Calculating the % in the query...

Hi,
There is a column in the query , which contains 0's and 1's.
I want to calculate the % of all 1's in the query as a result i.e
(counting all values <> 0/counting all values) * 100
Is is possible through formula??
Thanks.

Hi,
I tried that way also , but still its not wotking.
I put the problem again to make it more clear...
1) I have a formula which contains 0's and 1's ( Result calculated as summation)
2) I created New formula which counts all rows in the report.
   by putting =1 in the formula. I keep property of result as Summation.
   and sometime I tested even with counting all values option. But didnt get the result
3) I want to see the Final result in the report.
   eg. if I have total 20 records and 1 's are 5. Then result
   should display as 5/20*100 = 25 % ( In Overall result row).
But when I put the formula ( step1/step2*100 or step1%Astep2)
I get calculation done for all the rows.
But the final result row , Display 'X , which is the most important
value for report and is not calculated.
Is there anyway to calculate the Overall % ?
Let me know if I miss anything/step.
Thanks.

Similar Messages

How to use a calculated column in the same query

Hi All,
I need some help with using a calculated column in the same query.
For eq
I am joining a couple of tables and some of the select columns are calculated based on the columns of the tables and i want a new column in the same query to use this calculated feild in some other calcualtion.
something like this...
select (12+3) as Sum1, (12-3) as Sum2, (Sum1 + Sum2 ) as Sum3
from dual
or
select (12+3) as "Sum1", (12-3) as "Sum2", CASE WHEN ( "Sum1" / "Sum2" * 100 > 0 ) THEN 'Yes' ELSE 'No' END
from dual
Thanks

user548171 wrote:
select (12+3) as Sum1, (12-3) as Sum2, (Sum1 + Sum2 ) as Sum3
from dual
or
select (12+3) as "Sum1", (12-3) as "Sum2", CASE WHEN ( "Sum1" / "Sum2" * 100 > 0 ) THEN 'Yes' ELSE 'No' END
from dual
ThanksWhat about just repeating the column values:
select (12+3) as "Sum1", (12-3) as "Sum2", CASE WHEN ( (12+3) / (12-3) * 100 > 0 ) THEN 'Yes' ELSE 'No' END FROM DUAL

Best practice for multiple instances of the same BEX query

Hi there,
I'm wondering what's the best way to use multiple instances of the same BEX query. Let me explain what I mean:
I have a dashboard with different queries feeding different period of time such as: week to date, month to date and so on. One query for each since it is based on a user exit.
For each query I want to show different data in different sections of my dashboard. Per example: sales per directors or sales per customer group, sales per day, sales per week and the like.I tried to connect a simple bar chart via a direct connection but with no success due to the multiple lines generated by the addition of the sales director, customer group, week number and so on.
My question is about the way to connect the different queries efficiently in order to show the different data while avoiding multiple useless lines.
The image above shows the query browser where, per example, for a Month to date query there will be mutiple line for each week as well as one line for each director. If, for two different components, I want to show data per week and data per director or other representation what is the best practice:
Add another instance of the same query and only put the week information and another one will only the director info?
Should I bind those to the excel file and use formulas to make final calculations?
Will there be a performance issues for adding different instances of the same query
I have 6 different queries (read 6 user exit that filters time via user exit).
Depending on the best practices there might be 4 instances for each for a total of 24 instances in the query browser.
I hope my question is clear enough, if not please do not hesitate I'll clarify as much as possible.
Regards,
Steve

Hi Steve,
Might be trying for solution for a long time, If i understood your question clear let me clarify you few points.
You are trying to access the bex query which is designed with the exit's in the background based on the logic and trying to call the entire dimensions and key-figures in a single connection. Then you are trying to map those data in the charts.
Steve, try to make more connections based upon the logic and split them. use the same query but split them by sales per customer group, sales per day, sales per week by making three different connections and try. You can merge the prompts from all connections.
Hope this Helps!!!
Sorry if i misunderstood your question.
--SumanT

To calculate the Askrate at query level

Hi alL,
Requirements is to calculate the ASKRATE(In query level) based on :
Mou Target(Month wise) - Total(daywise:CasthouseMkt targetMOU Target/remaining days of the month.
Please anybody tell me how to resolve this?
Thanks,
Suresh.

Hi,
I'm using the Elvis platform to create a sine signal using an Elvis platform and i want to send this signal to the sensors that i have previously mentioned. The sensors independent of any board has a receiving and transmitting sensor each. I want to send the signal to through the transmitting sensor and receive it through the receiving sensor. I wanted to test the sensors to see if it could working first, before using it to detect obstacles and calculating the distance of the obstacle from the sensors. I tried using just the sensors by itself, but it didn't work, so i'm inquiring if you know more about ultrasonic sensors to know if it would working if i added a simple non-inverting amplifier to it.
The components i am planning on using is the Elvis platform which i am currently using to create the sine signal using the Arbitrary Waveform Generator, and send the signal to the transmitting sensor, receive it with the receiving sensor and view the waveform on LabVIEW. Then i want to use the sensors to detect obstacles and use labview to calculate the distance of the obstacle from the sensor.
I do not have the HC-SR04 board at hand, but i do have the GH 311. I want to know if it would do with what i have in mine, which i have just stated previously.
I appreciate your fast response and help with my questions. Look forward to your reply.
Thank you.

