MSExchangeTransport 12014 3rd Party SSL Certificate does not match internal domain name.

I have a co-existance of Exchange 2003 and Exchange 2010 and after installing a new 3rd party cert I'm getting The following error. All mail is flowing and OWA is working.
Microsoft Exchange could not find a certificate that contains the domain name Exchange.domain.local in the personal store on the local computer. Therefore, it is unable to support the STARTTLS SMTP verb for the connector Default EXCHANGE with a FQDN parameter
of Exchange.domain.local. If the connector's FQDN is not specified, the computer's FQDN is used. Verify the connector configuration and the installed certificates to make sure that there is a certificate with a domain name for that FQDN. If this certificate
exists, run Enable-ExchangeCertificate -Services SMTP to make sure that the Microsoft Exchange Transport service has access to the certificate key.
Our GoDaddy UC SAN cert is not allowed to have .local SAN names, so I have no way of adding it to the cert. Is it possible for me to install a local CA and generate a self signed cert for the personal store or would it be better to disable
TLS for the receive connector?

Change the name on the Receive Connector (2010) or on the SMTP Virtual Server (2003) to match the name in the new certificate. One of them is sending the "exchange.domain.local" in the 220 banner when it accepts a connection.
--- Rich Matheisen MCSE&I, Exchange MVP

Similar Messages

Host name on SSL certificate did not match the alias name in the URL addres

To the XI gurus,
One of our vendors had problem to send us xml invoices because the url address had our server alias name and the SSL certificate we asked them to install had the server name.
To resolve this issue, can we install two certificates (one has the alias name and one has the server name) at our XI server or we can only have one SSL certificate installed at any time?
Thanks!
Fisher Li

Fisher Li,
> we can only have one SSL certificate installed at any time?
To my knowledge we can install only one certificate.
Cheers
Agasthuri

Cannot open install assistant. I get this error message: The application cannot be installed due to a certificate problem. The certificate does not match the installed application certificate, does not support application upgrades, or is invalid. Pleas

How can I downloade a trial of Adobe Elements 12?
I followed the instructions to download assistant...but get this message: The application cannot be installed due to a certificate problem. The certificate does not match the installed application certificate, does not support application upgrades, or is invalid. Please contact the application author.

Hi alposer,
Please remove the copy of the Adobe Download Assistant you currently have installed and then reinstall the Adobe Download Assistant.
Regards,
Rave

The application cannot be installed due to a certificate problem. The certificate does not match

the application cannot be installed due to a certificate problem. The certificate does not match the installed application certificate, does not support application upgrades, or is invalid. Please contact the application author.
i DONT HAVE THE DISK FOR aDOBE 6.0 ANYMORE HOW DO i UPGRADE??

You cannot in any case buy an upgrade from Acrobat 6, it is too old. So it's a full price purchase I'm afraid.

The https URL hostname does not match the Common Name (CN) on the server.

Hi,
I am getting the following error while trying to use https with our self-signed certificates.
javax.xml.ws.soap.SOAPFaultException: Marshalling Error: The https URL hostname does not match the Common Name (CN) on the server certificate. To disable this check (NOT recommended for production) set the CXF client TLS configuration property "disableCNCheck" to true.
The above error is the error I get, when I try to use the Web Services using https.
I have added the following lines in cxf.xml but it still doesn't seem to work correctly.
<http-conf:conduit name="*.http-conduit">

<http-conf:tlsClientParameters disableCNCheck="true" />
Kindly let me know on what would be the issue here?.

I had P2V'd a SQL 2008 server and was having this issue. I tried everything I could find to get the affinity corrected; setting the Lock Pages security policy, trying the affinity commands in Single User mode, etc.
Then wrighbar's response got me headed in the right direction, but I ran into an issue where the previous engineer had set the Physical SQL server to have affinity on procs 9-16 of a 16 proc box, I could only set up to 8 procs on my VM. After searching
for a while for registry keys or config files that might be editable to change the affinity I couldn't find where SQL got that information from. Finally it hit me, maybe it's stored in the master or msdb datatbases.
SOLUTION: I was able to go back to the original Physical machine, change the affinity settings there, Stop SQL on both boxes, then copied MASTER, MODEL, MSDB, TEMPDB from the original Physical machine to the new virtual machine. All services started
OK on the virtual machine now and affinity was set the way I needed it.

