Cable order important for replaced Hard Drive?

I just replaced my F:/ projects drive, but did not pay attention to the cable order, either power or signal(?), that is, which cables were connected to which drives. Upon startup, I had to go into BIOS to set a boot drive, but there was only one drive showing (besides the DVD drive and a "removable" drive). I selected it but the PC still is asking for a boot drive.
I messed up, right?
Is there a way to figure out the proper drive and cable associations?
Thx.
Paul
UPDATE: I got it to boot by changing the "right angle" SATA cable to the C:/ boot system drive. I have my E:/ media drive, but I'm not seeing the new F:/ projects drive yet.
Message was edited by: Paul Stark
UPDATE 2: Looks like I have to initialize it first in Computer Management (Win7). It's only 1TB, so I think I have to go with MBR style, if I'm not mistaken.
Message was edited by: Paul Stark

The new hard drive needed simply to be initialized.
The initial issue was that the "right angle" SATA cable needed to be connected to the C:/ system drive.
This resolved my issues and the new drive is functioning well so far with files being copied to it as I write.

Similar Messages

Has anyone else had a problem with obtaining funds for replacement hard drive?, Has anyone else had a problem with obtaining funds for replacement hard drive?

Has anyone else had a problem with obtaining funds for replacement hard drive?, I have had difficulties obtaining replies as the funds appear to have gone astray and Apple aren't prepared to give me their bank details so my bank can try and locate them?

Might thry this if you are in N. America. It is a escalated level of support:
Apple Customer Relations 1-800-767-2775

Procedure for replacing hard drive and transfering data?

I am replacing my original hard drive with a much bigger one. All of my data is backed up using Time Machine. Is there some way for me to transfer data from my old hard drive to my new one using a quick simple method like Migration Assistant rather than doing a restore to my new drive once it is installed?
I have used Migration Assistant many times when buying a new computer and it always works perfectly. I have never done a full computer restore so I am a little worried about that process (needlessly?).

I ALWAYS build my own drive (takes 5 mins). More storage and less money.
Use FireWire not USB.
USB is packet oriented and data transfer is managed by the CPU, Firewire is a streaming protocol and data transfer is managed by the CPU only to initiate transfer, after that, Firewire handles the rest dropping CPU load to nearly 0%.
 http://www.cooldrives.com/ox93saiihadr.html
http://www.amazon.com/Western-Digital-Intellipower-Desktop-WD20EADS/dp/B001RB1TI S/ref=sr11?ie=UTF8&s=electronics&qid=1258862242&sr=8-1

Brands for replacing hard drive

I have been running out of memory as the iLife 08 requires at least 10 gb free for some of the programs iDVD. Time to upgrade my 40gb HD! I have been looking through the post and will replace with a 160gb drive. ANy suggestions for brand of replacement? What is the difference between the 5400 and 7200rpm (I know that one rotates faster but is that a disadvantage because of heat?? Is it worth leaving the 40 gb in and using the other as a slave? so many questions for such a small drive
John

John:
You are very welcome. If you are planning to replace it yourself, it is quite manageable, although a bit intensive. You will find step-by-step directions at ifixit.
Be sure you have the right size screwdrivers, including the Torx 6 driver, as you don't want to chew up the head of any of those tiny screws, or they will be almost impossible to remove. I use several small medicine cups (or any other smalll receptacle) to hold the screws for each step, nesting them along the way. Some people print out the directions and place the part for that step, and tape the screws onto that page. I also suggest trying to complete the operation in sessions close to each other so you don't lose track of what you were doing previously.
Should you have further questions, please do post back.
Good luck.
cornelius
Message was edited by: cornelius

How do you find the right replacement for a hard drive

i have a 2007 macbook and the hard drive just went out and i want to find a new one that would be combatible

For a new hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC for regular hard drives and SSDs http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here are instructions on replacing the hard drive in a MacBook with a removable battery. http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
After you put in your new hard disk put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window.
Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. You should see your hard drive in the left hand column along with your other drives. Click on the drive and select the Erase tab. Set the format value to Mac OS Extended (Journaled) and click the Erase button. After that has finished select the Partition tab. Type in a Name for your hard drive and select how many partitions you want from the Volume Scheme. The usual setting is one partition. Click on the Options button after you've selected a partition to make sure it's set for GUID. Then click the Apply button and after the Partitioning is done quit Disk Utility.
You can now follow the instructions on the install screen

