Calendar strange issue

On my ios devices i can create an event using a calendar that my wife created. But on my mac i can not. Any idea why? Thanks

Thank you Shane.
I've run the sample and it works fine.
Perhaps it's not a bug but it's very strange the behaviour ens has with events with special characters. This is what I do step by step:
1. I subscribe for all events and all the users
2. I create and appointment with special characters
3. I receive the event notification
GAP/1.0 1b 3 1915 enp:///ics/caleventcreate?calid=[email protected]&uid=000000000000000000000000000000000b2c934cc04e0000140000001f130000&rid=0|ntfy|00000000
The number 1915 should be the message length so I try to read 1915 bytes. However I can only read 1903 bytes. In this 1903 I have the full xml with the vcalendar.
4. I create a second appointment
5. The message I received is something like "\0\0\0\0\0\0\0\0\0\0\0\0" which is 1915-1903
6. I have to discard this message because it's invalid
7. I receive the event notification
I can fix my custom client and discard this "\0\0\0..." messages but It's a strange behaviour. Perhaps the protocol is as is but I thought it was a bug.
Thank you Shane.

Similar Messages

  • Blackberry Calendar sync issues- Recurring Meeting not getting updated properly

    I'm an IT person, all of our employees have been moved to microsoft office 365 recently. After that all blackberry users(BB Q10) in my company are experiencing some strange issues with recurring meetings.
    All the recurring meetings created before 11 AM IST are not syncing correctly and going to the next day in calendar(time is same). However this is showing correctly on outlook, iPhone and windows phone calendars.
    We are using exchange active sync for email setup. The meetings are created using outlook.
    Its strange that the issue is only for recurring meeting created before 11 am IST, single meetings and recurring meetings created after 11 am is working fine.
    We have tried configuring the mail accounts on android windows and iPhone, but those are all working fine. Its only causing issues with Blackberry.
    Troubleshooting done so far:
    1. Checked the  time zone of BB and outlook, all configured to GMT+5.30
    2. Re-synched the calendar
    3. Recreated mail account
    4. Restarted phone.
    Can any one help with this?

    Hi,
    Pl ensure that you have made the following settings for running BBP_VENDOR_SYNC. http://help.sap.com/saphelp_srm40/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
    Else run BBPUPDVD to update the vendor data.
    Regards,
    Nikhil

  • Strange issue with a users meeting turning into a appointment.

    So we have a user that is administrative assistant to many executives.
    Today they created a meeting today and invited a few people. (for whatever reason, the user has themself as a shared calendar. Not sure if they created the meeting under their own shared calendar for themself or not)
    sometime later they decided to add another user to the meeting, but the meeting no longer had attendees and turned into an  ppointment instead.
    The previous attendees still have their meetings with all the correct info(minus the user they tried to add)
    Also when checking the OWA vs the CLIENT,  you can see the sent email/invite in Outlook 2011 (yes its a mac they're using) in the Sent folder.  However, it was not in the Sent folder in OWA, and instead it was in the trash.   The one in the
    trash in OWA however, instead of containing the original users as the attendees, contained the New user they were trying to add.(all based on the time the original invites were sent out)   The first invite was sent out @ 1:30pm while the new user invite
    was (a completely different meeting invite due to the original not being there as a meeting) was sent out at 2:30pm.
    Is there any way to sort of monitor or track this sort of transacation?  A few users in question always seem to have these sort of strange issues.

    Hi,
    According to your description, I understand that:
    1. There is a delegate set for several managers.
    2. The delegate created a meeting with some attendees for a manager and all attendees received it successful in Calendar.
    3. When the delegate sent a meeting updates, the attendees in organizer’s calendar were missing and there is no updates in attendees’ calendar.
    Is it right? If I misunderstand, please point it out.
    Please check whether there are any mobile devices used in receiving or accepting the meetings. Please confirm whether all attendees in organizer’s calendar are also missing in OWA. we can stop using any mobile devices and try creating new meeting then sending
    updates in OWA to try whether the issue persists.
    Additionally, please refer to the following articles for more information about Best practice when when using the Outlook Calendar:
    http://office.microsoft.com/en-us/outlook-help/best-practices-when-using-the-outlook-calendar-HA104004449.aspx
    http://support.microsoft.com/kb/899704/en-us
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Strange issue with WEBI schedule Report

    Hi All,
    I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
    Any idea???
    regards

    Hi Manoj,
    1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very    large data.
    2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
    Hope this will help,
    Anamika.