CRMv1.2 Enter this License key is invalid or does not match the organization name?

Hi All,
Thanks for your support in advance.
This is Ashok. We purchased CRM v1.2 from the third party. They have provided us the CRM CD's(5) with product key. The problem is when im trying to install CRM server in windows 2003 server its asking for organizations name and License Key. So I have entered
my company name as the organization name and entered the product key as a License Key. After click on the add button its giving an error i.e., "Enter this License key is invalid or it does not match the organization name. Verify your license key and organization
name".
Kindly suggest me the best solution to resolve this issue.
Waiting for your valuable suggestions.
Thanks,
Ashok M.

Hi Ashok,
We have a specific forum for discussing CRM:
https://social.microsoft.com/Forums/en-US/home?forum=crm
However from the description it is a license related question. In this situation it is more recommended to contact the support directly:
Here is the support page for Microsoft Dynamics:
http://www.microsoft.com/dynamics/en/asia/contact-support.aspx
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

The Bonjour name does not match the host name

I changed the host name of a Mac Mini Server (OS X 10.8.5, Server 2.2.2) but then I got the email "The Bonjour name xxx-server does not match the host name yyy-server.local).
How do I fix it? (Appreciate for detailed steps.)

The Bonjour name is separate from the DNS host name, and you're hopefully not serving the .local domain from your own DNS server within OS X Server. That can cause problems.
The Bonjour name is assigned by  > System Preferences > Sharing.
If you want to see the three names assigned, launch Terminal.app from Applications > Utilities and enter the following three commands (some example output shown for each command) (do not enter the $ signs shown in the following; that's the command prompt):
$ scutil --get ComputerName
myhost
$ scutil --get HostName
myhost.example.com
$ scutil --get LocalHostName
myhost
$
Post the output from the three, and we'll have a look. If you want or need to obfuscate, please do so consistently. Example.com (as shown above) is a good choice for an obfuscated domain, too.

Outlook 2010 Certificate does not match

I have a problem with a new installation of Exchange 2013 on a Windows 2012 Server. Most of the clients are Outlook 2010.
All the internal users are getting the error message:
"There is a problem with the proxy server's certificate. The name on the security certificate is invalid or does not match the name of the target site exchange2013.myinternaldomain.local
This is shortly followed by another box "the name on the security certificate is invalid or does not match the name of the site"
Of course the issue is my purchased SSL certificate is MAIL.REALDOMAIN.ORG while the server's name is exchange2013.myinternaldomain.local
With Exchange 2010 servers I have deployed I have had success following KB article 940726 but this time it didn't fix it with Exchange 2013.
There must be a solution!
I found this article:
http://support.microsoft.com/kb/2783881 the first suggestion from MS were impractical and the registry edit didn't work either (plus the thought of going to all my clients to do a registry
fix doesn't make me happy!)
I tried creating a local DNS zone for my external domain name and pointing to the internal IP but that didn't fix it.
In the ECP under the Outlook Anywhere section -- "*Specify the internal host name such as contoso.com that users will use to connect
to your organization:" I changed the internal host name to the external .org address but this caused Outlook clients internally not to work.
I used the -AutodiscoverServiceInternalUrl command to point it to the .org address on the certificate but didn't work either.
I have a service record in both external and internal DNS pointing to the mail.realdomain.org address.
Any other suggestions?
Thanks in advance!
Mike

