Call WD Java from WD ABAP

Hi ,
My requirement is to call WD java in portal from WD ABAP .
I Searched and found it is possible by using PCD Path but i am not able to do .
I tried it and now called application is opening up but full portal opens up in a separate browser , i want only that Iview should open in same browser.
CALL METHOD LR_PORT_MANAGER->NAVIGATE_ABSOLUTE
    EXPORTING
      NAVIGATION_TARGET   = TARGET
      NAVIGATION_MODE     = MODE.
Regards
Nikhil Arya.

Hi ,
You can call by below code :
CALL METHOD lo_portal_manager->NAVIGATE_ABSOLUTE
EXPORTING
"NAVIGATION_TARGET = 'ROLES://portal_content/****''
Here in Naviagation_Target, you need to give the WDJ iview PCD path with prefix ROLES:// as shown above..
- Vasu

Similar Messages

Calling a webservice from webdynpro ABAP.

Hi,
Anybody have doc/material with screenshots on calling a webservice from webdynpro ABAP (In WAS 7.0 version using service calls ) with clear steps ?
Thanks in advance. Ponts will not be a constraint for right answers
Praveen
Edited by: Praveen kumar Kadi on Feb 23, 2009 11:19 AM

Hi Praveen,
1st Step : configure Logical Port
http://help.sap.com/saphelp_nw70/helpdata/EN/16/285d32996b25428dc2eedf2b0eadd8/frameset.htm
2nd Step : Generate Proxy Object
http://help.sap.com/saphelp_nw70/helpdata/EN/16/285d32996b25428dc2eedf2b0eadd8/frameset.htm
3rd Step : Instantiating the proxy object & calling the methods exposed by webservice
data: sys_exception type ref to cx_ai_system_fault,
      sys_exception2 type ref to cx_ai_application_fault,
      client_proxy type ref to zco_myesa, "MY PROXY CLASS
      lv_ret_code type int4,
      lv_input type zsend_email_input,
      lv_response type zsend_email_response.
data: lv_from type string,
      lv_from_address type string,
      lv_to type string,
      lv_to_address type string,
      lv_subject type string,
      lv_msg type string.
lv_input-from = 'MYSAPTEST'.
lv_input-from_address = '<someAddress>'.
lv_input-to = 'Prashant'.
lv_input-to_address = '<someAddress>'.
lv_input-subject = ' TEST'.
lv_input-msg_body = ' Hi this is wonderfull to see it work'.
try.
create object client_proxy
exporting
logical_port_name = 'BASIC'. " Basic is a TYPE G RFC Destination
call method client_proxy->send_email
   exporting
     input = lv_input
   importing
     output = lv_response    .
catch cx_ai_system_fault into sys_exception .
    data lv_err type string.
     lv_err = sys_exception->if_message~get_text( ).
     write: / lv_err.
catch cx_ai_application_fault into sys_exception2 .
     lv_err = sys_exception->if_message~get_text( ).
     write: / lv_err.
endtry.
if lv_response is initial.
   write: /'Not Executed'.
else.
   write: /'Did Execute'.
endif.
Greetings
Prashant

How to call a webService from WebDynPro ABAP ?

We are trying to call a webService from WebDynPro-ABAP application. It is not working, While if we are calling the WebService from a Report, it is working.
How exactly do we call a WebService from a WebDynPro-ABAP application?
What are the main steps involved ?

Hi Phani,
You will need to create a service call as follows.
Right click on your WD component name and select Create->Service Call
The wizard will guide you through a series of steps to make a Web Service Call. On the 3rd screen, it will give you options such as Function Module, Web Service, etc
Before making a service call, you will need to create a proxy for the Web service in the ABAP Workbench using a WSDL document as a basis. To create or consume Web services, you will need the authorizations associated with the role SAP_BC_WEBSERVICE_ADMIN.

