Call to WPG_SESSION API Failed. Error-Code:20001

Here is the error I am getting while accessing portal. This error comes 2 out of 5 times.:
Call to WPG_SESSION API Failed.
Error-Code:20001
Error TimeStamp:Fri, 23 Mar 2001 17:28:33 GMT
Database Log In Failed
TNS is unable to connect to destination. Invalid TNS address supplied or destination is not listening. This error can also occur because of underlying network transport problems.
Verify that the TNS name in the connectstring entry of the DAD for this URL is valid and the database listener is running.

The error code implies an invalid cookie. This could be because the encryption key is invalid or the format of the cookie is corrupted. If the encryption key was invalid, the error would happen all of the time rather than 2 times out of 5. The only way I can see that the cookie format would be bad is if it got truncated. There is a 4K limit on the size of the buffer that passes cookies around, so it could be that the browser is sending more than 4k worth of cookies. However, if this were the case, then the error would be consistent from that browser after you exceeded the limit. Can you give a little more detail on exactly what you are doing when the error occurs?

Similar Messages

URGENT:upgrade to 3.0.8 issue Call to WPG_SESSION API Failed.Error-Code:6550

I ran upgrade scripts to 3.0.8 from 3.0.6 and completed with no errors.
csh diag.csh reports no errors.
sqlplus to connect string works fine
DAD connect string is correct.
err text:
Call to WPG_SESSION API Failed.
Error-Code:6550
Error TimeStamp:Tue, 5 Jun 2001 03:36:50 GMT
Database Log In Failed
TNS is unable to connect to destination. Invalid TNS address supplied or destination is not listening. This error can also occur because of underlying network transport problems.
Verify that the TNS name in the connectstring entry of the DAD for this URL is valid and the database listener is running.
DIAG.CSH output
oracle(dba)@ws12:/export/home/upgrade:$csh diag.csh -s portal30 -p portal30 ->
Begining Portal Diagnostics
...portal_schema: portal30
...portal_password: *************
...connect_string: iforce
Loading java class for Portal Diagnostics ...SQL*Plus: Release 8.1.6.0.0 - Production on Mon Jun 4 20:48:59 2001
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Connected to:
Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
SQL> SQL> Creating Table 'wwsec_diagnostic$'
Creating Sequence 'wwsec_diagnostic_seq'
Diagnostics Report v 1.0: Oracle Portal v 3.0.8.9.8
As of 04-Jun-2001 20:49:02 Schema Name: PORTAL30 SSO Schema Name: portal30_sso
PORTAL30.wwsec_enabler_config_info$
Login Server URL : http://ws12.sempi.eng.sun.com:7777/pls/portal30_sso/portal30_sso.wwsso_app_admin.ls_login
DAD : portal30_sso
Host connection : successful.
mod_plsql : working.
JServ : working.
Schema name : portal30_sso
Connect string : iforce
Authentication mode : Single Sign-On
portal30_sso.wwsec_enabler_config_info$
Login Server URL : http://ws12.sempi.eng.sun.com:7777/pls/portal30_sso/portal30_sso.wwsso_app_admin.ls_login
DAD : portal30_sso
Host connection : successful.
mod_plsql : working.
JServ : working.
Schema name : portal30_sso
Connect string : iforce
Authentication mode : Single Sign-On
Partner Application Information
**** Oracle Portal (portal30) ****
Home URL : http://ws12.sempi.eng.sun.com:7777/pls/portal30/portal30.home
Success URL : http://ws12.sempi.eng.sun.com:7777/pls/portal30/portal30.wwsec_app_priv.process_signon
DAD : portal30
Host connection : successful.
mod_plsql : working.
JServ : working.
Schema name : portal30
Connect string : iforce
Authentication mode : Single Sign-On
**** The Login Server (portal30_sso) ****
Home URL : http://ws12.sempi.eng.sun.com:7777/pls/portal30_sso/portal30_sso.home
Success URL : http://ws12.sempi.eng.sun.com:7777/pls/portal30_sso/portal30_sso.wwsso_home.process_signon
DAD : portal30_sso
Host connection : successful.
mod_plsql : working.
JServ : working.
Schema name : portal30_sso
Connect string : iforce
Authentication mode : Single Sign-On
Diagnostics completed successfully!
Disconnected from Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
null

Venu
Have you also upgraded your 9iAS instance to 1.0.2.2? The WPG_SESSION API error commonly appears when you are not using the lastest version of mod_plsql contained in 1.0.2.2.
See: Migration Guide for Oracle9iAS Solaris or NT/2000.