Can anyone help me with advice for a replacement hard drive

Hi there,
Can anyone help me with advice for a replacement hard drive and RAM upgrade for my Mac Book Pro 5,3
Its 3 years old & running Snow Leopard 10.6.8
I do a lot of audio & movie work so performance is important.
The logic board was replaced last summer & I was advised to replace the hard drive then...oops
Anyway it has limped on until now but is giving me cause for concern...
I have found a couple of possibilities below...so if anyone does have a moment to take a look & help me out I would be most grateful
http://www.amazon.co.uk/Western-Digital-Scorpio-7200rpm-Internal/dp/B004I9J5OG/r ef=sr_1_1?ie=UTF8&qid=1356787585&sr=8-1
http://www.amazon.co.uk/Kingston-Technology-Apple-8GB-Kit/dp/B001PS9UKW/ref=pd_s im_computers_5
Kind regards
Nick

Thanks guys that is so helpful :-)
I will follow your advice Ogelthorpe & see how I get on with the job!!! Virgin territory for me so I may well shout for help once my MBP is in bits!! Is there a guide for duffers for this job anywhere??
& yes in an ideal world I would be replacing my old MBP but I'm just not in a position to do that at the moment....let's hope things pick up in 2013
All the very best
Nick

Replacment Hard Drive from third party vendor for old 3rd gen Ipod

I have a 3 generation 20gb ipod, and after it`s 10,000 drop the hard drive dies. For several months I seach the net for a company to buy a replacment Hard Drive from. I settle upon "Ipodmechanic.com" for my replacement part becuase, they have a one year warrenty, apple certified, and have slightly cheaper prices than there competitors, plus the website looks nice. Anyway I order a 10gb instead of a 20 because I want to save some money and I don`t need all that space.
I get the Hard Drive a couple of days later and install it. Oviously something is wrong from the start and I figure It can be fixed with a restore from the ipod updater. Instead of a fix I get the words can not initilize restore please restore again. The situation continues to repeat itself with not solution. I can not fix my Ipod and I am stuck with a $140 Hard Drive. Also the packege the Hard Drive came in had in permenet marker, the words and symblo (Bad ?). I am not angary at what they sent me wether used or new, as long as it works. But what makes me angry is after I bought the Hard Drive Ipodmechanic stopped answering my emails. I had to ask for there phone number because it wasn`t posted on there site. I can not get in contact with them and if so I must request my bank to sees the fund they have of mine. I don`t believe they are doing this on purpose, maybe they are on vacation or had an emergancy but, it would be nice if they would inform there customers they are away, but, still with no respones what choice is there when they have my $140 and a warrenty they can not make good on.
Third Generation Ipod Mac OS X (10.4.3)

You can get a HD like this. It uses wifi to and an app to access the HD
http://www.seagate.com/external-hard-drives/portable-hard-drives/wireless/wirele ss-plus/?cmpid=ppc-_-wireless-_-g-_-us-_-hdd%20%2Bwifi-_-b

I have a late 2011 mac book pro and I'm wondering if it uses SATA II or SATA III for the hard drive? Which eventually I'm going to replace with a SSD.

I was wondering if the late 2011 macbook pro uses SATA II or SATA III for the hard drive. The reseason I'm asking this is because some day I'm going to replace the Hard drive for a SSD drive down the road and would like to use all the performance of the SATA controler.

SATA III.

Cable for 2nd Hard Drive bay for HP ENVY 17

Hello everyone! I wanted to ask a question. I own an HP ENVY 17-J075EZ, and inside it there are two slots for hard disk including the primary already used from the hard disk ... Because I wanted to put a SSD but always keep the HDD, I wanted to know what it's called the second cable to connect a second hard drive and possibly the price and where to buy it! Thanks in advance!
This question was solved.
View Solution.

Hi,
Check the page 48, 49 and 50.
http://h10032.www1.hp.com/ctg/Manual/c03922401
Hard Drive Hardware Kit 720237-001

I work for a university and we have a legal apple vendor.Can we re-install macosx for a replacement hard drive for a old macbook?Just one example.

I work for a university and we have a legal apple vendor who we get to buy all our Apple products from.Can we (university) re-install macosx for a replacement hard drive once the hard drive gets replaced? How can we as the university IT department legally re-install macosx on a imac,macbook, macbookair etc. We would like to load customized macosx imaging software onto the mac machines(imac, macbook, etc ). The university has its own IT workshop and we would like our users to get their laptops back in the shortest turnaround time.