Call se38 program from an abap proxy

Hi, All,
For some reasons, I have to call a se38 program (or tcode) instead of calling a FM from an abap proxy. Also I have to pass an internal table to the program (or tcode). Is there anybody know how to do it? Thanks.
Meiying

Is there no BAPI available for this "reason"?
Or create your own (BAPI compliant) FM and just call that?
Please explore transaction BAPI (incase you are not aware of it yet).
If you exposed a remote way to submit (any) report using an internal table which that "any report" can use, then chances are good that your ABAP proxy would be a bit of a security hazard...
Or am I missing the point here?
Perhaps you could explain the scenarioa bit, and then appropriate solutions can be suggested.
Cheers,
Julius

Calling WebAS Java from Excel Macro

Hi,
somebody told me there were a way to call WebAS Java from an Excel Macro and make a login into SAP using a real existing user (not a technical user). Does anybody know where to find documentation about this or how to get this accomplished?
Thanks, Oliver Plohmann

Hi,
Have a look at
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnofftalk/html/office09062001.asp
Eddy

Calling external Java from ABAP using JCo?

Does anyone know if one can use JCo to write a server application that can be called from ABAP.
We are presently using JCo to communicate from Java to SAP.
But we need to call an external Java program from within ABAP.
Is this possible?
Thanks for any input.
Fred

Hi Gregor,
I was hoping you would reply to this -- these posted messages had been here for quite sometime now.
Anyway, here's the case. Our Basis team is installing the JCo in our SAP development server. This is our first time to implement this technology, so no one has a clue at all.
Got a couple of questions for you...
1. What do we need the JDK for? Is it mainly for editing, running, and compiling java files (e.g. Example5.java)?
2. Does the JDK need to be installed at the SAP server as well? Or it doesn't matter, as long as the java files will be accessible from where it was installed at?
Thanks for any response!

How do i call web services from SAP ABAP

Hello,
Ian working with .net team. they are using sap .net Connector to connect SAP. But my job is In SAP side when Purchase Requisition is created, I have to call web services from ABAP and i have to pass the Purchase Requisition number to web service(.net Program). Please help me how to call web services from ABAP and how to pass value. Any one help me with example.
Thanks
RaviKumar

Hi Ravi,
If you can call EJB from ABAP and from EJB call Web service which you want to call. I am giving code to write in EJB business method processFunction.
public void processFunction(Function function) {
   IRepository repository;
   repository = new Repository("TestRepository");
   JCO.MetaData fmeta = new JCO.MetaData("ZTEST_EJB");
   fmeta.addInfo("REQUTEXT", JCO.TYPE_CHAR, 255,   0, 0,
   JCO.IMPORT_PARAMETER, null);
   fmeta.addInfo("ECHOTEXT", JCO.TYPE_CHAR, 255,   0, 0,
   JCO.EXPORT_PARAMETER, null);
   fmeta.addInfo("RESPTEXT", JCO.TYPE_CHAR, 255,   0, 0,
   JCO.EXPORT_PARAMETER, null);
   repository.addFunctionInterfaceToCache(fmeta);
   JCO.ParameterList input =
   function.getImportParameterList();
   JCO.ParameterList output =
   function.getExportParameterList();
   JCO.ParameterList tables =
   function.getTableParameterList();
if (function.getName().equals("ZTEST_EJB")) {
                    output.setValue(input.getCharArray("REQUTEXT"),"ECHOTEXT");
output.setValue("This is a response " + table.getString("E_NAME") +" " + output.getName(1), "RESPTEXT");
else if (function.getName().equals("STFC_STRUCTURE")) {
JCO.Structure sin = input.getStructure("IMPORTSTRUCT");
JCO.Structure sout = (JCO.Structure)sin.clone();
try {
      System.out.println(sin);
   catch (Exception ex) {
       System.out.println(ex);
                    output.setValue(sout,"ECHOSTRUCT");
output.setValue("This is a response from Example5.java","RESPTEXT");
}//if
Here REQUTEXT, ECHOTEXT are import parameter and RESPTEXT is the Export parameter of Function module ZTEST_EJB in SAP.
Here from this bisuness method you can call web service which you want and give back the result of webservice to ABAP F.M.
Regards,
Bhavik

