Calibrating and saving a profile for a monitor then loading it for another

How do you save a calibration setting and then see it in the list of loadable calibrations for another monitor? I have identical dual monitors, but cannot seem to figure out how to share a calibration setting between the two.

yes. Even with that unchecked, each window on each monitor only shows only the user profiles I created exclusively on that particular monitor even though they both show all the same standard preset profiles.

Similar Messages

  • When I have resized and saved an image in Photoshop (CS, version 8.0 for Mac) using image size, why is it so large when I open it in preview or another image viewer? Has it actually saved according to the size I specified?

    When I have resized and saved an image in Photoshop (CS, version 8.0 for Mac) using image size, why is it so large when I open it in preview or another image viewer? Has it actually saved according to the size I specified?

    You want to view the image at the Print Size, which represents the size that shows in the Image>Resize Dialog.
    View>Print Size
    Since screen resolution is almost always lower that the print resolution (somewhere between 72 and 96 usually), images will always look bigger on the screen, unless you view them at print size.
    (apple Retina displays have a much higher resolution than normal screens, closer to the average print size resolution)
    more info:
    Photoshop Help | Image size and resolution

  • When i tap "update" on an app, or try and download a new app i get the loading wheel for around a second then it goes back to showing "update" and does nothing.  Any solutions for this?

    When i tap "update" on an app, or try and download a new app i get the loading wheel for around a second then it goes back to showing "update" and does nothing.  Any solutions for this?  This is relevant to an iPhone 5S running iOS 8

    If you're really running iOS 8, you should be posting in the Developer's Forum, as you well know since you signed an NDA when you signed up for the Developer's program.

  • I saved a profile to my desktop then deleted it and it deleted other files which I can no longer find

    I created a profile and saved it to the desktop. (I have read since then not to do this but it's too late). I then deleted the profile and all the files. When I did this it deleted everything I had saved on my desktop. I have searched the hard drive for the files and they are nowhere to be found. Is there anyway to recover them?

    You will have to use an undelete utility like Recuva to get those files back.
    *Recuva: http://www.piriform.com/recuva
    You should never specify an existing folder for a new profile unless that folder is an existing profile.
    If you remove the files in the profile when you delete that profile via the Profile Manager then all files will be removed as you've found out.

  • HT5642 my ipod touch 5th gen is not recognized since I tried to update ios. It says it is in recovery mode but it just keeps looping back to recovery mode. I tried holging power button for 3 sec. then both home and power for 10 sec then home button for 20

    My ipod touch 5th generation went into recovery mode when I tried to update ios. When I try to recover it just keeps looping back to recovery mode. I tried to hold the power button for 3 secs. then simultaneously hold the home button for 10 secs. then hold only power button for 20 secs. I tried this several times to no avail. This is my daughter's ipod. I am computer illiterate and I'm not sure what else to try.

    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Everytime i open some websites, it displays the page for a while then load to another blank page.

    hai. i need help. and just for heads up, i;m not computer/tech savvy.
    i dont remember when this problem was started (maybe around 2 or 3 months ago) but everytime i opened some sites, the page displayed for a while then it reload itself and shown a blank page. the link is still the same with the link i tried to access, it just keep loading and shown blank page till it stop loading. refreshing the page wont help. usually i need to click 'Back' then while it shown the page i click 'X' to stop the page loading, so i can see the page.
    but if i need to download files, stopping the page wont make me able to downloaded the files since the page didnt fully loaded.
    the websites i encountered this was (so far) :
    - Indowebster (download page)
    - wiki.d-addicts.com (a wikipedia kind of page)
    - photobucket (just encountered this today)
    - and 1 or 2 other sites, i forgot.
    but i can access all those sites just fine with IE. I also able to access it in Mozilla thru my work computer. at first this dint really bother me as i can just click 'stop loading page' or found another download sites for downloading. but as today i experienced it with photobucket 9which as far as i know didnt happened before) it made me worry that soon i would experiencing this with another sites too.
    editted to add info :
    i already clear cache and cookies. also disable all extensions in my add-ons. from some discussion page, many of them found that this was caused by Real-Player. i have uninstalled Real Player and have disabled the Real Player Plugins long before this problem occured. so i dont think Real Player was the caused.

    hi.. actually before i was afraid to update anything other than anti-virus, since i read many people seems updating something and turns out they got malware/virus with it.
    but i have update it to Firefox 21 (the newest version it seems) and didnt encounter any problem again. and hope not. it just the new version disable my orbitdownloader. any suggestion to bring it back? (or should i post new thread?)

