Called Screen using BDC Call and Submit

Hi there
while returning back from the Called Screen using BDC Call , i am not able to get the Basic Screen. It displays The Selection Screen of the called Transaction.
Kindly plz help me regarding this problem
Thanks
Saurabh

Which Transaction are you calling?
Regards,
Deepa Kulkarni

Similar Messages

Can anyone list problems/errors when uploading data using BDC's and BAPI's?

Can anyone list the problems/errors when uploading data using BDC's and BAPI's?

Hi,
If you are actually creating a BDC to load data pls be more specific.
Data format incorrect. Tab delimited/ etc
Dates in wrong formats
Currency incorrect formats
Missing screens
Wrong transaction code
File not found,
Missing Mandatory fields,
Screen resoultion.
You should always use refresh for your Bdcdata table.
Loop at internal table.
refresh Bdcdata.
regards,
sowjanya.

Call transaction using bdc tab and also skip first screen??

Hi,
Please help.
I want to call transaction PA30 fill it with values which are determined only at runtime and then skip first screen.
The screen doesn't have parameter fields so i cannot use 'set parameter id'.
I also cannot create a transaction with parameters as I only have these at runtime.
Anyone done anything like this???

hi,
you might be populateing the itab bdc_tab with the corresponding values fronm the recording.
while doing the recording go until to the screen wher u want to finsih.
and populate the bdc_tab wit the ok code,screen number and the value.
this will do.
for eg see the code below.
METHOD analyze_log.
DATA : wrk_extid TYPE balhdr-extnumber.
DATA : wrk_date(10) TYPE c.
DATA : it_rspar TYPE TABLE OF rsparams .
DATA : wa_rspar TYPE rsparams.
DATA: it_bdcdata TYPE STANDARD TABLE OF bdcdata,
      wa_bdcdata TYPE bdcdata.
DATA: params TYPE ctu_params.
CONSTANTS : object TYPE balhdr-object VALUE 'ZKIV_LOG'.
IF wa_kopf-vertr_nr IS NOT INITIAL.
    CONCATENATE wa_kopf-vertr_nr '/' wa_kopf-nachtr_nr INTO wrk_extid.
    wrk_date = '01.09.2006'.
    SET PARAMETER ID 'BALOBJ' FIELD object .
    SET PARAMETER ID 'BALEXT' FIELD wrk_extid.
    wa_rspar-selname = 'ALDATE'.
    wa_rspar-sign = 'I'.
    wa_rspar-kind = 'P'.
    wa_rspar-option = 'EQ'.
    wa_rspar-low = wrk_date.
    APPEND wa_rspar TO it_rspar.
ELSE.
    CLEAR wrk_extid.
    SET PARAMETER ID 'BALEXT' FIELD wrk_extid.
ENDIF.
Update BDC tab
--Call SLG1 using BDC--&
params-dismode = 'E'. "Show errors only
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSLG3'.
wa_bdcdata-dynpro   = '0100'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'BALHDR-ALDATE'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BALHDR-ALDATE'.
wa_bdcdata-fval = wrk_date.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = '=SELE'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSLG3'.
wa_bdcdata-dynpro   = '0100'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = '=&F03'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_SUBSCR'.
wa_bdcdata-fval = 'SAPLSBAL_DISPLAY                        0101SUBSCREEN'.
APPEND wa_bdcdata TO it_bdcdata.
CALL TRANSACTION 'SLG1' USING it_bdcdata OPTIONS FROM params.
--End of BDC--&
ENDMETHOD.
here wat i m doing is that i dont want the subscreen 101 to be displayed..
Message was edited by:
        Sandeep S

PC Screen and TV Screen using Mini DP and Mini DVI

Good evening everyone,
I bought my MacMini in April of 2009 and connected my 19" PC Screen using the Mini-DVI to VGA Adapter, everything works great. Last month, I bought a new Samsung TV and connected it to the MacMini, using a VGA Splitter. However, the quality on both screens suffers, so I wondered whether it would make a difference if I use the Mini-DVI port for the PC Screen and the Mini-DisplayPort for my TV.
So, does it make any difference concerning the quality?
Thanks
Steven

I have my Mini hooked up to to screens.
1. 23" Apple HD Cinema Display
2. 40" Sony Bravia
The Apple display is hooked up using the mini DVI to DVI adapter.
The Sony is hooked up using the mini DisplayPort to DVI adapter.
Both displays have a great picture with no quality loss that I can see.
I would suggest using the mini DVI and the mini DisplayPort for what you want.
You can get adapters for both ports that will go to the VGA if thats what you want or need.
http://store.apple.com/us/browse/home/shopmac/macaccessories/cables?mco=MTM3NjUwNTI

Blank Screen using Win 10 and power cord

I have just upgraded to Windows 10 (and beginning to regret it).The screen operates fine on battery but as soon as I plug the power cord in the screen goes blank.I have check the screen brightness in the settings and it is on or near max.Please help (and try not to make it too technical).

