Is there a way to activate the whole application in Non Development system?

Hi All,
Is there a way to activate the whole application in Non Development system? Using some BRF Plus Tool.
We copied a sample application and customized the same as per our requirement. The same is then released to Test System for testing. On Test system this application with all component is in non-active state. We re activated the application with all the component and released it to Test System. But still the application is inactive.
Application is a of storage type system and so cannot use changeability exit to activate on test system.
TR log shows imported with error. Below is the extract of the error:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
BRF+: Runtime client: 000 / target client: 400
BRF+: Object activation of new version started for 418 object IDs
BRF+: <<< *** BEGIN: Content from Application Component  CA  *** >>>
BRF+: <<< BEGIN: Messages for IDs (53465BA36D8651B0E1008000AC11420B/ )  Table 'Dunning Proposal Line Items (Table)' >>>
No active version found for 23.04.2014 08:14:10 with timestamp
No active version found for IT_FKKMAVS with timestamp 23.04.2014 08:14:10
No active version found for IT_FKKMAVS with timestamp 23.04.2014 08:14:11
BRF+: <<< END  : Messages for IDs (53465BA36D8651B0E1008000AC11420B/ )  Table 'Dunning Proposal Line Items (Table)' >>>
BRF+: <<< *** END  : Content from Application Component  CA  *** >>>
BRF+: Object activation failed (step: Activate )
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
BRF+: Import queue update with RC 12
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Errors occurred during post-handling FDT_AFTER_IMPORT for FDT0001 T
FDT_AFTER_IMPORT belongs to package SFDT_TRANSPORT
The errors affect the following components:
   BC-SRV-BR (BRFplus - ABAP-Based Business Rules)
Post-import method FDT_AFTER_IMPORT completed for FDT0001 T, date and time: 20140423011412
Post-import methods of change/transport request DE1K901989 completed
     Start of subsequent processing ... 20140423011359
     End of subsequent processing... 20140423011412
Any help would be appreciated.

Is IT_FKKMAVS part of the same transport request or was it sent already earlier?
You may have a look at the request if it was OK. Probably not.
Maybe in the meantime more requests reached the system that now have in combination solved the problem. What is your release and support package level?
Higher versions of BRFplus have a lot of automatic correction mechanisms built into it.
E.g. problematic imports are collected in an import queue. As soon as a request comes in that fixes any problems the after import processing for faulty imports is automatically redone.

Similar Messages

  • Is there a way to transfer the iTunes application to my PC using my iPhone? My PC has no means of connecting to the Internet and I do not wish to pay for Internet tethering for a one time use.

    Is there a way to transfer the iTunes application to my PC using my iPhone? My PC has no means of connecting to the Internet and I do not wish to pay for Internet tethering for a one time use. I don't have the app on my computer and I simply wish to have it on there to actually be able to transfer my files.

    You can transfer the app to your PC to save it, the article below will show you how:
    iTunes Store: Transferring purchases from your iOS device

  • Is there any way to download the Adobe Application Manager for Mac 10.5.8?

    I just subscribed to the monthly inDesign plan and was unaware I had to upgrade my system. Is there any way to download the Adobe Application Manager for Mac 10.5.8?

    LisaK78 wrote:
    I am trying to upgrade to Snow Leopard but I cannot figure out how to do it online. Do I actually need to purchase the disc and install it that way? Is there no way to download the update?
    See:
    Software update, upgrade--what's the difference?
    http://support.apple.com/kb/HT1444

  • Is there a way to stop the launching applications to come to foreground?

    Is there a way to stop the launching applications to come to foreground?
    Back with os 10.3 Panther or 10.4 Tiger the apps opened in the background. That was one of the good differences with Windows. I guess that 10.5 Leopard adopted this annoying Windows behavior. Hope it's gonna change with 10.7 Lion.
    (Of course I am looking for another solution than the AppleScript/Terminal launch that can be found on Google. I'd rather have a plist option to change if it exists!)

