Boot Camp Version 1.3b expired.. need to update but don't have windows.

So let me run you through what I did so far.
I got a version of Boot Camp 1.3 beta. I successfully installed it and began to go through the steps to set up windows. I skipped the burning the windows CD option and went straight to the partitioning. I created a 20gig partition named "Bootcamp."
I then realized I needed to burn the windows CD from Boot Camp in order to install it. So I quit the Boot Camp Assistant Application. The option to burn the windows CD was no longer available so I scrapped the Boot Camp Assistant, re-downloaded the 1.3 beta version and installed it.
Still no opportunity to burn the windows drivers CD disc. So I quit the assistant once again. I attempted to re-open the Boot Camp Assistant and I got an error message telling me it expired. So I set the date back on my clock to a date before the beta version expired (prior to Sept. 30, 2007).
Then, I got this error message:
This version of Boot Camp Assistant is not supported in Mac OS X v10.5. Use Boot Camp Assistant 2.0, located in /Applications/Utilities/.
And that's where I am right now. I still have to have the date set back to before Sept. 30th, 2007 to get to the error message above or else it tells me the version is expired.
So I've determined that I need to update Boot Camp to version 2.0 or higher, except I don't have windows installed on my computer yet. The mac support page tells me that I have to open windows and then install the updates to the latest version of boot camp... which I obviously can't do because I haven't installed windows yet.
So I'm stuck with a partitioned drive and I cannot use the Boot Camp Assistant. I need the assistant to burn the windows install CD that I need..
I'm in quite a pickle. Any help would be appreciated.. thank you.
If you need more information let me know I'll try provide the information needed to fix this issue.
Thank you.

I don't have the Leopard disc because a man updated it for me in the mac store when I brought my laptop in for repairs.
You need to get that disk to use Boot Camp. Mac OS X 10.4 disks don't contain the drivers.
So, I have this Mac OSX install disc.. do I just insert it? And then what? How do I go about installing windows after that? I'm a little confused about how to get to the drivers and what to do I'm just not sure.
Once you've partitioned the drive and installed Windows, start up the computer into Windows and insert the disk. The installer should automatically start.
(44923)

Similar Messages

  • I have the old Mobile Me calendar, on OS 10.5.8.  Need to upgrade but don't have OS 10.6. What do I do?

    I have the old Mobile Me calendar on OS 10.5.8.  Need to upgrade calendar but don't have OS 10.6.  What do I do?

    Get Snow Leopard 10.6 if you have an intel Mac (you don't post any hardware info).

  • Need itunes 10 but don't have system requirements

    I have a MacBook Pro v10.4.11 and I just bought an iPhone 4. I need itunes 10 but it requires Mac 10.5. I tried checking for software updates but nothing. Can anyone tell me how to sync my phone?

    You will have to upgrade to Leopard 10.5 at least. With a MacBook Pro you could possibly go as far as the most recent OSX version, 10.7 Lion.  Alternatively you could go for 10.6 Snow Leopard.  Which versions you can run depend upon your computer's specifications.
    These aren't free downloads. For Lion check the main Apple page since this is what they currently sell in the store. Snow Leopard is probably still available through Apple Sales, and even Leopard might just happen to be.  If your MBP supports it I'd go for Snow Leopard at least since it is still being supported by Apple and would be much cheaper than Leopard (note, because you are running Tiger they will strongly urge you to buy the more expensive box set, but unless you feel you want to update your other software most people just go with the basic $29 SL upgrade).

  • GTX 470 Twin Frozr II fan bearing failing, need to RMA but don't have receipt

    Hi all, I live in the UK and one of the fans in my GTX470 TFII has started to make an annoying grinding sound which comes and goes. Seems like a dodgy bearing, apparently this is common with Twin Frozr cards. Can't seem to find a replacement fan online anywhere (model is Power Logic PLD08010S12HH I think).
    Anyway so it looks like I have to RMA the card. However apparently the RMA has to be done through the reseller as I'm in the UK. This is a problem as I bought this over a year ago and don't have any receipt for it, I can't even remember where I bought it from. How would I go about RMAing this card?

    over a year probably means re-teller warranty is expired so it would need to go to straight to msi.
    the shop you got it from would have your details just give them name address - last 4 digits of credit card and they'll be able to find you.
    support.msi.com
    or similar to start an MSI RMA
    it will take time so hope you have a card to use in the mean time. I had to go back to integrated when I did my RMA. - not even able to full screen youtube.

  • I have a new HD installed and bought a new mac os x 10.6 don't have the admin password, after booting and pressing alt key a padlock shows up but don't have a password. what can i do

    i just got a macbook pro harddrive wasn't good so got a new one in and bought mac os x 10.6 to install.
    unfortunately after inserted the disc in the drive, and press the alt key, a padlock shows up requiring a password but a don't have the password. there is nothing on the harddrive running. is there anything you can help me with. thank you.
    caboampong

    caboampong wrote:
    bought mac os x 10.6 to install.unfortunately after inserted the disc in the drive,.....
    I'm confused
    I took this to mean that your DID have an install disk.
    By holding down the "C" key, you are booting to the install CD.
    Alternatively, you can hold down the "option" key, to select which drive to which you want to boot.

