Call merge not working properly in iphone6 iOS 8.1

I am experiencing a problem with call merging in my iPhone 6 iOS 8.1 (T-Mobile). Sometimes it is hanging when I am tapping on merge option, hanging in the sense both the call remains in hold state and have to disconnect and call back, once it even was not able to disconnect a call after hanging.

Similar Messages

After update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call

after update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call
It is not practicale to do this always any one faces the same problem

There may be a problem with the SIM card. Get a new SIM card from your carrier - there should be no charge for a replacement.
If no change with a new SIM card, the standard troubleshooting steps in order are:
Power your iPhone off and on.
An iPhone reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
Restore your iPhone with iTunes from your iPhone's backup.
Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
If no change after any of these steps in order, your iPhone has a hardware problem.

Bluetooth and calls are not working properly

Please somebody help me!!!
I have a Hyundai Elantra 2012 and a Curve 9300, the bluetooth has been working fine for a year, however my phone is having problems to connect to my car, what is funny is that I can watch a video and the sound will come out from my car's speakers, I can be listening to a mp3 by using the car's speaker, but phone calls won't get through, I tried to connect my wife's BB10 to my car and everything is perfect.
My question is, what went wrong???
Thank you!!!

I have a similar problem
Product - HP Pavillion dv6 7135nr
OS - Win 8
Bios - F24
After updgrading from win 7 to win 8 following are the issues I am facing
a. Wi-Fi not working
b. Bluetooth not working
Earlier I spoke to online chat and on their advise updated the drivers for my laptop
From the link
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=5273543&a...;
Following were installed successfully but still the wifi n bluetooth are not working
1. Ralink 802.11 Wireless LAN Adapter - but problem is not resolved.
On troubleshooting the network connection - I'm able to enable / disable the wireless adaptor but not able to connect. as it says its OFF.
The wireless on/off function key is continuously showing red light and its not switching on
2. Broadcom Bluetooth Software - was installed when i connected through lan cable.
3. Also installed the latest broadcom driver frrom ftp://ftp.hp.com/pub/softpaq/sp61501-62000/sp61836.exe was installed
4. The HP Wireless Button driver sp59835 available at
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-112632-1
was also installed
Funnily, at times the wifi starts working and the colour of the F12 key changes to white after the laptop has been on sleep mode. Although this does not happen everytime it wakes up from sleep mode.
Pl. give some solution

Caller id not working after upgrade to IOS 8.

I have an iPhone 5 which I upgraded to IOS 8. After the upgrade the caller id does not shows the person's name (which I have on my Contacts) on the screen. Now I installed IOS 8.1.1 but the problem persists. This happens also on an iPhone 5S from my office.
Any recommendations?

Do not pay attention to the previous comment. Sometimes names are shown for numbers stored in IOS address book or Exchange and sometimes (most of the time) not.

Caller id not working properly Please Help!!

Mt caller ID ask me me to enter the contact but I know it is in there already and it just shows the number when it used to show the person's name. I don't know how to fix this or is something wrong with my phone?
Thanks !!!

Bobaganoosh wrote:
Thanks that worked !! again THANK YOU for the help
Glad it all worked out. You are welcome

END CALL does not work properly SUPER ANNOYING

This has become incredibly annoying to the point where I'm considering getting rid of this phone. Tap as much as you like, this sucker will not let go consistantly and reliably. Is there a software fix for this?

Just gently touch the end call red button.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Nokia 301 called id not working

Caller id not working properly in my new nokia 301 name does not display
it does not work if the number is stored in +968 99999999 format
can somebody help
i have more than 500 numbers stored in the same above format

Have you checked for duplicates and what storage you are using,Use only one storage,either phone or sim.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

IMessages still not work properly

My iMessage still not work properly after updated iOS 7.0.3, still can not directly sent to any user using iPhone, there messages will become SMS.

http://support.apple.com/kb/ts2755

I want to installed iOS 8 in iphone6.because ios 8.2.1 not working properly. I realized it in slow than old verson.so please guide me how to install old verson

I Need to download ios8 old verson because not working properly.so please guide how to download

DDowngrading isn't supported by Apple.
try setting -general-reset-reset network settings

I am facing a new problem after a missed call. i phone will get freez on its lock screen after a miss call. Its seems that its main screen touch is not working properly. This problem occurs after each and every missed call.

