Caching whole Application Object[in addition to swf]

My whole application is written in JSF. I am using SWFobject
to embed Flex component in a JSF page[which just contains Flex swf
only]. Now the user can click a button on JSF application and can
navigate to this JSF page[with Flex application embedded], and he
can again click a button on the Flex application and move back to
original JSF application.Now the issue is when the user moves from
original JSF page to Flex embedded JSF page he looses the old state
of the Flex application.
Here is the use case :
1.) User is on main JSF page and hits button to navigate to
another JSF page which has Flex application embedded using
SWFObject.
2.) on the Flex application He has tree on the left side and
some interactive images on the right side and the bottom portion of
the screen has tabs displaying some information corresponding to
each node.Everytime he clicks on a node on the tree I create a new
Tab on the bottom portion and display corresponding information
which gets fetched from the backend.
3.) Now lets say he clicked on two nodes and current state of
application is tree is expanded second node is selected and some
intercative images are displayed on the right side and two tabs are
created on the bottom of screen with some info.
4.) Now user decides to go back to original JSF
application(he hits a button on the present screen to take him back
to original JSF page).
5.) Now when the user tries to navigate back to Flex
application, he looses all the previous state of the Flex
application.
So My question is, is there a way that old state of the flex
application be saved.this different then caching swf, which I am
already doing, But I do not want the SystemManager to create a new
instance of application object (because in that case I will loose
all the components and there previous states), but instead use the
last saved application instance bypassing all the lifecycle of
application object and adding the existing application instance to
the display list directly].
I want to know whether this is even possible???
1.) Can I store the application instance somewhere somehow.
2.) Tell SystemManager to use this applicationInstance rather
than instantiating a new one.
If its not possible then what are the alternatives to achieve
same kind of behavior?

"vikbar" <[email protected]> wrote in
message
news:gb0tug$7je$[email protected]..
> Hi Amy,
>
> Isnt the HistoryManager approach more specific to Flex
application i.e if
> user
> is just navigating with in the flex application? In my
case the user will
> navigate between a JSF page which does not have any SWF
file and the
> another
> one which has swf file embedded. Now everytime when the
suer moves to the
> flex
> embedded JSF page from the Non Flex JSF page these are
the steps which are
> always going to happen :
>
> 1.) System Manager will get initialized and will create
PreLoader
> instance.
> 2.) The preLoader will then try to download the swf
file. Now since this
> is
> the second time the user is coming back to the flex page
so the broswer
> would
> have already cached this swf, so Preloader will skip the
downloading
> swf/RSl
> step and hence you wont see any initialization progress
bar.
>
> 3.) New Application object will get instantiated and
will go through its
> whole
> lifecycle.
>
> So, I guess historyManager approach will work only if
the user stays on
> the
> flex application only and navigates with in flex
application itself(so in
> that
> case if the user clicks back then it knows which flex
component or view to
> display), but in my case user will completely move away
from flex page to
> a
> JSF page and then will try to come back.
>
You'd need to put the right stuff in the url to make it work,
just like if
you were calling a page that's expecting GET params. I don't
really use the
HistoryManager, so you'll need to either look into this
yourself or ask
someone who knows more about it.
HTH;
Amy

Similar Messages

Is there a way to activate the whole application in Non Development system?