Thanks for the information. I actually finally got this resolved a few weeks ago by speaking directly with a Microsoft technician. I am going to post what finally fixed my problem with the hopes that it will help others in my position.
Again, the problem which I am sure is common is a .local domain internally and a "real" domain on the outside. The solution that the MS tech had me do was to simply point EVERYTHING both internally and externally to the external host name - the one that
matched the certificate I had.
I'm surprised this solution isn't found elsewhere - it seems so obvious.
He had me run an number of commandlets which I will post here - with the caveat that they were for my environment! (I've masked my real domain name and substituted - mydomainame.org)
Set-Webservicesvirtualdirectory -Identity "EXCHANGE2013\ews (Default Web Site)" -InternalURl
https://mail.mydomainname.org/ews/exchange.asmx
Set-OutlookProvider EXCH -CertPrincipalName msstd:mail.mydomainname.org
Set-OutlookProvider EXPR -CertPrincipalName msstd:mail.mydomainname.org
Set-OutlookAnywhere -Identity "EXCHANGE2013\Rpc (Default Web Site)" -InternalHostName "mail.mydomainname.org" -InternalClientsRequireSsl $True -InternalClientAuthenticationMethod NTLM
Set-Webservicesvirtualdirectory -Identity "EXCHANGE2013\ews (Default Web Site)" -InternalURl
https://mail.mydomainname.org/ews/exchange.asmx
Set-OutlookAnywhere -Identity "EXCHANGE2013\Rpc (Default Web Site)" -ExternalHostName "mail.mydomainname.org" -ExternalClientsRequireSsl $True -InternalClientAuthenticationMethod NTLM --ExternalClientAuthenticationMethod NTLM -IISAuthenticationMethods
Basic, NTLM, Negotiate
Set-OutlookProvider EXCH -CertPrincipalName msstd:mail.mydomainname.org
Set-OutlookProvider EXPR -CertPrincipalName msstd:mail.mydomainname.org
Set-OutlookAnywhere -Identity "EXCHANGE2013\Rpc (Default Web Site)" -InternalHostName "mail.mydomainname.org" -InternalClientsRequireSsl $True -InternalClientAuthenticationMethod NTLM
The last thing we did was ADD in DNS on the internal DNS server the mail.mydomainname.org and point it my Exchange Server private IP (192.168.1.2) If you do the whole host name and not just mydomainame.org it wont mess up access to say an external
website.
hope this helps!

HTTPS - certificate does not match the name of the site

Hi all.
We created an http destination to an external server in sm59. We are going to use SSL, certificate has been imported in strust.
Our https settings are correct (we already use https in antother scenario), but there seams to be something wrong with the certificate of the http destination.
When I use the windows-console on our XI server and try to open the URL of the http destination with Internet Explorer, Windows tells me that "The name on the security certificate ... does not match the name of the site".
Is there a way to tell the server to ignore this security warning or is it necessary to create a new (correct) certificate?
Any help is appreciated.
Best regards,
Philipp

Philipp,
Don't know much about this topic, but my guess would be that will have to create a new certificate with the appropriate credentials.

Certificate does not match a unique certificate on this host for the issuer

Hey everyone!
I've been working with a strange issue on my persistent chat pool. I added a pool to my current deployment, all of which went without issue, until I tried to connect to one of my chat rooms, where I was met with the infamous "Your chat room access may
be limited due to an outage". The logs were filled with the following error
"The persistent chat server can not establish or maintain MTLS connection to the Lync Server
Reason String: RemoteDisconnected"
When I went to renew the internal cert, I get the message:
WARNING: "4f000000139c71d470b9a56af1000000000013" does not match a unique certificate on this host for issuer "CN=hosting-EXAD2-CA-1, DC=hosting, DC=email".The following certificate was assigned for the type "Default":Default:
E1864894FD306300A16F301AA21446CF45F7ABD3 EXPCPOOL.hosting.email 02/16/2017 CN=hosting-EXAD2-CA-1, DC=hosting, DC=email 4F000000161F1E51F1F5EB8C57000000000016ImageWARNING: "Set-CSCertificate" processing has completed with warnings. "1" warnings
were recorded during this run.ImageWARNING: Detailed results can be found at "C:\Users\administrator.HOSTING\AppData\Local\Temp\1\Set-CSCertificate-[2015_02_17][08_29_57].html".
Any thoughts on this?