We're not "Apple Inc." here, just users like you.
So whatever we say is not an official statement, nor does it in any way, shape, or form represent the official or unofficial policies or opinions of Apple, Inc.
But I'll offer my quick opinion, having worked in information-systems and technology support in a wide variety of environments over many years.
Question #1. "NO!"
No tech support nor repair facility, even if "Apple-authorized", is automatically empowered to install or upgrade OS X on a replacement hard drive just because it is more convenient or time-efficient. When the repair is complete, the student should be expected to (re)install the operating system themself*!
Nurturing students (and occasionally dragging them, screaming and kicking!) as budding computer-, tablet-, smartphone-users to become digitally self-sufficient is a worthy goal that any institution of higher education must pursue.
Making students totally dependent upon "Mother Support" for every little thing about their personal digital devices is a grave disservice to both the students and the people who provide the support. Support-mothered students do become life-long digital dependents, instead of taking the required time to learn enough about the care and feeding of their digital "pets" to sustain them. Entreprenurial students may choose to become 'experts' and actually help each other with their devices, and even make money doing it. Some students may even be inspired/coerced to pursue a career in tech support!!!
*By all means, if the student requests additional help (re-installing the OS), then the University should charge the student a fair price for the service, provided that the user provides the OS on original or upgrade media, or in the case of the 'digital download' upgrades (for OS X 10.7 and 10.8) provides proof of purchase for the OS upgrade, or the original purchase receipt or other recognized documentation for the purchase of the computer showing the version of OS installed when purchased. Students need to learn about personal responsibility, economics ("What is MY time really worth"?), and proper record-keeping too!
Question #2. Regarding the customized imaging software, provide it on media or a link for students to download and install it. Make it their responsibility!
Message was edited by: kostby

What is the easiest way to tell if your time capsule has backed up your hard drive, as my mac has been recalled for a replacement hard drive

Your views would be appreciatted, my imac has recently been recalled for a replacement hard drive, would it be easier just to purchase a external hard drive to be on the safe side for backing up my photos etc?
I have a 1GB time capsule but to be honest not sure how it operates it states it oldest back up is the 11th October
201GB of 998 available or would it best to buy a external hard drive and back up using this.
thanks
Benjoe08

You are very wise.. !!
It can be awfully hard restoring the Mac from TM.. as many posters here have discovered.
IMHO.. for certainty.. get an external drive.. they are not expensive.. do a full backup to it.
I would even download superduper and make a clone of the existing drive and boot from it.. this means when the Mac is returned if all else fails.. you can use the external clone as a boot and have exact OS as you have right now.

AC cords for external hard drives?

okay! everyone uses external hard drives, yes?
It's great that they connect to computers via standardized ports & cables: USB, firewire, eSATA.
but why is it that the power cords for external hard drives are completely unstandardized?
I have an external USB enclosure that I can't use because I misplaced the AC cord (my bad!)
my question: is there a chart somewhere that shows the different types of power cords for hard drive enclosures (they're the same batch of options for monitors, external CDR burners etc, optical drives etc.)
thanks
Will