Hi All,
Is there a way to activate the whole application in Non Development system? Using some BRF Plus Tool.
We copied a sample application and customized the same as per our requirement. The same is then released to Test System for testing. On Test system this application with all component is in non-active state. We re activated the application with all the component and released it to Test System. But still the application is inactive.
Application is a of storage type system and so cannot use changeability exit to activate on test system.
TR log shows imported with error. Below is the extract of the error:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
BRF+: Runtime client: 000 / target client: 400
BRF+: Object activation of new version started for 418 object IDs
BRF+: <<< *** BEGIN: Content from Application Component CA *** >>>
BRF+: <<< BEGIN: Messages for IDs (53465BA36D8651B0E1008000AC11420B/ ) Table 'Dunning Proposal Line Items (Table)' >>>
No active version found for 23.04.2014 08:14:10 with timestamp
No active version found for IT_FKKMAVS with timestamp 23.04.2014 08:14:10
No active version found for IT_FKKMAVS with timestamp 23.04.2014 08:14:11
BRF+: <<< END : Messages for IDs (53465BA36D8651B0E1008000AC11420B/ ) Table 'Dunning Proposal Line Items (Table)' >>>
BRF+: <<< *** END : Content from Application Component CA *** >>>
BRF+: Object activation failed (step: Activate )
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
BRF+: Import queue update with RC 12
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Errors occurred during post-handling FDT_AFTER_IMPORT for FDT0001 T
FDT_AFTER_IMPORT belongs to package SFDT_TRANSPORT
The errors affect the following components:
   BC-SRV-BR (BRFplus - ABAP-Based Business Rules)
Post-import method FDT_AFTER_IMPORT completed for FDT0001 T, date and time: 20140423011412
Post-import methods of change/transport request DE1K901989 completed
     Start of subsequent processing ... 20140423011359
     End of subsequent processing... 20140423011412
Any help would be appreciated.

Is IT_FKKMAVS part of the same transport request or was it sent already earlier?
You may have a look at the request if it was OK. Probably not.
Maybe in the meantime more requests reached the system that now have in combination solved the problem. What is your release and support package level?
Higher versions of BRFplus have a lot of automatic correction mechanisms built into it.
E.g. problematic imports are collected in an import queue. As soon as a request comes in that fixes any problems the after import processing for faulty imports is automatically redone.

Application object content search across multiple (many) objects

Hi guys,
I have about 500 application objects and one of these is pushing through
a bad registry setting.
I know what the setting is, but how do I search across all of them quickly.
Thank you,

The easiest thing to do is to search c:NALCACHE for the string desired.
I don't have ZEN at my current location so I can't be 100% sure, but I
believe much of the info in these cache files is stored in pseudo
english so a search may work.
The info is stored in DS in a manner that is less easily retrievable.
(I.E., Pull up DSReports and browse the object, you will not see all of
the entries.)
As I am thinking, at my last job I ran a nightly routine that exported
all apps to AOTs using the ZFD3 toolkit and than ran another tool from
the kit to convert the AOTs to AXTs. Then I could do an easy file find
on all of my apps. The list of apps was generated using a tool from
JRBSoftware. I don't have the script anymore, but is you are skilled at
scripting, that may give you an idea for something that my become a
multi-purpose tool for you.
chebarushka wrote:
> Hi guys,
>
> I have about 500 application objects and one of these is pushing through
> a bad registry setting.
>
> I know what the setting is, but how do I search across all of them quickly.
>
> Thank you,
Craig Wilson
Novell Product Support Forum Sysop
Master CNE, MCSE 2003, CCN

POrtal application object - Abstract Portal Component, Location dropdown.

Hi
I am creating a Portal application project in NWDS.
Inside this project I am creating a POrtal application object -> Abstract Portal Component.
Now, there is a dialigue box which appears, prompting for object name and package.
In the same dialogue box there is an additional dropdown box for Location.
It has two values "api" and "core".
What does these mean.
Thanks

The location of the new Java class file determines whether other applications can reference the classes. Generally, the choice is only meaningful when defining services and the interfaces to make available to those applications the reference the service.
You can specify one of the following:
■ Core (default): Places the file in the src.core project directory, and makes it private.
■ API: Places the file in the src.api, and makes it public.
Regards,
Khushboo

Pre-load the Cache during Application-Start Up

Our requirement is to pre-load the cache during the application start-up most probably during Authentication/Authorization Service is invoked.
We plan to load the data for other services from database into Coherence cache so that when user access that particular service he ends up hitting the Cache instead of database.
Any pointers/suggestions on how to pre-load the cache during application start-up would be greatly appreciated. We are using Spring, Hibernate, Weblogic Web Services
Regards,
Bansi