What is the table for query name

Hi All,
I need an urgent requirement for removing duplicate technical query names from the production. Since there are few issues with the SAP given program I am customizing the SAP Program. Can any one tell me what is the table where the QUERY NAME and it's technical name can be found?
Thanks,
Alex.

hi Alex,
try RSRREPDIR, RSZCOMPDIR.
there is one oss note all the tables.
Table containing Work Book and query relation
Query Detailes
oss 792779
Symptom
Report ANALYZE_RSZ_TABLES is designed as a check-tool for detecting and solving different types of inconsistencies in the main query definition database tables.
The program is recommended for BW system administrators.
Other terms
Query definition, query, reusable, component, variable, missing elements, missing records, missing UID, INCONSISTENCY, RSZELTDIR, RSZCOMPDIR, RSZCOMPIC, RSZGLOBV, RSZCALC, RSZSELECT, RSRREPDIR.
Reason and Prerequisites
ATTENTION: the described version of the program is delivered with the following Support Packages:
SP27 for release BW 3.0B
SP21 for release BW 3.1C
SP13 for release BW 3.5
All versions of this report available in systems before those Support Packages are test versions which can be used only for information purposes.
Check prerequisites
Checks are possible only for elements in object version 'A' (active) and 'D' (delivered).
Checks for query elements in 'D' version are possible only in the systems which are set as content.
Checks description
Report performs checks in the tables containing the parts of the definitions of queries and query components: RSRREPDIR, RSZCOMPDIR, RSZCOMPIC, RSZGLOBV, RSZELTDIR and RSZELTXREF.
1. Table RSRREPDIR
The table RSRREPDIR is a header table of the generated reports. Consistency of query definition in this table allows to select a query in the Open Dialogs of fronted application and to call report generated for this particular query using transaction RSRT.
The following errors can be found:
- queries with missing definition;
- queries with missing GENUNIID;
- queries with technical names different than in RSZCOMPDIR;
- non-queries in the table.
1.1 Queries with missing definition
The queries are available only in the table RSRREPDIR and not found in the table RSZELTDIR in the corresponding object version. Such queries (in active version) can be accessed only from RSRT transaction. An attempt to execute such query will return the short dump 'Exception condition INCONSISTENCY'. The error also happens during query generation in RSRT or during mass regeneration of the queries using RSR_GEN_DIRECT_ALL_QUERIES report or application menu of transaction RSRT. The inconsistent queries can not be repaired because of missing query definitions. The recommended solution is to delete those records in order to avoid the possible system dumps.
1.2 Queries with missing GENUNIID
Queries having empty GENUNIID field in the table RSRREPDIR. Such queries may be available in the frontend and in RSRT transaction. An attempt to execute such query will return the message'GENUNIID not found'. Situation requires additional investigation at SAP. Create an OSS message for BW-BEX-ET-QDEF.
1.3 Queries with technical names different than in RSZCOMPDIR
The check outputs the queries which have different technical names in the RSRREPDIR and RSZCOMPDIR tables. Execution of a query using the technical name given in Query Designer and stored in the table RSZCOMPDIR will return the error message 'GENUNIID not found'. The system tries to find the corresponding GENUNIID for the wrong COMPID which does not exist in the system or which belong to another query. The recommended solution is to correct the wrong COMPID in the table RSRREPDIR via corresponding procedure.
1.4 Non-queries in the table
The table RSRREPDIR normally contains only reports. Query elements of other types should not exist in this table and can be deleted. In case, when such records exist in the table an attempt to access them in RSRT returns the error message 'GENUNIID not found'. The recommended solution is to delete those records from the table using the corresponding procedure.
2. Table RSZCOMPIC
The table RSZCOMPIC contains an InfoProvider assignment for queries and other reusable query components (STR, RKF and CKF).
The following errors can be found:
- local elements in RSZCOMPIC;
- components with inconsistent definition;
- components based on non-existing InfoProviders;
- components based on non-active InfoProviders.
2.1 Local elements in RZSCOMPIC
The table RSZCOMPIC contains an InfoProvider assignment for the reusable components. The local elements and also variables have no InfoProvider assignment and should not exist in this table. Those elements can be deleted via corresponding procedure.
2.2 Components with inconsistent definition
The reusable queries or query components existing in the table RSZCOMPIC, but not found in the table RSZELTDIR. Those reusable components may return 'Exception condition INCONSISTENCY' dump during accessing/execution. The situation may have different outcomes and has to be investigated at SAP. Create an OSS message for BW-BEX-ET-QDEF.
2.3 Components based on non-existing InfoProviders
Queries or query components are assigned to the InfoProviders which do not exist anymore in the system. Queries without InfoProvider are not available in Open Dialogs of frontend applications, but can be executed in RSRT. The execution will return the error message'InfoProvider not found'. The recommended solution is to delete the unnecessary components. Deletion of these queries or query components can be done directly from the list using corresponding procedure similar to RSZDELETE transaction.
2.4 Components based on non-active InfoProviders
Queries or query components which are assigned to the InfoProviders which do not exist in the system in the active version. Queries without active InfoProvider are not available in Open Dialogs of frontend applications. In case, an affected query is technically consistent, an attempt to execute it in transaction RSRT will return the message 'Activate the XXX InfoCube / InfoProvider again. Message #BRAIN 056'. Quite often this error is combined with other errors like missing GENUNIID in the RSRREPDIR or other inconsistencies. Each case has to be investigated in order to get the current status of this object. If the affected query is useless, it can be deleted from the system using transaction RSZDELETE.
The check is available only for the query elements in object version 'A' (active).
3. Table RSZCOMPDIR
The table RSZCOMPDIR is the directory table containing the main properties of all reusable components.
The following errors can be found:
- duplicated technical names (COMPID);
- components with inconsistent definition;
- components without InfoProvider assignment;
- components with missing OWNER.
3.1 Duplicated technical names (COMPID)
The check outputs queries or other reusable query components which have duplicated technical names (COMPID).
The error does not cause any dumps in ABAP or terminations in Query Designer, but may cause several symptoms in different reporting areas:
different queries are available in BEX Analyzer and RSRT under the same name;
wrong query is used as Data Source for Web Template (Web Reporting, Reporting Agent, Broadcasting, MDX);
replacement of variables does not work... etc.
The recommended solution is to provide a new technical name for the duplicated component using corresponding procedure.
ATTENTION: in case when there are only 2 components with the duplicated technical name, only one of those 2 components can be renamed using the corresponding procedure.
The alternative solution for renaming the duplicated technical names is to use the ABAP report RENAME_DUPLICATE_ELEMENTS.
3.2 Components with inconsistent definition
Reusable query components which are not found in the element directory table RSZELTDIR are displayed. This situation may cause the short dump 'Exception condition INCONSISTENCY' during accessing the affected component in Query Designer or execution the affected query in RSRT. Further investigations are required at SAP. Create an OSS note for the SAP component BW-BEX-ET-QDEF.