I'm using iphone 5s with ios 7.1.2 & I am facing a new problem after every missed call. i phone gets freezed on its lock screen. It seems that its main screen touch is not working properly. It should be bug introduced by apple . This problem occurs after each and every missed call .There is no patch announcement for this issue yet. There are few workaround to fix this issue: Reboot your iphone. But its irritating to reboot the phone frequently after each issue....

Hello dipthebe,
Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Regards,
-Norm G.

Merge calls is not working in my iphone

merge calls is not working in my i phone i checked it for 5 times not working help me i am new for this

Hello naveen_199155,
Welcome to the Apple Support Communities!
I understand that you would like to merge calls together on your iPhone, but it is not working as expected. There are a couple of different resources I would suggest reading over in this situation.
First, depending on whether you have a GSM network iPhone or a CDMA network iPhone, the Conference calls feature may work differently. Please review the first attached article for this information.
iPhone: Understanding phone features - Apple Support
Conference calls
Supports up to five calls simultaneously
Supports up to two calls simultaneously.
CDMA networks may not be able to add, swap, or merge calls in certain situations. See the iPhone user guide for more details.
Another valuable resource, just to ensure the correct steps are being taken to set up a conference call, is the iOS 8 User Guide (page 51). Please read over this for more information on the process as well as why the feature may not be working if you are using a CDMA iPhone.
manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Have a great day,
Joe

Subvi does not work properly when called inside a vi

Hello Every body
thanks for your help. i am using a sub vi for sine signal generation. as a vi it works fine. but when i called this subvi inside another VI it gives some problems. for example timer indicator works properly.it reinitializes as well in the sub vi, but in the main VI it does not work properly. means does not count the time.in the sub vi on the fly i can change the values of frequency and amplitude in real time, but when i use as sub vi, it does not reponse as i change the values in the control arrays.similarly pause and continue works properly in the sub vi, but once again in the main VI, it does not work properly.graph indicator also work properly in the sub vi. but here once again it does not work properly in the main VI.the pause resume indicator also does not blink, when it is continue. in the subvi it blinks very well.generally why the sub vi does not work properly inside the VI?i am sending my VI and sub vis.
any tips would be highly appreciated.
thanks
Regards
Attachments:
vi.zip ‏87 KB

I just want to add some more details to Dan's answer. The subVI is acting exactly like you've coded it. The mistake is in understanding how subVIs work. When you call a subVI (or a function in any other language), you pass some parameters to it, the subVI does it's thing and returns values. the subVI does not accept new parameters from the calling VI until it returns to the caller and the caller runs the subVI again. In your case, you have a subVI with a while loop. You have some front panel control wired to the subVI's stop terminal. When first called, the value is false. So the subVI will keep running until the subVI's stop button becomes true but you cannot change it from main until the subVI finishes and returns so the subVI will never stop. As Dan says, the solution is pass references of front panel controls to the subVI and have the subVI monitor those references for changes and to update references to indicators on Main. You subVI does not need any front panel controls or indicators of it's own.

TS3406 magic jack is not working properly. I can call out and hear the person i have called, but they can't hear me.

My Magic Jack is not working properly. I can make a call and the person I have called can hear me but I can't hear them. What can I do to fix this?

if it play not sound at all then it's likely the hardware issue where the headset detector gets stuck
like this the detector just is stuck in the opposite way
https://discussions.apple.com/thread/1343532?start=315&tstart=0
more
iphone stuck in headphone mode

My iphone battery is not working properly as compare to earlier after IOS 7 Update. should i change my battery and if yes then how much it costs in india?

My iphone battery is not working properly as compare to earlier after IOS 7 update.
Should i change my battery if yes then how much it will cost in india??

Turning off things in settings, restoring as new phone, etc. everything I've seen on forums and CNet etc sites

TS1630 My Iphone 4s reciever is not working properly, when i call someone from my iphone 4s. can any one help me how to solve this problem?

My Iphone 4s reciever is not working properly, when i call someone from my iphone 4s. can any one help me how to solve this problem?

You might like to define "not working properly".

Call merge not working properly in iphone6 iOS 8.1

Similar Messages

Maybe you are looking for