Call transaction in the popup screen
hi friends . ı want to call transaction in the popup screen.
what do ı do ?
thanks.
to call a transaction in the popup screen
can u give me one scenerio
because
try this
create a program of type report
in that "call screen '100' starting 10 10 ending at 100 100.
and u click on this 100 and make the layout what ever u want
and just go to se93 create transaction for this report program
thats it
if it ok
then ur problem is solved
or else it is not solved
Similar Messages
-
Call transaction & leave the current screen
Hi
I have created two Table maintanence Generator one for master table & second for transaction table. In my master table i have written code for calling the second TMG
ie, call transaction 'zhdms'.
but my problem is from my first TMG when im clicking on one button it calling the second TMG. & im making new entries over der & when i click on BACK button it will call the first TMG & again if i am clicking on Next button it will move on to second screen. but it is showing one information like DEveloper is locked. we can only display it. how to avoid this.
Can we avoid this using leave screen . How to write code for that.Hi ,
Try this
CALL TRANSACTION AND SKIP FIRST SCREEN.
Effect
Skips the first screen in the transaction (provided all the required fields have been assigned values by the SPA/GPA mechanism).
or
LEAVE TO { {TRANSACTION tcod} | {CURRENT TRANSACTION} } AND SKIP FIRST SCREEN.
Effect
Ends current processing and starts the (new) transaction tcod. All previous internal sessions are deleted from the stack and one new internal session is opened for the program of the transaction that was called. When this session has finished, the system returns to the next higher area menu.
If you specify CURRENT TRANSACTION (as of Release 6.20), the current transaction is called with exactly the same transaction code it was called with using CALL TRANSACTION or LEAVE TO TRANSACTION. With the exception of parameter or variant transactions, this is the transaction code that is also in the system field sy-tcode.. In the case of parameter or variant transactions, it is their transaction code, while sy-tcode contains the name of the implicitly-called dialog transaction.
Regards,
Chitra. -
CALL TRANSACTION AND SKIP FIRST SCREEN to specified tab in TCODE 'IW32'
Hi,
I am using CALL TRANSACTION AND SKIP FIRST SCREEN in ALV Grid Report to call IW32 tcode and it goes to tcode skipping the first screen. But it goes to the default header tab in the tab control. Whereas I wish to go to the specified tab 'OPERATIONS'.
Can any one help me, as to how to resolve this issue ?
Thanks in advance.Sridher,
I have the similar requirement. but in my case its COSTS tab. Could you please provide the code you have used for this to work?
I used standard "call transaction with mode 'E' ". This seems to be working but I am not pleased by my effort. Is there any proper way that you might have followed ?
Greatly appreciated your help.
Regards,
Reddy -
Web Dynpro ABAP call transaction in the foreground
In Screen Painter/SAP ALV, we can create a screen where for example if you double click on a sales order field it can take you a VA03 transaction by :
call transaction VA03 ... and skip first screen.
I am creating Web Dynpro ABAP application that needs to do the same thing where if we click on the field, it will take to VA03 transaction or other transactions.
Has anyone done this in Web Dynpro ABAP? I have done some research and determine that we cannot call transaction in the foreground? I hope I am wrong. Any help/insights will be greatly appreciated.Hi Phong,
WDA is generic client to Netweaver connection based on HTTP/S.
At this stage on a few clients are supported. WEB dynpro client and Browsers...
SAPGUI connects to SAP using a different protocol.
No SAPGUI connection is implied by a WDA client connection.
Therefore abap statements that invoke screens and otherwise assume SAPGUI
is connected are not supported in WDA. eg call screen, call transaction
You can either
a) build your own WDC to front end calls to BAPIs to get the Sales order data.
b) open/ exit to the new WDC for Sales Orders in ERP2005
see LORD_MAINTAIN_COMP
c) exit to the INTERNAL ITS URL for transaction VA03
eg http://<host>:<port>/sap/bc/gui/sap/its/webgui?~Transaction=VA03
but getting the skip first screen may require you to call custom tran ZVA03
which calls VA03 to skip first screen setting the PID appropriately.