Example of how to call a BadI from an Abap and use the NEW OO ALV Grid

Very easy to do.
<b>REPORT Z_BADI_TEST.
test call Badi from standard abap.
*Only from rel 6.40
do the following
1) define the Badi (SE18).
For Abap call test uncheck multiple use
and filter boxes
2) Implement the badi (SE19).
Add any methods here in the implementation
3) activate
4) define the standard class exithandler to the
Abap. This class is the "Badi caller
5) define an exit variable referring to your Badi
Implementation interface
this interface will normally be
called something like
ZIF_EX***************
You will see the actual name in SE18/SE19.
6) Instantiate your instance of the badi
via method call get_instance
7) Now call any method(s) in the Badi.
*****************start of abap code **************
Define the Badi calling class (standard sap class)
class cl_exithandler definition load.   "Declaration
*Interface reference
data exit type ref to zif_ex__jimbotest.
     data yes type c.
Used in Fmod call in Badi methods
    data: v_knvv type knvv.
    start-of-selection.
    yes = ' '.
selection-screen begin of block b1.
parameters: r1 radiobutton group rad1,
              r2 radiobutton group rad1,
              r3 radiobutton group rad1.
selection-screen end of block b1.
    parameters: p_kunnr type knvv-kunnr.
    select single * into v_knvv
    from knvv
     where kunnr eq p_kunnr.
     export v_knvv to memory id 'CUST6A'.
*Save customer data for the function module call
call method cl_exithandler=>get_instance
       exporting
       exit_name    = 'Z_JIMBOTEST' "Your Badi Name
       null_instance_accepted = yes
          changing instance = exit.
   if not exit is initial.
       if r1 = 'X'.
     call method exit->dispord . "Badi call
      endif.
if r2 = 'X'.
call method exit->dispfakt.     "Badi Call
endif.
if r3 = 'X'.
call method exit->dispmat.      "Badi call
endif.
end of calling abap******** </b>
In the badi   methods code as shown
1)
method ZIF_EX__JIMBOTEST~DISPORD.
CALL FUNCTION 'Z_DISPLAY_CUST'.
endmethod.
2)
method ZIF_EX__JIMBOTEST~DISPFAKT.
CALL FUNCTION 'Z_DISPLAY_FAKT'.
endmethod
3)
method ZIF_EX__JIMBOTEST~DISPMAT.
CALL FUNCTION 'Z_DISPLAY_CUST'.
endmethod.
Copy via SE 41 the status SALV_STANDARD from standard SAP program SALV_DEMO_METADATA into the main program where you've created the 3 function modules below (SAP______TOP)
Global Data for the three function modules I'm calling
FUNCTION-POOL Z_BADI_KNVV.                  "MESSAGE-ID ..
include <color>.
include <icon>.
include <symbol>.
tables: zknvv.
data: v_zzkvgr6 TYPE KNVV-ZZKVGR6.
data: choice1 type c.
data: choice2 type c.
data: choice3 type c.
data: choice4 Type c.
data: ok-code(5) type c.
data: answer type string.
data: value1 type SPOP-VARVALUE1.
data: answer1 type string.
tables: vbak, vbap, vakpa, vbrk, vrkpa.
data: lr_functions type ref to cl_salv_functions_list.
constants: gc_true type sap_bool value 'X',
           gc_false type sap_bool value space.
add for colour displays
   data: ls_color type lvc_s_colo.
   DATA : LV_SALV_COLUMNS_TABLE TYPE REF TO CL_SALV_COLUMNS_TABLE.
data: lr_columns type ref to cl_salv_columns_table,
        lr_column type ref to cl_salv_column_table.
Data:
        gr_table TYPE REF TO cl_salv_table.
data: z_datum type sy-datum.
data: v_knvv type knvv.
data : begin of s_vbak,
          vkorg   type vakpa-vkorg,
          vkgrp   type vakpa-vkgrp,
          vtweg   type vakpa-vtweg,
