Calculating previous month and year of the previous month

Hi frenz,
Can anybody know FM to calculate the previous month and year of the previous month.
are there any standard FMs existed to achieve this?
br,
anil.

hi,
lv_period gives the month and year which is two months earlier now as we have specified lv_months as -2.
    DATA: LV_PERIOD LIKE S001-SPMON,
          LV_MONTHS(2) TYPE C VALUE '2-',
          LV_DATUM LIKE SY-DATUM,
          LV_NEWDT LIKE SY-DATUM,
        P_SPMON LIKE S001-SPMON VALUE '200601'.
    CONCATENATE P_SPMON '01' INTO LV_DATUM.
    LV_PERIOD = P_SPMON+0(6).
    CALL FUNCTION 'MONTH_PLUS_DETERMINE'
         EXPORTING
              MONTHS = LV_MONTHS
              OLDDATE = LV_DATUM
        IMPORTING
             NEWDATE = LV_NEWDT
         EXCEPTIONS
              OTHERS = 1.
     IF SY-SUBRC = 0.
       LV_PERIOD = LV_NEWDT+0(6).
     ENDIF.
WRITE :/ LV_PERIOD.
Regards,
Sailaja.

Similar Messages

Function module for getting month and year of the previous month (say -6)

Hi,
Is there a function module that will get you the month and year of say, a month before, and as far as 11 months ago.
For example, say today is 6/2007. I want 7 months ago.
How do i get this value?
What function module or method is available?
Points will be rewarded and responses will be appreciated.
Thank You,
John

Hi
lv_period gives the month and year which is two months earlier now as we have specified lv_months as -2.
    DATA: LV_PERIOD LIKE S001-SPMON,
          LV_MONTHS(2) TYPE C VALUE '2-',
          LV_DATUM LIKE SY-DATUM,
          LV_NEWDT LIKE SY-DATUM,
        P_SPMON LIKE S001-SPMON VALUE '200601'.
    CONCATENATE P_SPMON '01' INTO LV_DATUM.
    LV_PERIOD = P_SPMON+0(6).
    CALL FUNCTION 'MONTH_PLUS_DETERMINE'
         EXPORTING
              MONTHS = LV_MONTHS
              OLDDATE = LV_DATUM
        IMPORTING
             NEWDATE = LV_NEWDT
         EXCEPTIONS
              OTHERS = 1.
     IF SY-SUBRC = 0.
       LV_PERIOD = LV_NEWDT+0(6).
     ENDIF.
WRITE :/ LV_PERIOD.
OR
Use the following FM for getting the year and the month based on date
CACS_DATE_GET_YEAR_MONTH
or
Call Function 'CCM_GO_BACK_MONTHS '.
Funny module: 03/31/2002 - 1 month = 02/31/2002
OR
RE_ADD_MONTH_TO_DATE ( Add / substract month to/from date )
Need ur reward points.
Best regards,
Ravi

How can i get the month and year of the current open Periode?

At the beginning of each month the booking period for the new month was not open,but i need to book material automatically with the last day of the old month. The booking period will change at the first working day between 13 and 17 a clock. when the booking period was changed i have to book with the current date.
How can i do this ??
Regards
Ralf

Hi Ralf,
here's a complete example:
DATA: last LIKE sy-datum, "ultimo of last month
      gjahr LIKE t001b-frye1,
      buper LIKE t001b-frpe1.
last = sy-datum - sy-datum+6(2) .
PERFORM check_period.
IF sy-subrc <> 0.
ADD 1 TO last . "-> next month
PERFORM check_period.
IF sy-subrc <> 0.
    MESSAGE a001(00) WITH 'no open fi period'.
ENDIF.
ENDIF.
*formatting for germany
CONCATENATE last+6(2) last+4(2) last(4) INTO bbkpf-budat.
WRITE: / bbkpf-budat.
FORM check_period.
MOVE last(4) TO gjahr.
MOVE last+4(2) TO buper.
CALL FUNCTION 'FI_PERIOD_CHECK'
       EXPORTING
            i_bukrs          = bbkpf-bukrs
            i_gjahr          = gjahr
            i_koart          = '+'
            i_monat          = buper
       EXCEPTIONS
            error_period     = 1
            error_period_acc = 2
            OTHERS           = 3.
ENDFORM.                    " check_period
regards <a href="https://www.sdn.sap.com:443/irj/servlet/prt/porta
l/prtroot/com.sap.sdn.businesscard.SDNBusinessCard?u=i
Wo3ssHlIihvCrADIEGqaw%3D%3D">Andreas</a>
Message was edited by: Andreas Mann

