SOLMAN_SETUP issue

Dear experts,
i have updated my solution manager into EHP1 SP21 (abap + java) via spam/saint + jspm.
Now, i'm trying to make the initial configuration via transaction code SOLMAN_SETUP:
1/ i have created SOLMAN_ADMIN user + initial password + repeat initial password + ZSAP_SOLMAN_ADMIN authorization
2/ Abap configuration setup successfull
3/ J2ee configuration : when login with SOLMAN_ADMIN + initial password, it does not work.
Q1/ How could i resolve it?
4/ i tried to connect with j2ee_admin and it works : the initial client for abap instance is 001 but the user SOLMAN_ADMIN do not exists on this client.
Q2/ Is there any SAP official document to manage this configuration?
thank you very much for your help.
Any suggestion is welcomed.
Best regards,
Pascal.

Hello Gyan,
currently, i need to log with the user SOLMAN_ADMIN but the initial password i have set do not work.
Pascal.
Edit: i have check on the user administration and the user SOLMAN_ADMIN do not exists but it does on the ABAP system.
Do i have to create this user on the user administration (was java)? what authorizations do i have to affect? I though the initial configuration has created SOLMAN_ADMIN.
Edited by: Pascal TRAN on Feb 18, 2010 6:30 PM

Similar Messages

REG: Solman_Setup Issue in SOLMAN 7.1

Hi All,
I have installed SolutionManager 7.1 and when performing the solution Manager configuration using the solman_setup, in the phase managed system configuration, we are struck in step user creation, with the error " /SDF/READ_USER_ASSIGNMENT does not exist" so date transfer possible. Aslo in the last step when we click on finish button we are getting the below error.
Checked the service mentioned in the error from sicf tcode, it is active. Could some one help me on this issue.
The URL call http://indblrp2p05.ad.infosys.com:8002/sap/bc/webdynpro/sap/wdsise_wizard_app was terminated because of an error.
Note
The following error occurred in system SOL : Access via 'NULL' object reference not possible.
The error occurred on application server INDBLRP2P05_SOL_02 and in work process 9 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RESET of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: RESET of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: RESET of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: EXIT of program CL_WDR_CONTROLLER=============CP
Method: EXIT of program CL_WDR_VIEW===================CP
Method: EXIT_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: EXIT_CONTROLLER of program CL_WDR_INTERFACE_VIEW=========CP
Method: EXIT of program CL_WDR_CONTROLLER=============CP
Method: EXIT of program CL_WDR_VIEW===================CP
Method: EXIT_VIEW of program CL_WDR_VIEW_MANAGER===========CP

Hi Donald
Thanks for your response, we tried by assigning the roles mentioned by you and it worked for us.
But in the last step of Managed sysem configuration we are getting again the same error:
The URL call http://indblrp2p05.ad.infosys.com:8002/sap/bc/webdynpro/sap/wdsise_wizard_app was terminated because of an error.
Note
The following error occurred in system SOL : Access via 'NULL' object reference not possible.
The error occurred on application server INDBLRP2P05_SOL_02 and in work process 9 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RESET of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: RESET of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: RESET of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: EXIT of program CL_WDR_CONTROLLER=============CP
Method: EXIT of program CL_WDR_VIEW===================CP
Method: EXIT_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: EXIT_CONTROLLER of program CL_WDR_INTERFACE_VIEW=========CP
Method: EXIT of program CL_WDR_CONTROLLER=============CP
Method: EXIT of program CL_WDR_VIEW===================CP
Method: EXIT_VIEW of program CL_WDR_VIEW_MANAGER===========CP
When we checked in sap system we got the following dump :
Category               ABAP Programming Error
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
ABAP Program           CL_WDR_CONTEXT_NODE_VAL=======C
Application Component BC-WD-ABA-RUN
Date and Time          09.12.2011 21:26:16
Short text
     Access via 'NULL' object reference not possible.
could you please help us in this issue.
Thanks
Mounika

SOlman_setup issue at implement SAP Note Step

Hi Friends,
While i am performing the solman_setup (system preparation) facing once issue at Implement SAP Note step.
In this step while i am performing the post processing step (3rd step) giving the red signal The system only partially implemented the manual activities for note 1856234.
And i followed the note 1856234 as per the note i ran the report AI_CRM_ANALYZE_IBASE_SORTF and i got the error messages.
The Ibase component 000000000000003598 has deviceid: SID 00XXXXXXX
Sort string is needed!
Comp. with same device id:
Replace Sort string with (from LMDB):
The Ibase component 000000000000003272 has deviceid: SID 00XXXXXXX Etc.
Sort string is needed!
Comp. with same device id:
Replace Sort string with (from LMDB):
And as per the note
when i am executing IB_GEN i am getting below errors.
Object not found - will be created.
No changes made; Saving not allowed
Failed to save object % 1 (Object family 7001).
Kindly suggest on this.
Thank you,
Chowdary.