Hopefully you opt for option a) or b).
c) can work... I have used it from BSPs but it not pretty.
regards
Phil -
When my iPhone 4S (with ios7) experiences a failed call while connected to my Bluetooth hands free in my car(screen locked) the failed call appears on the locked screen, as it should, the problem arises whenever I unlock the phone, it automatically redials the last failed call, it doesn't do this with missed calls that are on the locked screen, if any. It is really annoying as sometimes the phone doesn't respond to attempts to end the call before it connects to the number. I then have to explain that it was my phone and not me, I look like an idiot, which I don't really need any extra help with!! Does anyone have any ideas? I don't want to stop missed call from showing in the locked screen but it might be associated with the failed calls and therefore be the only resolution
I have had the same issue which was driving me mad but think I have just found a way around it. In iOS 7 if you swipe up on the lock screen to access quick settings and go into timer then click the home button you get into the phone without calling the person back. Not a great 'fix' but hope it works for you. Come on Apple this isn't good enough, fix this bug otherwise you will lose your customers.
-
On my new iPhone, at the Apps store, I tried to make a purchase, the popup screen shows my Apple ID and asks for my password, but no keyboard appears so that I can enter the password. How do I get the keyboard to appear??
On your iPad, delete the existing account then sign back in with the new ID and password.
-
How can I remove the Emergency Call button from the lock screen Xperia Z2
How can I remove the Emergency Call button from the lock screen on my Z2 phone
Alecuk wrote:
It's like the stupid bold font on the hours or the lock screen clock - i've never seen anything so stupid in all my life.
it's things like this that make a good phone c.r.a.p.
Hi, well if you do a little bit of research on the forum you will be able to see that you can & very easily able to change the font on the clock -
How can i get the small sircul contact pic when I receive or make calls instade of the full screen pic ?? Can u help me plz
Settings you make in ACR for a Raw file are written to the separate XMP side car file. (The Camera Raw preferences has this set by default and to my opinion it should stay so, but the other option is to save them in a central database)
However, opening the same file in ACR and make new adjustments the previous settings are overwritten by the new ones. You can save them separately but that would be a hell of a job. If you want to be on the safe side you should make a proper back up of the whole folder (be sure to have the XMP files included, by default those are hidden files in Bridge) before someone else starts playing with the settings. However, you can always go back to the default version using the option in the little menu icon next to the name op f the panel (first panel is Basic). click on the icon and from the provided menu choose 'Reset Camera Raw Defaults' to go back to the originals.
I don't use jpeg in ACR very often but I believe ACR settings for jpeg and tiff are written in the XMP data in the file itself instead of a separate XMP file. You can revert to default or make new settings that also overwrite the older settings.
Making adjustments in ACR shows the results in Bridge (it uses the XMP data for the preview) but to make it visible in other apps you also have to save them in Photoshop itself to make the changes persistent so that mail and print reflect your settings.
So basically, let her play with the files and either chose the option to save the files (bottom left in ACR Window and choose the wanted provided options or open and save them in Photoshop to get the proper result. And if you want to be on the safe side let here use her own copies and keep the originals to your self. -
Call transaction and skip first screen
Hi,
I have a little but I think difficult problem
I have a selection screen and after that I call my dnypro. In this dynpro I can open a dynpro which looks like a popup where I have the possibility to call the same transaction with other input paramters.
the problem is when I make call transaction and want to go back I see the pop up dynpro which calls the transaction. so how can I close this popup dynpro by calling again transaction?I think I can't eyplain it.
Following. I have:
call transaction trans: selection screen calls dynpro 100, in dynpro 100 button with dynpro 200 with starting parameters.
dynpro 200 calls again transaction trans with skip first screen.
now I have displayed again dynpro 100 with new values. When I now want to go back I can see dynpro 200 which called the transaction. So how can I achieve this that dynpro 200 isn't shown when I go back ? -
Call Transaction and skip first screen on workflow task
Hello, I'm developing a workflow with a user decison step, where the user should fill some data in transaction FD02.
When the user presses the button in the workitem, the wf goes to a step where i should call transaction FD02.
I'm using SET PARAMETER ID: 'KUN' FIELD customer. to fill the customer field and CALL TRANSACTION 'FD02' AND SKIP FIRST SCREEN.
But when I press the button in the workitem nothing happens. I tested the same in a report and it works. Can anybody help me?
Thanks a lot.Hi,
try below code
data: fcode type FCODE value 'ANTRAGAEN',
customer type kunner,
bukrs type bukrs.
SET PARAMETER ID 'KUN' FIELD customer. " to fill the customer field
SET PARAMETER ID 'BUK' FIELD companycoder. " to fill the company code
SET PARAMETER ID 'TTC' FIELD fcoder. " to fill Function code for enter " it may be other than TTC please check.
