Call SmartForm in RFC

We have a RFC calling a smartform and passing parameters to it. But I just cannot get the right results. It looks like an auth issue to me because the program works well using some account (say, UserA) but not well using other accounts(UserB). However, Basis did an auth trace and didn't find anything wrong.
I tried to run this RFC via se37. One interesting fact is that it doesn't pop up a screen (smartform) for input using USserA but it does using UserB. I canceled the screen and then got the wrong results.
I hope I can find luck here. Please kindly let me know your solution if you had the same issue before. Many thanks to you!
Edited by: Jackyork on Dec 14, 2011 11:48 PM

Hi,
I hope yes you can write the RFC fm code inside the layout of the smartforms, but the problem is if RFC could not able to fetch the data from R/3 some times, or if it could not able to find the right records then it will return with error / blank records. To avoid all this kind of problems its better to write the same code in your driver program. In case if you dont get the data from R/3 then you can control the layout set from triggering.
Regards,
Satya

Similar Messages

Is it possible to call custom designed RFC function module, apart from BAPI

Hi Friends,
1. Is it possible to call custom designed RFC function module, apart from BAPI.
2. Why we call it Adaptive RFC layer, Since every time the JCO layer updated with SAP, Why cant be dynamic.
Thanx for Ur time.
Cheers,
Sam

Also check <a href="http://help.sap.com/saphelp_nw04/helpdata/en/41/38bc8f813719488ddc9d9b21251ec3/frameset.htm">here</a> for more information on aRFC. Here you can find why it is called adaptive.
Regards,
Christophe

How do we call smartforms in abap program or web services

how do we call smartforms in abap program or web services
How many types of smartforms are there?
points will be rewarded

Hi
See this sample program
Using the fun module smartform is called from the program
Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Reward points for useful Answers
Regards
Anji

How to call smartform FM after using SSF_FUNCTION_MODULE_NAME?

Hi Experts,
How to call smartform FM after using SSF_FUNCTION_MODULE_NAME?
I mean, in driver program i called SSF_FUNCTION_MODULE_NAME to get the related FM for my smart form. after that How do I call it(smartform fm) . I tried to call by pressing PATTERN button in Report. but it is showing FM is not exist error.
Call function SSF_FUNCTION_MODULE_NAME
Export
formname = 'zsmartform'
import
fm_name = function_name.
function_name is stored the corresponding smartform fm. then How do i call it to process my smartform?
thanks in advance.

hi,
Chk this sample.
DATA: p_output_options TYPE ssfcompop, "occurs 0 with header line
p_control_parameters TYPE ssfctrlop. "occurs 0 with header line
p_output_options-TDCOPIES = 3. "number of copies.
p_output_options-tddest = 'LP01'. "def
p_control_parameters-no_dialog = 'X'. "no dilog box
p_control_parameters-preview = 'X'. "no preview
DATA : v_form_name TYPE rs38l_fnam.
*---- Function to get the function module name of the ----
*---- specified Smart form. ----
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'GIVE YOUR SMART FORM NAME'
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
fm_name = v_form_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3 .
*---- Function Module to call the Smart Form ----
*step 1 - go to ur smart form
*step2 - take environment
*step3-take function module name
*copy that unique number.
*step4 -come back to ur driver program.
*step5 - place ur cursur here. take patter,.give that unique number.
*at that time u will get the below code.
*step6 - rename that unique number with 'v_form_name' in the code generated by pattern.
CALL FUNCTION v_form_name
EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_PARAMETERS =
control_parameters = p_control_parameters
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
output_options = p_output_options
user_settings = ' '
* ARCHIVE_INDEX_TAB =
* IMPORTING
* DOCUMENT_OUTPUT_INFO =
* JOB_OUTPUT_INFO =
* JOB_OUTPUT_OPTIONS =
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
for any clarifiaction pls revert.
regards,
Reshma

SAP adapter giving the merged result set (First RFC call data + Second RFC call data) for second RFC call

I have a WCF Adapter service to call a SAP RFC. When I call the RFC first time, it gives me correct no of result set but when I call this RFC second time immediately after first call, it gives me merged result set (First Result set + Second Result Set).
e.g. We have a RFC which receives vendor number and blank object of result set as parameter and gives back the list of purchase orders as Response in object of result set for that vendor.
Suppose, we have a vendor "a" and vendor "b". For vendor "a" there are 5 purchase orders and for vendor "b", we have 4 purchase orders in SAP. When I call the WCF adapter service for this RFC for vendor "a",
it gives me 5 purchase orders. Immediately after first call, when I call WCF service for vendor "b", it gives me 9 (5+4) purchase order records which is wrong.
In brief, one RFC call is affected by its previous call.
For each new WCF request, a new object of result set is created, connection is opened, rfc is executed and connection is closed.
Can anybody have any idea on this?
Thanks.
Thanks, Nishant Gupta