          spart   type vakpa-spart,
          auart   type vakpa-auart,
          vbeln   type vakpa-vbeln,
          bstnk   type vakpa-bstnk,
          audat   type vakpa-audat,
          netwr   type vbak-netwr,
       end of s_vbak.
data : begin of s_vbrk,
          vbeln   type vrkpa-vbeln,
          vkorg   type vrkpa-vkorg,
          fkart   type vrkpa-fkart,
          fkdat   type vrkpa-fkdat,
          netwr   type vbrk-netwr,
       end of s_vbrk.
data: begin of s_vbap,
         matnr   type vbap-matnr,
         arktx   type vbap-arktx,
         netwr   type vbap-netwr,
         kwmeng type vbap-kwmeng,
      end of s_vbap.
data: t_vbap like table of s_vbap.
data:   t_vbak
        like table of s_vbak.
data:   t_vbrk
        like table of s_vbrk.
data:   s_name type tabname.
data: gr_selections type ref to cl_salv_selections.
data: gr_events type ref to cl_salv_events_table.
Source code of the function modules.
Function modules themselves
FUNCTION Z_DISPLAY_CUST.
s_name = 'S_VBAK'.
orders in last 6 months
z_datum = sy-datum - 180.
import v_knvv from memory id 'CUST6A'.
get data
   select avkorg aaudat avkgrp avtweg aspart aauart abstnk avbeln b~netwr
      into corresponding fields of table t_vbak
      up to 100 rows
         from ( vakpa as a
          inner join vbak as b
           on avbeln eq bvbeln )
        where a~kunde eq v_knvv-kunnr
        and a~parvw eq 'AG'
       and a~vkorg eq 'EN01'
        and a~trvog eq '0'
        and a~audat gt z_datum.
sort t_vbak by audat descending.
*data: gt_hyperlink type standard table of g_type_s_hyperlink.
Instead of if_salv_c_bool_sap=>false, you can pass the
value if_salv_c_bool_sap=>true to this method to
see your ALV as a list.
display data in Grid / List
TRY.
      CALL METHOD cl_salv_table=>factory
        EXPORTING
          list_display   = if_salv_c_bool_sap=>false
        IMPORTING
          r_salv_table   = gr_table
        CHANGING
          t_table    = t_vbak.
    CATCH cx_salv_msg.
ENDTRY.
try.
LV_SALV_COLUMNS_TABLE = gr_table->get_columns( ).
lr_column ?= LV_SALV_COLUMNS_TABLE->get_column( 'NETWR' ).
      ls_color-col = col_negative.
      ls_color-int = 0.
      ls_color-inv = 0.
      lr_column->set_color( ls_color ).
catch cx_salv_not_found.
endtry.
try.
lr_column ?= LV_SALV_COLUMNS_TABLE->get_column( 'VBELN' ).
ls_color-col = col_negative.
      ls_color-int = 1.
      ls_color-inv = 1.
      lr_column->set_color( ls_color ).
catch cx_salv_not_found.
endtry.
try.
*LV_SALV_COLUMNS_TABLE = gr_table->get_columns( ).
lr_column ?= LV_SALV_COLUMNS_TABLE->get_column( 'NETWR' ).
lr_column->set_short_text( 'Short' ).
lr_column->set_medium_text( 'Medium' ).
lr_column->set_long_text( 'Net Value' ).
*lr_column ?= LV_SALV_COLUMNS_TABLE->get_column( 'URL' ).
catch cx_salv_not_found.
endtry.
gr_table->set_screen_status( pfstatus = 'SALV_STANDARD'
report = sy-repid
set_functions = gr_table->c_functions_all ).
this statement actually does the display.
gr_table->display( ).
ENDFUNCTION.
FUNCTION Z_DISPLAY_FAKT.
s_name = 'S_VBRK'.
invoices in last 6 months
z_datum = sy-datum - 180.
import v_knvv from memory id 'CUST6A'.
get data
   select avbeln afkart avkorg afkdat
     b~netwr
      into corresponding fields of table t_vbrk
      up to 100 rows
         from ( vrkpa as a
          inner join vbrk as b
           on avbeln eq bvbeln )
        where a~kunde eq v_knvv-kunnr
        and a~parvw eq 'RG'
       and a~vkorg eq 'EN01'