CALL TRANSACTION 'FD02' AND SKIP FIRST SCREEN. -
Call Transaction and skip first screen in SE37
Hi All,
I want call transaction SE37 and skip first screen of it. Is it possible through the statemen Call transaction 'SE37' and skip first screen ?.
Of course I have populated the parameter id 'LIB' before this statement but it is not working. Though I have found several posts with this solution but it's not working for me. Could anyone please let me know if this can be done using this statement or there are any other additions required along with this statement or it is not at all possible to achieve this functionality.
Thanks in advance !!.Solved! without a solution? very funny.
In somewhere of second screen related bdcdata, intensionlly make a mistake to force the system throws the error and the call the trasnaction with mode 'E'. This will solve the issue.
perform bdc_field using 'BDC_CURSO' " I removed letter R in 'BDC_CURSO'
'ISEG-ERFMG(01)'.
CALL TRANSACTION 'XXXX' USING BDCDATA MODE 'E'.
Thanks.
Suresh Yerra. -
Call transaction - not skipping first screen until browser window maximized
I've had a search on the forum for this but have not been able to find an answer. I'm calling an SAP transaction from a Web Dynpro application, passing over a document number and asking it to skip the first screen, as follows:
CONCATENATE 'http'
'://' host ':' port
'/sap/bc/gui/sap/its/webgui/?~transaction=MIR4 RBKP-BELNR=5105600751' '&DYNP_OKCODE=SHOW'
into url.
This pops up the transaction in the new window with the document number (hard-coded above while I'm testing this out) but doesn't immidiately skip the the first screen. The browser window opens at a reduced size and as soon as as I maximize it (not pressing enter or doing anything else), that's when it jumps through to the detail screen. A little strange.
Does anyone have any ideas why it's doing this and what I can do to correct it ?
thanks,
Malcolm.this is now resolved. My call to the transaction was slightly incorrect. This is now the working code:
CONCATENATE 'http'
'://' host ':' port
'/sap/bc/gui/sap/its/webgui/?~transaction=*MIR4 RBKP-BELNR=5105600751' ';DYNP_OKCODE=SHOW'
into url. -
Call transaction from the ABAP report
Hi Gurus,
Please help me with suggestion. I would like to access from SAP report with double click transaction FB03. I can access it, but in old transaction view ... How can I get the new transaction view?
Here is the code,
BR
Saso
IF fieldname CS 'BELNR'.
PERFORM bdc_screen USING 'SAPMF05L' '100'.
PERFORM bdc_field USING 'RF05L-BELNR' fieldvalue.
PERFORM bdc_field USING 'RF05L-BUKRS' '0008'.
PERFORM bdc_field USING 'RF05L-GJAHR' int-gjahr.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
CALL TRANSACTION 'FB03' USING bdc_data MODE 'E'.
REFRESH bdc_data.
ENDIFTry this Example:
REPORT ZABHI_TABSTRIP NO STANDARD PAGE HEADING
LINE-SIZE 80 LINE-COUNT 60.
TABLES : sscrfields.
DATA activetab(6) TYPE c .
DATA mat_des TYPE makt-maktx.
DATA pl_des TYPE t001w-name1 .
DATA mat_gro TYPE mara-mbrsh .
DATA mat_typ TYPE mara-mtart .
SELECTION-SCREEN BEGIN OF SCREEN 001 AS SUBSCREEN NO INTERVALS.
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-002 NO INTERVALS.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 14(18) text-010 FOR FIELD matnr.
PARAMETERS matnr TYPE mara-matnr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK block1.
SELECTION-SCREEN END OF SCREEN 001.
SELECTION-SCREEN BEGIN OF SCREEN 002 AS SUBSCREEN NO INTERVALS.
SELECTION-SCREEN BEGIN OF BLOCK block2 WITH FRAME TITLE text-003 NO INTERVALS.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 14(18) text-020 FOR FIELD matnr.
PARAMETERS werks TYPE t001w-werks.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK block2.
SELECTION-SCREEN END OF SCREEN 002.
SELECTION-SCREEN BEGIN OF SCREEN 003 AS SUBSCREEN NO INTERVALS.
SELECTION-SCREEN BEGIN OF BLOCK block3 WITH FRAME TITLE text-004 NO INTERVALS.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 14(18) text-030 FOR FIELD matnr.
PARAMETERS mbrsh TYPE mara-mbrsh.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK block3.
SELECTION-SCREEN END OF SCREEN 003.