Call to WPG_SESSION API Failed. Error-Code:6550

Can someone please help me figure out what I may be doing wrong? Using recent downloaded versions of 8i and 9iAS I cannot access Portal30 using IE5 browser. Please see error below. During portal configuration I specified connect string of oracle:1521:dba1. The connectstring entry of the DAD is dba1. I ran ssodatan. The database is open, listener is listening and SQL*Plus, DBA Studio, Net8 Assistant all connect to dba1 fine. Discussions mention cookies, upgrades, etc., but nothing definitive. Troubleshooting Guide does not reference error 6550. I am at a loss. Any suggestions would be appreciated.
I downloaded and installed 8.1.7 on NT host oracle then downloaded and installed 9iAS on another NT host. Portal Diagnostics are successful, however I get database login failed when attempting to use IE5 browser to access portal at http://oracle/pls/portal30/PORTAL30.home
Here's the diags:
D:\ora9ias\portal30\admin\plsql>set ORACLE_HOME=d:\ora9ias
D:\ora9ias\portal30\admin\plsql>diag -s portal30 -c dba1
Begining Portal Diagnostics
...portal_schema: portal30
...portal_password: *************
...portal_connect_string: dba1
Loading java class for Portal Diagnostics ...
SQL*Plus: Release 8.1.7.0.0 - Production on Wed Jul 25 08:41:58 2001
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
Creating Table 'wwsec_diagnostic$'
Creating Sequence 'wwsec_diagnostic_seq'
Diagnostics Report v 1.01: Oracle Portal v 3.0.9.8.0
As of 25-Jul-2001 08:42:17 Schema Name: PORTAL30 SSO Schema Name: portal30
_sso
Proxy Server Settings:
HTTP Server:
HTTP Server Port:
No Proxy Servers for Domains beginning with:
URL Connection Time-Out (seconds):
PORTAL30.wwsec_enabler_config_info$
Login Server URL : http://oracle/pls/portal30_sso/portal30_sso.wwsso_app_admi
n.ls_login
DAD : portal30_sso
Host connection : successful.
mod_plsql : working.
JServ : working.
Schema name : portal30_sso
Connect string : dba1
Authentication mode : Single Sign-On
Partner Application Information
**** The Login Server (portal30_sso) ****
Home URL : http://oracle/pls/portal30_sso/portal30_sso.home
Success URL : http://oracle/pls/portal30_sso/portal30_sso.wwsso_home.pro
cess_signon
DAD : portal30_sso
Host connection : successful.
mod_plsql : working.
JServ : working.
Schema name : portal30_sso
Connect string : dba1
Authentication mode : Single Sign-On
**** Oracle Portal (portal30) ****
Home URL : http://oracle/pls/portal30/portal30.home
Success URL : http://oracle/pls/portal30/portal30.wwsec_app_priv.process
_signon
DAD : portal30
Host connection : successful.
mod_plsql : working.
JServ : working.
Schema name : portal30
Connect string : dba1
Authentication mode : Single Sign-On
**** The Login Server (portal30_sso) ****
Home URL : http://oracle/pls/portal30_sso/portal30_sso.home
Success URL : http://oracle/pls/portal30_sso/portal30_sso.wwsso_home.pro
cess_signon
DAD : portal30_sso
Host connection : successful.
mod_plsql : working.
JServ : working.
Schema name : portal30_sso
Connect string : dba1
Authentication mode : Single Sign-On
Diagnostics completed successfully!
Disconnected from Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
D:\ora9ias\portal30\ admin\plsql>
Call to WPG_SESSION API Failed.
Error-Code:6550
Error TimeStamp:Wed, 25 Jul 2001 12:33:52 GMT
Database Log In Failed
TNS is unable to connect to destination. Invalid TNS address supplied or destination is not listening. This error can also occur because of underlying network transport problems.
Verify that the TNS name in the connectstring entry of the DAD for this URL is valid and the database listener is running.
null