Please refer to SAP Notes 1694004 - Dealing with duplicate technical system names (SIDs) and 1747926 - Dealing with duplicate technical system names (old SLD)

SOLMAN_SETUP issue in J2EE config

Hi,
I'm configuring SOLMAN and in client 100 I'm runnign SOLMAN_SETUP and until step 3 of initial Configuration, everything was ok.
I've created the SOLMAN_ADMIN on the first step, then the ABAP config, and on the step 3 when I click to open the popup to put the Solman_admin pass, the password that I put gives the error Authentication failed.
I've done reset in SM using SU01, I've added SAP_ALL and SAP_NEW to the user and nothing works...
Any idea?
Note: I've tried with J2ee_admin and the answer is the same. Also with my user and the answer is the same... Where can I go to solve this?
Edited by: Pedro Taveira on Oct 6, 2010 6:27 PM

Hi
The 3rd step you mean Start J2ee config ,, here if you are getting the POP up for login and password then
you need to provide the J2EE_ADMIN and the password. the login and password is case sensitive so plz make sure
you are giving the right one ..
Best Regards
Jai Wardhna

SOLMAN_SETUP in SM701HP022 gives SLDDSUSER RFC_ERROR_LOGON_FAILURE issue

hell gurus
i am configuring : SAP EHP 1 for SAP Solution Manager 7.0 using transaction -SOLMAN_SETUP .its on the latest support packs SP5.
Initial Setup of SAP Solution Manager > Password Validation > Password and User Check SLDDS > Check existence of the user
userName : SLDDSUSER
InvokeService- Result: ERROR
InvokeService:Check existence of the user
Exception Class: com.sap.mw.jco.JCO$Exception
Exception Message: Name or password is incorrect (repeat logon)
Stack Trace
com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Name or password is incorrect (repeat logon)
at com.sap.ctc.util.infra.BaseRfcConfig.dispatchRfcException(BaseRfcConfig.java:338)
at com.sap.ctc.util.core.services.impl.ume.abap.UserAbapImpl.exists(UserAbapImpl.java:144)
at com.sap.ctc.util.core.services.impl.ume.DualUserImpl.exists(DualUserImpl.java:117)
at com.sap.ctc.util.core.services.content.ume.UserService.exists(UserService.java:61)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method
Our SM was at 4.0 and we upgraded it to 7.01EHP022. I have the user in ABAP as well as JAVA.
Any ideas are welcome

Hi,
This issue was resolved in thread SLDDSUSER com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE:
> " Hi, I have used client 001 and it doesnt come with that user problem.
So Tsungy Tadinos solved this error by using client 001
Hope this information is helpful and solves your problem too.
Regards,
Paul

Issue in ruuning the SOLMAN_SETUP

Hello,
We have solution manager 7.0 EHP1 with SP23 in our landscape which is newly installed
When i run the Tcode solman_setup it tries to open the webpage and it fails
It doesnt give any error message also.
Please let me know if you need more info to troubleshoot this issue.
Appreciate your quick response
Thanks & Regards,
Vadi

>
Vadivambal Paramasivam wrote:
> Hello,
>
>
> We have solution manager 7.0 EHP1 with SP23 in our landscape which is newly installed
> When i run the Tcode solman_setup it tries to open the webpage and it fails
> It doesnt give any error message also.
> Please let me know if you need more info to troubleshoot this issue.
> Appreciate your quick response
>
> Thanks & Regards,
> Vadi
Dear Vadi,
Can you please check with your network administrator if you can access the URL, because you maybe using proxy which stop you from doing so.
If this is not the case then the best solution is as follows:
Can you try executing the HTTP services within IMG Activity(via TRX 'SPRO' -> SAP Referance IMG ->
SAP Solution Manager -> Basic Settings - HTTP Services). The documentation is available as well in IMG.
Once this step is done try the Solman_setup transaction and it should work.
Regards
Amit