3.3 Components without InfoProvider assignment
All reusable query component (except variables) should be assigned to a particular InfoProvider. This assignment is located in the table RSZCOMPIC. When the record is not found in this table, the affected component may become not available in Query Designer in the corresponding InfoProvider. In some cases the error message "Component XXX.. (version A) has no InfoCube assignment". Further investigations are required at SAP. Create an OSS note for the SAP component BW-BEX-ET-QDEF.
3.4 Components with empty ONWER field
Reusable components which have empty OWNER field in the table RSZCOMPDIR are accessible by users having $USER setting in the authorization object S_RS_COMP1 (users which are authorized to their own queries or query components). This leads to authorization concept violation.
For error solution the field OWNER in the RSZCOMPDIR should be filled with any value. Execute the corresponding edit mode in order to fill the empty field with user 'SAP'. This will prevent the potential authorization violation for users with $USER setting and will take no effect on the users without this setting.
4. Table RSZELTXREF
The table RSZELTXREF contains all links and dependencies between the query elements within a query or query component.
The following errors can be found:
- missing elements (INCONSISTENCY dump);
- not supported relations between query elements;
- extended RSZELTXREF check.
4.1 Missing elements
Missing elements are those query elements which exist as the dependant objects (field TELTUID) in the table RSZELTXREF, but not available in the element directory table RSZELTDIR in corresponding object version. In case, when such elements are used in any query or other query components (STR, CKF or RKF), this may lead to ABAP short dump with 'Exception condition INCONSISTENCY' error message in query run-time or design-time. Other known symptoms of this error is, that structures, calculated key figures or restricted key figures are not available in an Info Provider in Query Designer during design-time.
The missing elements which are in use in other queries or query components, can not be automatically repaired or deleted without components where those elements are used. In most cases the manual repair operations directly in the DB tables are required. Create an OSS message for SAP component BW-BEX-ET-QDEF for further investigations and creation of a repair plan.
The missing elements which are not in use in any query or query components, can be deleted from the system via corresponding delete procedure. This deletion will not affect any existing query or query component.
ATTENTION: if missing element is variable, it can be repaired in some cases automatically using the corresponding repair procedure. See table RSZGLOBV check 5.1. 'Variables with inconsistent definition' for details.
4.2 Not supported relations between query elements
Some relations between query elements which are not supported and can cause dumps in ABAP or terminations in Query Designer (for example link STR <--> VAR). Such cases have to be additionally investigated at SAP. Create an OSS message for SAP component BW-BEX-ET-QDEF.
4.3 Extended RSZELTXREF check
The extended RSZELTXREF check outputs 2 situations which, in combination with other conditions in the system, may be responsible for slow performance of all operations which involve select from the table RSZELTXREF and resolving the relations between query elements (query load, query generation, expanding of a variable list for corresponding InfoObject, expanding of a list of reusable components in Query Designer,... etc.):
- records with empty INFOCUBE field
- records which are not used in any query or query component
Records with empty INFOCUBE field
The current algorithm of resolving of relations between the query elements uses an optimization which allows to reduce the amount of data selected from the table RSZELTXREF during such operations are query load, query generate, expand a list of reusable components (STR, CKF, RKF) and so on. All relations between query elements within one reusable component based on one InfoProvider 'N' are also located within the same InfoProvider. The system has to select only records where the INFOCUBE field contain the same InfoProvider 'N' and in addition to this all other records where the INFOCUBE field is empty. This is necessary, because in all BW releases below 3.x the INFOCUBE field was not in the RSZELTXREF table and all components created before 3.x release have this field empty. Selection of records with empty INFOCUBE is required in order to ensure the consistency of processed query.
When the number of records with empty INFOCUBE is quite large (50.000 - 1 mln records), any simple operation which require resolving of the relations may take a long time, because those records are always being selected, loaded to Query Designer and processed in the design-time.
Records which are not used in any query or query component
The program makes a virtual attempt to reconstruct the table RSZELTXREF via resolving the relations between all reusable components existing in the system. All records which are not used in any query or query components are considered as non-used records. Usually these are fragments of old queries or other components which are not deleted due to former errors in the query delete algorithm.
The current version of the program contain only information about those 2 issues. See the OSS note 823804 for additional information.
ATTENTION: the extended RSZELTXREF check is recommended when all critical problems with reusable components are resolved and the system clean-up is done (no useless records in the tables, no useless non-executable queries or other affected query component available).
Starting from SP28 for BW 30B, SP22 for BW 31C and SP14 for BW 3.5 the Extended RSZELTXREF check detects and fixes the following situations:
records used in existing queries or query components with empty INFOCUBE field;
records used in existing queries or query components with wrong INFOCUBE assignment;
records with or without INFOCUBE assignment which are not used in any query or query component.
For further check details read the OSS note 859086.
5. Table RSZGLOBV
The table RSZGLOBV contains the definitions and technical properties of the variables.
The following errors can be found:
- variables with inconsistent definition;
- variables with missing or incorrect properties;
5.1 Variables with inconsistent definition. Variable not found in RSZELTDIR/RSZCOMPDIR tables.
The variable existing in the table RSZGLOBV, but not existing in the tables RSZELTDIR or RSZCOMPDIR have inconsistent definition. These situation may return 2 different error messages. When a variable is missing in RSZELTDIR table (or in both together), an attempt to expand a list of variable under a corresponding InfoProvider or a list of text/formula variables will return a message 'Inconsistency in loading...'. All variables which are created for corresponding InfoProvider, text/formula variable are not available. When a variable is missing in the RSZCOMPDIR table only the error message is 'Missing UID XXXXXX... in RSZCOMPDIR! You may continue to work, but this component is not loaded' in Query Designer.
In both cases the variables can be repaired via the corresponding procedure provided in the program under the technical name (COMPID) corresponding to the name in VNAM field in the table RSZGLOBV with the text 'REPAIRED BY SAP'.
As an alternative solution, when the affected variables which are not used in any query or query component can be deleted directly from the RSZGLOBV table. Both solutions will fix the reported symptoms.
ATTENTION: it is recommended to open a repaired variable in Variable Wizard of Query Designer and to adjust the definition of this variable, when it is necessary.
ATTENTION: deletion of the affected variables missing in the table RSZCOMPDIR is not possible using transaction RSZDELETE. An attempt to delete such variable will return the error message 'Component not found'.
5.2 Variables with missing or incorrect properties