Hi Bansi,
I were using following approach.
First, we never use CacheFactory.getCache() in application code instead all instances of named cache were injected.
On server side, I have an CacheInitializerBean which were starting cache preloading process (in separate thread). After preloading a special marker entry were put to the cache, indicating what data in the cache are consistent.
When injecting named cache instance, we use a factory. This factory use CacheFactory.getCache() internally, but it check presence of marker object in cache an blocks until marker object will appear.
Well in practice things are little more complicated but this is basic idea.
Preload cache asynchronously and use marker to indicate completion of loading process.
Hope this will help.
Regards,
Alexey

SWFLoader problem(make the whole application zoomed in Mac)

Hi,
I am using swfloader to load an swf. Everything works on different browsers in pc(safari, chorme, IE and ff). But when I launch this in safari in mac machine. whiling the application loading he swf file(same swf file(the size is 1024*720), whole application zoom in(everything become bigger).
Any help is appreciated.
flash player version 10.1
Thanks

This bug seems only happened if your screen's resolution is not a native resolution. For example, if your screen's native resolution is 1650*1024 and you set your screen resolution to be 1440 * 1050, the whole application will be zoomed once you are trying to loader a swf.
I believe this is a bug of flash player.

Changing a color for the whole Application

Hi,
Is there a way to change the color, default purple of swing to some other color(say green) for the whole application without using themes? Is it possible through UIManager.put()?
Regards
Sridhar

Thanks Michael,
I just modified your code to fit my needs.
import java.awt.*;
import javax.swing.*;
import java.util.Enumeration;
class ApplicationColor
public ApplicationColor()
    setApplicationColor(new Color(88, 140, 165));
    JFrame frame = new JFrame();
    frame.setLocation(400,300);
    frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    JPanel jp = new JPanel(new BorderLayout());
    String[] temp = {"abc","123"};
    JComboBox cbo = new JComboBox(temp);
    JButton btn = new JButton("I'm a button");
    jp.add(new JLabel("I'm a label"),BorderLayout.NORTH);
    jp.add(cbo,BorderLayout.CENTER);
    jp.add(btn,BorderLayout.SOUTH);
    frame.getContentPane().add(jp);
    frame.pack();
    frame.setVisible(true);
public void setApplicationColor(Color color)
    Enumeration enum = UIManager.getDefaults().keys();
    while(enum.hasMoreElements())
      Object key = enum.nextElement();
      Object value = UIManager.get(key);
      Color jfcBlue = new Color(204, 204, 255);
      Color jfcBlue1 = new Color(153, 153, 204);
      if (value instanceof Color)
           if(value.equals(jfcBlue) || value.equals(jfcBlue1)){
                UIManager.put(key, color);
public static void main(String[] args){new ApplicationColor();}
}Sridhar

Application object BUPA: Table TSADC does not exist

Hi All,
When I try to create a Business Partner in transaction fmcac1, I get the message Application object BUPA: Table TSADC does not exist, especially when I try to go back to the Address tab after clicking on any other tab on that screen. I have tried to add the table in trans BUSG but I don't know what I am supposed to assign as the FM, for example.
I have also used the trans BUSB to try to delete the entry for TSADC but it says 'do not make any changes (SAP Entry.)' Can u pliz assist with the information I have requsted above or prescribe another solution.
Thanx in advance.

For the benefit of others, I was able to solve the problem by removing the entry to the RIGHT, not the WHOLE entry (which refuses becoz it's an SAP entry). This is through transaction BUSB.