        and a~vbtyp eq 'M'
        and a~fkdat gt z_datum.
sort t_vbrk by fkdat descending.
*data: gt_hyperlink type standard table of g_type_s_hyperlink.
Instead of if_salv_c_bool_sap=>false, you can pass the
value if_salv_c_bool_sap=>true to this method to
see your ALV as a list.
display data in Grid / List
TRY.
      CALL METHOD cl_salv_table=>factory
        EXPORTING
          list_display   = if_salv_c_bool_sap=>false
        IMPORTING
          r_salv_table   = gr_table
        CHANGING
          t_table    = t_vbrk.
    CATCH cx_salv_msg.
ENDTRY.
try.
LV_SALV_COLUMNS_TABLE = gr_table->get_columns( ).
lr_column ?= LV_SALV_COLUMNS_TABLE->get_column( 'NETWR' ).
      ls_color-col = col_negative.
      ls_color-int = 0.
      ls_color-inv = 0.
      lr_column->set_color( ls_color ).
      catch cx_salv_not_found.
endtry.
try.
lr_column ?= LV_SALV_COLUMNS_TABLE->get_column( 'VBELN' ).
ls_color-col = col_negative.
      ls_color-int = 1.
      ls_color-inv = 1.
      lr_column->set_color( ls_color ).
catch cx_salv_not_found.
endtry.
try.
*LV_SALV_COLUMNS_TABLE = gr_table->get_columns( ).
lr_column ?= LV_SALV_COLUMNS_TABLE->get_column( 'NETWR' ).
lr_column->set_short_text( 'Short' ).
lr_column->set_medium_text( 'Medium' ).
lr_column->set_long_text( 'Net Value' ).
*lr_column ?= LV_SALV_COLUMNS_TABLE->get_column( 'URL' ).
catch cx_salv_not_found.
endtry.
gr_table->set_screen_status( pfstatus = 'SALV_STANDARD'
report = sy-repid
set_functions = gr_table->c_functions_all ).
this statement actually does the display.
gr_table->display( ).
ENDFUNCTION.
FUNCTION Z_DISPLAY_MATERIAL.
s_name = 'S_VBAP'.
invoicesrs in last 6 months
z_datum = sy-datum - 180.
import v_knvv from memory id 'CUST6A'.
get data
select avbeln bmatnr barktx bnetwr b~kwmeng
into corresponding fields of table t_vbap
      up to 100 rows
from ( vakpa as a
          inner join vbap as b
           on avbeln eq bvbeln )
        where a~kunde eq v_knvv-kunnr
        and a~parvw eq 'AG'
       and a~vkorg eq 'EN01'
        and a~trvog eq '0'
        and a~audat gt z_datum.
TRY.
      CALL METHOD cl_salv_table=>factory
        EXPORTING
          list_display   = if_salv_c_bool_sap=>false
        IMPORTING
          r_salv_table   = gr_table
        CHANGING
          t_table    = t_vbap.
    CATCH cx_salv_msg.
ENDTRY.
try.
LV_SALV_COLUMNS_TABLE = gr_table->get_columns( ).
lr_column ?= LV_SALV_COLUMNS_TABLE->get_column( 'NETWR' ).
      ls_color-col = col_negative.
      ls_color-int = 0.
      ls_color-inv = 0.
      lr_column->set_color( ls_color ).
catch cx_salv_not_found.
endtry.
try.
lr_column ?= LV_SALV_COLUMNS_TABLE->get_column( 'ARKTX' ).
ls_color-col = col_negative.
      ls_color-int = 1.
      ls_color-inv = 1.
      lr_column->set_color( ls_color ).
catch cx_salv_not_found.
endtry.
try.
*LV_SALV_COLUMNS_TABLE = gr_table->get_columns( ).
lr_column ?= LV_SALV_COLUMNS_TABLE->get_column( 'NETWR' ).
lr_column->set_short_text( 'Short' ).
lr_column->set_medium_text( 'Medium' ).
lr_column->set_long_text( 'Net Value' ).
*lr_column ?= LV_SALV_COLUMNS_TABLE->get_column( 'URL' ).
catch cx_salv_not_found.
endtry.
gr_table->set_screen_status( pfstatus = 'SALV_STANDARD'
report = sy-repid
set_functions = gr_table->c_functions_all ).
this statement actually does the display.
gr_table->display( ).
ENDFUNCTION.
You can extend this as far as you like -- it's really easy and MUCH MUCH easier than the old way with fieldcatalogs etc etc.