Hi，
Please refer to the document
http://seroter.wordpress.com/biztalk-and-wcf-part-vii-about-the-biztalk-adapter-pack/

Call Transaction Through RFC

Hi ,
I am trying to do a call transaction through RFC call from a Middleware which is a CPIC user (only communication Non dialog User ) .
Call transaction does gets executed without any error but it does not update any data.But when I run it through my user id it works absolutely fine .
I am not sure what is causing the issue
Security authorization?
RFC through Non Dialog user ?
Paramters missing in RFC ?
Paramatertes missing in call transaction option?
If anyone of you has faced a similiar issue then please let me know the path forward.
Thanks
Vikas

Hi Vikas,
The problem is in Authorization? And check the mode of Process Synchoronus or asynchoronous? Both the RFC and CALL transaction should be Same /
Thanks
MAnju

How to call smartform in me54n

Hai All,
Iam developing a smartform for PR print with ztcode,the user asked me that,he dont want seperate tcode,in me54n tcode itself he want
print.I have tried in the enhancement spot but it is not firing.
Regards,
Siva jyothi.

Hi ,
The print button creates a spool number through which you can get ALV output of the ITEM details but cannot call smartform from that.
PR is just an internal document.There is no other way to do it(As far as i know).
You now have only two options to go for:
1) Create a subscreen with a pushbutton , and then call the driver program to print the smartform.
2) A Z transaction to print the PR , which you have already done.
Let me know if you find any other way to do it.
Br.
Giri

Call Smartforms in WD

Hi all,
i want to print the data that i have in Portal (WD) in a PDF via Smartforms,
can somebody tell me how can i do this?
Best Regards

get the Smartform function module
call smartform
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
 EXPORTING
 FORMNAME = '<Smartform name>'
 IMPORTING
 FM_NAME = LV_FUNC_MOD_NAME
 EXCEPTIONS
 NO_FORM = 1
 NO_FUNCTION_MODULE = 2
 OTHERS = 3.
IF SY-SUBRC <> 0 .
RETURN.
ENDIF.
call LV_FUNC_MOD_NAME with Control parameter NO_DIALOG,GET_OTF marking X
*convert the OTF to PDF using
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
 FORMAT = 'PDF'
 MAX_LINEWIDTH = 132
IMPORTING
 BIN_FILESIZE = LV_LENGTH
 BIN_FILE = LV_XSTRING
TABLES
 OTF = LT_RETURN-OTFDATA
 LINES = LT_TLINE
EXCEPTIONS
 ERR_MAX_LINEWIDTH = 1
 ERR_FORMAT = 2
 ERR_CONV_NOT_POSSIBLE = 3
 ERR_BAD_OTF = 4
 OTHERS = 5.
IF SY-SUBRC <> 0.
RETURN.
ENDIF.
now use use runtime service method to push the PDF to browser client
CL_WD_RUNTIME_SERVICES=>ATTACH_FILE_TO_RESPONSE

Calling Smartforms from Module pool: Most Urgent

Hi, Exeperts
how can I call smartforms from module pool.
I have done like below.
First Created a push button on screen and used
these code in user command through PAI
FORM CALL_SMARTFORMS .
DATA: V_FORM_NAME TYPE RS38L_FNAM.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    FORMNAME           = 'ZSMART'
IMPORTING
    FM_NAME            = V_FORM_NAME
EXCEPTIONS
    NO_FORM            = 1
    NO_FUNCTION_MODULE = 2
    OTHERS             = 3.
ENDFORM.                    " CALL_SMARTFORMS
now I am getting form name in v_form_name, but it is not executing.
Please help me out.
Regards
Rajiv singh.

