Caller ID displayed on TV set activation question.

I have 1 multi-rm DVR, 2 HD cable boxes and 2 STB. If I want to activate the caller ID feature to display on my TV do I need to activate the feature on each cable box?
Solved!
Go to Solution.

kouya wrote:
I have 1 multi-rm DVR, 2 HD cable boxes and 2 STB. If I want to activate the caller ID feature to display on my TV do I need to activate the feature on each cable box?
Hello,
Yes, caller ID has to be activated on each set top box, and it takes 24-48 hours to see the alerts after activation.
First thing, though, as per walt178 has said, is to check for availability of caller ID based on your current services.
Also, there are some standard STBs that are not compatible with the caller ID feature.
For additional details on caller ID including set-up steps, please see the below link:
http://www22.verizon.com/Support/Residential/Tv/FiosTv/General+Support/Account+Issues/QuestionsOne/1...
There is also a Caller ID Troubleshooting wizard if you run into any issues:
From the FiOS TV remote: Menu -- Customer Support -- In-Home Agent -- Caller ID TroubleShoot
Hope this helps!

Similar Messages

DFS question: What does "Set Active" mean on the DFS tab in windows server 2008

When I logged into server and went to the DFS tab to check and see if it was replicating between two of the different shares. I saw one share marked as "Active" What does that mean?
I also seen a button that said "Set Active" I am guessing its related to my above question.
I am guessing its the root? The directory that others pull from or something? I tried to google that all over and could not find anything specific to this question which I found very odd.

If you have multiple folder targets in the namespace then the 'Set Active' button is how you change the current referral (at a client level). Only enabled folder targets will be listed. Users can choose a different server if they wish (maybe
for performance reasons).

How to tell if REQ1 is set active high

Hi I am using the 6533 PCI-DIO-32HS card in a PC with traditional DAQ, looking at an existing design. I could not find how to tell if REQ1 is set active high or low, guessing it would be set up in the DIO confg vi.

thanks for the additional information, yes will have to wait for the external hardware. I did have a general question about the 6533 data and control line outputs using traditional DAC. I think for this design it is set up as a pattern IO transfer using internal REQ and an internal clock set up as a VI input, (DIO START). Anyhow I am monitoring the card outputs with a logic analyzer and it looks like an 8 element array (of 8 bit integers) is being used for the data input (to the DIO WRITE VI) with the first 4 elements being written out on DIOA0-A7, DIOB0-B7, DIOC0-C7, and DIOD0-D7 followed by the last 4 elements also written out to DIOA0-A7, DIOB0-B7, DIOC0-C7, and DIOD0-D7. Anyhow it looks like the clock input to the (DIO Start VI) controls the pulse width of the data. It looks like REQ1 goes high approximately 78 microseconds before the first 32 bits are written out followed by 5 microseconds of data (with the clock set at 200k), finally followed by the second data group (5 microseconds of data). It then looks like REQ1 stays high for 2-4 ms after the second group of 32 bits is written out before going low. Anyhow if you are trying to clock this data into a storage device I would expect to see rising clock edges when both the first and second group of data appear on DIOA0-A7..DIOD0-D7. I monitored all the other control lines pclk1,2 ack1 and did not see signal levels other than 0, again I do not have the DIO card connected to anything except a logic analyzer. Would you know if it is typical to use REQ1 as a clock input to a storage device or if this can be done?

Mac Book just displays a folder icon with question mark

Hi! My mac does not turn on, it just displays a folder with a question mark. What should I do?
Btw, I've just turned it on in a country with a lower power supply, can this be the problem? I'm kind of desperate by now.
Thank you. [email protected]

Carla
Welcome to the forums here. You might also want to check out Mac Forums they're great too The credits are secondary, just want to be able to help if I can. I'm sorry the hardware test did not start for you. I know sometimes reading the forums and seeing other issues may cause one to worry, it worries me too, but if this is your first issue with your MB don't have any worries. I'm pretty sure your warranty will apply. If have any problems with that and can call a toll free number to the states 800-275-2273. Here's a link with Apple numbers.
Joseph

How to stop the call summary display on home screen?

How to stop the call summary display on home screen?

Here are the solutions I can think of (if no one here responds with something better):
1. Open Settings and then Phone within the Settings screen and see if you can find a setting there for the call summary. The Phone submenu under Settings would be the most likely place.
2. Open Settings on your iPhone and go through each item including all of the items within each main item. Within about 10 minutes you should be able to get through all of the settings and find the setting if it exists on your phone. There is no such setting on my phone but it is possible that Airtel has a custom menu with that.
3. If you still haven't found it, you could check a) Airtel's support site and/or b) an Airtel specific forum.
4. If still no luck, I would call Airtel and ask again and if you get the same response ask for the location of the setting (or to speak to someone who can tell you).
Good luck.