Several errors can be found within this check. The variables of different type have their own sets of properties. Missing or incorrect properties may cause different error message during execution of a query where such variables are in use. In the case of the affect variables with processing type 'replacement' , the replacement may not work because of the problem.
Each case has to be investigated at SAP. Create an OSS message for SAP component BW-BEX-ET-QDEF.
6. Table RSZELTDIR
The table RSZELTDIR is the main directory table containing all query elements available in the system.
ATTENTION: the RSZELTDIR check may take a long running time depending upon the table size.
The following errors can be found:
- local elements not in use;
- reusable elements not in RSZCOMPDIR table;
- reusable elements not in RSZCOMPIC table;
- structure (STR) without structure members;
- selections or RKF without definition in RSZSELECT table;
- formulas or CKF without definition in RSZCALC table;
- variables (VAR) without definition in RSZGLOBV table;
- queries (REP) without entries in RSRREPDIR table.
6.1 Local elements not in use
Local elements (field REUSABLE = false) which are not used as dependant objects in the table RSZELTXREF. These elements are useless and not accessible from Query Designer. Usually these are fragments of the definitions of old queries accumulated in system because of different problems with save/delete procedures which are not accessible by the end users. The recommended solution is to delete those elements using the corresponding delete procedure.
6.2 Reusable elements not in RSZCOMPDIR table
Reusable elements (field REUSABLE = true) must have a corresponding entry in the table RSZCOMPDIR which contains the definition and properties of this reusable component. An attempt to load such component in Query Designer may cause the error message 'Missing UID XXXXXX... in RSZCOMPDIR! You may continue to work, but this component is not loaded'. Additional investigations are requires at SAP. Create an OSS message for BW-BEX-ET-QDEF.
ATTENTION: Deletion of such affected components is also not possible using transaction RSZDELETE. An attempt to delete will return the message 'Component not found'.
6.3 Reusable elements not in RSZCOMPIC table
Reusable elements (field REUSABLE = true), except variables (DEFTP = 'VAR'), must have a corresponding entry in the table RSZCOMPIC which contains an InfoProvider assignment for reusable components. When a reusable component has no InfoProvider assignment it may be not available in Query Designer during design-time. Additional investigations are required at SAP. Create an OSS message for BW-BEX-ET-QDEF. In case the affected component is useless, it can be also deleted from the system using transaction RSZDELETE.
6.4 Structures (STR) without structure members
Reusable and non-reusable structures (DEFTP = 'STR') should have dependant elements (structure members). When these structure members are not found a query containing this structure returns the error message 'Element structure not correct' during generation or execution in RSRT or BEx analyzer. The program outputs a query technical name where such structures are used or the technical name of an InfoProvider if the affected structure is reusable and not used in any query. In this case it can be accessed from any query created in the same InfoProvider in Query Designer. The solution is to open the affected structure in using the latest available version of Query Designer and to create the required structure members in order to avoid the error message.
In case, when the affecter structure is local (non-reusable) and is not used in any query, this structure is not accessible by frontend users and can be deleted from the system by corresponding procedure provided in the program.
6.5 Local selection of RKFs without records in RSZSELECT table
Local selections and reusable Restricted Key Figure (DEFTP = 'SEL') usually should have the corresponding records in the DB table RSZSELECT. The program outputs all selections found in the system which have no corresponding records in the RSZSELECT table.
Usually this issue has no impact on the existing queries and produces no error messages. There are 3 possible types of selections within a query:
Normal selection - this selection represents a characteristic in Row, Columns or Free Characteristics area, Conditions or Exceptions. This situation produces no error messages, but the selection is not taken into account by OLAP.
Dummy structure member - structure member type selection can be defined using Query Designer. Such structure member produces no selection and can be used only as place holder within a query. This situation produces no error messages during generation/execution of a query containing a structure with those dummy structure members.
Cell selection - this type of selection is usually used as Cell selection and can be defined using Cell Editor in Query Designer. This situation produces no error messages, but the selection is not taken into account by OLAP.
If it is necessary, the selection definition can adjusted using the latest available version of Query Designer. The affected local selections can be accessed from the queries presented in the WHERE-USED (INFOCUBE/QUERY). The Restricted Key Figures are available in Query Designer from any query created on the corresponding InfoProvider.
In case, when a local selection is not used in any query or query components the recommended solution is to delete this selection using the corresponding delete procedure.
6.6 Local formulas of CKFs without records in RSZCALC table
Local formulas (DEFTP = 'FML') or Calculated Key Figures (DEFTP = 'CKF') should contain definition of the calculations in the table RSZCALC. When such definition is not found in the table RSZCALC the queries or query components which include those affected objects can not be generated or executed by OLAP. An attempt to generate such query returns the error message 'The (sub) formula XXX... is not available'.
The definitions of the affected formulas or Calculated Key Figures can be adjusted using the latest available version of Query Designer. The adjustment of a local formula is possible from the corresponding query listed presented in the program. The Calculated Key Figures are available in Query Designer from any query created on the corresponding InfoProvider.
In case, when a local formula is not used in any query or query components the recommended solution is to delete this formula using the corresponding delete procedure.
6.7 Variables without records in RSZGLOBV table
Variables (DEFTP = 'VAR') should exist in the table RSZGLOBV. The table RSZGLOBV contains all processing properties and definition of the variables. Query where such variables are used can not be executed without problems.
The repair procedure is not possible, because of missing definition. In case, when such variable is not used in any query, the recommended solution is to delete it from the system in order to avoid potential problems. If the affected variable is already used in other queries or query components, create an OSS message for SAP component BW-BEX-ET-QDEF. Further investigations and possible repair plan have to be created at SAP.
6.8 Queries without records in RSRREPDIR table
Queries (DEFTP = 'REP') should exist in the table RSRREPDIR. The table RSRREPDIR is a header table of generated reports and also a part of the database view V_REP_JOIN which provides data for the BEx Open/Save Dialogs.
A query which does not exist in the table RSRREPDIR is not accessible via RSRT transaction (error message 'GENUNIID not found') and not displayed in the Open/Save Dialogs of fronted applications.
The recommended solution is to delete such queries using the corresponding procedure provided in the program and similar to RSZDELETE.
In some cases the repair procedure is also possible. The success of the repair procedure depends upon the consistency of the affected query, the existence of a valid InfoProvider for this query and some other factors. For repair attempt create an OSS message for the SAP component BW-BEX-ET-QDEF.
hope this helps.