SELECTION-SCREEN BEGIN OF SCREEN 004 AS SUBSCREEN NO INTERVALS.
SELECTION-SCREEN BEGIN OF BLOCK block4 WITH FRAME TITLE text-005 NO INTERVALS.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 14(18) text-005 FOR FIELD matnr.
PARAMETERS mtart TYPE mara-mtart.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK block4.
SELECTION-SCREEN END OF SCREEN 004.
SELECTION-SCREEN BEGIN OF TABBED BLOCK tabb1 FOR 5 LINES NO INTERVALS.
SELECTION-SCREEN TAB (15) tabs1 USER-COMMAND ucomm1
DEFAULT SCREEN 002.
SELECTION-SCREEN TAB (15) tabs2 USER-COMMAND ucomm2 .
SELECTION-SCREEN TAB (15) tabs3 USER-COMMAND ucomm3.
SELECTION-SCREEN TAB (15) tabs4 USER-COMMAND ucomm4.
* DEFAULT SCREEN 002 .
SELECTION-SCREEN END OF BLOCK tabb1.
INITIALIZATION.
tabs1 = text-002.
tabs2 = text-003.
tabs3 = text-004.
tabs4 = text-005.
activetab = 'TABS1'.
AT SELECTION-SCREEN .
CASE sscrfields-ucomm.
WHEN 'UCOMM1'.
tabb1-prog = sy-repid.
tabb1-dynnr = 001.
tabb1-activetab = 'TABS1'.
activetab = 'TABS1' .
WHEN 'UCOMM2'.
tabb1-prog = sy-repid.
tabb1-dynnr = 002.
tabb1-activetab = 'TABS2'.
activetab = 'TABS2'.
WHEN 'UCOMM3'.
tabb1-prog = sy-repid.
tabb1-dynnr = 003.
tabb1-activetab = 'TABS3'.
activetab = 'TABS3'.
WHEN 'UCOMM4'.
tabb1-prog = sy-repid.
tabb1-dynnr = 004.
tabb1-activetab = 'TABS4'.
activetab = 'TABS4'.
ENDCASE.
START-OF-SELECTION.
CASE activetab.
WHEN 'TABS1'.
SELECT SINGLE maktx FROM makt INTO pl_des WHERE matnr = matnr.
WRITE: 'Material ' , matnr , mat_des .
WHEN 'TABS2'.
SELECT SINGLE name1 FROM t001w INTO pl_des WHERE werks = werks.
WRITE: 'Plant ' , werks ,pl_des.
WHEN 'TABS3'.
SELECT SINGLE mbrsh FROM mara INTO mat_gro WHERE mbrsh = mbrsh.
WRITE: 'Material Group ' , mbrsh ,mat_gro.
WHEN 'TABS4'.
SELECT SINGLE mtart FROM mara INTO mat_typ WHERE mtart = mtart.
WRITE: 'Material Type ' , mtart , mat_typ.
ENDCASE.
And let me know. -
Execute CALL TRANSACTION in the background....
Hi,
I want to use CALL TRANSACTION in a report program and execute this report in the background.
There is not GUI_UPLOAD / GUI_DOWNLOAD used anywhere.
Can someone suggest me what precaution I need to take in my code for CALL TRANSACTION?
Is there any additional code for background processing?
Thanks.hi,
this is the sample code:
Precations need to take :
1. see that u r transfer tha data in correct field, on correct screen, and of correct format.
2. capture the error logs in bdcmsgcoll - error logs have to be handle.
3. ensure correct recording.
in selection screen you can mention in which mode u want :
A Display all screens
E Display errors
N Background processing
P Background processing; debugging possible
This is the sample code:
& Report ZKO01_BDC &
& Object Id : &
& Object Name : ZKO01_BDC &
& Program Name : ZKO01_BDC &
& Transaction Code: ZKO01_BDC &
& Module Name : FI / CO &
& Program Type : BDC Program Create Date : 23.06.2008 &
& SAP Release : 6.0 Transport No : &
& Description : BDC to upload internal order with indernal assignment &
& Version : 1.0. &
& Changed on : &
report zko01_bdc
no standard page heading line-size 255.
types: begin of record,
auart_001(004),
ktext_002(040),
bukrs_003(004),
werks_004(004), " ADDED NEW - RAHUL SHINDE
scope_005(010),
prctr_006(004), " ADDED NEW - RAHUL SHINDE
waers_007(005),
astkz_008(001),
plint_009(001),
end of record.