  • My sister gave me her old Iphone 4 but and i logged out of her apple accounted and logged into mine but sadly whenever i try to update or download a app ot asks for my password then it ask for hers why is that ?

    I basically got this phone about 2 weeks ago and i cannot download or update anything . I would mind it asking for my sisters apple password but she doesn't know it so how do i take it off ? It will ask for mine then a few seconds later it will ask for hers . In my settings everything is signed in as me but i just don't get why it still ask for her apple id. I have logged out and reset all my settings and it still ask for her apple id. If i can figure out how do i get her password ?

    Any apps that she downloaded onto the device are tied to her apple ID.  They cannot be transferred to another account.  To update those apps, you would either need her password, or you could delete the apps and download them using your own apple id.

  • I accidentally placed my iPod in some water it was in there for about 45 seconds and i immeadiatly took it out. i then used it for the rest of the night but woke up to it not on and wouldnt turn on. i have it in a rice bag but i'm worried it wont work.

    I'm very worried about my iPod touch 4th generation coming back on after falling in water.

    It may or may not work after some time. All you  can do is see what happens.
    Apple will exchange your iPod for a refurbished one for $199 for the 64 GB one and $99 for the other ones.

  • HT204406 When itunes is open on my pc and iTunes match begins to run, the whole system then freezes and I have to close itunes. it then takes ages for itunes to reopen whlist it check my diary. What can I do?

    I am having major problems with itunes match. I cannot operate it from my pc as every time it tries to get the information itunes stops responding and shuts down. It then can take 15 minutes of more to reopen itunes as it check my library. I have reinstalled itunes and my software is up to date. It is intensly irritating as I have to remember to tune match off or else I cannot do anything in itunes. Any ideas or do I just tell Apple I want my money back?

    If I am persistent and keep tapping the download icon then one by one I can download the entire album but it normally takes a few hours/days. Anyone else had this?

  • How do you crop an audio that is in the background for it to then start again in another point in iMovie?

    I'm working on this project and it has background music. I need the background music to stop (i.e crop the background music) and then make it start in another point. In simpler words I just need to crop a part of the audio out and continue by fading, or to simply add two background audios.

    You're in much more control with your audio, when you do not use the 'background' feature (which is meant for a very convenient 'auto mode'), but use audio as 'clips':
    drag your background music onto the first video-clip of your Project
    it appears as a green bar
    you can process this bar as any other clip in iMovie:
    move it, shorten it, split it, copy it. plus, you can apply fades at front at end ....
    http://help.apple.com/imovie/#mov3b0fa95d
    http://help.apple.com/imovie/#mov3b0fa323

  • AppleWorks for Windows crashes when loading -asks for QuickTime 4.1

    I've run into a QuickTime error when loading AppleWorks 6.2.9 for Windows (Education version).  The message says it needs QuickTime 4.1 to run; though I already have QuickTime 7 installed ( my windows has just been upgraded to Windows 7).  Anyone know if this can be cured?  Any suggestions gratefully received!

    First, the last version of AppleWorks 6 for Windows is 6.2.2. AppleWorks 6.2.9 is the last Mac version.
    I thought I had AppleWorks 6.2.2 installed in Windows 7 in Parallels 7 but I don't. I'm not sure when I'll have the chance to do that.
    In the meantime, it might be best to start over. Delete QuickTime 7 & AppleWorks 6 & then reinstall from the AW CD including QuickTime 4.1. You can then reinstall QuickTime 7 after AW is up & running.

  • Bug - Color Management Photoshop 11 and OS X 10.6 Dual Monitors

    I need to know if it's just me, or others are seeing this.
    Color management doesn't seem to work properly on dual monitors (MBP + Dell 2408) with Photoshop 11/CS4 and 10.6.
    Each of my monitors is independently calibrated and all other apps work fine.  For reference Lightroom 2.4/Preview 5.0/FireFox 3.5.2 all render properly across both monitors.  Under 10.5 Preview 4.X did not render properly across two monitors, I was so happy in 10.6 it finally did, but PS is WAY more important so I'm kinda bummed.
    Anyway, this seems to only happen on the 2nd monitor.  If I move the menu bar (Prefs/Displays/Arrangement) to the external monitor making it primary monitor then it works for that monitor, but no longer for the laptop display.  Photoshop render images on the 2nd monitor way washed out, but normally on the primary.
    Photoshop 11.0.1 worked fine for me on dual monitors under 10.5.

