Calendar time interval

Hello,
This is one of the questions asked in the forum by some one else too some time back.
Using ADF 11g, By Default Calender component shows time interval of 1 hour. Can we configure it to show the time interval of 15 minutes.
For example, default calendar shows
1:00 AM
2:00 AM
3:00 AM
But I would need something like
1:00 AM
1:15 AM
1:30 AM
1:45 AM
2:00 AM
Any input is greatly appreciated.
Thanks....

I am also in need of this feature, any inputs/suggestions are appreciated.

Similar Messages

Time Interval for Daily Calendar in APEX 3

Hi,
we're looking at upgrading to Apex 3 and I have a question about the Daily Calendar time interval. Is there a way to change the interval to say, 15 minutes from the default 1 Hour?
Cheers
Kofi

Hello Kofi,
"Now looking at what I can see on apex.oracle.com, are you saying we'd just have to modify the daily calendar template?"The template only control the look of the calendar, not its functionality. If the default daily view meets your needs, you don't have to define any new templates.
"I'd imagine that the whatever is creating the tags that will be displayed by the template needs changing to incorporate the other 15 minute cells I would add"Most of the calendar functionality you can control can be defined on the "Calendar Attributes" tab. The most important is the date column. If this column includes reference of time (on top of the date, of course) the APEX engine will automatically associate your entry with the proper "Hour" row. You are not adding cells. You are adding calendar entries. If several of these entries share the same hour slot, APEX will put all of then in the same row.
The best way to understand it is simply define these entries. As I understand, you have access to apex.oracle.com, so it shouldn't be a problem.
Regards,
Arie.

Set Time Interval with custom fields in generic list with view(SPViewCollection.SPViewType.Calendar)

I need to set time interval range with custom date fields in sharepoint view SPViewCollection.SPViewType.Calendar. How to do that?
My code is this:
System.Collections.Specialized.StringCollection viewFields = new System.Collections.Specialized.StringCollection();
viewFields.Add("FechaInicio");
viewFields.Add("FechaFin");
string query = @"<Query>
<Where>
<DateRangesOverlap>
<FieldRef Name=""FechaInicio"" />
<FieldRef Name=""FechaFin"" />
<FieldRef Name=""RecurrenceID"" />
<Value Type=""DateTime"">
<Week />
</Value>
</DateRangesOverlap>
</Where>
</Query>";
SPView newView = reserva.Views.Add("CalendarView", viewFields, query, 0, true, true, SPViewCollection.SPViewType.Calendar, false);
"FechaInicio" and "FechaFinal" ara datetime fields in my generic list.
Thanks.

Hi,
According to your post, my understanding is that you want to see the calendar view begin and end time for the time interval.
We can use the SharePoint Manager to view the internal name for the begin and end time for the time interval.
Open SharePoint Manager 2013->click your site->click
Lists->select your list name->click Views->select your calendar view name->click the
Schema Xml to check the internal name for the time interval begin and end.
We can download the SharePoint Manager in here:
http://spm.codeplex.com/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Custom list - Calendar View - Time Interval

Hi all,
I have a custom list with "Project Start" and "Project End" columns. Then I have created a Calendar View. In the "Time Interval", I select "Project Start" for "Begin"
and "Project End" for "End".
In the programming code, how could I detect the column names that was chosen for "Begin" and "End" of the "Time Interval"? In this case, they are
"Project Start" and "Project End".
Thanks ^_^

Hi,
According to your post, my understanding is that you want to see the calendar view begin and end time for the time interval.
We can use the SharePoint Manager to view the internal name for the begin and end time for the time interval.
Open SharePoint Manager 2013->click your site->click
Lists->select your list name->click Views->select your calendar view name->click the
Schema Xml to check the internal name for the time interval begin and end.
We can download the SharePoint Manager in here:
http://spm.codeplex.com/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Fixed length time interval variable

Hello experts,
I would like to define a time interval variable between a start date (entered by the user) and end date which is exactly 12 periods after the start date (the system somehow calculates the end date = start date + 12).
The same principle should be used for different periods such as day, week, month. For instance for a calendar day variable it should calculate the end date = start date + 12 days, for a calendar week start date = start date + 12 weeks etc.
How such behaviour with a variable could be achieved ?
Thanks in advance
Rado

Hi,
Just create a variable ZCDATE of user exit type and code in the exit ZXRSRU01 to populate it.
DATA: ZE_T_RANGE TYPE RSR_T_RANGESID WITH HEADER LINE.
Current date
    when 'ZCDATE'. " Your Variable
      IF I_STEP = 2.
        ZE_T_RANGE-SIGN    = 'I'.
        ZE_T_RANGE-OPT     = 'EQ'.
        ZE_T_RANGE-LOW     = SY-DATUM.
        APPEND ZE_T_RANGE TO E_T_RANGE.
        clear ZE_T_RANGE.
      ENDIF.
Thanks,
Debasish

How can I handle a time interval ?