According to the error message you have posted I suspect there could be a hardware issue on your Notebook.
I strongly recommend you to immediately Contact HP Technical Support over the Phone for further assistance
without any delay to get your Notebook diagnosed and serviced by an authorized HP Certified Engineer
You can also Check your warranty Here to verify the warranty status
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
I work on behalf of HP

Skip the selection screen using BDCTAB call transaction

Hi experts,
I am using BDCTAB for call transaction SWI1 I need to skip the selection screen. Can you please tell me how to skip the selection screen using BDC call transaction?
Thank you in advance.....

hi,
the first step is to pass some values to the selection screen, at least Date From and Date To; otherwise, it´ll take a long time. The second step is to emulate the Execute button, which is done with '/08'.
PERFORM fields USING 'BDC_OKCODE' '/08'.
Third step is to catch the programme and screen number.

Using BDC in Webdynpro ABAP

Hai All,
      I am currently working on HR req.
        I hav to upload my data form my webdynpro screen to Infotype 267.
          Can I use BDC recording and program to upload it to the infotype???
           Please give ur suggestions....
Thanks in advance.
Nalla.B

Nalla ,
You can use standard FM to upload data to infotype . get the attributes from webdynpro applicattion . pass it to the below FM in a action tigger .
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
        EXPORTING
          infty         = '0267'   " pass infotype
          subtype       = p_record-subty
          objectid      = P_record-objps
          number        = p_record-pernr     "employeenumber
          validityend   = validityend
          validitybegin = validitybegin
          record        = p_record
          recordnumber = p_record-SEQNR
          operation     = INS "insert
          nocommit      = nocommit
          dialog_mode   = '0'
        IMPORTING
          return        = return_struct
          key           = personaldatakey
        EXCEPTIONS
          OTHERS        = 0.
regards
chinnaiya
Edited by: chinnaiya pandiyan on May 24, 2011 4:42 PM

How to use BDC recording in Workflow.

Hi experts,
Anyone kindly help me for the following case...
If sales order gets created, mail has to be sent to every user. Also for that sales order, delivery should be created in background and again mail has to be sent to all users...
I m clear with sending mail. but i m struggled while creating delivery in background. i dont know how to do this. I hav an idea that it can be created using BDC recording and this recording program can be called in our method which is created in our business object.
How to create a single BDC recording to create sales order as well as creating delivery in background... Is it possible to do like this. Or is there any function module to create delivery in background with respect to sales order number?
kindly give some suggestion and step by step procedure to do this...
Thanks in advance...
Regards
Raaams...

Hi Ram
Check this BAPI once BAPI_OUTB_DELIVERY_CREATE_SLS.
If this doesnt help do BDC recording and create a FM with the help of BDC recording. Please note that Call Transaction should happen in background otherwise your BDC wont work.
Please revert back if you have any queries.
Regards,
Gautham Paspala

Customizing FD01 and FB70 using PS Class and Characteristics

Hello SAP Experts
I have the following issue:
My client has a requirement where we need to customize the Customer Master (FD01) screen and the Invoice Posting Screen (FB70). A few additional fields have to be added by creating a separate tab. I was intending to take Abaper's help and do this using user exits but I have been suggested by the cleint to use SAP PS Class and Characteristics feature to do this. Can someone please throw some light on this feature and how can i create custom fields on FD01 and FB70 screens. Is there a way we could customize these screens using PS class and characteristics. Your opinions would be much appreciated.
Please kindly give your suggestions. Thanks in advance
Regards,
Nik

Joao Paulo,
Thank you for the response. I have tried to obtain some info from OSS but no luck. Tried all means but there is limited information available.
Nik

I used to see my contacts' photos full screen when they called or when I called them now I only see a thumbnail when they calling and when I call them?

I used to see my contacts' photos full screen when they called or when I called them now I only see a thumbnail when they calling and when I call them?
iPhone 4s iOS 7.1

Hello User909807,
After having some close calls with fraudulent purchases on my own bank account, I know how scary it can be to know someone else other than you had your personal information, so it was nice to know my issuing bank was helping keep my identity safe. Having said that, it’s completely understandable why it’d be frustrating to discover you were unable to continue making purchases after confirming your identity via text, and I apologize if this caused any unintentional frustration.
While I’ll be sure to document your feedback regarding our partnership with Citibank, N.A., please know that they are the issuer of your My Best Buy credit card account. As such, I will be glad to share your concerns with our Citibank contacts so that they may contact you to discuss your account in further detail. Please know you should receive follow-up contact from them within the next 3-5 business days.
Respectfully,
Alex|Social Media Specialist | Best Buy® Corporate
Private Message

My screen is on and I can see calls and texts coming in but I cannot use touchscreen. It is frozen and won't move. What can I do?