Hi,
Check this old thread
https://social.technet.microsoft.com/forums/lync/en-US/3d569519-8a43-4cd2-b322-718ee575e140/lync-frontend-certificates-vanish
https://guybachar.wordpress.com/2014/04/16/certificate-requirements-for-lync-2013-enterprise-persistent-chat-server/
Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question.

Installed SSL certificate does not appear

I used Open SSL to generate a certificate for my 5508 WLC. Went through the process of getting a 3rd party cert and then installed it into the WLC.
The WLC said it installed properly, I rebooted, and I can see it in Management-->HTTP-HTTPS under "current certificate"
When I connect to the controller's administration webpage I still get a certificate warning. I haven't tried the guest network yet.
Shouldn't the controller be using the same cert for both pages? Is there something I am doing wrong?

I confirmed that the guest authentication page is also getting the old self-signed cert as well (and a warning).

File Name of Image Displayed in PSE 8 does not match File Path Name in Windows 7

I recently got a new computer .I upgraded on my Windows XP computer from PSE 5.0 to PSE 8.0. I then moved my files to the new computer running Windows 7 following the instructions I received on an earlier post. I copied the catalog folder and the picture folders on the C drive from the old to the new computer (catalog folder to location specified in System Info; images to My Pictures).   Everything appears to have worked beautifully without having to go through a big Reconnect struggle. The organzer appears to have found all of the images and I can bring them up in Editor as well. However, when I look at the properties of a given image the full file name displayed is what it was on XP, i.e., C:\Documents and Settings\<username>\My Documents\My Pictures\<folder name>\<file name> rather than the path as it is in Windows 7, i.e., C:\Users\<user name>\My Pictures\<folder name>\<file name>. I am new to Windows 7 so maybe I am missing something unique to Windows 7 but I would appreciate any information.

You're observing the special folder aliases that Vista and Windows 7 create to preserve backward compatibility (Microsoft keeps changing how and where users' documents are stored).   On Windows 7:
C:\Documents and Settings\<username>\My Documents\My Pictures
is a special kind of alias to the folder:
C:\Users\<user name>\Pictures
(And C:\Users<user name>\My Pictures is yet another kind of Windows 7 special alias, a "library", that includes the folder C:\Users<user name>\Pictures.)
Whenever an application like PSE refers to the old location, C:\Documents and Settings\<username>\My Documents\My Pictures, Windows automatically translates that under the covers to C:\Users\<user name>\Pictures.   But Windows Explorer is configured to prevent you from accessing C:\Documents and Settings\ interactively -- only programs like PSE are able to do that. Microsoft wants users of Windows Explorer to always use the "new" name, C:\Users\<user name>\Pictures.
In your case, your catalog contained the old XP folder paths, and Windows is automatically translating them on the fly to the new paths, unbeknownst to PSE.
Like most such backward-compatibility hacks, this does not work perfectly. PSE thinks that the old path and the new path refer to two completely different folders. I'm not positive, but I think there are opportunities for PSE to get confused by that.   When you import new photos, they will get recorded in the catalog under the new folder paths.
In my previous recommendation for how to move to the new computer, I had assumed that you would most likely be changing user names and photo locations, and thus you would be forced to do a Reconnect, and you wouldn't have encountered this. If I had thought you weren't going to need a Reconnect, I would have recommended not using this method but rather using Backup/Restore (my first recommended method) -- my bad.
It may well be that your current catalog and PSE will work well enough.   But there is at least a small risk that down the road PSE will get confused by the old and new folder names. The easiest way to avoid that risk would be to start over and use the Backup/Restore method for moving your catalog, whch is more effort on your part. But because I don't fully understand the risk, I can't tell you whether you should be worried about it.   Definitely do some testing: editing, importing and editing new photos, use Display > Folder Location view, try renaming and moving old photos to new folders, try the Photo Downloader, etc.