    I have found this page http://www.realsoftware.com/listarchives/realbasic-nug/2009-03/msg01167.html where it is proposed to add :
    <key>LSBackgroundOnly</key>
    <string>True</string>
    to MyApp.app/Contents/Info.plist
    I tried this but the app launches totally hidden in the background. Plus you have to set this behavior for every app.
    The open -g option works fine as expected.
    Still looking for a system-wide option, but it doesn't seem to exist.
    About the utility of such an option, I'll just remember you that some machine don't load apps very fast and, instead of waiting for an app to launch, the user will do something else until the app launches. You'll understand that waiting in front of a computer isn't acceptable and having a MBPro isn't possible for everyone.

  • Is there a way to change the ring tone to none for one particular contact?

    I see there is an option to turn the text message settings for a particular contact to 'none'.  Is there a way to change the ring tone to 'none' or 'silent' for only one contact.  This is a person who calls way too often and I used to turn their ringer to 'none' when I had a blackberry.  This way I can talk to this person when it is convenient for me and not have to listen to the ringer everytime they call.

    You need to sync a silent ringtone to your phone & then assign it to that contact. Here's one already made:
    http://richardkmiller.com/702/iphone-tip-use-a-silent-ringtone-to-screen-calls-i n-your-sleep

  • Is there any way to activate the keep identity setting when using a Transfer SQL Server Object Task?

    Is there any way to add the "Keep Identity" option to the tables selected for transfer in a Transfer SQL Server Object Task?  It seems that would be very useful, yet I can't find an easily available setting for it.  I would prefer to
    accomplish this within the Transfer SQL Server Object Task since it can copy any new fields added to the source tables, as opposed to having to rebuild a custom Data Flow Task any time a table structure is altered.  I thought setting "CopyPrimaryKeys"
    to True would do the trick, but I found that only ensures that the column settings are transferred; when the transfer happens, the destination id column is populated based on the specified seed and increment value, not what's actually in the source table. 
    I'd like to point out that replication isn't really an option here. This is a package that runs a few times a day to keep some data on our website up to date with data in our protected corporate environment.

    IIRW there is FastLoadKeepIdentity specifies
    whether to keep an identity in OLEDB destination 
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • Is there a way to get the IP address of a "remote" system on the LAN without using Share Screen and checking the network settings?

    I'm trying to better understand Mac's with respect to networking.  It seems that my computer should know the IP address of ever system listed on the Local Area Network, but all I see is the system name.  Is there a way to determine the IP address also?
    I have tried using "Get Information", but that produces no useful data.

    I'm trying to better understand Mac's with respect to networking.  It seems that my computer should know the IP address of ever system listed on the Local Area Network, but all I see is the system name.  Is there a way to determine the IP address also?
    I have tried using "Get Information", but that produces no useful data.

  • Is there a way to activate the WiFi sync option without my device connected (iTunes/ PC cannot see my iPad 2)?

    When I connect my device (iPad 2) to my PC via USB it isn't seen by both my PC and iTunes, it just charges so I know my USB isn't broke. I want to activate the WiFi sync option to sync my data on my iPad because I can't anymore. Earlier I had the option checked but I wanted to compare the speeds of syncing and I couldn't reactivate the setting.
    I have looked around and I have seen not one helpful forum or thread, they all lead to this link: http://support.apple.com/kb/HT1386
    Any useful information would be great!

    Howdy CalSeedy,
    The following article contains tips that can help get iTunes to recognize your phone again.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Allen

  • Is there any way to include the BizTalk Application Description after exporting the MSI?

    Anything I put in my biztalk app Description field(see first image), it shows up in the Comments attribute of the exported MSI file. But if I edit the
    Comment attribute(see second image) and then import the MSI file, the edited comment does not reflect in the BizTalk app description. How can I push that description from MSI file?

    You can’t set the comment/Description property of the msi from the msi file. MSI is read-only, any changes doesn’t affect the conent of the msi. An
    installer package is "compiled" by reading the instructions from the database and created as the .msi file.
    When you export an application as msi, its details are retrieved from
    BizTalkMgmtDb. In the case of description of the BizTalk application, it is retrieved from the
    nvcDescription
    column of the bts_application table.
    select nvcName,nvcDescription from dbo.bts_application
    Once msi has been exported it’s a complied package, any changes to the msi file are not updated to the content of the file. Same way when you import an msi into BizTalk, it actually create relavant
    entries into the BizTalk databases.
    Regards,
    M.R.Ashwin Prabhu
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • In iBooks, you can get a definition to a word, but it does not function on my wife's iPad is there a way to activate the dictionary? It's in English

    How can you get the dictionary to function in iBooks when it it not working?