Well, as it's most urgent....
One you have a value in V_FORM_NAME you need to call this function module, passing the fields and strucures that make up the interface to your form.
Eg.
DATA: DEVICE TYPE SSFCTRLOP .
DEVICE-DEVICE = 'PRINTER'.
DEVICE-NO_DIALOG = 'X'.
CALL FUNCTION V_FORM_NAME
EXPORTING
   CONTROL_PARAMETERS         = device
   USER_SETTINGS              = 'X'
EXCEPTIONS
   FORMATTING_ERROR           = 1
   INTERNAL_ERROR             = 2
   SEND_ERROR                 = 3
   USER_CANCELED              = 4
   OTHERS                     = 5.
Regards,
Nick

Problem while calling smartform in webdynpro

Hi Experts,
I am calling a smartform in webdynpro abap. It was working fine in development server. I have ported the same request to Quality Server, there it was not working.it is giving sy-subrc = 1 and it is displaying a blank screen
I m following the following steps for calling smartform in webdynrpo.
I am calling the smartform by
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM_NAME'
importing
fm_name = fname
exceptions
no_form = 1
no_function_module = 2
others = 3
if sy-subrc 0.
Error MESSAGE
endif.
call function fname
exporting
control_parameters = lv_control_parameters
output_options = lv_output_options
user_settings = space
pernr = stru_input1-zpernr
reinr = stru_input1-zreinr
pdvrs = stru_input1-zpdvrs
importing
job_output_info = lv_ssf_output
exceptions
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
others = 5
if sy-subrc 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
But it is not passing otfdata and it is returning 1 in sy-subrc.
Please help me to solve this issue.

I m not using any image.
I have checked through debug and the function module is not transfering any file to OTF table.
Please suggest me..
Edited by: zakirriyaz on Nov 4, 2011 9:47 AM

How to Call Same Adaptive RFC across different Backend R/3 Systems

Hi Everyone,
I have been troubled for the last 3 or 4 days on how I should develop Web DynPro code to call the same RFC on different backend R/3 systems. Don't really want to maintain my own Jco connects within a SAP Connector project and I don't really want to import 3 or 4 of the same models. Can someone please inform what is the best approach?
Thanks.

Hi Glen,
There is one other way of doing this which needs a bit of data maintenance.
The webdynpro app will connect to one R/3 backend. In the same R/3 create RFC destinations to all others backends where the RFC's needs to be called. Create a table where u maintain for what value which backend system should be called. Add rfc_dest as an import paramter in all the RFCs in the backend system where the webdynpro app is connected and call those systems using RFC destinations.
For e.g. you have one HR system and multiple FI systems based on Company codes.
Connect your webdynpro app to the HR system. Create a table in the HR system which will contain data like given below
CoCode                        RFC Destination
1000                             RFCDEST1
2000                             RFCDEST1
In the RFC's in HR system add both CoCode and RFC Destination as additional input parameters. From the front end u can pass different values and call the same RFC's from different systems.
Regards
Prakash

Can we call report from rfc.

Hi All,
Can we call report from rfc.
if it is possible please tell me the process.
i know the process to call rfc from report and from rfc.
but i dont know how to call report from rfc FM.
Thank you.

HI
you call report from rfc.
but you have to write the logic for that..
ex: 1st of all you have to create the fm in target system
then you have to call that fm using that rfc
and then you can call the report form the target system.

Calling Smartform in WD application?

Hi,
Is it possible to call Smartform in WD application?
Thanks

Yes it is. Check out the thread [Displaying Smartforms in Webdynpro ABAP |Re: Displaying Smartforms in Webdynpro ABAP; and check the code as Vikrant Trivedi suggested.
Also check the SAP document [How to Display a Smartform as PDF document in Web Dynpro for ABAP|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0de1eb8-0b98-2910-7996-8a3c2fcf6785].
Hope it helps.