types: begin of ty_stats,
mess(72) type c,
auart_001(004),
text(18) type c,
end of ty_stats.
data : it_record type table of record,
wa_record like line of it_record.
data: bdcdata type table of bdcdata,
mestab type table of bdcmsgcoll.
data : stats type table of ty_stats.
data: opt type ctu_params.
data: m(72) type c.
data : fl_name type string.
data : wa_bdcdata like line of bdcdata,
wa_mestab like line of mestab.
data : wa_stats like line of stats.
data: ctumode like ctu_params-dismode.
data: cupdate like ctu_params-updmode.
data: file type rlgrap-filename.
data: xcel type table of alsmex_tabline with header line.
data: mod1(1) type c.
initialization.
opt-dismode = 'A'.
opt-updmode = 'S'.
opt-nobinpt = 'X'. "No batch input mode
Selection Screen
selection-screen begin of block bk1 with frame.
selection-screen skip 1.
parameters p_file type localfile. " default 'D:\Common\PWC\Asset BDC\Book2.xls'.
parameters p_mode like ctu_params-dismode obligatory.
selection-screen skip 1.
selection-screen end of block bk1.
file = p_file.
mod1 = p_mode.
at selection-screen on value-request for p_file.
call function 'KD_GET_FILENAME_ON_F4'
exporting
static = 'X'
changing
file_name = p_file.
Selection Screen
start-of-selection.
file = p_file.
ctumode = mod1.
cupdate = 'L'.
call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
exporting
filename = file
i_begin_col = '1'
i_begin_row = '1'
i_end_col = '100'
i_end_row = '5000'
tables
intern = xcel
exceptions
inconsistent_parameters = 1
upload_ole = 2
others = 3.
loop at xcel.
case xcel-col.
when '0001'.
wa_record-auart_001 = xcel-value. "ok
when '0002'.
wa_record-ktext_002 = xcel-value. "ok
when '0003'.
wa_record-bukrs_003 = xcel-value. "ok
when '0004'.
wa_record-werks_004 = xcel-value. "ok
when '0005'.
wa_record-scope_005 = xcel-value. "ok
when '0005'.
wa_record-KTEXT_005 = xcel-value. "ok
when '0006'.
wa_record-prctr_006 = xcel-value. "ok
when '0007'.
wa_record-waers_007 = xcel-value. "ok
when '0008'.
wa_record-astkz_008 = xcel-value. "ok
when '0009'.
wa_record-plint_009 = xcel-value. "ok
endcase.
at end of row.
append wa_record to it_record.
clear wa_record.
endat.
endloop.
loop at it_record into wa_record.
perform bdc_dynpro using 'SAPMKAUF' '0100'.
perform bdc_field using 'BDC_CURSOR'
'COAS-AUART'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'COAS-AUART'
wa_record-auart_001.
perform bdc_dynpro using 'SAPMKAUF' '0600'.
perform bdc_field using 'BDC_OKCODE'
'=BUT2'.
perform bdc_field using 'COAS-KTEXT'
wa_record-ktext_002.
perform bdc_field using 'BDC_CURSOR'
'COAS-SCOPE'.
perform bdc_field using 'COAS-BUKRS'
wa_record-bukrs_003.
perform bdc_field using 'COAS-WERKS'
wa_record-werks_004.
perform bdc_field using 'COAS-SCOPE'
wa_record-scope_005.
perform bdc_field using 'COAS-PRCTR'
wa_record-prctr_006.
perform bdc_dynpro using 'SAPMKAUF' '0600'.
perform bdc_field using 'BDC_OKCODE'
'=SICH'.
*perform bdc_field using 'COAS-KTEXT'
wa_record-KTEXT_005.
perform bdc_field using 'BDC_CURSOR'
'COAS-PLINT'.
perform bdc_field using 'COAS-WAERS'
wa_record-waers_007.
perform bdc_field using 'COAS-ASTKZ'
wa_record-astkz_008.
perform bdc_field using 'COAS-PLINT'
wa_record-plint_009.
call transaction 'KO01' using bdcdata
options from opt
messages into mestab.
*PERFORM loggs.
clear wa_record.
refresh bdcdata.
endloop.
end-of-selection.
clear : wa_stats.
if stats is initial.
write :/ text-001.
else.
loop at stats into wa_stats. "displays runtime messages
write:/ 'MESSAGE :',wa_stats-auart_001.
if wa_stats-auart_001 is not initial.
write:/ wa_stats-auart_001, wa_stats-text.
endif.
skip 1.
endloop.
endif.