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

Problem with binding value on the UI from a calculated column in the view

I have calculated field "Readiness" in my db view, which gets calculated based on other columns in the same table. I have added new column to my EO using "Add from table" option and added the same column from to VO using "Add from EO" option. In my application, I will update a particular date field in the UI and this calculated column "Readiness" in the db will be set to yes or no and this logic is working fine, both date date field and calculated field are in same view object. I have added a attribute binding to this "Readiness" column in my view page. The problem is the calculated column value does not reflect the new value in the db, it shows the old value. I have tried different refresh option for the iterator and ppr option for the field binding. Even after reloading the page, the value shown on the UI page is different from the value in db, other bindings on the UI page works fine, not sure any special settings are required for the Calculated columns. any ideas are appreciated.
Thanks for your help,
Surya

I tried to add soms debugging statements in the EO and getters method, the calcaulated column is not picking the value in db view. I'm not any special iterator/field settings are required at BC level. I'm a newbie, any help is appreciated.
Thanks,
Surya

Is there any way to prevent the OS from querying the Superdrive when start

Just a random question. Whenever my MacBook Pro starts up (either from sleep or a complete/fresh start, the OS queries the drive slot to see if there is a disc present. While this may be normal behavior, it seems to slow down the start up process. (I rarely ever have a disc in the drive). Just curious if this, in fact, normal, or if there's something awry.