Configuring Call Pickup and Busy Lamp Field - SIMPLE QUESTION UNANSWERED

In configuring BLF do I need to declare a station name ? The name should be only one at the entire network or could double if the ext/ usr is different ?
c. Enter the following string in the Extended Function field:
fnc=blf+cp;sub=Stephanie@$PROXY;ext=300@$PROXY
Using the following syntax:
fnc=type;sub=stationname@$PROXY;ext=extension#@$PROXY
where:
- fnc: function
- blf: busy lamp field
- cp: call pickup
- sub: station name
- ext or usr: extension or user (the usr and ext keywords are
interchangeable)
Thanks in advance !
Regards

Hi Jerry,
The second button option is the only way I can see this working because the BLF feature is only meant to monitor Busy/Idle Directed call park slots and does not have the access prefix assigned. For example;
User A has a directed call park slot 88 assigned to him/her as a button on the BLF.So when they use this feature they are really speed dialling 88.
When someone wants to retrieve this call that was parked by User A they must dial the directed call park prefix that you set up (example 21) plus 88 (2188).
When User A tries to retrieve the call by pressing the same button they originally used they are really dialling 88 again and thus get the"call park slot unavailable" message.
You would need to setup a second button with the 2188 prefix+park slot for this to work properly.
Here is an excerpt from the documentation;
"User cannot retrieve parked calls. After dialing the directed call park number to retrieve a parked call, the user receives a busy tone, and the IP phone displays the message, Park Slot Unavailable.
Ensure that the user dials the retrieval prefix followed by the directed call park number."
Hope this helps!
Rob
Please remember to rate helpful posts....

Forcing Users to set Security Questions

Hi All,
Currently when a user joins the organization, the user can go to IdM user interface, login and set security questions. But this is an option only if user wants to use self service in IdM. So, it has been found that users are not setting it and it becaomes a pain when they call help desk for password change and help desk is not able to verify the user's identity because security questions are not set.
Please share your thoughts how other organizations are handling this situation.
Is there any way that we can force a user to set security questions when the user logs in first time?
Regards,
Gaurav

Hello,
In our Organization we did the following.
Under the Security tab there is a Policy tab.
There you should find a policy called: Default Identity Manager Account Policy.
Under Secondary Authentication Policy Options make sure "Enforce Answer Policy at Login" is checked.
In page help states:
Select this option to enforce the authentication question policy when the user logs in to this interface.
This solution works however it did become problematic while we had pass-thru authentication configured.
All the best
-IDMxml

Set Active Directory Folder Permission

We have added a Lion server to an active directory domain, however I cannot determine how to set Active Directory permissions on shared folders on the Mac. Ideally we want our windows users to access shared folders on the Mac however we would like to lock them down so we can restrict some users.
Is anyone able to point me in the right direction?
Thanks in advance.

Similar Discussion:
How i can update thumbnailPhoto AD attribute with powershell?
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/403cda19-7a63-4d95-a273-8f7885e836cd/how-i-can-update-thumbnailphoto-ad-attribute-with-powershell?forum=ITCG
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Resource Tab Create/delete/Display role is not active

Dear Friends,
I have been trying to work on cprojects 4.0, i encountered one issues. I tried exploring all the threads on the forum related this issue, but i could not find any resource related this issue.
in Resource Tab Create/delete/Display role is not active, they are grayed out.
I have maintained all the authorization
1. Roles for my user id are:
SAP_CPR_PROJECT_ADMINISTRATOR
SAP_CPR_PROJECT_LEAD
SAP_CPR_USER
i also have SAP_ALL
0SAP_ADMIN Project Role 'Administration'
Default Authorization : ResMan,Write
Z13_CONSULTANT Consultant
Default Authorization : ResMan,Write
Z13_DEVELOPER Developer
Default Authorization : ResMan,Write
Z13_PROJEKTLEIT Project Manager
Kindly request your valuable inputs.
Thanks and Regards
Mukesh

Hi Mukesh,
Please go to following SPRO setting:
Collaboration Projects -> Resource management -> Qualification Management -> Activate Qualification Search and Matchup Using WFM Core
Delete the X under Value abbr. for Group WFM and Sem. abbr. QUINC. This will deactivate use of WFM.
Hope this resolves your problem.
Regards,
Niraj

OnNet CLID - Forwarded Call Information Display

All of the phones below are 79xx phones within the same cluster, same partitions and with the same CSSes.
Phone A forwards all of his calls to Phone C.
Phone B calls Phone A, but sees the alerting name and extension for Phone C on his display.
Under the line configuration, Forwarded Call Information Display, the only items checked are Caller Name and Dialed Number. How can I get Phone B to see Phone A's information even though Phone A is forwarded to Phone C?
Thanks,
Tim

for 4.13 SR3C, there is no option for manipulating the CLID information during a Call Forward between IP Phone calls.
if you have an IP Phone call through a QSig gateway (ISDN), then there are parameters in the 'service parameters' section of ccmAdmin that can be set.
(this does not seem like the case in your environment)
to make this work in your environment, you'll have to setup the phone C with the alerting/numbers you want displayed to phone A, when it calls phone B while cfwd'd to phone C.
(not a real good solution and not recommended for obvious reasons)

