Cache work area in background, when completed system become locked and non-responsive

I have a Windows 7 Ent x64 AMD AM3 965 system, 8gb memory with 2 1TB WD Black spin drives C: for programs and F: for cache.
My Disk Cache folder f:\AE Cache (50gb allowed) & Media Caches f:\AE MCache (Both cache folders total 32gb after caching)
I have a 2 minute long animation with serveral comps. (Screenshots of my application, basic simple tutorial)
Whenever I tell AE to ''cache work area in background'', my whole system starts to become slow, then at the end of the cache I try to open another comp or close program, it will lock up my system for a few minutes until it finished whatever else it needs to finish. When I close AE after background caching I can forget about doing anything for about 10+ minutes, not even able to open task manager to see what is going on because the system does not respond.
Occurs on my Work Station and Home PC.
Is this normal when ''Caching work area background'' and opening another comp or closing AE:CC?
File size of AE project 1.3mb, rendered = 29mb, 868x564 23.89fps, 16bpc, no sound, 2 min 10sec.

I wouldn't call it normal, but honestly the "Performance Cache" is simply garbage and has so many bugs, I'm not at all surprised. What I wrote back then still applies:
http://myleniumblog.com/2012/05/15/make-cs6-work-for-you/
Simply turn it off and you'll be a lot happier. Build conventional RAM previews to check your comp timing.
Mylenium

Similar Messages

TS2529 Im am using Windows 7 ,I log onto to itunes and connect my Iphone.When my iphone tries to sync it gives an error message "itunes has stopped working" - this only happens when i connect my iphone and it tries to sync - help please

Im am using Windows 7 ,I log onto to itunes and connect my Iphone.When my iphone tries to sync it gives an error message "itunes has stopped working" - this only happens when i connect my iphone and it tries to sync - help please

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

HT202774 Captions are not respected when turned off under Accessibility and still appear in the native player, how do I turn of captions?

Captions are not respected when turned off under Accessibility and still appear in the native player, how do I turn of captions for the native player?

Restart your computer while holding down left mouse key. That will eject the CD and your Mac will start as normal.
Lupunus

I updated imovie and I Used to be able to save as Quicktime file, now not an option & files are so large when I save as mpeg4 and just rename them. Please help!

I updated imovie and I used to be able to save as Quicktime file, now not an option & files are so large when I save as mpeg4 and just rename them. Please help!

Actually it is easier than I thought. It is H264 but the wrapper is m4v. You can just change that in the finder to .mov and drop it into iDVD. iMovie will send it to iTunes so just right click on it in iTunes and select reveal in finder and then copy/paste to desktop and change to .mov. Then drag into iDVD. Really easy.

When playing games on my iPod touch. Some are stutters and non responsive

Trying to play games on my iPod touch and they are slow, stuttery and non responsive. iPod software is up to date

Do the games require an internet connection? If so then maybe slow connection.
otherwise:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

HT1766 what do i do when my phone is locked and it says to connect to itunes?

what do i do when my phone is locked and it says to connect to itunes?

If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
     If you have forgotten your Restrictions code, then follow the instructions
     below but DO NOT restore any previous backup. If you do then you will
     simply be restoring the old Restrictions code you have forgotten. This
     same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
     1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
         of the cable connected to your computer's USB port.
     2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
         red slider appears, then slide the slider. Wait for the device to turn off.
          If you cannot turn off the device using the slider, press and hold the Sleep/Wake
          and Home buttons at the same time. When the device turns off, release the Sleep/Wake
          and Home buttons.
     3. While pressing and holding the Home button, reconnect the USB cable to the device.
         The device should turn on. Note: If you see the screen pictured below, let the device
         charge for at least ten minutes to ensure that the battery has some charge, and then
         start with step 2 again.
     4. Continue holding the Home button until you see the "Connect to iTunes" screen.
         When this screen appears you can release the Home button.
     5. If necessary, open iTunes. You should see the following "recovery mode" alert:
     6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

Backup does not sync automatically when connected to wifi, locked and charging

i have bought 200G on iCloud to back my iPhone up to iCloud. after ensuring all my setting are correct.... my phone still does not automatically back up to iCloud when connected to wifi, locked and charging. it has been one month now and my iTunes still says that my iPhone has never been backed up, i am still receiving notifications on my phone saying that i have never backed up my phone, i have searched the net for any possible solution and it seems i have all my setting correct but still it doesn't work. any help would be appreciated thanks

Just to be clear, it will automatically backup to iCloud not iTunes.
Make sure you have iCloud Backup turned on:
Settings > iCloud > Backup > turn iCloud Backup on
If it is already on, it will tell you when it was last backed up under the Back Up Now button

Unable to update, when executed table gets lock and Execution does not stop even for an hour.

Following is my Query, which unables to update. When Executed, table gets lock and Execution does not stop even for an hour.
update Employees
set Status = 'Close'
where statusid IN (select statusid
from MyView
where DownloadedDate ='2014-07-27 00:00:00.000'
here Employee contains 3,00,000 of records and Subquery return 1,50,000 Empid
i tried in various ways but not able to solve, statusid column have no index on, i tried using cursor but it does not work.
plz let me know how to solve this Issue, Its very Important to get solve as all my further work depends on Updation
, THANKS IN ADVANCE.