Performance Issue in Solution Manager

Hi experts,
Recently my solman had poor performance when I access solman_setup and configure the managed system. I have updated the database statistics as
http://scn.sap.com/thread/3294503, but the issue persists. I access SM50 and make s screenshot as blew:
It seems that the report CL_DIAGLS_LMDB_UTIL===========CP and CL_ACE_CONTROLLER=============CP didn't run normally. Could you please give me some advise and then I can have a check? Thank you very much.
Best Regards,
Pany Pan

Hi Rana,
Thank you for your reply, the system information is displayed as blew:
And the kernel release is 720_64_EXT_UC, patch 500.
Secondly, the MOPZ is used frequently, and the SLD of solman is down, too. Has it any relation with MOPZ? The note you mentioned above is applied for solman 7.0, so I think it's not available for my system.
There is one dump in ST22 today, as below:
Please give me some advise, thank you.
Regards,
Pany

"No valid RFC for the system VEP" in solman_setup in solman7.1

Hi Gurus,
     I've installed Solman 7.1. Configured STMS as single domain alone. STMS was successfull and the RFC was created and that also successfull. But in solman_setup, in system preparation phase, check STMS, its throwing the error "No Valid RFC for the system VEP".
          I tried deleting the RFC and recreating it, Deleting the STMS ans reconfiguring it, Tried 000, 001 and 100 client, Restarted the SAP server, Restarted the OS lvel also. But nothing works. I've searched but no solution works. Please suggest me what might be the solution for this.
   And also I need to configure the MOPZ in solman 7.1. Please guide for that, since i've not doone in 7.1 and everything in this was new.
Thanks and Regards,
Santhosh Kumar.

Issue resolved by activating single system landscape in STMS.
Regards,
Santhosh Kumar.

Managed System Configuration Super User Issue

Hi folks ,
I have a strange error in Solman SP8 Managed System Config .
In Step 5 : "Enter System Parameters" , for entering super user , it throws an error even though the user credentials are valid.
This happens for some of the managed systems only . The error says : " Issue with connection to system <SID> <Client>".
It does not seem to be using the right RFC and I feel it is checking for the user in 000 client , regardless of which client we give . Because if we give 000 credentials it works.
Please help . As without this I cannot save any of the system parameters like Load Balancer URL etc.
Thanks,
Shaswat

I have seen this exact issue when my IE cached the page and was stuck with the client 000 RFC's selected on step 3. I just exit managed sys config and clear my cache and start solman_setup again. To avoid this all together I set my IE to check for newer versions of stored pages every time I visit page. (under internet options -> general -> browsing history -> tempory internet files)
Then
In step 3 create the user to avoid security issues or auditor problems later on. This way the SM_ADMIN_XXX will have the proper roles required. Please note (The user is not authorized to use a Trusted RFC (authorization object S_RFCACL). To authorize the user, assign the role SAP_SM_S_RFCACL manually).
Confirm there is no error and hit next. For an explicit save.
Now go to step 5 and select the client that the RFC's were created on and hit test credentials.
This should solve your issue.

Error in Solman_setup of Solman 7.1 sp11

Dear All,
I have installed new solman 7.1 and upgrade to sp11.
I have created new client and client copy done by from 000 client.
I started the solman_setup configuration.
While doing system preparation getting error web dispatcher step.
I got struck here from one day onwards.
For your reference i attached screen shots and suggest some solution for this....
Regards
Chandra

Hi,
After doing client copy from 001 and doing solman_setup but same error.
Please give me some solution for this..
I followed sap note 1822831 - Web Service Soap Errors in solman_setup.
But it is not useful for me.
i am able follow that sap note SM_INTERN_WS user is not loging to java system.
"Trying to logon manually with SM_INTERN_WS onto the Solution Manager java stack (eg System Info page) may also help to reproduce the issue, which may in some cases, be due to a misconfiguration of the Java UME."