I met that error several times. Check TNS connection from web server box to database server, if applicable. - use tnsping.
That's the only cause that produces the error. If the web server box has more than one Oracle Home, find the correct one. Check $iAS_home/Apache/bin/apachectl script which will tell you its oracle home directory. It may not use $TNS_ADMIN/tnsnames.ora, but $ORACLE_HOME/network/admin/tnsnames.ora.

Call to WPG_SESSION API Failed. Error-Code:20000

Hi,
to be short:
Oracle: 8.1.7.0.0
When trying to login to the portal application I got this error [bottom of message]
I downloaded the diag tool and run it against my configuration, everything was reported OK.
I've also searched all through this forum and have read similar problem, but nobody had error code 20000.
Would you please guide me?
Call to WPG_SESSION API Failed.
Error-Code:20000
Error TimeStamp:Thu, 29 Mar 2001 16:41:15 GMT
Database Log In Failed
TNS is unable to connect to destination. Invalid TNS address supplied or destination is not listening. This error can also occur because of underlying network transport problems.
null

Reza,
Is this a new install?
If so, on a new install, you often need to create an entry in the tnsnames.ora file within the Oracle9iAS $ORACLE_HOME. You can do this simply by copying the information from your tnsnames.ora in your Oracle 8.1.7 $ORACLE_HOME/network/admin.
A lot of times, it could also be a difference of Portal trying to connect to the database with:
ORA817.company.com
instead of
ORA817
or vice versa.
Check http://myhost.mydomain.com/pls/admin_/gateway.htm
In each DAD, it will specify the connect string that Portal is trying to use to connect with. Make sure your tnsnames.ora is using the same.
If this is not a new install, you may have just had a problem with the database. If this is not production, rather than debugging the problem connecting to the database. I have found that restarting the database and webserver usually works, that will at least get you back up and running. Then you can check the alert.log in the database for any problems or issues such as too many sessions, etc.
Thanks,
Sue

Call to WPG_SESSION API fails with ORA-28231

Hello,
9ias 1.0.2.2.1 on SusSE 7.2 with 9.0.1 server.
When executing http://<server>:<port>/pls/portal30/portal30.home apache logs the error:
[warn] mod_plsql:Stale connection due to Oracle error 28231
[error] mod_plsql: /pls/portal30/portal30.home HTTP-503 ORA-28231 <B> Call to WPG_SESSION API failed.</B>
What is it that I can check here?
Note:173529.1 says:
Error: ORA-28231 (ORA-28231)
Text: no data passed to obfuscation toolkit
Cause: A NULL value was passed to a function or procedure.
Action: Make sure that the data passed is not empty.
Any pointers are greatly appreciated.
Anatoliy

At what point do you see this error?
e.g., On initial page request, or after login, etc.
Is there any more information in the error_log?
It looks like there's no data in the cookie when trying to decrypt it.

Call to WPG_SESSION API Failed.

I cannot access the portal from the home page (or any page) I cannot even get into the DAD configuration. I have never seen the new version of portal as it killed my old version on upgrade and I cannot seem to install the new one right. I have followed the install instructions to the T and still cannot get this software to run.
I am getting really fed up with oracle portal.
This is a fresh install of 9iAS 1.0.2.1 on windows 2000 I am running 8.1.7.
Does anyone know what is going on and how to resolve this error?