Controling objects in a loaded swf at any given time

I want to communicate with an object within a loaded swf. I know I can use this event listener and function to do so right when the swf has completed loading:
imageLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, loadSections)
    function loadSections(event:Event):void
            event.target.content.mc.y+=2
But I want to be able to manipulate a given object from the loaded swf at any time not just when the loading is complete. So basically as long as the swf is loaded, is there a way to manipulate objects and call functions within that swf?
Both the external and host swf are AS3.
Thanks

I'll just try to add to what Ned already told you.
IF (and only if) I understood what you're trying to do, all you want is press a button to load a new SWF and then click the loaded swf to unload it, right?
If this is what you want, I think you have to understand that a loader IS a displayObject and it CAN be added to the displayList. It took me a lot of time to understand this so maybe this is where you're having trouble to "think" your application (and I guess it is because you're using holder.addChild(imageLoader);, which is not wrong).
Since a loader is a displayObject that can be added to the displayList, you don't really need a another displayObject do hold it, like a holder.
You can simple use addChild(imageLoader);
Doing so, you will have a "loader" on stage working just like anyother displayObject. You can add listeners to it, you can remove it from stage, change its location and all.
So, as Ned said, when you add a loader to the stage, if you want to remove it, go ahead an remove it!
removeChild(imageLoader);
//or, in your case:
holder.removeChild(imageLoader);
The only thing here (as far as my knowledge goes) is that the loaded content still exists EVEN if it doesn't exist on the displayList anymore. That's why you MUST unload it TOO.
imageLoader.unload();
Doing so you'll send the loader content for GarbageCollection and this will be deleted when more memory is needed.
Another best practice I've noticed is that you should avoid from "creating" a loader from withing a function.
Well, just to give you an idea of what you can do:
import flash.events.MouseEvent;
var req:URLRequest = new URLRequest("external.swf");
var loader:Loader = new Loader();
//A button we have on the timeLine.
myBtn.addEventListener(MouseEvent.CLICK, onClick);
function imageLoaded (e:Event):void {
     addChild(loader);
     loader.addEventListener(MouseEvent.CLICK, unloadAndRemove);
     trace (loader is DisplayObject);
function unloadAndRemove (e:MouseEvent):void {
     e.target.unload();
     removeChild(loader);
function onClick(e:MouseEvent):void {
     loader.contentLoaderInfo.addEventListener(Event.COMPLETE, imageLoaded);
     loader.load(req);
I hope it helps.

Help!Cache status of object for Central Adapter Engine is incorrect

this problem cconfused me several days!
version:PI 7.1
after i activate the communication channel, the cache not update for central adapter engine
problem: in cache status overview, the update for central adapter engine not yet started, but notification is ok.
the update for integration server and mapping run time are all correct.
then when i display wsdl for sender agreement(SOAP sender), show message:Cache status of object abcd123 for Central Adapter Engine is incorrect
if i ignore this message, error message popup:dapter Engine af.xid.sapittest for communication channel abcd123 not registered in SLD
who can help me solve this problem.
thank you in advance.

Hi cheng,
Kindly check if you have set theparameter 'com.sap.aii.connect.integrationserver.sld.name' in your
Exchange Profile, since it's not set by default. Open note #1278563 and follow the procedures.
And you may check the following notes:
#1031321 - Self-Registration of Adapter Engine and RWB fails
#1334053 - No automatic PI 7.10 SLD Registration (Here you'll see the note 764176 which you have already applied and also the note #1117249).
In RWB, is the adapter Engine "red light"? If yes, what is the specific error?
Regards,
Caio Cagnani

Invalid method "Save As" from Excel application object

I have Windows 2000 and Excel 2002 installed on my machine.
I down loaded "renamed Excel 2000 workbook.vi" from NI website. Relinked ref num to Excel application object but get the error of invalid method (Save As). Tried to relink invoke node to Save As by selecting method from drop down menu. However this method is not on the list. Tried other excel objects but can not find "Save As" method. Has this been removed/moved?