Installing CCMS agent fails: calling SALS_MS_GET_LOCAL_MS_INFO via RFC

Hi All,
I'm trying to connect our SolMan development to the CEN. However when registering ccmsr within J2ee admin it gives the following errors.
Does anybody have an idea?
Output for : /usr/sap/DSM/SYS/exe/run/sapccmsr(-j2ee,-v,pf=/usr/sap/DSM/SYS/profile/DSM_DVEBMGS00_ijmdsm01)
CCMS version 20040229, 64 bit, multithreaded, Non-Unicode
compiled at Oct 28 2006 systemid 324 (IBM RS/6000 with AIX)
relno 7000
patch text patch collection 2006/4, OSS note 914721
patchno 83 intno 20050900
running on ijmdsm01 AIX 3 5 00C97C6E4C00
Logfile for : /usr/sap/DSM/SYS/exe/run/sapccmsr(-j2ee,-R,-f,/tmp/csm53771.conf,pf=/usr/sap/DSM/SYS/profile/DSM_DVEBMGS00_ijmdsm01) [Thr 01] Mon Mar 26 13:29:05 2007
INFO: CCMS agent sapccmsr working directory is /usr/sap/ccms/DSM_00/sapccmsr
INFO: CCMS agent sapccmsr config file is /usr/sap/ccms/DSM_00/sapccmsr/csmconf
INFO: Central Monitoring System is . (found in config file)
INFO: additional Central Monitoring System is . (found in config file)
INFO: found ini file /usr/sap/ccms/DSM_00/sapccmsr/sapccmsr.ini.
INFO: Checking Distributed Statistical Records Library dsrlib.o
INFO: checking version an Unicodeness of dsrlib.o
INFO: DSR: Dynamic Library dsrlib.o (version 22) successfully loaded.
INFO: DSR: Dynamic Library dsrlib successfully loaded.
INFO: DSR: Path /usr/sap/ccms/DSM_00/dsr for Distributed Statistical Records.
INFO: CCMS version 20040229, 64 bit, multithreaded, Non-Unicode compiled at Oct 28 2006 systemid 324 (IBM RS/6000 with AIX) relno 7000 patch text patch collection 2006/4, OSS note 914721 patchno 83 intno 20050900 running on ijmdsm01 AIX 3 5 00C97C6E4C00 pid 479452 profile /usr/sap/DSM/SYS/profile/DSM_DVEBMGS00_ijmdsm01
INFO: Attached to Shared Memory Key 73 (size 40000000), no pool used
INFO: Connected to Monitoring Segment segment status WARM_UP segment started at Thu Mar 22 08:58:40 2007 segment version 20040229
INFO: DSM:000:999999 connected to DSM, host ijmdsm01, System Nr. 00, traceflag
INFO: DSM release is 700 , (kernel release 700 )
ERROR: DSM:000:CSMREG calling SALS_MS_GET_LOCAL_MS_INFO via RFC failed, can not get version of DSM. RfcRc = 2, C_CALL_FAILED
INFO: SLM:000:999999 connected to SLM, host rthuas50, System Nr. 10, traceflag
INFO: SLM release is 700 , (kernel release 700 )
INFO: SLM:000:CSMREG connected to SLM, host rthuas50, System Nr. 10, traceflag INFO: SLM release is 700 , (kernel release 700 ), CCMS version 20040229 INFO: RFC logon info for SLM:000:CSMREG can be updated at any time with -R option: sapccmsr -R INFO: Updated saprfc.ini in agent work directory /usr/sap/ccms/DSM_00/sapccmsr
ERROR: Registration failed: Can't get version of DSM. RfcRc = 2, C_CALL_FAILED RFC Error Info for SALS_MS_GET_LOCAL_MS_INFO message: status: EXCEPTION C_CALL_FAILED RAISED intstat: Mon Mar 26 13:29:10 2007 INFO: dsr: dsrlib unloaded.
...closing this logfile...
Registration of CCMS Customizing Destination
Error during registration of CCMS Customizing destination
Source system cannot be set to Unicode

Hi,
Check these notes.
641339 - RZ20: CCMS monitoring context loses client assignment
558608 - Correction: Starting/stopping LDAP Connector via CCMS
827843 - Access Alert Analysis Methods that are Defined Locally
Feel free to revert back.
--Ragu

How to avoid Priner prompt while calling smartform

Hi All,
I am calling smartform FM from my program. I am passing following settings in Output-Options and Control-Parameters:
wa_outputoptions-tddest = 'LP01'. "Printer name
wa_outputoptions-tdnewid = 'X'. "New request
wa_controlpara-device = 'PRINTER'. "Device
wa_controlpara-no_dialog = 'X'. "No dialog
Even after these settings I am getting prompt which asks printer name and other details.
Please tell me how I can avoid the prompt which asks printer name and other settings such as new spool request and print immediately.
Thanks in Advance.
Regards,
Vijay

hi,
try this....
DATA : control TYPE ssfctrlop.
control-no_dialog = ''.
control-preview = ''.
control-no_open = 'X'.
control-no_close = 'X'.
CALL FUNCTION 'SSF_OPEN'
EXPORTING
ARCHIVE_PARAMETERS =
USER_SETTINGS = 'X'
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJ =
OUTPUT_OPTIONS =
control_parameters = control
IMPORTING
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Call SmartForm in RFC

Similar Messages

Maybe you are looking for