If the pagecontainer_mc holds another movieclip that contains the button you are trying to target, then you need to include that loaded movieclip in the targeting. And if contacts is that movieclip, then you should be able to target it directly using...
var contacts:contatti = new contatti;
contacts.contacts_btn.addEventListener(MouseEvent.CLICK,showContacts);

How to get SAPGUI type (wingui or java) from an ABAP program

Hi everyone,
I am looking for a way to determine the sapgui type; that is if it is a wingui or javagui, from an abap program.
I know how to get the gui version with
CL_GUI_FRONTEND_SERVICES=>GET_GUI_VERSION
call and I also know how to get the platform with
CL_GUI_FRONTEND_SERVICES=>GET_PLATFORM
I simply want to determine if a certain sapgui running on a windows pc is a wingui or a javagui.
Any ideas?
Thanks,
Menelaos

Ok, I finally found it myself!
It is the function module:
RSAN_WB_TEST_GET_GUI_TYPE
at least on a 640 release.
Can I award me points?
Menelaos

Calling Corba Java from PLSQL

Hi,
My question is about calling java functions from PLSQL. What we have is in-house developed java classes registered at the TAO CORBA service on Unix platform. We developed a PLSQL package that calls other PLSQL functions and procedures without problem. We also need to call Java functions registered at the CORBA service. I know that calling standard Java functions is not problem via loading with loadjava and publishing as PLSQL procedure and functions. However, I found that CORBA is no longer supported starting from Oracle 9g r2. Still, I wonder wether there is a way to call these java functions registered at CORBA without loading and publishing? Any help will be greatly appreciated.
Thanx in advance,
Sincerely,
Asaf
Software Architect

Hi,
I would just like to mention that we decided to utilize TCP sockets in PLSQL utilizing the UTL_TCP package. Socket interface is also implemented at the Java module and hence we can call the related the interface functions via UTL_TCP socket interface. I hope this might help those who face a similar problem.
Sincerely
Asaf

Calling adobe form from webdynpro abap view

Hi,
I need some help. The situation is: I have created a Adobe form interface as well as a form using the SFP transaction. Now, I have a webdynpro screen with a button, which upon pressed must give the output of the PDF form.
I tried the following steps:
1. Call function 'FP_FUNCTION_MODULE_NAME'
2. Call 'FP_JOB_OPEN'
3. Call the generated function module name
4. Call FP_JOB_CLOSE.
The procedure works fine when I use the same code in a report program. It opens a dialog box where there is a option for Print preview and it displays the PDF.
But when I try to replicate the same, it does not work in Webdynpro for ABAP. Any suggestions as to how to go about this problem?
regards,
Praveen Kumar

Hi Praveen
there is documentation on the Web Dynpro for ABAP integration of Interactive Forms in the SAP Help Portal at http://help.sap.com/saphelp_nw2004s/helpdata/en/aa/940ee5331b4b8fa0a6cb6714dc5db4/frameset.htm which should answer most of your questions.
You specify the form to be used during the design of your Web Dynpro application (you are prompted to determine it when you insert the UI element).
You can save the form from the Reader toolbar, the question would be why would you want to do this and not use a proper download screen.
A proper tutorial is planned to be available in June. Until then, check the ABAP page in SDN for some e-learning / webinar recording), or directly here: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/c766e918-0b01-0010-99b1-c2b78cd059b3
Cheers,
Markus