    So if you've read the links above regarding the "default monitor" issue, people have suggested that a potential workaround is to go to System Preferences>Displays>Arrangement>drag the menu bar from the first diplay to the second
    Essentially you make your secondary monitor the default display.
    For me what this does to PS is that it now displays the matching colors to Lr in the secondary display (which is now the default display with the menu bar at the top), BUT! when I drag the PS window back into my MacBook display it appears OVERLY saturated...
    Strangely Lr appears the same in both windows, AND MORE IMPORTANTLY with the same colors, saturation, brightness, just as it did before I made my Dell 2405FPW the default display. Basically, Lr hasn't shifted in color from display to display or even from display to display after making the secondary monitor my new default display. It has retained the same integrity of colors through all these changes.
    Which begs the question, if Lr can't handle dual displays and always uses the color profile of the display it begins in (starts running in), then why does it never shift in color and still look exactly the same after I've made my Dell 2405FPW my primary display?
    And actually, if you look really really carefully, Lr DOES produce a color shift between displays as you drag it from one screen to the next. It's extremely fast and happens pretty much as you get 0.5 to 1 inch of the window into the secondary display. It's subtle on my monitor too, which leads me to believe that it performs this color correction properly, quickly, and seamlessly.
    What if, my Photoshop 10.0 (old version of CS3) is not registering and understanding the secondary display's color profile correctly? What if it really is PS's fault because everything else looks right? Maybe the issue I'm having is different from what others are experiencing, after all we're in 10.6 now and most of these issues were reported in 10.4 and 10.5? I should probably upgrade my PS CS3 and see what happens?
    jb, what version of PS do you have?

  • Fix for Samsung Monitor not working after 10.6 install

    This quick fix solution worked for me. Hope it works for you:
    I have an 15inch MacBook Pro that I've just installed Snow Leopard 10.6.3 on.
    Prior to this install, I've had it hooked up to my Samsung SyncMaster 2243 via an Apple MDP/VGA adapter and a third party VGA cable. It has been flashing on and off a black screen every now and then for the past 2 years and I googled that it was just a crappy communication between the MBP and the Samsung... but now since installing 10.6.3, the Samsung display just flashes the desktop for a second then turns black for good - occationally flashing analogue/digtal prompt display. Tried everything for hours. Nothing worked, thought I was gonna have to buy a new all Apple VGA lead then came across this solution. Tried it and it worked IMMEDIATLY!!! And the monitor doesn't flash black anymore AT ALL!
    WHAT TO DO TO FIX:
    Go to => System Preferences  => Energy Saver => change graphic settings to Higher Performace.
    Cheers!!

    I figured it out.  NVIDIA has an update specifically for 10.6.8 and several of their video GPU's.  go HERE to download the driver. It also took away the slow response and flicker I was experiencing.
    Here is the update info:
    CUDA  Application Support:
      In order to run Mac OS X Applications that leverage the CUDA architecture of  the Quadro 4000 for Mac product, users will need to download and install the CUDA 4.x driver  for Mac located here.
    New in Release 256.02.25f01:
    This driver update is required if upgrading to the  latest Mac OS X v10.6.8.
    Contains performance improvements for a wide range  of applications
    Contains fixes for several corruption and crash  bugs, including issues with Autodesk Mudbox, and World of Warcraft.
    Contains support for display rotation.
    Adds Driver Archive/Restore Functionality.

  • What monitor should I get for my t500?

    I am having problems finding any display port monitors. Am I just missing them, or do I just need to get an adapter and buy a DVI or HDMI monitor?
    I am thinking a 20-22 inch with WSXGA+ or WUXGA with a price range of $200-$300
    Thanks!
    Thinkpad T500 - Intel Core2 P8400 (2.26GHz), 4 gigs of ram, 160GB/7200rpm hard drive, ATI 3650 GPU, WSXGA+ panel

    The Dell 24 inch 2408WFP have them, there are not many in the 20 -22 inch range that has the displayport, so if you are looking for those monitors then you should just get an display port to HDMI or DVI converter, preferrably you should get an HDMI converter, then an HDMI to DVI cable, then down the line, if you ever want to use HDMI monitor, all you have to do is to get an HDMI cable.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Special characters and saving and read_text

    I have a problem in serviceorders. when a long text of an operation is created and saved with a special character like / then everything is fine.
    when the text of the operation is changed then the changes are not always written back to the database
    when I retrieve the text object with read_text then the text before the changes is retrieved ?
    strange part is that it is also not consistent. sometimes it retrieves the old version of the text but when I try to simulate the problem it also works fine ?
    is the problem caused by the / or is the problem an incosistency of some kind ?
    kind regards
    arthur

    I found in the debugging in IW32 that SAP also had experienced the same problem and have programmed a sollution for it which retrieves the operation short text if there is a difference with the first line of the long text

Maybe you are looking for