My iPhone is on and I can see calls and texts coming in but I cannot use the touch screen. It is frozen. What can I do?

Basics from the manual are restart, reset, restore.
Have you tired all three of these options?
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Ok my iphone 3g touch screen is not responding, i can recieve calls and it can charge and connect to itunes, but i cannot go any further than using the home button or the power button, but the slide feature and touch feature is non existent

ok my iphone 3g touch screen is not responding, i can recieve calls and it can charge and connect to itunes, but i cannot go any further than using the home button or the power button, it is only the slide feature and touch feature that has become non existent. Also, i have a f'ew cracks in my screen for a while now and it was running smoothly up until saturday when i sat on it applying large amounts of pressure to the phone screen. Is there a way i can fix this myself without having to recover my phone to factory settings or wasting 50 bucks to get it fixed??

Hi Dire Dawa,
If the screen on your iPhone isn't responding, you may find the following article helpful:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Regards,
- Brenden

Phone 5 freezes at lock screen but control centre and answering calls woriks, to work again i should press lock button then it works normally and freezes again if i leave it for 1min or less icant understand what problem isit,restored in dfu,normal no use

phone 5 freezes at lock screen but control centre and answering calls woriks, to work again i should press lock button then it works normally and freezes again if i leave it for 1min or less icant understand what problem isit,restored in dfu,normal no use i still have problem please try to sovle it

i tried it but no use
i restored it as new device and kept it idle over night but no use