Can you tell me where the problem was for you? I am getting wpg_session api failed error 6550. I installed 8.1.7 on one host and 9iAS on another. Diag.exe succeeds. Dads seem to be ok. I can connect to the database using SQL*plus. I just can't get a portal web page.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Chopsaki:
bill,
I finally figured out where the problem. As I said I already followed these instructions down to the 'T'. Anyway while you are here... I had a question about uploading images and inserting them into a table as blobs. Does portal support this (without custom dev)? I saw that you had responded to someone about this already, but the document you mentioned was a dead link.
Thanks for responding and thanks in advance.<HR></BLOCKQUOTE>
null

ORA-6550: CALL TO WPG_SESSION API FAILED.

Oracle Portal Release 2.
1) Logged into the Portal using orcladmin.
2) Created new schema called CMMS (had to use DEFAULT profile, ODSPSWDPROFILE would not allow schema to be created).
3) Created new user called CMMS through the ADMINISTER tab of portal design page.
4) Create new DAD called cmms_portal using Oracle Enterprise Manager on port 1810. Entered username CMMS, the password and the connection string.
5) Restarted HTTP server.
DOES NOT WORK!!!
Verified that the user CMMS is entered into the Oracle Internet Directory. Can log into CMMS through single sign-on.
Can log into CMMS schema using SQL*PLUS.
Reset user profile from DEFAULT to ODSPSWDPROFILE.
Verified connection string to that of orasso and portal in the $ORACLE_HOME/Apache/modplsql/conf/dads.conf file was the same
STILL DOES NOT WORK
Shutdown the mid-tier and the infrastructure and rebooted the server
STILL DIDN'T WORK
Able to connect to via SqlPlus.

Scott,
Thanks for your reply. I double check instruction and re-done all steps. I try to start demo application (I didn't even go further tneh step 4 in Install.txt!)
from ...\ssosdk307_032101\demo\plsql\Readme.txt 5. To verify the web server setup, go to the following URL to see the test page:
http://<hostname>:<port>/pls/<dad_name>/<schema_name>.test_setup
, but I receive the same error messages in IE and in Apache error_logs.
I see at this point one weak area - this is DAD. As I understand I need to create dad in dads.conf, am I right?
Maybe I didn't created it right?
Could you post some working dad for SingleSignOn?
Thanks,
Sergiy

Lenovo 3000 N100 Network issue / Wireless Stack initialization failed, error code 117

Hi,
Lenovo 3000 N1000 with 1GB Ram, Win XP SP2, purchased in May 2006. WLAN network with WPA-PSK key worked without any issues so far and is still accessible with PC.
After transferring music via from my notebook to my mobile Bluetooth all network adapters seem to be disconnected. Neither Access Connections (AC) nor Windows can find any wireless network. Also if I try to configure any LAN, WLAN with Windows I get the message that all network adapters have been removed. However I cannot spot any issue in the device manager as all parts are shown to be working OK.
This is what I've done so far:
1) Checked Radio switch ---> on
2) FN +F5 --> connection on
3) Uninstalled AC, downloaded and installed most actual version (5.00 Build 7VCX32WW)
4) Installed new version for wireless driver for Intel(R) PRO/Wireless 3945ABG (version 12.0.0.82)
Still, even if I uninstall AC to check if WLAN is working at all, Windows gives the error message that all network components have been removed.
Diagnose Tool gives the following output:
"Wireless Stack initialization failed, error code 117"
Logfile:
Description : Intel(R) PRO/Wireless 3945ABG Network Connection
Type : Wireless LAN Adapter
DriverVersion : 10. 5. 1. 59 ----> why is the old driver version??????????
PNPID : PCI\VEN_8086&DEV_4227&SUBSYS_10118086
SupplicantVersion : AEGIS Protocol (IEEE 802.1x) v3.5.3.0
ERROR AcSvc( SYSTEM(Prvlg).1108.4580) [9/3]11:04:15:703 CAcGolan::GetRadioStateInDriver: Golan API GetRadioState() missing!
Hope this is enough information for anyone of you in order to suggest any solution. As I could see from previous threads some of you experienced similar problems in the past and could fix them somehow. However I couldn't find anyone with exactly the same problem.
Thanks much in advance for any advice you might have.
Flo