See also your other thread with the same question:
http://social.msdn.microsoft.com/Forums/en-US/80243625-fc3b-4ee1-bce1-4adcdbc16c14/unable-to-update-when-executed-table-gets-lock-execution-does-not-stop-execution-even-for-an-hour?forum=sqlserversamples
Olaf Helper
[ Blog] [ Xing] [ MVP]

Adobe photoshop cc crashes/ work area goes black when i try to insert text to a document ?

when i have eddited a photo and want to insert my watermark when i press the text tool the document goes black this also happens when i create new document and try to make a watermark but when i select another tool the photo re appears can any one help me already been on phone to adobe support they told me to reset all preferences but its stilkl hasnt worked
thanks scott !

Windows 8?
Upgrade the video card driver from the GPU maker's website (NOT Microsoft or a system builder).

CS5- screen working area turns black when cropping?

I am using CS5 and Windows 7. When I try and crop a photo, the working area turns black. Here is a screen clip of what I see. I then cancel the crop and will sometimes return to the move tool, click on the image, the black screen will return. Any suggestions or ideas why and what to do?

It's a display driver issue.
Have you installed the 12.0.1 update to Photoshop?
Have you updated your display drivers recently?
Have you tried disabling OpenGL drawing in Photoshop's preferences (to temporarily work around the issue)?

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

I am having problems downloading files from the web. After a number of files are downloaded, the system become sluggish, and then hangs. I traced the problem to the download history file: downloads.sqlite.

After downloading a number of 1.0 MB files, the system became very sluggish, and I started to get lots of (Not Responding) messages when trying to download or just use Firefox for browsing. Using Performance Monitor, I observed that the Firefox executable was growing larger and larger - up to as large as 1.2 GB on a system with 2.0 GB memory. Page faults were off the chart.
Looking for a similar problem, I found one that discussed the downloads.sqlite file becoming corrupted. I first noticed that this file was over 600 MB in size, so I deleted it. I then downloaded additional files, and observed that the new downloads.sqlite file would increase in size by about 150% of the size of each file that was downloaded. Once it would get up to 500 MB in size, the system started slowing down again.
I don't know the purpose of this file, but it appears that it keeps a full copy of every file downloaded, which may be the function of a download history file, but it does not seem correct that the file should grow in size without limit, and thus impact the system.
I would also appear that the Firefox executable is trying to read the entire contents of this file each time a new file is downloaded, which does not seem right.
Temporary fix is to periodically delete the downloads.sqlite file when it gets too large and starts impacting performance.. Apparently it is smart enough to open a new file if the old one is not found. I am not sure what the correct behavior for this file should be. Apparently is does not re-initialize when a new Firefox session is initiated.
Please feel free to contact me if more information is desired. I'm not sure what details you might need to troubleshoot this type of problem.

Hi Katy, and a warm welcome to the forums!
What is the exact name of the file?
Is it aim.bin?
Which requires either Stuffit Expander, or the Unarchiver to deflate.
http://www.apple.com/downloads/macosx/systemdiskutilities/theunarchiver.html

Shouldn't push work even when your phone is locked and "sleeping"?

I thought that was the whole point to get an instant notification?
It seems to me like i get a bunch of email notifications a few seconds after I unlock it but otherwise it sits there and does nothing...
This is over wifi right now I don't have a data plan.

I'm having the exact same issue with my 16gb 3Gs.
Push emails will arrive at seemingly random times (sometimes not at all) when the screen is locked.
If I unlock the screen and wait 2-3 seconds e-mail will arrive.
I do have a data plan (Well I'm supposed to) with Vodafone in the UK. Is this a fault with the iphone or is there something else that is causing this ?
Thanks in adavnce.

Locking and non-persistent changes in cache

I have a question regarding Optimistic locking and modifying objects in the cache.
I have a case where one client modifies a (persistent) object, but since it is a temporary change, which should not be persisted, it is not within a UOW. However, when the next client reads the same object, it gets the modified value and not the original value, which is not correct.
For the moment, there are no locking defined for the descriptors, but would Optimistic locking help in this case? Does this not only protect when you try to write a change on a stale object to the database?
If you run the risk that someone might change an object, and consequently change the cache and how the object is seen by others, should the reads be performed in a UOW?
Regards,
Katarina

Yes, if you may make changes to the object you must make the changes in the unit of work, even if you do not intend to commit the changes. Reads from the session are strictly read-only.

When my iphone4 is locked and I get a message, the sound does not go off when my phone is not on silent there fore i do not know when i have a message. Help?

So my iphone 4 is about 2 years old. Whenever I receive a message, my phone does not vibrate or make a sound. This happens even when my phone is not on silent, I dont know why this has happened. However when I receive a call, my phone goes off. I dont know why this happens. Am i the only one that's experienced this?

Yes i have, and its all set to be fine. When my phone is unlocked all the sounds work, it's only when it is locked

Cache work area in background, when completed system become locked and non-responsive

Similar Messages

Maybe you are looking for