I need help resetting my security questions, i try to and it says email sent but i never get the email to my main email or alternate email, i never set my questions but somehow there set

I need help resetting my security questions, i try to and it says email sent but i never get the email to my main email or alternate email, i never set my questions but somehow there set, so i can also not buy apps without entering my question awnsers please help

Forgotten Security Questions/Answers
You need to contact Apple by:
1 - Use the Express lane and start here:
https://expresslane.apple.com
then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
or
Apple - Support -form iTunes Store - Contact Us
2 - Call Apple in your country by getting the number from here:
http://support.apple.com/kb/HE57
or
Apple ID: Contacting Apple for help with Apple ID account security
3 - Use your rescue email address if you set one up
Rescue email address and how to reset Apple ID security questions
For general information see:
Apple ID: All about Apple ID security questions

Nokia 5800 XM Caller ID Display

Hi
I have a Nokia 5800 XM and have noticed that on the caller ID display, when making, receiving or whilst on the call, the display shows the Name and Number of the contact who is called/calling. Is there any way which I can change this so that the caller ID only displays the Name of the contact calling as opposed to both?
I've been though the settings, scanned through the user guide and can't find any reference to this...
Any help would be much appreciated.
Regards
younusb

Sorry, I did not observe it in my earlier phones as in all, it must be set to display both...
I think, there is no such option on Nokia 5800 (shame!!!).. but you may try some 3rd party Caller ID applications which may give you what you want... just Google for it..
If you are successful, pl. post your feedback here...
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

The method 'commit' cant be called when a global transaction is active.

Hello,
I've installed the SOAdemo a couple of times on local machines, and it works fine. Now I've deployed the SOADemo on a separate server and a strange error occurs in BPEL when testing the SOADemo.
The SOAOrderBooking BPEL process runs into an error at the GetOrderId process:
================================
file:/C:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_SOAOrderBooking_1.0_937b09d1bd8dae1b33b028b2871aef63.tmp/OrderSequence.wsdl [ OrderSequence_ptt::OrderSequence(OrderSequenceInput_msg,OrderSequenceOutputCollection) ] - WSIF JCA Execute of operation 'OrderSequence' failed due to: DBWriteInteractionSpec Execute Failed Exception.
unknown failed. Descriptor name: [unknown]. [Caused by: The method 'commit' cant be called when a global transaction is active .
; nested exception is:
     ORABPEL-11616
=================================
I am using SOA Suite 10.1.3.0 and Database 10201, deployed on Windows.
Can anybody tell me what can cause this problem?
Thanks in advance,
Regards Leon

Hi,
Hi, I am getting the same error using ESB Database Adapter.
My faultstring is:
========================
oracle.tip.esb.server.common.exceptions.BusinessEventRetriableException: An unhandled exception has been thrown in the ESB system. The exception reported is: "oracle.tip.esb.server.common.exceptions.BusinessEventRetriableException: An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: esb:///ESB_Projects/my_ESB/myAdapter.wsdl [ myAdapter_ptt::myAdapter(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'myAdapter' failed due to: DBWriteInteractionSpec Execute Failed Exception.
unknown failed. Descriptor name: [unknown]. [Caused by: The method 'commit' cant be called when a global transaction is active.]
; nested exception is:
     ORABPEL-11616
DBWriteInteractionSpec Execute Failed Exception.
unknown failed. Descriptor name: [unknown]. [Caused by: The method 'commit' cant be called when a global transaction is active.]
Caused by Exceptoin [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.DatabaseException
Belső kivétel: java.sql.SQLException: The method 'commit' cant be called when a global transaction is active.Error Code: 0.
==========================
(BTW, what has 'commit' to do with a procedure that is only reading the database?)
Regards,
Patrik

My tel Goes after 10 minutes offline, apears à enige Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1

My tel Goes after 10 minutes offline, apears à enige Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1

Hi Richard,
You mentioned that 'Apple put the AirPrint spec out there for all printer makers'. I've been looking around but I haven't found any spec. Where did you find it?
Do printer makers have to buy a license in order to be able to advertise that they've implemented the AirPrint protocol? Is there maybe an Apple review process in place?
TIA
Geert

My tel Goes after 10 minutes offline, apears à white Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1

My tel Goes after 10 minutes offline, apears à white Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1

Hi Richard,
You mentioned that 'Apple put the AirPrint spec out there for all printer makers'. I've been looking around but I haven't found any spec. Where did you find it?
Do printer makers have to buy a license in order to be able to advertise that they've implemented the AirPrint protocol? Is there maybe an Apple review process in place?
TIA
Geert

Caller ID displayed on TV set activation question.

Similar Messages

Maybe you are looking for