Hi
I have this problem also with my Lenovo 3000 V200.
Sometimes when I boot up the PC it will connect to the network and everything works just fine.
At other times, after boot, the "wireless stack initialization failed, error code: 118" problem occurs
and the only way to solve it seems to be a PC restart. Nothing else I do will bring the network up.
If I study the Networking tab in Task Manager it indicates that no adapters are available (wired eth.
access also fails). At a few occations connectivity have failed alltogether (i.e. a reboot have not solved
the problem). Last time this occured I had to reinstall the complete system (from a previous backup)
to get networking up.
I have tried different versions of Access Connections (5.02, 5.12, 5.21) and the same problem occurs
at seemingly random instances in time. This is obviosly a problem with the Access Connections software
since the Wireless networking works fine when I let windows manage it...
Anyone with a fix?
/Fredrik

QuickTime Install Failed Error Code -3 - At Wits End Ready to Return IPOD

I have been trying to install QuickTime with Windows XP for the past 8 hours. First, I receive the message Install Failed Error Code -3. Then I uninstall software and download and get Error 1722 and the Error 1603 Fatal Error. I'm in a vicious loop of installing/uninstalling. Called Apple technical support and they walked me through the same steps I've been going through all day and I still have the same results. I'm ready to return my daugheter's iPod. I have looked at all the technical help available and have completed every recommended solution with no success. What am I missing? Suicidal in Chocolatetown, USA.

switch off antivirus and antispyware applications
Download Quicktime 7.0.3 Standalone Installer
http://www.apple.com/quicktime/download/standalone.html
Run the install from your hard drive, not over the internet
That should fix you up.

BT Vision - HDD Access failed: error code VDR370 ?...

For weeks this box as been playing up, rebooting it self for now reason, this i can take. Almost 2 weeks ago, woke up for work, turn the TV on and was presented with this: Grey blueish screen: Top left corner "Starting" - Bottom right corner - "BT Vision" - and the bottom middle this "HDD Access Failed: error code VDR370" Now to me this looks like an Hard Drive failure. Called the Tech Help, the guy said I must be mistaken, that cannot be the code, I said yes. After spelling out to this idiot that I have gone through the steps on this web site (4 to be precise), it is not working. i asked can you find out what this means, he said he doesn't know. I asked to speak to someone who can tell me what this means, nop, all he can do is send out an engineer which will take at least a week for them to arrive, then to make matters worse, if the problem is user error I will be billed £125.95 WT*.
I explained I am an IT engineer, and since no one there can tell me what this error is, I am confident that this error is Hard drive problem, as it is clicking also. So my question is: What does this error mean " HDD ACCESS FAILED: ERROR CODE VDR370" SIMPLE.

Hi bazk123,
Thanks for posting. It does sound like this is a drive failure. Is the box making any clicking or whirring sounds? If so it does require an engineer visit to check the box and replace if necessary. I can look into this for you if you wish. Just drop me an email with the details. You'll get the "contact us" form in the about me section of my profile.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?

Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?

Try the troubleshooting for that error code on this page : iTunes: Advanced iTunes Store troubleshooting - Apple Support (search for '8003' on the page, it's just below half-way down)