I have an application in which the users will enter the time spent on specific activities. The time spent will be in hours and minutes(eg. 8.00, 2.30, 4.50 ). Which is the best approach in Java to represent this time interval and to perform basic operations like sum?
I have looked into the API but The classes I have found (Date, Time, Calendar) all refer to instant of time not to interval of time.
Thanks for your help.
Federico.

Parse the times into Date objects, (Using DateFormat.getTimeInstance etc.).
Date stores the time in milliseconds since 1970. So you just have to subtract.
final static DateFormat timeFormat = DateFormat.getTimeInstance();
Date startTime = timeFormat.parse(strStart);
Date endTime = timeFormat.parse(strEnd);
long gapMillis = endTime.getTime() - startTime.getTime();You may want to check that endtime is after starttime and, if not, add a day using Calendar.

Calendar time zone on iOS 7

the time zone has disappearead on the calendar after updating to ios 7, how can it be defined? I travel a lot and this feature was very helpful in avoiding errors.

You have to enable Time Zone Support under Settings -> Mail, Contacts, Calendars -> Time Zone Support (in the Calendars section at the bottom). If you enable the setting while you are in the middle of creating an event, you have to cancel and re-create it.
Now, when you create a new Calendar entry, it will have a Time Zone field under the End time setting.

Calendar times off by 1 hour

Updated to new version of iTouch software today. After process was complete all of my calendar entry times for my corporate email account are off by 1 hour.

Some things you can check to troubleshoot this include:
Go to icloud.com, sign into your iCloud account, click your name at the top and choose Account Settings, click Time Zone and be sure it shows the correct time zone and that you have selected a city near you. Then open your calendar on icloud.com, click the gear-shaped icon on the bottom left and choose Preferences, click the Advanced tab and make sure you have not checked time zone support at the top.
On your iOS devices, go to Settings>Mail,Contacts,Calendars>Time Zone Support (in the Calendars section) and make sure this is set to Off. If you have a Mac, open the Calendar app and to to Mail>Preferences>Advances and uncheck “Turn on time zone support”.

Reducing the time interval in file Adpt to write a flat file at a location

Hi All,
I hav a scenario where i hav to write a flat file (XXX.txt) to a location. b4 doing that, i hav to check whether XXX.txt already exists or not. If it doesn't exists then i hav to write the XXX.txt file there. if it already exists, then i hav to wait until that xxx.txt file gets deleted.
In the receiver file adapter v hav an option file construction mode = create which does the same thing. but the problem here is it is taking too long (more than 5 min) which is not at all acceptable in my case (it is ok if it takes 1 min).
Is there any way to reduce the time interval using the same option?
Or do we hav any work around solution for acheiving the same scenario?
any help wud b appreciated.
Thnx in Adv.
Anil

Anil
As far as my knowledge goes I think it is not possible because we are not going to do anything from our end. XI is doing processing and creating a file for you. But you might be sending a large file at a time. So you have to improve the performance in your scenario. You check this urls on how to improve performance in XI:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
Improving performence in XI
Maximum Permitted File Size in XI
---Satish

Fatch data from a table after a given time interval

Hello
I want to fetch date from a table after a fixed time interval is there any
way to do it.
thanks

Not sure what you want. But maybe this helps.
SELECT date+interval FROM atable;
Also if you tell us more about the business case the answers could be more to the point.

How to take the data from excel list to sap r/3(with time interval)

hi experts,
   how to transfer the data from a third party system(if it is in format of excel) to sap r/3.with that in a particular time interval,it will delete the data from excel sheet.

