IDN,
i.e. we should read IDN in server-scripting languages.
I've heard that there are some clues for reading IDN in PHP.
http://pear.speedpartner.de/apidoc/I18N_Punycode/I18N_Punycode/_Punycode_Punycode_php.html
http://phlymail.de/index.php?sid=79a...oads&what=idna
http://www.phpclasses.org/browse/file/5845.html
Then, why can't ColdFusion read IDN?
For example,
#cgi.HTTP_HOST in ColdFusion read EDN(English Domain Name).
We need a kind of cgi variables which is likely named
"cgi.HTTP_IDN" which can read IDN instead of PunyCode.
How can I read IDN in ColdFusion?
Any suggestion will be appreciated.

Reading idn(International Domain Name)

quote:
<cfoutput>
#listFirst(cgi.server_name,'.')#
</cfoutput>
I have the code like the above in my webPage
"subDomain.cfm."
(1)
http://korea.dot.kr/test/subDomain.cfm
(2)
http://한국.dot.kr/test/subDomain.cfm
If you click the link (1) in the above, you will read
"korea."
If you clikc the link (2) in the above, you will read
"xn--3e0b707e."
"xn--3e0b707e" is the puny code for the IDN
"한국" which means "korea" in korean language.
I like to read the IDN "한국" instead of the puny
code "xn--3e0b707e."

As IE7 is on the road, most major browsers support
IDN(International Domain Name)
I think Server-scripting language should support IDN,
i.e. we should read IDN in server-scripting languages.
I've heard that there are some clues for reading IDN in PHP.
http://pear.speedpartner.de/apidoc/I18N_Punycode/I18N_Punycode/_Punycode_Punycode_php.html
http://phlymail.de/index.php?sid=79a...oads&what=idna
http://www.phpclasses.org/browse/file/5845.html
Then, why can't ColdFusion read IDN?
For example,
#cgi.HTTP_HOST in ColdFusion read EDN(English Domain Name).
We need a kind of cgi variables which is likely named
"cgi.HTTP_IDN" which can read IDN instead of PunyCode.
How can I read IDN in ColdFusion?
Any suggestion will be appreciated.

How to Use 'uid' for AD Users Without Domain Name For User Log in OAM

How to Use 'uid' for synchronized Active Directory (AD) Users into Oracle Internet Directory (OID) Without Domain Name For User Logins in OIDDAS and OAM
We successfully integrated OAM 11g with EBS R12.1.3 Now all the AD user id's stored in fnd_users table as [email protected]
How can we remove @abc.com
We are using OID 11g and OAM 11g
Found the similar note for OID 10G: How to Use 'uid' for AD Users Without Domain Name For User Logins in OIDDAS and SSO [ID 580480.1]
We are in OID 11g.
Any help on this greatly appreciated.

I couldn't find any reference that could be helpful -- Please log a SR and see if this is supported and if the steps are available.
Thanks,
Hussein

How to change the name / IP address and domain name for BOE Server

Hello,
We want to change the name / IP address and domain name for BOE Server, please could you indicate the steps or procedure to follow?
I need your help
thank you

If it's 3.1 just change them, shouldn't cause any issues if by domain name you are referring to changing the domain the computer belongs to. If you are changing your domain for AD authentication then you will may have to take quite a few steps if the old domain is going away. Let us know.
Regards,
Tim

Trivia question: internal production name for the Mac Book Pro

Hi,
I know Apple has internal production names for their products. So the Mac Book Pro has an internal name other than the Mac Book Pro.
i was curious, for trivial purposes, what is Apple's internal production name they use for the MacBook Pro?

Yes, the few people who worked on the project are just dying to post it here so that they can lose their jobs. I can't believe no one has replied yet!
Seriously, no one knew they were ven announcing a new name for the PowerBook outside of the Apple Campus until Steve announced it. Why would anyone know the unannounced codename?