DVD Burn fails (Error code 0x80020022), newish drive, just applied updates

Hello,
when i try to burn a data dvd with a variety of files from finder on my power mac g5 it thinks a while and then fails with the message:
Burning the disc failed because communication to the disc drive failed (Error code 0x80020022)
I just downloaded the latest OS updates last night.
Disc utility showed permissions problems in some files on my boot drive including in a darwin folder but they repaired fine.
Two weeks ago apple replaced my superdrive and i hadn't tried burning a dvd since then, but cds did and do burn fine.
This computer is under warrantee but in case the latest software updates caused this, or if someone has an easy fix that would allow me to save the trip to the store for analysis and potential couple day wait...
i'm all ears!
Thanks, Will
Software overview
System Version: Mac OS X Server 10.4.8 (8L127)
Kernel Version: Darwin 8.8.0
SONY DVD RW DW-U21A:
Firmware Revision: AADB
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
hardware
Machine Name: Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (2.2)
Number Of CPUs: 2
CPU Speed: 2 GHz
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 1 GHz
Boot ROM Version: 5.1.8f7
Machine Name: Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (2.2)
Number Of CPUs: 2
CPU Speed: 2 GHz
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 1 GHz
Boot ROM Version: 5.1.8f7
Power Mac G5 Mac OS X (10.4.8)

Thank you for your help!
At one point in the last few days i did run out of disk space on one drive, but i think i had 5Gig free on the short drive when i was trying it earlier, and i have upped that to 30.
My spindled HP DV-16Xs worked on the drive i had before pretty darn well.. I've tried a bunch of unlabeled ones, i've also tried burning at 1x, and i went out and bought some jewel cased verbatim dvd-r 16Xs, same problem.
I will take one more shot at finding the best media using that website, get some 8Xs if i can find them, before hauling it into apple.
without the dvd burner it's hard to backup very well, I was planning to get a external hard drive next month.

My reinstallation of itunes is failed, error code is error 7 (windows error 126) the system find not msvcr80.dll script

my reinstallation of itunes is failed, error code is error 7 (windows error 126) the system find not msvcr80.dll script

https://discussions.apple.com/thread/5817040?tstart=0
....try everything in that thread, should fix the issue.

OBIA 7.9.5 "Financial Analytics" GL/AR Fact load fails "error code 36331"

Hi all ,
For Financial analytics7.9.5 below fact load getting failed "error code 36331".
'SIL_GLOtherFact_Full' has failed.
'SIL_GLCOGSFact_Full' has failed.
'SIL_GLRevenueFact_Full' has failed.
'SIL_ARTransactionFact_Full' has failed.
Let us know how to fix this up.
Should i need to follow the comments posted in this link
Re: Help !!! Re: Fianacial Analytics failed with Error Code = 36331
thanks
saran

ORA-12520: TNS:listener could not find available handler for requested type of serverI've not seen this error myself, but looking on Google it appears to be an unsolved problem on OBIA.
Since it's intermittent then it rules out obvious things like the Oracle database being down or the connectivity being incorrectly configured.
Looking on My Oracle Support (metalink) I found discussion of the error with reference to a completely different product but around the issue of parallelism.
If I had to guess I'd say that the keyword in the error is available - the oracle DB is being swamped with more requests that its configured to handle.
My suggestion would be speak to your DBAs and ask them to monitor the number of sessions on Oracle DB whilst your ETL is running and watch for any limit being breached. If possible up that limit, or reduce the amount of ETL tasks running in parallel.
I'd also suggest raising an SR with Oracle since it's evidently a not-uncommon problem.

Backup failed error code o8x100037

any ideas?

Hi,
>>Backup Failed Error Code 2155348129 Volume Shadow Copy Service error:
As the following article suggests, this error can be caused by the incorrect Active volume.
Troubleshooting VSS Writer Failure
http://social.technet.microsoft.com/wiki/contents/articles/1261.troubleshooting-vss-writer-failure.aspx
If the issue persists, we can follow the article below to re-register the dlls that are needed by the VSS service to see if it helps.
Volume Shadow Copy Service and DLLs
http://blogs.technet.com/b/sdoakes/archive/2006/02/03/418722.aspx
In addition, the following thread focused on the similar issue and can be referred to as reference.
Failed Full System Backup Error: 2155348129
https://social.technet.microsoft.com/Forums/windowsserver/en-US/7eaba8d9-2fc8-41fd-a2ef-18a8d8b9186e/failed-full-system-backup-error-2155348129?forum=windowsbackup
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Call to WPG_SESSION API Failed. Error-Code:20001

Similar Messages

Maybe you are looking for