Is there any way to prevent the OS from querying the Superdrive when start
No
he OS queries the drive slot to see if there is a disc present.
How can you tell? Based on the noise it makes?

How to create the layout for query in Bex 3.5

Hi All,
i have one requirement to do layout for query. Report like after passing the variable values and then they will select the required layout. It has to get output according layout selection fields.
i have no idea about how to create layout.
thanks in advance...
Thanks & Regards,
Mallikarjuna.k

Hi Gregor,
In the note 1149346 that you have mentioned, it says -
You must start the input-ready query in change mode.
BEx Analyzer: In the properties of the analysis grid, the switch
"Suppress new rows" must not be set. Furthermore,
the switch "Allow entry of plant values"
must be set in the local query properties.
I have not seen this setting Allow entry of plant values in a query - can you tell what is refers to?

How to find the name of query for a given report

Hi All,
I am having the name of a report and i need to find out the name of query for that report . Plz tell me how to find out the name of the query for a given report.
Thanks.
Regards,
Pooja Joshi.

Use this FM
RSAQ_DECODE_REPORT_NAME
This FM takes program name as I/P and gives Query Name as O/P.
This FM uses the structure AQADEF to fetch the data.
Hope this helps.
Regards
Vinayak

No data in WEBI report - but plenty of data in the underlying Bex query...

HI all - I have a problem with my webi queries - which are sometimes breaking...
We run in the XI 3.1 ans SAP int, kit - SP 2 on both.
Sometimes af perfectly well functioning webi report suddenly returns no values - stating that the query didn't find anything. However - if I run the bex query with the same selections I get plenty of data. So there is data. Therefore it might be a Int. kit problem - however, when I bulid a new webi report - similar to the first one, with same dimensions etc. but without all the formatting - It runs fine too!!!!
So it seems like somehow the original webireport has lost the connection to the measueres which it holds - has anyone any idea to what the cause might be and how to fix it?
By the way - I havre refreshed the Universe and there is nothing to update.
BR
Jess

Hi Ingo - the MDX statement from the MDX trace - does not yield any data - However, if I make a similar selection in the BEX, there i data avaiable - so it might be a problem with the how the MDX statement is generated.
I've trouble shooted further and my learnings are so far:
The problem is caused by a combination of 5 dimensions
If you remove either one of the 5 dimensions - the query returnsdata
If you add a specific meausure (a restricted bex key figure) - data is also returned - also in the other measures.
The MDX statement looks like this:
SELECT { [Measures].[D6ZWIC1Q7MOA2YCJM1LAPRQNG], [Measures].[D6ZWIC1Q7MPTG70294GIUMJ70], [Measures].[D6ZWIC1Q7NGQDWFMH0MZ7LEP8], [Measures].[D6ZWIC1Q7NI9R53543I7CG78S], [Measures].[D6ZWIC1Q7NWVQXAK7CQUMKQEK], [Measures].[D6ZWIC1Q7NYF45Y2UFM2RFIY4] } ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [0CALMONTH2].[LEVEL01].MEMBERS, [0REPTT].[LEVEL01].MEMBERS ), [0EMPLSGROUP].[LEVEL01].MEMBERS ), [0PAYSCALEAR].[LEVEL01].MEMBERS ), [0ORGUNIT].[LEVEL01].MEMBERS ), [ZBOORGUNT ORGEH 01].[LEVEL00].MEMBERS ) ON ROWS FROM [ZMPHPTGL1/ZDQHPTMN1] SAP VARIABLES [0P_CALMO] INCLUDING [0CALMONTH2].[12] [0P_CALYE] INCLUDING [0CALYEAR].[2009]
Where all the measures in fact are restricted keyfigures from the Bex query. The dimensions are business content characteristics, as are the variables used.
The above MDX statement returns nothing - but if you remover either one of the dimensions in the cross joins - the expected data is returned.
Any ideas to why that happens?
BR
Jess

Webi report data & the corresponding BW Query data do not tally.

Hi all,
         I am running a Webi report (XI 3.1) over a universe that is built on an SAP BW Query. The data in the report is regarding sales, and the grand total of the 'Sales Amount' as per the BW Query is about 1Million, which is correct. However, when I run a Webi report based on the same BW query, taking ALL the objects from the query (without any conditions and filters), the 'Sales Amount' figure comes out to be only 50K instead of 1Mn(as above). I'm not sure why this figure is so drastically reduced in the Webi report.
        When I remove some objects from the query, Webi displays the correct figure of 1Mn. But these are the objects that are very much required in the report for multidimensional analysis. Dropping these objects would defeat the purpose of the report. The BW query too includes these objects during its execution and then displays the correct sales figure of 1Mn.
       Any help will be greatly appreciated.
Regards,
Alok.

Hi,
     Yes, I was getting partial results. I got rid of it by unchecking the the options in the 'SQL' tab in the Universe parameters.
     Thanks for the help.
Regards,
Alok.