  • IPhone 5, iCloud calendar reminder issue

    When I use the iCloud calendar on my iPhone 5 and make an event with a reminder set to "on time of event", it will sometimes just beep and flash a notice on lock screen for a few seconds and then the notice disappear from lockscreen.
    Sometimes though, everything works as it should and the notice is still there on lockscreen till I unlock the screen (or the event is over).
    All settings in notice center and mail/calendar is correct.
    When I use google calendar it always works!
    The problem was there from iOS 6.0 and is still there after update to 6.1
    I have been in contact with apple support who couldn't find any help at the moment.
    More people seem to have this according to this site: http://forums.imore.com/ios-6/244349-ios-6-calendar-reminder-issues.html

    Update: The problem occurs when I have connected my iCloud acount with calendar enabled on my iMac.
    It's like the iPhone 5 thinks I have seen the notice on my iMac and therefore removes it from the phone.
    This happens even if my iMac is locked/lockscreen.

  • Iphone 4s calendar alert issue

    I tend to put 2 alerts on my calendar events, one for 1 day before and the second one for 1 hour before (or some other on the day of event).  I have noticed that when I put in the first alert for 1 day before and then enter the second alert for 1 hour before and click done they have somehow been reversed, the first alert is now 1 hour before and the second alert is 1 day before.  I have to click them again and change them to the proper order, this usually take about 3 tries to get them to stay as I want them.  I can them save the event and all is good.  I was at the Apple store and the staff duplicated this issue so I know I'm not the only one experiencing this nuissance.  Has anyone else come across this?  I do hope the upcoming update will fix it.

    Update since Genius visit:
    1) Apple is working on an update
    2) There is no awareness at Apple of this calendar alert issue as a bug, hence it is not being addressed/worked on
    3) Solutions offered by Genius have not resolved this issue.
    Solutions offered by Genius, in order of which to try first:
    1) Delete calendar data from iPhone: Settings>iCloud>Calendars OFF and then restore data from iCloud: Calendars ON
    2) Reset iPhone settings: Settings>General>Reset>Reset all settings
    3) Restore to factory settings: Settings>General>Reset>Erase all content and settings, then restore data from iCloud and in-app backups.
    4) Use another calendar app (seriously)
    Of course, if the bug is actually part of the iOS software (could it be?) then no amount of erasing and restoring data will fix the issue.  I completed the first two options with no change, and am not willing to do the third option because I am not interested in going through the process of backing up, then restoring all my third-party apps.
    My solution: raise awareness of this issue with Apple, so that it can be worked on and fixed.   I have reported it as a bug through Apple's feedback module: http://www.apple.com/feedback/iphone.html and I encourage-- no, ask-- you to do the same, if you are experiencing this issue.  I provided a link to this forum topic to show the variety and detail of problems.
    Are you sick of missing alerts, fiddling endlessly, coming up with workarounds, paying for unreliable software, and not being responded to?  I am.  It's time to rally!

  • Files transferred to external HD end up in trash - very strange issue

    Hi,
    I seem to be having a very strange issue, hopefully somebody can help or has seen this before.
    Hardware: MacBook Air, Western Digital Passport external HD, 250gb, formatted NTFS.
    Software: OSX 10.7 Lion, Paragon (allows me to write to an NTFS formatted HD)
    Issue Summary: I copy something to the external HD; I empty trash; the file I copied is deleted from the external HD. It doesn't happen every time.
    I do also seem to have a persistent folder in trash called "WD Sync Data" that won't go away unless I re-delete it as it's also in the root of the drive. Not sure if this is related somehow.
    Recently I copied 3 video files inside a folder to the HD, then disconnected the HD. When I reconnected it a while later and noticed that inside the "WD Sync Data" folder in trash were the 3 files I'd copied. I then looked inside the same folder on the root of the drive and the files were there, instead of inside the folder that I'd copied to the drive, which had vanished. If I hadn't noticed and had emptied the trash, those files would've been deleted.
    It's definitely happened more than once; last time I actually deleted the files from my computer after copying, then emptied trash, and they were gone from the external HD also.
    I've only found one person who seemed to be experiencing a similar problem back in 2010. It sounds similar though it could've been user error: http://www.mac-forums.com/forums/apple-notebooks/188224-weird-external-hard-driv e-trash-problem-help-please.html
    Has anyone experienced this or have any suggestions?