I was able to correct the error by relinking the Workbooks->Open to Open. This changes the subsequent Invoke Node from IAppEvents to _Workbook. There you will find the Save As method.
Michael
www.abcdefirm.com
Michael Munroe, ABCDEF
Certified LabVIEW Developer, MCP
Find and fix bad VI Properties with Property Inspector

How to Use AccessibleObjectFromWindow API in VBA to Get Excel Application Object from Excel Instance Window Handle

I need to get the Excel.application object from a window handle using AccessibleObjectFromWindow. I can't seem to make the code work. First, I successfully search for the XLMAIN windows. Then, when I get a handle, I execute the AccessibleObjectFromWindow
function. It seems to return a value of -2147467262 in all cases. Therefore, I believe that it is returning an error value. I can't figure out how to determine the meaning of this value.
If it is an error value, I believe that one or more arguments are in error. My best guess at present is that the GUID argument is incorrect. I have tried two GUID values: {00020400-0000-0000-C000-000000000046} and {90140000-0016-0409-0000-0000000FF1CE}.
I have seen both used in conjunction with OBJID_NATIVEOM. Neither one seems to work. I really would prefer not to use the second one as it has an Excel major and minor version number. I would hate to have to change this code, if a new minor version appeared.
The attached code has been commented to show which parts have been shown to work and which not. I'm at my wits end and really need help.
Thanks
'This module is located in Access 2010, but this is an Excel question.
Option Compare Database
Option Explicit
' Module-Level Declarations
'The GetDesktopWindow function and FindWindowEx function work just fine.
Public Declare Function GetDesktopWindow Lib "user32" () As Long
Public Declare Function FindWindowEx Lib "user32" Alias "FindWindowExA" _
(ByVal hWnd1 As Long, _
ByVal hWnd2 As Long, _
ByVal lpsz1 As String, _
ByVal lpsz2 As String) _
As Long
'I'm not getting the expected output from this function (see below)
Private Declare Function AccessibleObjectFromWindow& Lib "oleacc.dll" _
(ByVal hwnd&, _
ByVal dwId&, _
riid As GUID, _
xlwb As Object)
Type GUID
lData1 As Long
iData2 As Integer
iData3 As Integer
aBData4(0 To 7) As Byte
End Type
Function ExcelInstances() As Long
' Procedure-Level Declarations
' Value of OBJID_NATIVEOM verified by checking list of Windows API constants _
on this site: http://www.lw-tech.com/q1/base.htm
Const OBJID_NATIVEOM = &HFFFFFFF0
Dim hWndDesk As Long 'Desktop window
Dim hWndXL As Long 'Child window
Dim objExcelApp As Object 'Final result wanted: Excel application object
'Following variable (xlapp) to be set by AccessibleObjectFromWindow function
Dim xlapp As Object
Dim IDispatch As GUID 'GUID used in call to AccessibleObjectFrom Window function
'Set up GUID to be used for all instances of Excel that are found
Dim tmp1 As Variant 'Return value from AccessibleObjectFromWindow
' Executable Statements
SetIDispatch IDispatch
IDispatch = IDispatch
'Get a handle to the desktop
hWndDesk = GetDesktopWindow 'This seems to work
Do
'Get the next Excel window
'The following statement seems to work. We are finding and counting _
correctly all the instances of Excel. hWndXL is non-zero for each _
instance of Excel
hWndXL = FindWindowEx(GetDesktopWindow, hWndXL, "XLMAIN", vbNullString)
'If we got one, increment the count
If hWndXL > 0 Then
'This works. We correctly count all _
instances of Excel
ExcelInstances = ExcelInstances + 1
'Here is the problem. The following statement executes and returns a value of _
-2147467262. xlapp, which is passed by reference to AccessibleObjectFromWindow, _
is set to nothing. It should be set to the object for Excel.application. _
I believe that this value is not an object. I tried to reference tmp1. in the _
immediate window. There was no Intellisense.
'I think that the function in returning an error value, but I can't figure _
out what it is. I believe that AccessibleObjectFromWindow returns error _
values, but I don't know where to find their values so I can interpret the _
function's results.
'As best I can tell, the hWndXL parameter is correct. It is the handle for _
an instance of Excel. OBJID_NATIVEOM is set correctly (see constant declaration _
above). xlapp is passed by reference as a non-initialized object variable, which _
will be set by AccessiblObjectFromWindow. IDispatch may be the problem. It is set _
as shown below in the procedure SetIDispatch(ByRef ID As GUID). This procedure _
appears to work. I can see that IDispatch is set as I intended and correctly _
passed to AccessibleObjectFromWindow.
tmp1 = AccessibleObjectFromWindow(hWndXL, OBJID_NATIVEOM, IDispatch, xlapp)
'Need to write code to test tmp1 for error. If none, then set objExcelApp = _
object. Also, I exect xlapp to be set to Excel.application
End If
'Loop until we've found them all
Loop Until hWndXL = 0
End Function
Private Sub SetIDispatch(ByRef ID As GUID)
'Defines the IDispatch variable. The interface _
ID is {90140000-0016-0409-0000-0000000FF1CE}.
'NOT USING {00020400-0000-0000-C000-000000000046}, _
which could be the problem
'9 is release version - first version shipped (initial release)
'0 is release type - retail/oem
'14 is major version
'0000 is minor version
'0016 is product ID - MS Excel 2010
'0409 is language identifier - English
'0 is x86 or x64 - this is x86
'000 reserved
'0 is debug/ship
'000000FF1CE is office family ID
With ID
.lData1 = &H90140000
.iData2 = &H16
.iData3 = &H409
.aBData4(0) = &H0
.aBData4(1) = &H0
.aBData4(2) = &H0
.aBData4(3) = &H0
.aBData4(4) = &H0
.aBData4(5) = &HF
.aBData4(6) = &HF1
.aBData4(7) = &HCE
End With
End Sub
DaveInCalabasas