How to use the not exists query

Hello,
Using obiee 11g,
i would like to know how to deal with not exists query in the obiee11g,
the query is like this
select count(a.col1),a.col2 from table1 a ,table2 b where a.col1=b.col1
and not exists
(select d.col1 from table3 d, table4 e
where d.col1=e.col1 and d.col1=a.col1)
group by a.col2
there are 4 tables.
table1,table2,table3,tabel4
this is what i need in a report,these tables are used in othere places also,
would prefer if its possible to do in for a report i.e.e analysis itself.
If not possible then may be in rpd since if i change in rpd it may reflect every place
and not in for a report itself.
thanks

Implement this in report itself can be a tricky and tedious job..But better to have it in RPD - Physical - Select Table type
USE NOT IN in place of NOT Exist..You can simply use SELECT statement in SELECT TABLE TYPE
Hope it clear

How do I create a 1d array that takes a single calculation and insert the result into the first row and then the next calculation the next time the loop passes that point and puts the results in thsecond row and so on until the loop is exited.

The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
pear to be working or at least I am not getting any indication on the inidcator.
Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
Attachments:
regulation_tester_7_loops.vi ‏244 KB

I didn't really have time to dig in and understand your program in depth,
but I have a few tips for you that might things a bit easier:
- You use local variables excessively which really complicates things. Try
not to use them and it will make your life easier.
- If you flowchart the design (very similar to a dataflow diagram, keep in
mind!) you want to gather data, calculate a value from that data, store the
calculation in an array, and loop while the time is in a certain range. So
theres really not much need for a sequence as long as you get rid of the
local variables (sequences also complicate things)
- You loop again if timepassed+1 is still less than some constant. Rather
than messing with locals it seems so much easier to use a shiftregister (if
absolutely necessary) or in this case base it upon the number of iterations
of the loop. In this case it looks like "time passed" is the same thing as
the number of loop iterations, but I didn't check closely. There's an i
terminal in your whileloop to read for the number of iterations.
- After having simplified your design by eliminating unnecessary sequence
and local variables, you should be able to draw out the labview diagram.
Don't try to use the "insert into array" vis since theres no need. Each
iteration of your loop calculates a number which goes into the next position
of the array right? Pass your result outside the loop, and enable indexing
on the terminal so Labview automatically generates the array for you. If
your calculation is a function of previous data, then use a shift register
to keep previous values around.
I wish you luck. Post again if you have any questions. Without a more
detailed understanding of your task at hand it's kind of hard to post actual
code suggestions for you.
-joey
"nelsons" wrote in message
news:[email protected]...
> how do I create a 1d array that takes a single calculation and insert
> the result into the first row and then the next calculation the next
> time the loop passes that point and puts the results in thsecond row
> and so on until the loop is exited.
>
> The attached file is work inprogress, with some dummy data sp that I
> can test it out without having to connect to equipment.
> The second tab is the one that I am having the problem with. the
> output array from the replace element appears to be starting at the
> index position of 1 rather than 0 but that is ok it is still show that
> the new data is placed in incrementing element locations. However the
> main array that I am trying to build that is suppose to take each new
> calculation and place it in the next index(row) does not appear to be
> working or at least I am not getting any indication on the inidcator.
>
> Basically what I am attempting to do is is gather some pulses from
> adevice for a minute, place the results for a calculation, so that it
> displays then do the same again the next minute, but put these result
> in the next row and so on until the specifiied time has expired and
> the loop exits. I need to have all results displayed and keep building
> the array(display until, the end of the test)Eventually I will have to
> include a min max section that displays the min and max values
> calculated, but that should be easy with the min max function.Actually
> I thought this should have been easy but, I gues I can not see the
> forest through the trees. Can any one help to slear this up for me.

What is the difference between query & query view in BI 7.0 ?

Hi Experts,
What is the difference between query & query view in BI 7.0 ?
Can anyone suggest me on this.
Thanks & Regards
Sameer Khan

Hi Sameer,
Pls find the below URL for Query&Query View
http://help.sap.com/saphelp_nw04/helpdata/EN/26/6de53cce129749893b008c627ede07/content.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/36/18788b6bca5d02e10000009b38f983/content.htm
Thanks,
John

The problem of query in oracle xml db

hello everybody!
I create a table of xmltype,and insert data in it. But I query data ,the problem comes up.
the xml instance is :
<?xml version="1.0" encoding="UTF-8"?>