I think nerowolfe was referring to the types of AC "mains" appliance power cords, specifically to the connector on the end that attaches to an AC powered device like a computer or power brick. While there are a lot of connectors used for this, there are only a few commonly used in the computer industry. The two most common are the "universal" 3 blade ones used on Mac & most PC desktops & the "figure 8" two pin ones used on many laptop power bricks, as shown below.
It would be no problem to find one of those at a Radio Shack or similar store, but as Network 23 says, most external hard drives use separate DC power supplies, & they can be fitted with one of many types of small plugs. Gumsie's advice more or less applies to these, with the following important exceptions:
• Most drives require DC, not AC power. (Thus the plus & minus polarity markings.)
• The DC power supply characteristics are not completely specified by voltage & current numbers. Some power bricks supply a well-filtered, electronically regulated voltage that doesn't vary with the current drawn from it; others a poorly filtered voltage with substantial AC "ripple" components and/or an unregulated voltage that varies from well above the rated one at zero current down to the rated voltage at the rated current. The second type is intended for devices that do not have critical voltage requirements or contain built-in filtering & regulation. They will most likely damage or cause mis-operation in voltage-sensitive devices like hard drives even if their nominal ratings are correct.
• It is not always easy to tell the two types of power bricks apart but in general the regulated types use switching supply technology & as a result are much lower in weight than the cruder ones, which use relatively heavy iron core transformers. Also, because switching supplies can easily be made that accept a wide range of mains voltages, essentially all of the "universal" power bricks rated for 100 to 220 VAC inputs use switching supplies & often are fitted with a "figure 8" type mains connector so the same brick can be sold in different countries with a mains power cord supplied with an appropriate plug for that country's wall outlets. Typically, cheap "wall wart" supplies like those sold at Radio Shack are not the regulate kind & should be used with caution with sensitive electronics. It is especially important when using them to match both current & voltage rating as closely as possible to avoid the over-voltage problem.
• A few of the more sophisticated external supplies have special features like "fold-back" current limiting. In most regulated supplies, if an over-current situation is encountered, the supply limits the current by reducing the voltage to whatever level causes its maximum rated current to be supplied. This protects the supply but not necessarily the powered device, which may be damaged by a sustained low voltage condition. (This is particularly true for electric motors.) Fold-back current limiting basically shuts down the supply until the over-current condition is corrected, which protects the powered device more completely.
• Because of all of the above, it is always safest to use the power brick furnished as original equipment with the drive or to obtain a new one as a replacement part from the vendor. If you use anything else, you do so at your own risk & you may very well damage the drive if you are unlucky enough to make a bad choice.
• A little humor to lighten this up a bit: Did you know that all electronics devices are really smoke-powered? It's true! This explains why, if you let the smoke out, they quit working!

HT1661 My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy. I need to access the dead drive on the MBP via a 2008 iMac. Best options?

My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy. I need to access the dead drive on the MBP via a 2008 iMac. Best options?
I have ordered a 800 firewire to 800 firewire cable and am hoping to use the target mode option to copy files from the MBP.
Is this possible?
Hope so!
Any advice and or help would be greatly appreciated.
Many thanks,
Neil

Thanks Ogelthorpe.
Just bought an enclosure to try that also.
Hoping the MBP isn't really dead but just feigning death
Fingers crossed.

Replacement hard drive not shown in Disk Utility

So I just finished installing a replacement hard drive for my PB 12". I got a Seagate 2.5" ATA Momentus 5400 etc as per my previous thread. But after firing it up from the install disk, the new volume fails to show up. Anyone else had this problem? And fixed it? Opening up the case again now...

Don't know if your problem solved. Had the same thing happen to me. Was told that new HD was bad (unlikely), Logic board was bad (disaster). Then finally was tole by another tech (OWC) that it sounded like a bad cable connection. Took it apart again and reseated both ends of HD cable a couple of times. Started up and the HD recognized by disk utility. Works great since. Hope your problem as simple as mine.

Replacing hard drive and system recovery

I have a HDX 16 1155CA laptop running Windows 7 ultimate (upgraded from the pre-installed Vista). I recently dicovered a bad sector or several bad sectors on my hard drive using many diagnistics tools. SMART info indicates 3 pending sectors. Also,the hard drive failed the self test under BIOS self diagnostics. As my computer may be facing imminent hard drive failure, I'd like to replace the hard drive. Are there any HHDs with larger storage space and higer RPM compatable with this laptop? Also, i can't create a second set of recovery disks containg my current system and settings, how would I be able to recover my system/data and how should I back up all my current files?
Thanks.
This question was solved.
View Solution.

Hi:
You can use the Windows 7 backup and recovery system to make a ghost image of your current hard drive contents onto a portable hard drive. You will also have to make a boot CD which it will give you the option of doing, to access the recovery files, and reinstall your current configuration.
However, if I were you, I would back up any files, music and photos separately that I didn't want to lose, just in case the reinstallation fails.
While HP doesn't show any upgrades for your hard drive, I would imagine you would be safe installing up to a 640 GB 7200 RPM SATA drive. It is a modern enough PC.
You may also want to be on the safe side, and order a set of recovery disks for your notebook. They will be for Vista, but you can then go ahead and install W7 again. A set of recovery disks normally costs around $16.00.
Here is the link to your notebook's support page. Under the "Alerts for this Product" section, you can click on the blue link that states "How to Order Recovery Disks"
http://h10025.www1.hp.com/ewfrf/wc/product?product=3860262&lc=en&cc=us&dlc=en&lang=en&cc=us
Paul

Cable order important for replaced Hard Drive?

Similar Messages

Maybe you are looking for