I don't think you can return a reference to Excel's main window like that as you are attempting to do.
Ref:
http://msdn.microsoft.com/en-us/library/windows/desktop/dd317978(v=vs.85).aspx
It's relatively straightforward to return any workbook's window in any given instance, and in turn it's parent Excel app. Try the following and adapt as required (and include error handling) -
Option Explicit
Private Declare Function FindWindowEx Lib "User32" Alias "FindWindowExA" _
(ByVal hWnd1 As Long, ByVal hWnd2 As Long, ByVal lpsz1 As String, _
ByVal lpsz2 As String) As Long
Private Declare Function IIDFromString Lib "ole32" _
(ByVal lpsz As Long, ByRef lpiid As GUID) As Long
Private Declare Function AccessibleObjectFromWindow Lib "oleacc" _
(ByVal hWnd As Long, ByVal dwId As Long, ByRef riid As GUID, _
ByRef ppvObject As Object) As Long
Private Type GUID
Data1 As Long
Data2 As Integer
Data3 As Integer
Data4(7) As Byte
End Type
Private Const S_OK As Long = &H0
Private Const IID_IDispatch As String = "{00020400-0000-0000-C000-000000000046}"
Private Const OBJID_NATIVEOM As Long = &HFFFFFFF0
Sub test()
Dim i As Long
Dim hWinXL As Long
Dim xlApp As Object ' Excel.Application
Dim wb As Object ' Excel.Workbook
hWinXL = FindWindowEx(0&, 0&, "XLMAIN", vbNullString)
While hWinXL > 0
i = i + 1
Debug.Print "Instance_" & i; hWinXL
If GetXLapp(hWinXL, xlApp) Then
For Each wb In xlApp.Workbooks
Debug.Print , wb.Name
Next
End If
hWinXL = FindWindowEx(0, hWinXL, "XLMAIN", vbNullString)
Wend
End Sub
'Function GetXLapp(hWinXL As Long, xlApp As Excel.Application) As Boolean
Function GetXLapp(hWinXL As Long, xlApp As Object) As Boolean
Dim hWinDesk As Long, hWin7 As Long
Dim obj As Object
Dim iid As GUID
Call IIDFromString(StrPtr(IID_IDispatch), iid)
hWinDesk = FindWindowEx(hWinXL, 0&, "XLDESK", vbNullString)
hWin7 = FindWindowEx(hWinDesk, 0&, "EXCEL7", vbNullString)
If AccessibleObjectFromWindow(hWin7, OBJID_NATIVEOM, iid, obj) = S_OK Then
Set xlApp = obj.Application
GetXLapp = True
End If
End Function
Note as written if an instance does not have any loaded workbooks a reference will not be returned (though a workbook can be added using DDE, but convoluted!)
FWIW there are two other very different approaches to grab all running Excel instances though something along the lines of the above is simplest.
Peter Thornton