New library did not give me folders divided by day, month and year. My previous one did. How do I make this happen?

Hi All
Just changed external hard drives and am setting up a new library to pull all the new locations together. How do I get the library to be subdivided by day, month, year? It came up just ordered by date but not subdivided. Seemed simpe but I have been at it for hours with no success.
Thanks,
Henry from Vermont

Rob
Thanks so much for the quick response.
History:
started in LR4 in PC
Moved to Mac and OSX with LR5 (Mac Pro Book retina with solid state drive
so fast)
I had my PC original photos on an external PC drive that was filling up and
only could be red by mac but not written.
Just bought a 1tb drive and formated it for Mac
Moved through finder all photos and LR catalogs from PC 640gig drive to new
mac formated 1tb and then imported them which did not take a long time and
did not bring originals into the mac. This was a new catalogue. I still
have the old one and the files on the PC external drive.
LR finds and displays these originals (a mix of raw and jpegs with a few
tifs. A 14 year collection, perhaps 18,000 images) but the list is not
subdivided in any way, just one large group of photos in date taken
sequence. The old catalogue was subdivided by day, month, year. I may
have created duplicates but have not checked. I had a backup copy of some
lost photos which imported.
My goal is to have all photos broken out by date. I must retain edited
results and would like to maintain meta data.
Is this enough info? What else would you like?
Thanks,
Henry

Can we modify the pnp selection screen and get only month and year?

Dear Freinds,
              I have requirement where i have to modify the PNP selection screen. So with the help of report category and coding in AT SELECTION-SCREEN OUTPUT , i have modified all the fields relating to dates . i.e i have removed all the radio buttons (i.e Today, Current month,current year etc) and finally
i have landed with only Period ( PNPBEGDA & PNPENDDA range) . But i dont want the PNPBEGDA & PNPENDDA range , but i want only is the month and year ( i.e just like the PNPPABRP & PNPPABRJ)
on my selection screen along with the pernr .
i have used the below code to close all the fields except pnpbegda and pnpendda.
AT Selection-Screen output.
loop at screen.
IF screen-group4 = '098' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-group4 = '092' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-group4 = '094' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-group4 = '100' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-group4 = '104' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    MODIFY SCREEN.
endloop.
i.e on my selection screen i want only month & year combination and pernr -
when iam using the logical database PNP . Could any one please let me know how can i get only mon & year only on my selection screen .
If it is possible please let me know .
Thanks & regards
divya.

Hi ,
   The requirement is that the user doesnt want to enter the date range i.e for ex: 01012008 to 31012008.
As per the requirement the user will enter only the month and year only . so i on the selection screen
i want only the month and year only . Is there any means i can modify the date period which is there by
default (PNPbegda and PNPendda) on PNP selection screen. Instead of we givign to the user the
PNPBEGDA and PNPPENDA i want is only month and year .
AS already the code has already been written and now they have asked that they want only the month and year on the selection screen.
Please suggest me in this regard.If iam hiding all the buttons relating the dates fields, and now if iam adding the parameters for the month and year it is coming below below the fields pernr , personnel ara and subara , company code , payroll area, employee group of the standard fields of PNP selection screen , there by any body could please suggest me how to change.
regards
divya.