    Quick update: I ran a verify then a repair in Disk Utility as there were a couple of errors. Hopefully this has solved the issue, however it'd still be interesting to know if anyone's come across this before and what caused it?

  • Oracle Identity Manager 9.1.0.2 & WebLogic Strange Issue

    Hello,
    I am running OIM 9.1.0.2 (new installation) and WebLogic 10.3.3 in a clustered environment. I am having a strange issue where the resolution is eluding me.
    This install is running on Windows 2008 x64 Standard and using the x64 JRockit Java.
    What's happening is when I configure the managed server to run as a windows service, OIM isn't detected on the server. I can bring up xlWebApp but an unable to log into that or the Design Console. When launching the Diagnostic Dashboard it statest that OIM isn't installed.
    If I stop the service and log into WebLogic and start the managed server from within the Admin Console in WebLogic, everything works just fine.
    Any thoughts on how to troubleshoot this and ultimately resolve this? The service correct startes the managed server as I can watch it start up in the admin console but when it starts that way, OIM isn't detected. Very odd.
    Thanks,
    Andrew

    Oracle confirmed with us that it is certified for 10.3.3 though it may not be published yet.
    At any rate I figured out the problem today. The script I used to create the service was missing the JAVA_OPTIONS section from the xlStartManagedServer.cmd file. Once I added that and re-created the service, all is well.
    Thanks

  • Windows Vista and BPS0 - Strange issue

    I just got a new HP Pavilion laptop with Vista and I have a strange issue:
    All transactions work (SE80, RSA1, ...) except BPS0. The moment I enter TCode BPS0, I get completely logged out (all sessions). No error messages, no dumps. It just logs me out silently.
    Is this happening only to me?
    I use Windows Vista Home Premium edition and AMD Turion processor 64x2.
    Any suggestions appreciated.
    Thanks

    i too recently bought hp pavillion and my problem is i cant able to logon it gives me error of 10054, connection broken, can you tell me which things restrict me to log on. any settings are there to be performed. do mail me, i have been trying from 2 week my id is [email protected]

  • Strange issue with RAM upgrade: It works but it doesn't! Please help.

    Hello Everyone,
    I have a very strange issue with my iMac since upgrading my RAM from 4 to 12 gig. When I first installed the new RAM it booted up and ran great. The next time I went to boot the iMac up it swtiched on but didn't get as far as the first white boot up screen. I tried turning it off and on a few times using the power on/off button but still no success. I decided to remove the RAM and reseat it. The computer then booted up again fine. Here's the problem though: when I went to switch my iMac on the next day it wouldn't boot up. Again, I took the RAM out and put it back in and the iMac booted up fine. I've checked the status of the RAM in the system profiler and it reports that everything is OK. So, I'm at a loss. Obviously, I don't want to go through this process every time I want to start up my Mac. Any ideas/solutions would be very gratefully received.
    Many thanks in advance.

    I completely agree with you. It will be one of the 3 issues you outline. The machine was bought brand new and has never given me a problem. It is just the introduction of the new RAM that has started a problem. However, I did just risk a restart and it booted up fine. I don't know if a restart is any different to shutting down and then pressing the on/off button to start the computer. Maybe my last reseating has done the trick or maybe my thinking is flawed because restarting involves a different process to booting up by pressing the on/off button. I don't know.
    In the part of the world I'm sitting in it's night time now so I will leave the diagnostics running and check the results in the morning. I hope the issue is now resolved anyway. This sort of thing takes me back to my dark PC days although in this case I know it's probably not the Mac's fault.
    Thanks again. Very much appreciated.