  • Need to UPDATE but don't want to lose rankings, last played, playlists, etc

    I need to download the new version of iTunes for some reason, in order to buy an ipod and even to download certain songs in the itunes store. This is very annoying.
    In the past, when I've updated my itunes to a new version, I've lost the song rankings, playlists, last played info, etc for over 5,000 songs/videos. It was EXTREMELY annoying. I don't want to lose this info again when/if I update my itunes.
    I now have over 10,000 songs on an external hard drive, along with the itunes folder/etc. I am using Windows XP. Can anyone here, anyone at all, tell me how I can update to the new version of iTunes without losing this info?
    I will not update if I can't be guaranteed that this will work. I do NOT want to lose all this info again.
    Thank you! Kevin

    I have an ipod 30gb then i bought a shuffle just because i wanted one. I had to also update my itunes software for that and it kept everything in there perfect. Ive had to update my software many many times actually and nothing ever was deleted.. The only time something was actually deleted was when i didnt update it when it told me to. Id say youd be safe to update it. If you are really worried about it you can back up your music first!!

  • My Ipod needs hardware repair, but don't have proof-of-purchase

    Hi guys, I'm new over here. I don't know if I'm even posting in the right place, or if these forums are here for this kinds of questions. Sorry If I'm using them the wrong way...
    The thing is that I'm having some troubles with my Ipod Touch. I first realized that there was something wrong with it when I tried plugging to a car adapter. It kind of sounded over the radio, but with very low volume, lots of noise, and without announcing that it was charging.
    Then, I went to my computer, plugged it in, and notice that it wasn't getting any charge neither, nor wasn't being recognized by Itunes nor the typical USB discovery. Then I went to my nearest Apple Store and the guy told me that he needed a proof-of-purchase receipt to validate the warranty and repair the Ipod, and that if I didn't have one, I'd have to pay for the repair, and that for what it looks, I'm better off buying a new Ipod.
    The thing is that my mom bought my Ipod last November, in the Lenox Square Apple Store in Atlanta, and she then came to Venezuela and lost the receipt (maybe she forgot she needed it, or nobody told her about the warranty so she threw it away).
    My question is this basically: what can I do? I've thought of contacting the Lenox Square Store (preferable via email) to explain them what happened, so that maybe they could help me get something that would work as a proof-of-purchase, but there're no email addresses easily visible and I don't wanna waste a Long distance call just to get bummed out.
    What do you guys suggest?
    Thanks in advance, I'll appreciate every kind of help you could give; even if it's just "Dude, you're screwed."

    I did! And according to the link you gave, it says that my Ipod is Registered, Expired for Telephone Technical Support, and Active for Repairs and Service Coverage, with an estimated expiration date of November 26, 2010, which seems about right--that's the week my mom came back from her trip!
    So I'm a little bit more hopeful now, but still a little worrisome: the guy at the Apple Store checked the Serial Number using the bar code beneath the Ipod Box and said, "I need proof-of-purchase 'cause according to the system, this Ipod left a Store on May 2009, so it's ALMOST out of warranty, and Apple will require them that I give them a copy of the receipt."
    Still. I'm thinking of printing that screenshot and showing it to him.
    Thanks a lot luvlabs!

  • Need to update but don't know how

    I have the creative cloud app and its says photoshop and illustrator are up to date. Photoshop 14.1.1 and illustrator 17.0, however i have a workshop next week and i'm told i need photoshop 14.2 and illustrator 17.1.  i tried inside the photoshop app under help but update is greyed out.  What up?

    http://forums.adobe.com/community/download_install_setup/creative_cloud_faq may help

  • Bought New Macbook Pro and Lightroom 5 in store -Need to install but don't have a CD/DVD drive

    Just got home from purchasing a new Macbook Pro and Lightroom 5.  Problem is I do not have a CD/DVD drive.  Just opened my Lightroom 5 to install and I'm clueless how to install it on my new laptop UGH! What can I do?  Is it possible to install my new Lightroom 5 without a CD/DVD drive? 

    install lr 5.5,
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Boot Camp Version 3.0

    Have Boot Camp Version 2.2 and need to updated to Boot Camp Version 3.0 in order to update to Boot Camp Version 3.0 so that I can finally install 3/1.1.3 32 bit.exe.
    All this is for Windows 7. Been searching the Apple Support pages with no success. Does anybody have the link for Boot Camp Version 3.0_

    Insert the Mac OS X 10.6 DVD or your computer's original disks when booted into Windows.
    (52856)

  • TS1702 Hi I need to up date my iPhone 4 but don't have access to a computer & my phone docent have it's own system up date in the settings is there any other way to update the software

    Hi I have an iPhone 4 & need to software update but don't have access to a computer & my phone dosent have it own system up date is there any other way of updating it

    The first time to iOS 5 must be done with iTunes on computer.