SOLMAN_SETUP - Managed System Configuration - DBA_COCKPIT

Dear SAP Colleagues,
I am currently implementing SMD in my Solution Manager system. I use the guided procedure SOLMAN_SETUP. The first 2 phases - Initial and Basic Configuration are completed.
I have starting the 3rd one - Managed System Configuration - Manual Configuration.
I have started the "Configure DBA Cockpit".
I have no problem with most of my managed systems (ERP, BI, EP)..
But when I want to configure the DBA cockpit for my PI systems, I get error.
Even if I personnaly there is nothing to do with the SAP Product, I get an error when I want to configure my all 3 PI system in DBA Cockpit.
1. I select the Managed System in my list
. The DB Host Name is automatically filled out.
. The DB Name is automatically filled out.
. The Schema Name (Optional) is also automatically filled out.
2. Then I click on Next button and I get this error :
The DB connection is no successfully tested.
Please make sure the parameters below are correct and hit ....
Database Name : XDS
Datbase host : xdsci
TNS Name : ???
User Name : SAPXDS
Password : ???
Question :
1. From where (SLD or SMSY) these information (Database Name, Database Host, TNS Name ...)
related to managed system XDS are uploaded ?
In other terms, where are these technical information pre-configured ? In SLD ? In SMSY ?
2. How may I fix this issue ? I did not configure the other managed system and it perfectly works.
Thanks in advance for your help
Best regards
CP

Hi,
I found this OSS Note : 1265070
You can also connect directly to this link :
https://websmp207.sap-ag.de/~sapidb/011000358700000074392009E
Best regards
CP

SOLMAN_SETUP - managed system configuration

I am attempting to use the SOLMAN_SETUP transaction to establish the managed system connections to my ABAP ECC systems. I enter the required user/password info and execute it. I get one error message in the log that says "Cannot get fully qualified name of the server as400q3". The as400Q3 server is the host where the managed system resides. I do not know where to fix this issue.
Best regards,
Russ

Hi ,
You have to mention it in Txn. SMSY- Server->as400q3->Fully qualified host name.
Also, Please make sure the host file entries are maintained correclty on your solman server.
Hope this helps.
Kindly revert if you face any issues.
Thanks,
Jagan

Solman_setup - Managed System Configuration - ST-PI plugin not up-to-date

Hi,
I have a problem with configuring managed systems in Solution manager using txn solman_setup. When I select the managed system, enter all the data for the READ destination, TMW destination and Back destination and click "Maintain Connection" the system comes back with message:
ST-PI Plugin not up-to-date for managed system IVE, see note 1274287
When I check the OSS note and my managed system I see that my managed system is already on the right required level for SAP Solution Tools Plug-In which is: ST-PI 2008_1_700.
I did check also for service packs but these do not yet exist.
Can someone help me with this issue?
Next list shows current version of the managed systems:
SAP ECC 6.0
SAP ABA 700 Sp 13
SAP Basis 700 SP13
St-PI 2008_1_700 SP 0
PI-Basis 2005_1_700 SP 13
SAP BW 700 SP 15
SAP AP 700 SP9
ST-A/PI 01l_ECC600 SP 0

I did finally resolve my problem with input from OS which is listed below.
You're using the latest version of ST-PI. There's no patch levels
available to download in this moment. To solve this issue I ask you to
first apply the latest version of this note below. Please, read
carefully step by step this note below and follow all the procedures.
Number 1172948
Short text SAP Solution Manager - Basic functions
After you applied the central note, I ask you to apply these notes belowWhen you had all these notes applied, this issue will be solved.
Number 1274287
Short text End-to-End Diagnostics SP18
Number 1244225
Short text Solution Manager 7.0 EhP 1: recommended
corrections
Please, apply the latest patch level for lmservice too.

Solution Manager 7.1 SP4: Session Timeout during SOLMAN_SETUP

Hello Experts,
We recently installed Solution Manager 7.1 SP4 on Linux/Oracle. We also completed the System Preparation and Basic Configuration part of the SOLMAN_SETUP wizard as well (which includes applying the Central Correction Note and other steps).
During the Managed System Setup Part, as soon as we click on the Configure System for a managed system - a new window opens up and immediately we get the below timeout messages:
This session will terminate due to inactivity in 0:00 minutes
To continue working in this session, choose 'Continue Session'
The above is immediately followed by the actual session timeout message:
This session terminated due to inactivity.
Click Close Popup
or to start new session, press F5.
Now even if we press F5/Refresh, the same cycle repeats.
I already checked the ICM timeout parameters as mentioned in the Guide and further findings with regards to ITS update as in thread WEBGUI Timeout immediately after logging in
Applying the latest kernel patch also did not help. The strange issue is that the session timeout occurs only the LMDB related services, wherease normal services like WEBGUI etc work fine.
Please suggest if anyone came across this issue, especially after update to SP04.
Thanks and Regards,
Srikishan