*& FORMS BDC_DYNPRO
form bdc_dynpro using program dynpro.
clear wa_bdcdata.
wa_bdcdata-program = program.
wa_bdcdata-dynpro = dynpro.
wa_bdcdata-dynbegin = 'X'.
append wa_bdcdata to bdcdata..
endform.
FORM BDC_FIELD *
form bdc_field using fnam fval.
clear wa_bdcdata.
wa_bdcdata-fnam = fnam.
wa_bdcdata-fval = fval.
append wa_bdcdata to bdcdata..
endform.
*& Form loggs
text
--> p1 text
<-- p2 text
form loggs .
loop at mestab into wa_mestab.
if wa_mestab-msgtyp = 'E'.
call function 'FORMAT_MESSAGE'
exporting
id = wa_mestab-msgid
lang = 'E'
no = wa_mestab-msgnr
v1 = wa_mestab-msgv1
v2 = wa_mestab-msgv2
v3 = wa_mestab-msgv3
v4 = wa_mestab-msgv4
importing
msg = m
exceptions
not_found = 1
others = 2.
wa_stats-mess = m.
wa_stats-text = text-001. "'Not Created'.
wa_stats-auart_001 = wa_record-auart_001.
"wa_stats-sernr = wa_flat-sernr.
append wa_stats to stats.
elseif wa_mestab-msgtyp = 'S'.
call function 'FORMAT_MESSAGE'
exporting
id = wa_mestab-msgid
lang = 'E'
no = wa_mestab-msgnr
v1 = wa_mestab-msgv1
v2 = wa_mestab-msgv2
v3 = wa_mestab-msgv3
v4 = wa_mestab-msgv4
importing
msg = m
exceptions
not_found = 1
others = 2.
if wa_mestab-dyname = 'SAPMIEQ0'
and wa_mestab-dynumb = '0101'
and wa_mestab-msgspra = 'E'
and wa_mestab-msgid = 'IS'
and wa_mestab-msgnr = '144'.
loop at stats into wa_stats where auart_001 = wa_record-auart_001.
"and sernr = wa_flat-sernr.
delete stats.
endloop.
clear : wa_stats.
wa_stats-mess = m.
append wa_stats to stats.
endif.
endif.
clear : wa_stats.
endloop.
endform. " loggs
Edited by: Naseeruddin on Nov 26, 2008 8:57 AM -
Calling transaction with different start screen
Hello
I have two transactions TRANSACTION 1 and TRANSACTION 2, made by myself.
TRANSACTION 1 has screen 001 as initial. It also has another screens.
I want to call TRANSACTION 1 from TRANSACTION 2 starting not with screen 001, but for example with screen 005. Is that possible?HI,
As an alternative, you will have to do a partial BDC recording for the transaction and write the code to call the transaction in ERROR mode.
Go to shdb transaction.
Create a recording for the transaction.
Enter the required data and when you reach the screen you want, just backout.
This would create a recording.
Using this recording, you have to create a BDC program which would call the transaction in Error mode.
Regards,
Ravi
Maybe you are looking for
-
Stock Transfer Report after Invoice
Hello Experts Please spend one minute's time to read this. It may be long but its the exact scenario. I have got a requirement to generate a Stock Transfer Report for the bills passed (invoice receipt) for a particular date range. Note that the deliv
-
This has been crippling my mac for ages. Everytime I open or save a file, or try and get info from one in "columns view" finder or the window just hangs for about 5mins or so. Finally someone here suggested I check the console and I get a looping err
-
Error when calling a hosted WCF in Service Application anonymously
Hi, I have a WCF service hosted in SharePoint 2013 service application, I am able to call this endpoint when i am logged in but after i enabled the anonymous access in sharepoint, i am not able to call the WCF endpoint and the error that i am getting
-
How to render with alpha channel?
Hello, I am trying to render a comp with alpha channel QT PNG. When i play the clip it's with black BG but if i imported in AE is with alpha channel. How to render in such way that i can play in Quicktime without the black BG? Am i missing somethi
-
Argentina missing?: User Administration- Create User- Contact Information
Hi!: Logon in the portal --> User Administration-> Create User --> look at "Contact Information" there's a country combo box and Argentina is not there. I want to know how to put the country in the combo box. Seems to be all the countries in the worl