    With the keyboard set to English, try typing a common word in Notes and then selecting it and tapping the Define option.

  • The "Find Faces" function is deactivated on iPhoto 9.5, in OSX Mavericks. Is there any way to activate / deactivate this function?

    Hello,
    Instead of deactivting the "Find Faces" Function, I would like iPhoto 9.5.1 to run this.
    On my MacBook Aluminium Late 2008, running Mavericks 10.9.3 this function is grayed out, and never run.
    Is there a way to activate this function?

    This procedure is a diagnostic test. It makes no changes to your data.
    Please triple-click anywhere in the line below on this page to select it:
    defaults read -app iPhoto PKFaceDetectionEnabled | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    Wait for a new line ending in a dollar sign ($) to appear below what you entered.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
    The Terminal window doesn't show the output. Please don't copy anything from there.

  • Is there a way to keep the checkmark or initials (Sign toolbar) active so that I can check a whole list of items without going back and forth to the button?

    Is there a way to keep the checkmark or initials (Sign toolbar) active so that I can check a whole list of items without going back and forth to the button?

    There is another way to "popup" the screen. Mute and then
    unmute the cellphone.
    Sheng-Chieh

  • Is there a way to activate facetime without pusing a button/touching the screen? Can you voice activate?

    Is there a way to activate facetime without pusing a button/touching the screen? Can you voice activate? I just bought the newest i-pad.

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
    You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

  • Is there a way to set the printed margins to zero. I want to fill the whole page, as much as the printer allows.

    Normally Firefox prints Title, URL, time and page number on the four corners of the printed page. I want to remove printing of this
    information and instead print the page out to the corners limited by
    what the printer allows. I know how to stop printing the URL etc. but then I get empty margins. I want to set this margins to zero so Firefox prints on the whole paper sheet. As it is now I will have to use another browser that doesn't insert unwonted margins.

    Is there a way to set the FOLDERS window in Adobe Bridge as a Column view like in Mac OSX Finder?
    No, but it is very nice idea, add it to the feature request page:
    http://feedback.photoshop.com/photoshop_family/

  • Is there a way to make the Twitter notification banner show the whole tweet, instead of just two lines?

    I am using TweetDeck for Desktop and just switched to a computer running Mountain Lion (10.8.5). I have the Notification Center configured to show Banner alerts when tweets from designated accounts are posted. Prior to running Mountain Lion, TweetDeck itself would show me a banner in the top right-hand corner of my screen, and that banner would include the full tweet.
    Now that I'm on Mountain Lion, it appears that the Notification Center has taken over the alert system. However, unlike the native TweetDeck banner, the Mountain Lion notification banner is limited to two lines, which means that, unless it's a very short tweet, I can't see the full tweet that has been posted. This is VERY inconvenient, as it means that I need to either open TweetDeck or open the Notification Center in order to see the full tweet.
    Is there any way to adjust the Notification Center banner to allow it to show the full tweet, instead of just the first two lines?

    You have 2 options:
    1. Create Video Playlists in iTunes (for example create one for Home movies, the other for Movies)
    You COULD make these Smart Playlists. (see below for one technique)
    NOTE: If you wish to do this don't miss the preference in Settings to enable Video Playlists at least  (at least in the latest ATV updates) I believe it's under Audio setting. Amazingly the default is NOT to show!! (had me going for quite a bit)
    2. Set up your Home Movies as "Music Videos" This has some gotchas:  like you'll probably want to choose the skip when shuffiling, also Now they'll appear in music lists. The only advantage to this is that it makes playlists more available on iOS devices since there are no Playlists displayed in the Videos App.... (yeah Apple's made this WAY confusing of late)
    If you wish to keep these clearly defined (especially for use with Smart Playlists.
    Select the movie
    Get Info (Edit Menu) (or Command-I Mac, Control-I, PC)
    Choose the "Video" Tab - you can select your desired type from the Media Kind pop up.
    Alternate method for setting up smart playlist of home movies would be to set the Genre to "Home Movie"
    Probably more than you needed to know - leigh

Maybe you are looking for