How to change IP, Hostname and domain name for Oracle Application R12

Hi,
I'm new to Oracle, we used to have one production and one test server for Oracle Application R12, but the test server was corrupted, so we decided to clone production server and create a new test server, after cloning and creation of test server, how should we do to change IP address, hostname and domain name for test server?
Our production and test server environment is:
Linux Enterprise AS 2.6.9
Application module: E-Business Suite Treasury only
Your advice will be much appreciated.
Regards,
Kenneth
Edited by: 850209 on Apr 7, 2011 5:37 PM

850209 wrote:
Hi,
There are few tnsnames.ora and listener.ora files in the system, how to know which one are effective? If I change tnsnames.ora hostname entry, do I need to change listerner.ora file also?
Thanks.
Regard,
Kenneth.tnsnames.ora is used only by client processes. listner.ora is used only to configure the listener, and that is a server side issue only. In addition, the listener can start without any listener.ora at all, using all default values. See my discussion of tns issues at edstevensdba.wordpress.com
If you are using dbcontrol, you will most likely need to reconfigure it, using the emca utility.

DNS Domain Name for SAP System

Hi,
I am installing BI7.1 , it is asking for DNS Domain Name for SAP System.
What to give i dont know please some one help
Thanks,
Jack

Hi,
Pls chk this link;
http://en.wikipedia.org/wiki/Domain_name_system
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/994a06ed-0c01-0010-878b-e796a9060209
Regards
CSM Reddy

Cant Launch Firefox from Mac with UTF8 International Domain name

From a Mac running OSX 10.7, I Launch Firefox with a UTF-8 string containing an international domain name:
I try to launch http://www.vihtilä.fi and Firefox responds: Can’t connect to http://www.vihtil\xc3\xa4.fi but the address bar string is correct. If I copy the address bar string, and paste it back into the address bar, then hit enter, the site opens. Safari and Chrome launch the correct site.
\xc3\xc4 is the UTF8 representation of 'ä'
Firefox on Windows works correctly, but I pass it a WCHAR (UTF16) name.

That is weird. 
The forum makes a correct and working link (www.vihtilä.fi) via preview, but changes the URL to the escaped encodeURI version when it is posted.
I can't replicate what you are doing, but the page opens via a desktop shortcut with "-url http://www.vihtilä.fi" command line parameter.

How to set Netbios/Partial Qualified Domain name for a Mac?

Is it possible to set a Netbios/Partial Qualified Domain name for a Mac the way one sets it for a PC? If so, where can this be set? Apparently, this is what my router uses to report clients connected by DHCP.
Mike

You're looking for something completely different if
what you're after is to have your DHCP server (your
router) report your computer name.
yep - that's what I'm looking for but everything else didn't pan out so I'm following up the suggestion of our IT guy (which is that it reports the Netbios name).
I don't know what brand or model of router you're
using but with a Linksys brand router it reports the
yep - I've got a Linksys, about 2 years old (802.11b).
computer name, which is set on your Mac under Apple
menu --> System Preferences... --> Sharing. The
Linksys router will report the computer name
typically found under Status --> Local Network -->
DHCP Clients Table.
nope - I've got it set as "Michael Levin Laptop", but the Linksys router shows it (and all of the other Macs on the network) as "¸#Ð„ª"... Any way to debug this?
What you'll notice is that none of this has anything
to do with Windows. Today's basic networking is
platform agnostic.
I thought so; it was a desperation move, based on my IT person's suggestion...
Thanks,
Mike

Addon Domain Name for Exchange 2013.

Dear All,
I have one exchange Server 2013 ([email protected]) but my organization have more 5 domain name. Now we need add in the exchange server more 5 domain name for mail ID. It's possible in exchange server to add addon domain name for mail ID.
Md. Ramin Hossain

Yes Absolutely. You can add as many as you want, they are added under Accepted Domains.
Make sure you have already pointed the MX Records to your exchange server and after adding the domain to accepted domain you will start receiving the emails.
Where Technology Meets Talent

Netbios/Partial Qualified Domain name for Mac?