Hi
use the Fm
'ALSM_EXCEL_TO_INTERNAL_TABLE'
       EXPORTING
            filename                = p_path
            i_begin_col             = '1'
            i_begin_row             = '2'
            i_end_col               = '2'
            i_end_row               = '500'
      giving the starting row and column and passing the ending row and column name
Reward points if useful........
Regards,
Nitin Sachdeva

What is a fast way to drive a HP53132A counter to do real time, "time interval" measurements?

Right now I run my system on a simple PCI GPIB bus. The fastest I can the time interval measurement is at 100 Hz. However, the has 350 ns timing and the PC running the program is much faster than this. So I should be able to achieve a rate of at least 10 kHz (depending on the counter of course). Do you have any suggestions for the way to set up the counter for the fastest measurement?

I think that you're running into a limitation of the counter itself. My manual for the 53131 says that it can can do a maximum of 200 GPIB measurements per second. I think that the 53132 is similar except for extended resolution. What you might try is the STATS mode where you command the counter to take a number of measurements and then calculate the statistic. It is generally fster to let an instrument do a series of measurements and accumulate the results than to try and transfer one measurement at a time over the GPIB bus. VXI, PCI, PXI instruments can do things a lot faster so that might be an option as well. You should also be aware that your rate of 10 kHz requires timing resolution greater than what is in a PC (a PC has 1 msec resolution at best a
nd it's not deterministic at all) so if you need something accurate, you'll have to use external hardware timing.

Time interval in Asset master record.

Hi All,
I am creating asset master record using AS01. Then I am doing intercompany transfer of asset via T Code ABT1N.
If I view the asset time dependant data after this I am getting the following:
1. The time interval mentioned is 01.01.1900 till 31.08.2007.
2. When I add the furthur time interval I am getting the ABAP dump.
Please help on this.

Hi,
When you look in the dump you see on the begin somwere of the dump
> here you see the reason for the dump, perhaps there is field what can help you to solve the problem.
You can have a look with the programmer and or create a message to SAP support.
Paul

Invalid Time Interval error

Hi Friends,
I am loading HR data from Source. It loaded correctly without issues upto PSA and when i trigger the DTP from the PSA to the IO 0EMPLOYEE, I am getting the following error.
"0EMPLOYEE : Data record 25 ('00001028 ') : Invalid time interval '['20070731'/'20070527'] '[from/to]     RSDMD     189".
It shows about 7 entries in the error for employee 00001028.
When i check the data in PSA the from and to Values are correct.
Person           Start Date        End Date
1028              01.10.2002      26.05.2007
                      27.05.2007      31.07.2007
                      01.08.2007      31.01.2008
                      01.02.2008      29.02.2008
                      01.03.2008      27.09.2008
                      28.09.2002      31..12.2008
                      01.01.2009      31.12.9999
So, the from Data and to Date is correct yet I am getting the Invalid Time Interval error and my data load is failing.
It is happening for a all the records.
Can someone please tell me /suggets me how to resolve this issue?.
Yore help is appreciated.
Regards
BN

Hi,
Please check the note:
310304 -> DATETO/DATEFROM:Extracting time-dependent master
http://help.sap.
com/saphelp_nw70/helpdata/en/13/c3e7379899d06fe10000009b38f8cf/frameset.
htm
It should resolved your issue.
Thanks,
Venkat

Calendar Time Issue

I'm having a problem with viewing appointments in my calendar, and since I live in Saskatchewan we don't change our time, and the rest of the phone, including the main time on the phone are correct.
My issue is the "day view" shows everything an hour ahead, including the red line listing 4:18 PM, it's only 3:18 PM.
Also every appointment is listed an hour ahead, had one this morning at 8 AM and it shows 9 AM in the day view.
Even more confusing is when I click and open that calendar item, it shows the correct start time of 8 AM.
Any assistance anyone can provide would be greatly appreciated.
This is very annoying to say the least, especially with all appointments now being one hour ahead in the day view on the calendar...
My time zones settings are correct in the System Settings/Date and Time it is set to Saskatchewan (-6).

By changing my time display to 24 hours, under Settings/Date and Time and then moving the slider to ON for 24-Hour TIME, the calendar time view issues have disappeared.
Unfortunately the text messages are still out by an hour when viewing them individually. The time is correct on the main page when "conversations" are listed and the most recent text message is displayed, but going into each conversation each text message there displays an hour later than it should.
Hopefully this is something that BlackBerry is working on for the next update to the z10 software.

Calendar time interval

Similar Messages

Maybe you are looking for