Find the difference between two dates for the specific month and year

Hi,
I have two dates, start date is 30/12/2012 and end date is 04/01/2013. Using datediff I found the difference of days between two dates. But I find the no of days in January 2013. ie output is 4 instead of 6. I input month and year to find the no of days
for that date. In this case I input Jan 2013. How can I sql this ?

I don't understand how most of the answers provided here not analytically solving the problem with many cases possible.
First let me understand you:
You have 2 dates range and you want to calculate day range for specific month and year between the original date range.
declare @for_month int = 1 --January
declare @for_year int = 2013
declare @StartDate date = '2012-12-20'
declare @EndDate date = '2013-01-04'
SELECT
CASE
WHEN (DATEPART(MONTH, @StartDate) = @for_month and DATEPART(MONTH, @EndDate) = @for_month) and ((DATEPART(YEAR, @StartDate) = @for_year or DATEPART(YEAR, @EndDate) = @for_year)) THEN
DATEDIFF(DAY, @StartDate,@EndDate)
WHEN (@StartDate < cast(CONVERT(varchar(4), @for_year) + '-' + CONVERT(varchar(2), @for_month) + '-01' as date)) and (@EndDate between (cast(CONVERT(varchar(4), @for_year) + '-' + CONVERT(varchar(2), @for_month) + '-01' as date)) and (cast(DATEADD(d, -1, DATEADD(m, DATEDIFF(m, 0, cast( CONVERT(varchar(4), @for_year) + '-' + CONVERT(varchar(2), @for_month) + '-01' as date)) + 1, 0)) as date))) THEN
DATEDIFF(DAY, DATEADD(MONTH, DATEDIFF(MONTH, -1, @EndDate)-1, 0),@EndDate)
WHEN (@EndDate > cast(DATEADD(d, -1, DATEADD(m, DATEDIFF(m, 0, cast( CONVERT(varchar(4), @for_year) + '-' + CONVERT(varchar(2), @for_month) + '-01' as date)) + 1, 0)) as date)) and (@StartDate between (cast(CONVERT(varchar(4), @for_year) + '-' + CONVERT(varchar(2), @for_month) + '-01' as date)) and (cast(DATEADD(d, -1, DATEADD(m, DATEDIFF(m, 0, cast( CONVERT(varchar(4), @for_year) + '-' + CONVERT(varchar(2), @for_month) + '-01' as date)) + 1, 0)) as date))) THEN
DATEDIFF(DAY, @StartDate,DATEADD(d, -1, DATEADD(m, DATEDIFF(m, 0, @StartDate) + 1, 0))) + 1
WHEN ((DATEDIFF(DAY, @StartDate, cast(DATEADD(d, -1, DATEADD(m, DATEDIFF(m, 0, cast( CONVERT(varchar(4), @for_year) + '-' + CONVERT(varchar(2), @for_month) + '-01' as date)) + 1, 0)) as date)) >= 0) and (DATEDIFF(DAY, cast(CONVERT(varchar(4), @for_year) + '-' + CONVERT(varchar(2), @for_month) + '-01' as date), @EndDate) >= 0)) THEN
DATEDIFF(DAY, cast( CONVERT(varchar(4), @for_year) + '-' + CONVERT(varchar(2), @for_month) + '-01' as datetime), DATEADD(d, -1, DATEADD(m, DATEDIFF(m, 0, cast( CONVERT(varchar(4), @for_year) + '-' + CONVERT(varchar(2), @for_month) + '-01' as datetime)) + 1, 0))) + 1
ELSE
0
END as [DD]
I don't know how you calculate day range between 01/01/2013 and 04/01/2013
is 4, it is actually is 3 but if that is the case, you can add 1 from the condition.