  • HT3986 Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64, however when i insert my OS CD to install the drivers using the boot camp method, it says unsupported to this computer model

    Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64 bits but however when i tried to install the drivers using the OSX MAC CD using boot camp, it prompt me boot camp x 64 is unsupported with this computer model. Then i tried the method by right click the bootcamp x64 and managed to install the drivers. However, i still couldnt manage access the internet and it prompts me no networking hardware detected...Any idea how can i solve it?
    P.S i tried updating my bootcamp version 3.0.4 in mac os with bootcamp x64 version 3.1 exe but it shows me weird wording..
    my bootcamp version in windows 7 is 2.1..

    Uninstall 2.x totally
    Use CCleaner Registry tool
    Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
    BC 2.2 was XP and Vista only

  • How do I tell the installed Boot Camp version (Windows 7, 32-bit)?

    I installed Windows 7 (32-bit) in a new Boot Camp partition. I see that there are several Boot Camp version updates for 32-bit Win 7 (3.2 from 3.1, etc.). Previously I had Windows XP, and in the system tray at lower right of the screen there was an icon for information about Boot Camp. My Win 7 installation has no such icon. How do I tell which Boot Camp version I am running?
    Likewise, Win XP had an Apple utility for setting the startup disk. The only Apple utility I find in Win 7 is Apple Software Update (which shows no updates needed).
    What am I missing?

    Answered my own question! When I installed Win 7, I failed to install the Boot Camp drivers on the OS X install disk. Did so, and now the Boot Camp icon shows up.

  • IMac running Windows 7.  No trace of Boot Camp to be found.  Need Control Panel

    I am currently using an iMac which boots directly into Windows 7.  I didn't set it up, but back when it had XP, the Boot Camp Control Panel was visble in the taskbar.  Now, in Windows 7, there is no trace of Boot Camp anywhere.  Nothing in the Windows Control Panel, the taskbar, programs, etc.
    I need the Boot Camp Control Panel to adjust the brightness of the display to use a monitor calibrator.  The NVIDIA properties has brightness control, but that just mixes grey in to make it "look" brighter without changing the light intensity, the true brightness.
    I do not have access to any boot camp disks or OSX/Windows disks, so my options are limited for troubleshooting.
    Any advice would be greatly apreciated.

    I'm a lousy guesser so you'll have tell us the model/year/OS version of the computer you have.
    Can you ask the one who set it up for you?
    Do you have an Apple Softrware Updater in Windows?
    Unless you have the updater or the control panel there's no way to tell which version if any you have. You can try down loading the different Boot Camp files and see if any work. BUT, they are large files and you have to install them in sequence (depending on which version you have now), 3.1 then 3.2 then 3.3, etc, AND you have to have 3.0 in order to install any of them and it only comes on the 10.6 MacOS installer disk.
    Look in the Programs and Features control panel and see if you see any Apple files. Without the 10.6 Disk your out of luck.

  • When there will be a new boot camp version with Windows 8.1 support? I a floor of year can't already update Windows 8 on the iMac! ! !

    When there will be a new boot camp version with Windows 8.1 support? I a floor of year can't already update Windows 8 on the iMac! ! !

    Welcome to Apple Support Communities
    Boot Camp Support Software 5.0.5033 supports Windows 8.1 and can be used with that version. The Mid 2011 iMac is compatible with Windows 8, so you should not have any problem by installing Windows 8.
    Follow Apple's steps > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

Maybe you are looking for

  • Server 2008 R2 Essentials The review of license compliance is incomplete

    Hello We have a 2008 R2 Foundation Server for on of our customer, the server is the one and only in the network, the AD is working fine and DNS and DHCP also, but we get this error message The server did not finish checking the license compliance. in

  • Analytic View with tables from different schema

    Hi, I'm curious if I make something wrong or if this is not possible: I want to use two tables each in a different schema. I can drop them into the DataFoundation, can connect them, assign them some measure. But activation fails due to insufficient p

  • Mac mini only sometimes displays

    i have a 2014 mac mini, intel iris graphics, 16 gb of ram and a 3.0 GHz i7 processor. a lot of the time my mac mini will display fine with no issues. but sometimes i turn it on and it just says no signal indefinitely, and i have to turn it off and on

  • Need Help Configuring Hyper-V Brokers

    I have seen many articles stating that a Hyper-V broker is necessary for failover replicas. Just little on how to do this. I have a 5 node cluster on the Primary side and a 3 node cluster on the DR side both with EqualLogic Sans.  I have created the

  • Index is not using for this query

    I have this query and it doesn't use index. Can you put your suggestion please? SELECT /*+ ORDERED USE_HASH(IC_GSMRELATION) USE_HASH(IC_UTRANCELL) USE_HASH(IC_SECTOR) USE_HASH(bt) */ /* cp */ bt.value value, bt.tstamp tstamp, ic_GsmRelation.instance_