<CityModel xmlns="http://www.opengis.net/examples" xmlns:gml="http://www.opengis.net/gml" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2000/10/XMLSchema-instance" xsi:schemaLocation="http://www.opengis.net/examples city.xsd">
     <gml:name>Cambridge</gml:name>
     <gml:boundedBy>
          <gml:Box srsName="http://www.opengis.net/gml/srs/epsg.xml#4326">
               <gml:coord>
                    <gml:X>0.0</gml:X>
                    <gml:Y>0.0</gml:Y>
               </gml:coord>
               <gml:coord>
                    <gml:X>100.0</gml:X>
                    <gml:Y>100.0</gml:Y>
               </gml:coord>
          </gml:Box>
     </gml:boundedBy>
     <cityMember>
          <River>
               <gml:description>The river that runs through Cambridge.</gml:description>
               <gml:name>Cam</gml:name>
               <gml:centerLineOf>
                    <gml:LineString srsName="http://www.opengis.net/gml/srs/epsg.xml#4326">
                         <gml:coord>
                              <gml:X>0</gml:X>
                              <gml:Y>50</gml:Y>
                         </gml:coord>
                         <gml:coord>
                              <gml:X>70</gml:X>
                              <gml:Y>60</gml:Y>
                         </gml:coord>
                         <gml:coord>
                              <gml:X>100</gml:X>
                              <gml:Y>50</gml:Y>
                         </gml:coord>
                    </gml:LineString>
               </gml:centerLineOf>
          </River>
     </cityMember>
     <cityMember>
          <Road>
               <gml:name>M11</gml:name>
               <linearGeometry>
                    <gml:LineString srsName="http://www.opengis.net/gml/srs/epsg.xml#4326">
                         <gml:coord>
                              <gml:X>0</gml:X>
                              <gml:Y>5.0</gml:Y>
                         </gml:coord>
                         <gml:coord>
                              <gml:X>20.6</gml:X>
                              <gml:Y>10.7</gml:Y>
                         </gml:coord>
                         <gml:coord>
                              <gml:X>80.5</gml:X>
                              <gml:Y>60.9</gml:Y>
                         </gml:coord>
                    </gml:LineString>
               </linearGeometry>
               <classification>motorway</classification>
               <number>11</number>
          </Road>
     </cityMember>
     <cityMember xlink:type="simple" xlink:title="Trinity Lane" xlink:href="http://www.foo.net/cgi-bin/wfs?FeatureID=C10239" gml:remoteSchema="city.xsd#xpointer(//complexType[@name='RoadType'])"/>
     
     <dateCreated>2000-11</dateCreated>
</CityModel>
I query it:
set long 50000
SELECT extract(value(X),
'/CityModel/gml:boundedBy/gml:Box/gml:coord')
FROM city X;
ERROR:
ORA-31011: XML 语法分析失败
ORA-19202: XML 处理
LPX-00601: Invalid token in: '/CityModel/gml:boundedBy/gml:Box/gml:coord' 时出错
未选定行
when query it again:
set long 50000
SELECT extract(value(X),
'/CityModel/boundedBy/Box/coord')
FROM city X; (it has no namespace)
EXTRACT(VALUE(X),'/CITYMODEL/BOUNDEDBY/BOX/COORD')
has no result.
thank you very much!

<?xml version="1.0" encoding="UTF-8"?>

<CityModel xmlns="http://www.opengis.net/examples" xmlns:gml="http://www.opengis.net/gml" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2000/10/XMLSchema-instance">
<gml:name>Cambridge</gml:name>
<gml:boundedBy>
<gml:Box srsName="http://www.opengis.net/gml/srs/epsg.xml#4326">
<gml:coord>
<gml:X>0.0</gml:X>
<gml:Y>0.0</gml:Y>
</gml:coord>
<gml:coord>
<gml:X>100.0</gml:X>
<gml:Y>100.0</gml:Y>
</gml:coord>
</gml:Box>
</gml:boundedBy>
<cityMember>
<River>
<gml:description>The river that runs through Cambridge.</gml:description>
<gml:name>Cam</gml:name>
<gml:centerLineOf>
<gml:LineString srsName="http://www.opengis.net/gml/srs/epsg.xml#4326">
<gml:coord>
<gml:X>0</gml:X>
<gml:Y>50</gml:Y>
</gml:coord>
<gml:coord>
<gml:X>70</gml:X>
<gml:Y>60</gml:Y>
</gml:coord>
<gml:coord>
<gml:X>100</gml:X>
<gml:Y>50</gml:Y>
</gml:coord>
</gml:LineString>
</gml:centerLineOf>
</River>
</cityMember>
<cityMember>
<Road>
<gml:name>M11</gml:name>
<linearGeometry>
<gml:LineString srsName="http://www.opengis.net/gml/srs/epsg.xml#4326">
<gml:coord>
<gml:X>0</gml:X>
<gml:Y>5.0</gml:Y>
</gml:coord>
<gml:coord>
<gml:X>20.6</gml:X>
<gml:Y>10.7</gml:Y>
</gml:coord>
<gml:coord>
<gml:X>80.5</gml:X>
<gml:Y>60.9</gml:Y>
</gml:coord>
</gml:LineString>
</linearGeometry>
<classification>motorway</classification>
<number>11</number>
</Road>
</cityMember>
<cityMember xlink:type="simple" xlink:title="Trinity Lane" xlink:href="http://www.foo.net/cgi-bin/wfs?FeatureID=C10239" gml:remoteSchema="city.xsd#xpointer(//complexType[@name='RoadType'])"/>

<dateCreated>2000-11</dateCreated>
</CityModel>
SQL>create table city of xmltype;
then insert the data into the table
and query:
set long 50000
SELECT extract(value(X),
'/CityModel/boundedBy/Box/coord')
FROM city X; (it has no namespace)
EXTRACT(VALUE(X),'/CITYMODEL/BOUNDEDBY/BOX/COORD')
and I query it again:
set long 50000
SELECT extract(value(X),
'/CityModel/gml:boundedBy/gml:Box/gml:coord')
FROM city X;
ERROR:
ORA-31011: XML 语法分析失败
ORA-19202: XML 处理
LPX-00601: Invalid token in: '/CityModel/gml:boundedBy/gml:Box/gml:coord' 时出错
未选定行
ma oracle is 10g
thank you very much!
Message was edited by:
user508129

Calculating the % in the query...

Similar Messages

Maybe you are looking for