Hi,
Thanks, I will check the note steps and close this thread accordingly.
Perhaps I need to hone my notes searching skills !
Regards,
Srikishan

SM 7.0 EHP1 SR1 - solman_setup initial configuration - No execute authority

I am performing the initial configuration step of SOLMAN_SETUP, when I receive the error below.
Error: E 002 No execute authority
Step: Get ABAP System Info
This occurs when I click the "Start J2EE Configuration" button on the J2ee Configuration screen(Step 3). This opens another browser window, where I enter the solman_admin user that was created in an earlier step. On the first screen, I enter the
Solution Manager Administrator(solman_admin), J2EE Administrator(j2ee_admin) user/password, as well as the password for the Technical Users (SLDDSUSER, etc).
The script then starts and stops on step 5 of 118, with the error shown above. Below is the output from the link provided on the error window. It is not clear to me, what execute authority is missing and for which user. Any suggestions on where to look for further details about this error, or possible solutions would be appreciated. Thanks.
InvokeService:Get ABAP System Info
Library: sap.com/tc~lm~config~bs
SourcePath ./com_sap_sld70x_scenario_simulate/process/process_2/S_TCC_LMCFG_LIB_GET_SYSINFO_Minimal
Time 2011/03/22 at 12:41:32
WSDL service/NW/AbapServer/S_TCC_LMCFG_LIB_GET_SYSINFO_Minimal.wsdl
Destination
<Destination name="ABAPHost" subtype="message" type="JCOConnection"> <JCOConnection><host>SUZUKI</host><user>SOLMAN_ADMIN</user><password>% secure content %</password><sysnr>00</sysnr><sapnr>001</sapnr><lang>en</lang></JCOConnection></Destination>
Destination parameters
user : SOLMAN_ADMIN
password : % secure content %
host : SUZUKI
sysnr : 00
client : 001
language : en
function name: S_TCC_LMCFG_LIB_GET_SYSINFOInput
<Input/>
InvokeService- Result: Error
Duration:734 ms
SourcePath./com_sap_sld70x_scenario_simulate/process/process_2/S_TCC_LMCFG_LIB_GET_SYSINFO_Minimal
Refresh Env. Messages: false
Output
<S_TCC_LMCFG_LIB_GET_SYSINFOOutput xmlns:system="http://sap.com/ctc/systeminfo"> <CLIENTS/> <SAPRL/> <LOGSYS/> <LOGSYSTEXT/> <SID/> <OPSYS/> <RETURN> <BAPIRET2> <TYPE>E</TYPE> <ID>SCTC_API</ID> <NUMBER>002</NUMBER> <MESSAGE>No execute authority</MESSAGE> <LOG_NO/> <LOG_MSG_NO>000000</LOG_MSG_NO> <MESSAGE_V1/> <MESSAGE_V2/> <MESSAGE_V3/> <MESSAGE_V4/> <PARAMETER/> <ROW>0</ROW> <FIELD/> <SYSTEM>SMXCLNT001</SYSTEM> </BAPIRET2> </RETURN> <CLIENT/> <COMPONENTS/> </S_TCC_LMCFG_LIB_GET_SYSINFOOutput>
Regards,
Russel Robbins

Thanks to all for the suggestions.
I first reviewed note 1451426, but the changes discussed in that note, were already present in my system.
I then performed a trace while repeating the error, but I did not find any trace output (at first). I then added SAP_ALL and SAP_NEW to users SOLMAN_ADMIN and J2EE_ADMIN (just in case), and repeated the initial configuration step. After adding these profiles, the step completed successfully.
One additional note, after reviewing the trace information closer, I did find the failing object that was causing the issue originally (see below). This occurred for user SOLMAN_ADMIN. The other option would have been to add this object/value to one if the roles in use, as Ragu had suggested.
S_CTC      RC=4 ACTVT=16;
Also, I noticed that in the trace, the only users reported were SOLMAN_ADMIN, SAPJSF and SLDAPIUSER, so the profiles were definitely not needed for user J2EE_ADMIN.
Thanks again for the suggestions from everyone.
Regards,
Russel

SOLMAN_SETUP issue

Similar Messages

Maybe you are looking for