Two part question 1) what happens if you sign into messages beta on os x lion 10.7.5 after it expired? does the whole application not work or just imessage? 2) does installing messages beta on os x lion 10.7.5 delete ichat?

Two part question
1) what happens if you sign into messages beta on os x lion 10.7.5 after it expired? does the whole application not work or just imessage? can you stil use AIM, jabbar, google talk, or yahoo? if you open messages beta does it immediately tell you that messages beta expired?
2) does installing messages beta on os x lion 10.7.5 delete ichat or just transform ichat into messages beta giving the illusion that ichat is deleted?

Hi,
It was never completely clear whether it was just hidden or whether Apple ran a download page for iChat 6.
As the Download for Messages Beta was separate and "Deleted" iChat it would seem it would be another download for iChat 6.
iMessages will not function as it is only an Account type within Messages and iChat 6 does not have it.
Therefore messages on the iPhone will not sync to the Mac. (until you get Mountain Lion and Messages in that OS X version).
Mountain Lion and it's full version of Messages will not sync the iMessages that have happened in between the 14th December 2012 (end date of Messages beta) and the Install of Mountain Lion if you decide on that route.
8:51 PM Sunday; May 5, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Error 1603 in deploying Office 2003 by creating an application object using its MSI package!

Hello,
I got the error of 1603 when I ran Office 2003 MSI package through NAL. I
have no idea how to resolve this problem. Even though I enabled logging in
Office 2003 installation, I still could not figure out what went wrong and
what caused the error.
I have used Snapshot to create an application object for a long time with
little problem. However, I could not successfully deploy any MSI package
created by an application object. I knew ZenWork Managing Application has
the feature, but I don't know how to make it work in our environment.
Do I have to know more about Microsoft Window Installer ?
Appreciate your comments and experience in advance
Thanks
Joe Liu
email: [email protected]

[email protected],
> I got the error of 1603 when I ran Office 2003 MSI package through NAL
>
Start here:
http://support.novell.com/techcenter...tation&x=0&y=0
Yes, understanding MSI helps. FWIW I have deployed 2003 this way.
- Anders Gustafsson, Engineer, CNE6, ASE
NSC Volunteer Sysop
Pedago, The Aaland Islands (N60 E20)
Novell does not monitor these forums officially.
Enhancement requests for all Novell products may be made at
http://support.novell.com/enhancement
Using VA 5.51 build 315 on Windows 2000 build 2195

How to store global values for the whole application to use ?

Hi,
In our application, we have global values that is store in a parameter table, I want only to query it once, and it will be used every where from the whole application.
e.g :
I have general parameter tables that store :
% Tax
Current Period
etc..
Then these values will be used in our business rules in the whole application.
How can I do that in ADF BC ?
Thank you,
xtanto

I would go ahead and create a transient VO with an attribute called "userLanguage" and store the value at the initialization step.
We generally call this type of VO as PVO which is a transient VO and contains only 1 record at any point of time. Keep this VO inside the RootAM and you can write a static util method as below..
public static String getUserLanguageFromPVO()
PVOImpl pvo = (PVOImpl)am.findViewObject("MyPVO");
if(pvo != null)
Row row = pvo.first(); //Always returns the one record
return (row == null ? null :
(String)row.getAttribute("UserLanguage"));
return null;
}

Caching whole Application Object[in addition to swf]

Similar Messages

Maybe you are looking for