I want in LSMW SAME CODING. THIS IS USING BDC CALL TRANSACTION

REPORT ZXX_BDC_PRA NO STANDARD PAGE HEADING LINE-COUNT 20
                                            LINE-SIZE 150 .
Program Name :ZXX_BDC_PRA                             *
Object Id     :                                        *
Develper Name : praveen                                *
Start Date    : 25.06.07                               *
Description   : uploading flat file to sap system      *
*--structure for Data Uploading.
DATA: BEGIN OF IT_STR ,
        VKORG LIKE RF02D-VKORG,
        VTWEG LIKE RF02D-VTWEG,
        SPART LIKE RF02D-SPART,
        KTOKD LIKE RF02D-KTOKD,
        NAME1 LIKE KNA1-NAME1,
        SORTL LIKE KNA1-SORTL,
        ORT01 LIKE KNA1-ORT01,
        PSTLZ     LIKE KNA1-PSTLZ,
        LAND1 LIKE KNA1-LAND1,
        SPRAS LIKE KNA1-SPRAS,
        END OF IT_STR.
*--Internal Table for Data Uploading.
DATA: ITAB LIKE IT_STR OCCURS 0.
*--Internal Table to sucessfull Records.
DATA:   ITAB1 LIKE IT_STR OCCURS 0.
*--Internal Table to Store Error Records.
DATA:    ITAB2 LIKE STANDARD TABLE OF IT_STR WITH HEADER LINE.
*--Internal Table for Storing the BDC data.
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA:   MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA:   COUNT TYPE I VALUE 1,
        S VALUE 0, E VALUE 0.
Selection screen *
SELECTION-SCREEN BEGIN OF BLOCK b1
                 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_FILE TYPE IBIPPARMS-PATH.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
*functionality to use drill down list
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
    IMPORTING
      FILE_NAME     = P_FILE.
Start-of-selection *
START-OF-SELECTION.
DATA FILENAME TYPE STRING.
FILENAME = P_FILE.
*-- Form to upload flatfile data into the internal table.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                = FILENAME
      FILETYPE                = 'ASC'
      HAS_FIELD_SEPARATOR     = 'X'
    TABLES
      DATA_TAB                = ITAB
    EXCEPTIONS
      FILE_OPEN_ERROR         = 1
      FILE_READ_ERROR         = 2
      NO_BATCH                = 3
      GUI_REFUSE_FILETRANSFER = 4
      INVALID_TYPE            = 5
      NO_AUTHORITY            = 6
      UNKNOWN_ERROR           = 7
      BAD_DATA_FORMAT         = 8
      HEADER_NOT_ALLOWED      = 9
      SEPARATOR_NOT_ALLOWED   = 10
      HEADER_TOO_LONG         = 11
      UNKNOWN_DP_ERROR        = 12
      ACCESS_DENIED           = 13
      DP_OUT_OF_MEMORY        = 14
      DISK_FULL               = 15
      DP_TIMEOUT              = 16
      OTHERS                  = 17.
*--Generating the BDC table for the fields of the internal table.
LOOP AT ITAB INTO IT_STR.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0107'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'RF02D-KTOKD'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD       USING 'RF02D-VKORG'
                                  IT_STR-VKORG.
    PERFORM BDC_FIELD       USING 'RF02D-VTWEG'
                                   IT_STR-VTWEG.
    PERFORM BDC_FIELD       USING 'RF02D-SPART'
                                  IT_STR-SPART.
    PERFORM BDC_FIELD       USING 'RF02D-KTOKD'
                                    IT_STR-KTOKD.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0110'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNA1-SPRAS'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD       USING 'KNA1-NAME1'
                                IT_STR-NAME1.
    PERFORM BDC_FIELD       USING 'KNA1-SORTL'
                                    IT_STR-SORTL.
    PERFORM BDC_FIELD       USING 'KNA1-ORT01'
                                    IT_STR-ORT01.
    PERFORM BDC_FIELD       USING 'KNA1-PSTLZ'
                                  IT_STR-PSTLZ.
    PERFORM BDC_FIELD       USING 'KNA1-LAND1'
                                  IT_STR-LAND1.
    PERFORM BDC_FIELD       USING 'KNA1-SPRAS'
                                    IT_STR-SPRAS.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0120'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNA1-TXJCD'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0125'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNA1-NIELS'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0360'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNVK-NAMEV(01)'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=ENTR'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0310'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNVV-BEGRU'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0324'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNVP-PARVW(01)'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=ENTR'.
*--Calling the transaction 'Vd01'.
    CALL TRANSACTION 'VD01' USING BDCDATA MODE 'N' UPDATE 'S'
    MESSAGES INTO MESSTAB.
    PERFORM MESSAGES.
    REFRESH : BDCDATA, MESSTAB.
ENDLOOP.
END-OF-SELECTION.
*--Populating the Success records internal table.
IF ITAB1[] IS NOT INITIAL.
format color 5.
    WRITE: /'SUCCESSFUL RECORDS'.
    format color off.
    LOOP AT ITAB1 INTO IT_STR.
      WRITE:/ IT_STR-VKORG,IT_STR-VTWEG,
              IT_STR-SPART,IT_STR-KTOKD,
              IT_STR-NAME1,IT_STR-SORTL,
              IT_STR-ORT01,
              IT_STR-PSTLZ,
              IT_STR-LAND1,
              IT_STR-SPRAS.
      S = S + 1.
    ENDLOOP.
REFRESH : ITAB1.
    WRITE:/ 'TOTAL RECORDS',S.
ENDIF.
*--Populating the error records internal table.
IF ITAB2[] IS NOT INITIAL.
FORMAT COLOR 3.
    WRITE :/ 'ERRORS RECORDS ARE'.
FORMAT COLOR OFF.
    LOOP AT ITAB2.
      WRITE:/ ITAB2-VKORG,
              ITAB2-VTWEG,
              ITAB2-SPART,ITAB2-KTOKD,
              ITAB2-NAME1,ITAB2-SORTL,
              ITAB2-ORT01,
              ITAB2-PSTLZ,
              ITAB2-LAND1,
              ITAB2-SPRAS.
        E = E + 1.
    ENDLOOP.
REFRESH : ITAB2.
    WRITE: / 'TOTAL RECORDS',E.
REFRESH : ITAB2.
ENDIF.
End of Selection *
END-OF-SELECTION.
TOP-OF-PAGE *
TOP-OF-PAGE.
WRITE:/ SY-ULINE.
WRITE:/10 'REPORT ID',21 SY-REPID,35 'USERNAME',46 SY-UNAME,
60 'SYSTEM DATE',70 SY-DATUM,80 'SYSTEM TIME',90 SY-UZEIT,
100 'PAGE NO',108 SY-PAGNO.
WRITE:/ SY-ULINE.
FOrm to Populate the BDC table.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO   = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.                    "BDC_DYNPRO
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> SPACE.
    CLEAR BDCDATA.
    BDCDATA-FNAM = FNAM.
    BDCDATA-FVAL = FVAL.
    APPEND BDCDATA.
ENDIF.
ENDFORM.                    "BDC_FIELD
*&      Form messages
FORM MESSAGES .
LOOP AT MESSTAB.
    IF MESSTAB-MSGTYP = 'I'.
     WRITE : / MESSTAB-MSGV1.
    ELSEIF
MESSTAB-MSGTYP = 'S'.
      INSERT LINES OF ITAB FROM COUNT TO COUNT INTO TABLE ITAB1 .
      COUNT = COUNT + 1.
     WRITE : / MESSTAB-MSGV1.
    ELSEIF
    MESSTAB-MSGTYP = 'E'.
      INSERT LINES OF ITAB FROM COUNT TO COUNT INTO TABLE ITAB2.
      COUNT = COUNT + 1.
     WRITE : / MESSTAB-MSGV1.
    ENDIF.
ENDLOOP.
ENDFORM.                    " messages