Problem to insert only month and year instead of full date

select b.penjara_id, p.penj_lokasi, a.no_daftar, b.episod, b.nama1,to_char(a.trkh_mula_prl,'dd/mm/yyyy') as trkh_mula_prl, to_char(bulan_proses,'mm/yyyy') as bulan_proses,
b.epd, b.lpd
from prl_daftar_proses a, senarai_pesalah b, penjara p
where a.no_daftar=b.no_daftar
and a.episod=b.episod
and b.penjara_id = p.penjara_id
and a.setuju_jplp is null
and a.bulan_proses between to_date(:FROM,'dd/mm/yyyy') and to_date(:TO,'dd/mm/yyyy')
order by b.penjara_id, a.bulan_proses,a.no_daftarHi,anyone can help me how i can insert only month and year from the value that have full date in the database??
for example,the date is 09/18/2012, but i just want to insert 09/2012 as parameter. If i want to insert only one parameter, i can do that..But i have problem when I want to insert two parameters..

jeneesh wrote:
Welcome to the forum..
This..?
Assuming bulan_proses is a date without time part
select b.penjara_id, p.penj_lokasi, a.no_daftar, b.episod, b.nama1,to_char(a.trkh_mula_prl,'dd/mm/yyyy') as trkh_mula_prl, to_char(bulan_proses,'mm/yyyy') as bulan_proses,
b.epd, b.lpd
from prl_daftar_proses a, senarai_pesalah b, penjara p
where a.no_daftar=b.no_daftar
and a.episod=b.episod
and b.penjara_id = p.penjara_id
and a.setuju_jplp is null
and a.bulan_proses between to_date(:FROM,'mm/yyyy') and last_day(to_date(:TO,'mm/yyyy'))
order by b.penjara_id, a.bulan_proses,a.no_daftar
i got another problem..
before that.may i know what is the function of last_day?

Display month and year in dropdown list on selection screen

Hi
Can anyone tell me how to display months and year in a dropdown list on a selection screen?
also please tell me how to get the first and the last dates upon selecting the month and year on the dropdown list.
Month: January Year:2007 .
After selecting the required month and year, the first date and last date i.e '01.01.2007 - 31.01.2007' should be displayed on the right side.
Reward Points assured..
thanks,
Chetan

Hi..,
<b>
Just copy, paste and execute this program !!</b>
type-pools: vrm.
parameters : p_month(2) type n as listbox visible length 10,
p_year(4) type n as listbox visible length 10.
DATA : W_DATE type d, w_ldate type d.
initialization.
perform user_drop_down_list_fordt.
perform user_drop_down_list_foryr.
start-of-selection.
concatenate p_year p_month '01' into w_date.
call function 'BKK_GET_MONTH_LASTDAY'
exporting
i_date = w_date
IMPORTING
E_DATE = w_ldate
write /: w_date,w_ldate.
build user_drop_down_list
form user_drop_down_list_fordt.
data: name type vrm_id,
list type vrm_values,
value like line of list.
data: t_months type t247 occurs 0 with header line.
clear list. refresh list.
name = 'P_MONTH'.
select * into table t_months
from t247 where spras eq 'EN'.
sort t_months ascending by mnr.
loop at t_months.
clear value.
value-key = t_months-mnr.
value-text = t_months-ltx.
append value to list.
endloop.
Set the values
call function 'VRM_SET_VALUES'
exporting
id = name
values = list.
endform.
for year...
form user_drop_down_list_foryr.
data: name type vrm_id,
list type vrm_values,
value like line of list.
clear list. refresh list.
name = 'P_YEAR'.
do 9999 times.
clear value.
value-key = sy-index.
append value to list.
enddo.
Set the values
call function 'VRM_SET_VALUES'
exporting
id = name
values = list.
endform.
<b>
Hope this solves ur problem..</b>
regards,
sai ramesh

Date Picker: Only select Month and Year

Hallo,
I try to configure the Date Picker. For the users it should only be possible to select Month and Year. The column should be automaticly completed with the first day of the select month and a static time (00:00:00).
How can I do this?
Sincerly

You can't do that with a standard date picker. What you could do is to use it and after you change the value in it you modify the value using javascript and ajax similar to what I do in this example:
http://htmldb.oracle.com/pls/otn/f?p=31517:9
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Get month and year from date type

Hi all,
I need to get the month and year from the date type.
For example select to_date('2011-01-17', 'yyyy-mm-dd') from dual;Result needed:
01-2011Any ideas?
thanks in advance,
Bahchevanov.