Is it possible to set a Netbios/Partial Qualified Domain name for a Mac the way one sets it for a PC? If so, where can this be set? Apparently, this is what my router uses to report clients connected by DHCP.
Mike

Is it possible to set a Netbios/Partial Qualified Domain name for a Mac the way one sets it for a PC? If so, where can this be set? Apparently, this is what my router uses to report clients connected by DHCP.
Mike

Netbios/Partial Qualified Domain name for a Mac?

Is it possible to set a Netbios/Partial Qualified Domain name for a Mac the way one sets it for a PC? If so, where can this be set? Apparently, this is what my router uses to report clients connected by DHCP.
Mike

that did not work - I have a name entered in the
Sharing preference menu, and it does not show up.
Did you try setting the "DHCP Client ID" in the Network pane of System Preferences?
Even doing this may not work though... I know I had trouble getting a host name to show up correctly at my work. The DHCP server had picked up the previous name of my system and there didn't seem to be anything I could do from the client side to get it changed. The old system name was associated with my machines MAC address in the DHCP server and nothing I did from the client seemed to allow me to refresh the name the server had already latched onto. The network guys eventually had to delete the entry for my system off of the DHCP server and then allow my system to request a new IP address and refresh it's entry in the server. I have no idea how you might do something like this on a LinkSys router. I suppose the DHCP servers that run on these little personal routers are pretty rudimentary. I guess you might try doing some sort of reset on the router to see if it would reload client names. Or if you have your router configred to only allow connections from specific MAC addresses you might try deleting the entry for your Mac and then adding it back to see if that would trigger it to pick up a new client name.
sorry; I started a new thread because my question
is now much more focused. Someone told me the
Linksys router gets that info from the netbios name,
so I figured I should ask that specific question
with that specific subject title - maybe someone
knows how to specify this netbios name for a Mac,
but might not know or care anything about routers
and my specific problem.
It seems understandable that PCs would send their NetBIOS names to a DHCP server... but it seems to me that a Mac would send it's "sharing" name. I doubt that a LinkSys router would specifically request a NetBIOS name, but I don't really know... I don't have any experience with them. I suppose you could try turning on "Window Sharing" in system preferences to see it that made you Mac look more like a Windows box to the router. :^\
Steve

Internal Domain names

I know what a domain name is for the external web, but what forms of words are acceptable to OS X Server for an intranet? I don't want to have to pay to register a domain name acceptable to the rest of the web, I just want something meaningful for my intranet such as "diary" or "wiki" - or even an IP address alone.
Do they all have to end in .local or will a single word be OK? Should they all start with http://www. or something else? OS X Server help just assumes any website being set up is for world use, and there are no instructions if you just want to set up a private intranet visible only to people on the internal network but invisible to the outside world.
Where can I go for guidance/what formats are acceptable, please?
Many thanks.

Internal domains can be whatever you want. It doesn't have to be a .com, .net or even .local
If you want you can have your own domain .bar then you can have foo.bar as a hostname in that domain.
Since it's only used internally it won't have any impact on anyone outside of your network.
Similarly, if you really wanted to, you could call your own domain 'apple.com' and then have a hostname of basilisk.apple.com pointing to your machine. Of course, this would impact your ability to get to any other .apple.com hostname, so you might not want to do that, but it is possible.
As for the 'single word' question, by definition a hostname is a component of your domain which would mean that 'foo' isn't strictly valid, however, you can configure your machine (System Preferences -> Network -> TCP/IP -> Search Domains) to automatically append specific domain names to any lookup. If you set this to 'bar' then a lookup for 'foo' would automatically look up 'foo.bar' and you'd get the result you're looking for.
Finally, for now, there is no requirement to have 'www' as pointing to your web server. That's just a common convention used around the internet. It's just as valid to have fred.bar as your web server and barney.bar as your mail server if that's what you want.

CA stops Internal domain names for certificates

Similar Messages

Maybe you are looking for