Hi
Go through the doc and do the same using LSMW
BDC is the way to transfer data by writing a batch input program which can use either session or call transaction method.
LSMW used to transfer data without/less code.
What type of data we transfer using LSMW?
LSMW is best suited for transferring master data.
Actually BDC and LSMW are not comparable at all.
for example LSMW itself can use BDC as a way of mass data transfer.
BDC is a mass data transfer technique via screen logic of existing SAP Data entry transactions. It behaves as if you are manually making thousand of entires into sap system as a background job. And that is probably the reason why BAPI's are preffered over BDC's.
On the other hand LSMW is a tool to facilitate DATA migration from other legacy systems ... It contains step by step procedure for data migration.
Like Managing Data Migration Projects , Creating Source Structures , Mapping Source structures wid Target structures , etc etc
LSMW internally might well be using the following techniqes for data transfer..
1. IDOX
2. Direct Input / BDC
4. BAPI's
LSMW is an encapsulated data transfer tool. It can provide the same functionality as BDC infact much more but when coming to techinical perspective most the parameters are encapulated. To listout some of the differences :
LSMW is basicaly designed for a fuctional consultant who do not do much coding but need to explore the fuctionality while BDC is designed for a technical consultant.
LSMW offers different techinque for migrating data: Direct input ,BAPI,Idoc,Batch input recording. While bdc basically uses recording.
LSMW mapping is done by SAP while in BDC we have to do it explicitly .
LSMW is basically for standard SAP application while bdc basically for customized application.
Coding can be done flexibly in BDC when compared to LSMW
1. Maintain Attributes:
Here you have to choose the second option and you can do the recording how this should work. Then assign the same to the Batch Input Recording name.
2. Maintain Source structure:
Create a structure name
3. Maintain Source field:
In this you have to create a structure same as that of the input file
eg: name
age
4. Maintain structure relations:
This will link the structure to the input file.
5. Maintain field mapping and conversion rules:
Here is the place where you can do coding, depending upon the code you have written or assignment you have done the values will get picked up from the file and get processed.
6. Maintain field mapping and conversion rules:
If you have any fixed values you can define here.
7. Specify files:
Specify the input file path and type.
8. Assign files:
This will assign ur file to the Input file
9. Read Data:
This will read ur data from teh file.
10. Dispaly Read Data:
You can see the uploaded data
11. Convert Data
This will convert the data to the corresponding format for processing
12. Display Converted data:
13. Create batch input session
Here this will create a batch input session for processing
14. Run Batch Input session:
By clicking on the session and process the same you can do teh needfu.
http://www.sapbrain.com/TOOLS/LSMW/SAP_LSMW_steps_introduction.html
http://esnips.com/doc/8e732760-5548-44cc-a0bb-5982c9424f17/lsmw_sp.ppt
http://esnips.com/doc/f55fef40-fb82-4e89-9000-88316699c323/Data-Transfer-Using-LSMW.zip
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
http://esnips.com/doc/7582d072-6663-4388-803b-4b2b94d7f85e/LSMW.pdf
for Long texts Upload
Please take a look at this..
http://help.sap.com/saphelp_erp2005/helpdata/en/e1/c6d30210e6cf4eac7b054a73f8fb1d/frameset.htm
Reward points for useful Answers
Regards
Anji

Reg Vendor master upload using BDC Call Transaction Method

Hi All,
Thanks in advance.
I am uploading vendor master data using bdc call transaction method for XK01. In that i am getting an error message that the fields " smtp_addr" ( for email) and "time_zone" (for time zone) doesnot exist on the screen '0110' ( this is the second screen) . the field timezone will be displayed on the screen only when we go for communications button and select the URL field .
Do anybody have the solution for this problem. if possible can you give me the code for that screen.

Create a recording via SM35 (menu go to=>recording), this will generate automatically the code for filling your bdcdata-table...

Called Screen using BDC Call and Submit

Similar Messages

Maybe you are looking for