  • Strange issue with rights of account, used by SSIS (Foreach Loop Container does not return file names without Admin rights on server)

    Hello everyone.
    Faced very strange issue with account, which is used to run SSIS package.
    The specific package uses Foreach Loop Container to retrieve file names within the specified folder, and put them into Import file task.
    The package is set up to run under specific service account. This service account is given all permissions (Full control) to the folder where source files reside.
    So the issue is: SSIS package fails to execute this task (Foreach Loop Container and then Import), and shows that no files are found in the directory (although files ARE there).
    Once we're adding the service account into local Administrators group on the SQL Server, it works! Removing - does not work again. We cannot leave the service account as SQL server's admin as it's prohibited by our IT policies, and is just a bad practice.
    Any ideas, please? 
    MCP

    Here's the real log output:
    Date 16.04.2014 12:47:09
    Log Job History (RU-BW: Update)
    Step ID 1
    Server Server
    Job Name RU-BW: Update
    Step Name bw_import_cust_master_data
    Duration 00:00:02
    Sql Severity 0
    Sql Message ID 0
    Operator Emailed
    Operator Net sent
    Operator Paged
    Retries Attempted 0
    Message
    Executed as user: service_account Microsoft (R) SQL Server Execute Package Utility  Version 10.50.4286.0 for 64-bit  Copyright (C) Microsoft Corporation 2010. All rights reserved.    Started:  12:47:09  Error: 2014-04-16 12:47:11.45
        Code: 0xC0202070     Source: bw_import_cust_master_data Connection manager "Input"     Description: The file name property is not valid. The file name is a device or contains invalid characters.  End Error  Error:
    2014-04-16 12:47:11.47     Code: 0xC0202070     Source: bw_import_cust_master_data Connection manager "Input"     Description: The file name property is not valid. The file name is a device or contains invalid characters.  End
    Error  Error: 2014-04-16 12:47:11.48     Code: 0xC0202070     Source: bw_import_cust_master_data Connection manager "Input"     Description: The file name property is not valid. The file name is a device or contains invalid
    characters.  End Error  Error: 2014-04-16 12:47:11.48     Code: 0xC020207E     Source: Import file Flat File Source [1]     Description: The file name is not valid. The file name is a device or contains invalid characters.
     End Error  Error: 2014-04-16 12:47:11.48     Code: 0xC004701A     Source: Import file SSIS.Pipeline     Description: component "Flat File Source" (1) failed the pre-execute phase and returned error code 0xC020207E.
     End Error  DTExec: The package execution returned DTSER_FAILURE (1).  Started:  12:47:09  Finished: 12:47:11  Elapsed:  2.324 seconds.  The package execution failed.  The step failed.
    MCP

  • Strange issue in custom Success/Failure captions

    Hi,
    I have a strange issue in my custom Success/Failure caption. If I use 'S' letter in my customized caption .bmp file, it is not showing properly in the captivate. Attached file is for your reference. I tried converting text into image in photoshop, still it shows the same thing. Any thoughts??
    Thanks in Advance,
    -Ajay

    OK.  That's what I thought.
    So what I think is going on here is due to the way Captivate assembles text captions that can stretch to any size based on the component images.  I think your corner image that contains the text is being stretched right at the point where the S character is located on the end of Congratulations.  Captivate is achieving the resizable text caption by repeating the last few pixels of each background image.
    If you want to test my theory, just make your Congratulations text slightly shorter (use a condensed font or make the font size smaller) and I think your issue will go away.

  • Strange issue in Report Builder

    Hi All,
    I am facing a strange issue in Report Builder.
    I am having a report which is currently in production. when i am opening that report and just saving it without making any changes, then also the size of the report is reducing from 238 to 204 kb.
    When i am executing this report in production then it is giving me the error "Invalid Body size"
    Please hlep me or else have to ask God to save me.
    Thanks
    Aryan

    Hi Hussien,
    I tried thart solution but it not worked. i put some debug statement in Before Parameter form, after Parameter form, before report triggers. When i am running that report i am getting the debug statement of Before and After Parameter triggers but it is failing somewhere in Before Report Trigger.
    I removed everything from Before Report Trigger and still the result is same "Invalid Body Size".
    Please Hussien give me a some pointer which stage is processed between After Parameter Form trigger and Before Report Trigger.
    Thanks
    Aryan

  • Strange issue with external monitor, only working when external speakers plugged in (using Thunderbolt to VGA adaptor)

    Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
    I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap Chinese knockoff adaptor).
    To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
    What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
    Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source.  What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
    Some other information:
    - Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
    - If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
    - The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
    Any information would be great – am I missing something here, or is this genuinely weird?