File paths does not match with file name

Hi,
somehow iTunes does not properly file my audiobooks. Eventhough all audiobooks are marked as media type: AudioBooks and Genre: AudioBook (German: Hörbuch), but when looking in Music --> iTunes --> iTunesMedia --> AudioBooks there's only a few AudioBooks that I bought with Audible.
All the other AudioBooks are stored I don't know where. When opening the information about an AudioBook, and select "overview" it says at "location" ...iTunesMedia/Music/... and an artist name or compilation followed by an artist name.
How can I easily redirect iTunes to store the AudioBooks in AudioBooks and not under some wired musican's name where I never placed the audiobook before
Any idea? Does anybody know of this bizare problem?
thanks for your help from Cologne, Germany,
Daniel Vollmer

HDash-Tech,
thanks for the tip, but since I have my iTunes Library on a NAS I have to direct iTunes every now and than via "choose library" to the folder and it doesn't make a difference...
I think it's somehow due to my iTunes Match. I know they do not sync audiobooks, but they mess up pretty much everything else within my library. Songnames here and there and especially cd covers!
Any other idea how to get it straigten out again?
Thank,
Daniel

.mac does not work with domain name

I used Iweb 08 to host my domain name from godaddy.com.
Godaddy account is: http://www.eyalphotography.com/
.mac web page is: http://web.mac.com/enahmias
I published to .Mac and went through the personal domain name procedure (using .Mac account settings and godaddy CNAME) so now .Mac is my host and I don't upload anything to godaddy. Updates are made to .Mac. but even after 4 days when trying to go to http://www.eyalphotography.com/ I still get this message: “Safari can’t open the page “http://www.eyalphotography.com/” because it can’t find the server “www.eyalphotography.com”. If I go to http://web.mac.com/enahmias no problems.
I want my page updated to http://www.eyalphotography.com/ that is the whole point of doing the cname and forwarding my domain. People should just go www.eyalphotography.com and done.. not web.mac.com/eyalphotography etc.. it beats the purpose of this thing.
So any solutions why it’s not working?

Here is a step by step on how it finally worked for me.
1. From Iweb choose domain name
2. when logged to .mac click on domain name
3. If you have any troubled name there just remove it.
4. Create a new domain name and follow instructions until it says to go to your domain registrar and continue later
5. Log to godaddy.com
6. Under the Domains menu click on My domain names
7. Click on your domain name that you want to change cname for .mac
8. On the top third of the page in the middle click on Total DNS Control and MX Records
9. On the page that opens in the cnames section click on the Reset to default setting
10. Wait a few minutes, and then refresh the page. Then on the same section under www. click on the pencil icon to edit the cname
11. Leave www. alone and on the next line type: web.mac.com and ok the changes.
12. Log out of godaddy
13. Return to the .mac domain name dialogue box and finish according to the prompts.
14. Go back to iweb and republish ALL to .mac
15. In my case it took only a few hours and after 2 weeks of frustration it worked as magic.
Good luck
Message was edited by: eyaln

Creating website with 3rd party server using blogspot or wordpress's domain name?

Hi all!
I just wonder...
I am now offered a free hosting service and I want to create my personal site with iWeb.
Questions come:
I don't really wish to buy a domain since the free service only last for half a year and I just want to try out blogging...
Is it possible for me to use create a iWeb made site using blogspot or wordpress domain and 3rd party hosting service?
Thanks in advance. Coz i really have no experience on this

The short answer is no. WordPress and Blogspot are two totally different things and are blogging systems and you can use these for free, but what you do is create a username and your blog is then pubished to WordPress servers etc., so your blog url is then http://username.wordpress.com.
If you want to create a site with iWeb and avail yourself of free hosting and upload there, then you'll need to register a domain name.
Wordpress, iWeb and Blogspot are totally different and the only way in which you can use both is to create your site in iWeb and then upload to the free hosting and just create a link from your iWeb site to your blog created with either WordPress or Blogspot.

MSExchangeTransport 12014 3rd Party SSL Certificate does not match internal domain name.

Similar Messages

Maybe you are looking for