CALLING BUSINESS OBJECT FROM AN ABAP REPORT

Hi friends,
           I have a business object to which a Custom Function Module is assigned in one of its method.This Function Module calls a Bapi to update a Service Order.I need to capture the status of Idocs regarding success or failure from the function Module in the ABAP Report.I would like to know if there is any way to call this business object from my report and get the status of IDOC.
Regards,
Dev Reddy

sorry I think i was not clear in explaining .I am calling a BAPI to update 'Priority' field of service orders in a custom function module(remote enabled) and I have assigned this bapi to a custom business object. Also I have developed an ALE interface thru BDBG transaction which automatically generates custom basic idoc type,messsage type ,Ale i/b and o/b function modules.
Actually my requirement deals with a report where we have list of service orders in an internal table and pass each service order to update Priority field.
Is there any way to create an IDOC from the report and update the priority field and pass back the status of IDOC.
I have tried calling ALE O/B function function module generated thru BDBG transaction in my report but as a result i am unable to get any of the message whether idoc is created or not.
Here is my report code.
data: it_methods type table of BAPI_ALM_ORDER_METHOD with header line,
      it_header type table of BAPI_ALM_ORDER_HEADERS_I with header line,
      it_header_up type table of BAPI_ALM_ORDER_HEADERS_UP with header line,
      RECEIVERS TYPE TABLE OF BDI_LOGSYS WITH HEADER LINE.
T_METHODS-REFNUMBER = '000001'.
IT_METHODS-OBJECTTYPE = 'HEADER'.
IT_METHODS-METHOD = 'CHANGE'.
IT_METHODS-OBJECTKEY = '000004000768'.
APPEND IT_METHODS.
CLEAR IT_METHODS.
IT_METHODS-REFNUMBER = '000000'.
IT_METHODS-METHOD = 'SAVE'.
APPEND IT_METHODS.
IT_HEADER-ORDERID = '000004000768'.
IT_HEADER-PRIORITY = '2'.
APPEND IT_HEADER.
IT_HEADER_UP-ORDERID = '000004000768'.
IT_HEADER_UP-PRIORITY = 'X'.
APPEND IT_HEADER_UP.
CALL FUNCTION 'ZZ_FM_SM_ORD_PRIOR_UPDATE'
EXPORTING
   OBJ_TYPE                      = 'ZBOSMPRUPD'
   SERIAL_ID                     = '0'
TABLES
    ITMETHODS                     = IT_METHODS
    ITHEADER                      = IT_HEADER
    ITHEADERUP                    = IT_HEADER_UP
    RECEIVERS                     = RECEIVERS
COMMUNICATION_DOCUMENTS       =
APPLICATION_OBJECTS           =
EXCEPTIONS
   ERROR_CREATING_IDOCS          = 1
   OTHERS                        = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks,
Dev Reddy

Call Proxy Java from Stores Procedures

Hi.
I'm starting with XI and I need know how call a Proxy Java (EJB) from store procedure (oracle).
Thank's

Hi,
Following weblogs will explain how to configure and call java proxy.
/people/rashmi.ramalingam2/blog/2005/06/25/an-illustration-of-java-server-proxy - Java Server Proxy
/people/prasad.ulagappan2/blog/2005/06/27/asynchronous-inbound-java-proxy - Inbound Java Proxy
Java Proxy-
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d
Rich set of Demos for proxy-
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/110ff05d-0501-0010-a19d-958247c9f798#xi [original link is broken]
Thanks,
Prateek

Function module to call an url from an ABAP program

Hello
I'm looking for the ABAP function module to open an internet explorer with an url as parameter. Could somebody help me ?
Many thanks
Jerome

Hi,
You can use 'CALL_BROWSER'.
Refer this code:
call function 'CALL_BROWSER'
exporting
url = 'C:Documents and SettingshemantgDesktopnew.html'
exceptions
frontend_not_supported = 1
frontend_error = 2
prog_not_found = 3
no_batch = 4
unspecified_error = 5
others = 6.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
Regards,
Gayathri

Calling an infoset from an ABAP program

Hi,
How can I call an infoset with ABAP code in order t build a report based on a program?
Thanks,
Tal

Hi Tal,
Give a try with LISTCUBE report RSDD_SHOW_ICUBE.
You may have to work more to get your requirement.
Sankar Kumar

Call WD Java from WD ABAP

Similar Messages

Maybe you are looking for