Hello Bahchevanov,
if you need the date to compute something, then you can
TRUNC(SYSDATE,'mm')This will give you a date with the days removed -> 01.01.2011
Regards
Marcus

Displaying dates from 1 to 31/30/28 depending on month and year

Hi all,
I am working on oracle 10g, how can i display set of dates from (1 to 30) depending on month and year eg, for nov month if i run the query.. the output should be:
1
2
3
30
and this should be accomplished only by using SQL
Regards,
Sreekanth.

something like:
select level from dual
connect by level <= to_number(to_char(last_day(to_date('NOV-2009', 'MON-YYYY')), 'DD'))
/

I currently have an I5 and as with the previous I4, both buttons have failed and now my battery lasts almost six hours if I don't use it. I cannot upgrade my phone until March, 2015 even though I recently upgraded my phone to the More Everything Plan. Am

I currently have an I5 and as with the previous I4, both buttons have failed and now my battery lasts almost six hours if I don't use it. I cannot upgrade my phone until March, 2015 even though I recently upgraded my phone to the More Everything Plan. Am I destined to be a nonuser for three months until I can upgrade. This is very unacceptable as I've been a Verizon Wireless customer for probably 20 yrs!

As a 20 year customer of ours, we certainly appreciate your loyalty Richey_Rich. I know the importance of ensuring you have a properly operating phone. Can you please clarify which button on the device is not working? Is there any physical or water damage to your phone? Any applications that stay running?
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

HT201269 If we set up a device as new, is there a way to go back and restore from the previous phone?

If we set up an iPhone 5 as a new device, is there a way to go back and restore from the previous iPhone 4?

See How to Restore from a Backup Here > http://support.apple.com/kb/ht1766

I want to accumulate rain for the day, month and year; What formula can I use?

I want to accumulate rain for the day, month and year; What formula or expression can I use.
I am using a Rain Wise product that converts pulses to an analog value. The Rain Wise device can be
set to measure up to 1", 5", or 10". I will be setting the unit to 10 inches in increments of 0.01 inches.
What I would like to do is everytime the signal increments I would like to count it as 0.01 then after reaching
a period of time whether it be a day or a month reset back to zero.
Need some advise on this problem.
Solved!
Go to Solution.

Hello Ryan,
Lookout gets a Modbus over Ethernet signal which originates as a 4-20mA input to a Moxa Ethernet I/O Module (E1240) in the field. In Lookout I created a ModbusEthernet Driver and a tag which scales 0 - 65534 RAW to 0-10 Eng. [0 - 10 is inches of rain] Also, another piece of information is that after the rain gauge maxes out at 10 inches it will zero out and start over.
I though the accumulator was time based and took a sample over a specific time period, for instance, one sample every 30 seconds then accumulate. If this is so then if I have 5 inches of rain and then it stopped raining, then 30 seconds latter it would sample, it would see 5 inches and add that to be 10 inches when actually it had only rained 5 inches.
I really need some help with this process,
David Lopez
City of Corpus Christi

Can you buy Creative Cloud for a single month? Or do you have to buy the membership which lasts a year? If so can you cancel the membership after a month and only pay for that month.

Can you buy Creative Cloud for a single month? Or do you have to buy the membership which lasts a year? If so can you cancel the membership after 1 month and only pay for that month?
Thanks

Hello Tom,
You may sign up for a free trial of creative cloud which you can check out here. Download a free trial or buy Adobe products | Adobe downloads
You may either pay for a month to month membership or annual as listed here. Creative Cloud pricing and membership plans | Adobe Creative Cloud
Let us know if this helps!
Thank you,
Jo-Marie

Calculating previous month and year of the previous month

Similar Messages

Maybe you are looking for