    Well, I went back into Best Buy to test on 3 other laptops (2 Asus, and their floor model for this Sony). It seems to be doing the same problem so at least I was able to rule out broken hardware issue on my particular laptop.
    Here's what I did to test:
    Since I couldn't really install Adobe Premiere on their machines, I used the DVIO software (http://www.carr-engineering.com/dvio.htm) and a 5 min clip I captured.  I transferred onto their machines, hooked up my Sony D8, and attempted to play the video.  It would play for 15 seconds and then stop and jitter with a loud noise (like it does on my laptop).  I even tried changing each machine's firewire driver to the legacy one and same results.  I pulled a brand new 4 pin to 4 pin firewire cable off their shelf and still the same problem.
    I think I've nailed it down to Win7x64 bit Home Edition not playing nice with Firewire driver.  Very annoying.  I can't find any concrete evidence of this from other users on any of the forums that have my particular problem, but from my own testing, it's all I can conclude.
    I have 2 other things I can try:
    1.  Opening the laptop and looking at the firewire to maybe find appropriate driver (ugh, I don't want to have to open this thing up).
    2.  Upgrading to Win7x64bit Pro and possibly testing with XP on the new MS Virtual PC (http://www.microsoft.com/windows/virtual-pc/).  I can't do it with my Home edition apparantly.
    Who needs to view video on an external TV anyways....sheeesh...(scarcasm).
    Tim

  • I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing.  Now album covers are interspersed with my pictures.  I have been using apple tv for a while and never had this happen before

    I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing.  Now album covers are interspersed with my pictures.  I have been using apple tv for a while and never had this happen before

    Are you watching this content though iCloud or though from iTunes on your local computer?  If it is from iCloud have you tried downloading the content to iTunes and watching it on ATV from that source to see if it still happens?  This is geerally a much more reliable way to view the content.  Easer to fast forward and rewind too.
    - I have a stable internet connection
    Clearlly you don't
    >(Ive tested on other devices)
    Which does not tell you anything about the specific connnection from ATV to iCloud.
    >I am able to stream Netflix problem free from my AppleTV without so much as a hicup
    Again which does not tell you anything about the specific connnection from ATV to iCloud.
    >- I am able to download the episodes to my phone, ipad, and computer without any issues
    Again which does not tell you anything about the specific connnection from ATV to iCloud.  It does remove your ISP throattly traffice as a possible cause though.  So that is good.
    Have you checked your wireless rounter?  Tried doing the factory restor on it?  Upgrading it's firmware?  Is it and or ATV getting extreamly hot when this problme happens?

Maybe you are looking for

  • Books not showing up on my iPad

    I have books that my Mac's iBooks see which don't show up on my iPad.    If I uncheck "All books" in the iTunes "books" tab, I can scroll down and see the books, but then I check "All books" again (Sync Books is checked), and I don't see the books I'

  • Solution sought: finding inter-linked pages within a site

    Hi, Is there a button or function that tells me what other pages link to a page that I have open at the time? I know about Find and Replace, Check Links Sitewide and Change Link Sitewide, but none of these (that I can work out anyway) seem to have wh

  • HT204382 My Mac will not open some movies

    My Mac will not open some movies from my emails.

  • Bounding Box Problems

    I am using Illustrator CS3. I have a document with art and text. When I click on a piece of art, there is a large bounding box (not really sure if that's what it's called) that encases the entire document and it's always attached to whatever piece of

  • Input Field with multiple selection

    I am planning to add an input field to my BSP application. I have already implemented a self-made F4 help for it. But now my customer wants a multiple-selection for it (as in the workbench, when you display the content of a database table). Is there