Caller IT to the TV Alert message pop-up delay
Is it me or is the Caller ID to TV feature very flaky? Generally when the alert does not show I do the following steps to correct:
Disable
Re-boot DVR
Enable
At it magically comes back.
Now I have a different problem - the caller ID alert appears about 2 minutes AFTER the call comes through - rendering this feature useless. I re-set the router and no change - all TV's 3 SD and 1 HD show the alert about 2 minutes after the call comes in.
Any help out there? Thanks
Solved!
Go to Solution.
There is a delay. Engineers are working on it. now. No ETR at this time.
Similar Messages
-
when i try syncing my phone a alert message pops up saying "this iphone cannot be used because the apple moblie device service has not started" what do i do?
Read here:
http://support.apple.com/kb/TS1567 -
when i try syncing my phone a alert message pops up saying "this iphone cannot be used because the apple moblie device serivce has not started" what do i do?
Read here:
http://support.apple.com/kb/TS1567 -
An alert message pops up upon opening saying could not initiate application security component, and it says to check to see if profile has no read/write restrictions. Than when it opens all of my saved passwords are gone, I use a master password and its disabled. When I try to enter in a new on e it says can't change password. I can't even open yahoo e-mail says that my ssl security is down but when I check it its clicked. I'm just very confused as to whats going on.
== This happened ==
Every time Firefox opened
== 5/14/2010 ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5See [[Could not initialize the browser security component]]
Rename (or delete) secmod.db (secmod.db.old) in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case there is a problem with the file. -
After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes". So, now after the upgrade, I cannot access iTunes. How do I resolve this??
Thankszepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
I have just installed Lightroom 5 on iMAC (OS X ver 10.9.4). When I click on 'Import' to start working on some photos, the following error message pops up: "An internal error has occurred. Could not find namespace: AgCreativeCloudUtils". Anyone know what the problem is and how to fix? Thanks.
https://forums.adobe.com/search.jspa?q=Could+not+find+namespace%3A+AgCreativeCloudUtils&pl ace=%2Fplaces%2F1383621&depth=…
-
Looking for a SQL query to get all the possible Alert Messages from the Rules in a Management Pack
For reporting, I'm looking to get a SQL query of all the possible Alert Messages for Rules configured in a Management Pack (not necessarily the ones that have thrown alerts). I can do this for Monitors, but not for Rules.
The configured alert messages for the Management Pack Monitors
go like this: ManagementPack > MonitorView> RuleModule > RuleModule.Alert Message > Localized Text
The configured alert messages for the Management Pack Rules
should go something like this, but there is a missing link: ManagementPack > RuleView > RuleModule > ? Missing Link ? > Localized Text
The Rules are tied to the Module, but I don't see a connection from the RulesModule to the Alert Message that I see in the LocalizedText. The Rule names do not always equal the Alert name.
Can someone provide the missing link?Hi,
please try below powershell code to find the corresponding management pack for specific alert:
$Alert = get-scomalert | where {$_.Name -like 'Agent Proxy Not Enabled*'} | select -first 1
If ($alert.IsMonitorAlert -eq "True") {
write-host "Ths is a monitor-generated alert"
get-scommonitor -ID $Alert.MonitoringRuleID | select Enabled, DisplayName, ManagementPack
else
write-host "This is a rule-generated alert"
get-scomrule -ID $Alert.MonitoringRuleID | select Enabled, DisplayName, ManagementPack
In addition, please also refer to the below link:
http://blogs.technet.com/b/mazenahmed/archive/2011/12/02/using-powershell-to-map-opsmgr-active-alert-to-its-corresponding-rule-monitor-and-management-pack-name.aspx
Regards,
Yan Li
Regards, Yan Li -
<blockquote>Locking duplicate thread.<br>
Please continue here: [/questions/811301]</blockquote><br>
Whenever a website or javascript pops up an alert message, Firefox4 now completely greys out the site. How do I turn this retarded feature off? Also how do I get my status bar at the bottom of the window back? Another retarded design decision.You can look at the pref <b> prompts.tab_modal.enabled</b> to false on the <b>about:config</b> page.
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br /> -
Crystal Reports Alert message pop-up not appearing in InfoView/BO Mobile?
Hi,
I am testing conditional alerts of a crystal report in BOBJ Mobile application. The application is supposed to show a pop-up for the alerts whenever the condition set inside the report document is met, with the creation of any instance in InfoView (the document is scheduled.)
The application is not showing up any alert pop-up.
Moreover, InfoView itself does not seem to show any pop-up alert message (the way Crystal Reports client is showing up in design env) for that particular instance of the report. The alert details are, though, only displayed in the 'instance details' option in InfoView. No pop-up on opening of that particular instance, and also on refreshing that report itself. May be InfoView is designed to manage alerts that way..
How the way should I create my alerts in crystal report as to make them appear as pop-ups in InfoView on instance opening/report refresh. And then, in turn, in my BOBJ Mobile application.
Thanks in advance if anyone can tell some way out for the requirement. This is very imp to us.
NirmitHi Don,
The reason for me to post this thread in Crystal Reports was to get information on how the way the alerts needs to be configured in Crystal Reports as to make a pop-up for them to appear while viewing the instance of the report from InfoView or refreshing the report itself in InfoView. -
I have installed OS6 on my iPhone 4. A new App is Passbook. When I click on the App Store bar at the bottom of the Passbook page a message pops up saying Cannot connect to iTunes Store. That's wrong isn't it? It should not be trying to connect to the iTunes Store but to the App Store?.
It should be telling you to download the latest iTunes on your computer... you can't install iTunes on your iPhone.
-
When i try to down load apps alert message pop ups cannot connect to itunes
When i try yo download apps in my iphone 5 . I always received alert message cannot connect to itunes
Hi Kley_ds,
If you are having issues connecting to the iTunes Store to download apps to your iPhone, you may find the following article helpful:
Apple Support: Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
- Brenden -
When I open Adobe Bridge, the following error message pops up: OLSException in OLS Adapter Startup
Within the box, underneath the heading of the error message is: /OLS/develpment/main/bridge/3.2.0/build/mac/../../sdk/src/COLS.cpp#19: 16
A little more info. What version of PSE? Did you just upgrade to 10.8? Did you do any housekeeping after doing so?
-
My son's ipod touch 3 screen shows a USB cable image and ask to connect to the itune. Itune does not connect with the message shows: this device is locked and can not be connected to the itune before you unlock it" I have no idea how to turn on this device and how to connect this to the itune, any help is highly appreciated.
Try to get it to recognize it by using DFU Mode. Then restore.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
I have the iphone 5S and it doesn't seem to even connect to my macbook because when i connect it to my phone, a message on my laptop shows that I have to install he new version of itunes on my phone. How on earth do I do that??? I Already have the latest version of itunes installed on my laptop already.
It should be telling you to download the latest iTunes on your computer... you can't install iTunes on your iPhone.
-
I googled and downloaded a free version in my mac but halfway of it being downloaded, I was informed it cannot be properly installed as it is running in my program? Is there a built in Word for Mac. I have never been a Mac user so everything is new to me.
Allan Eckert wrote:
There is OpenOffice and NeoOffice which are free
NeoOffice is not totally free. You can download it for free, but I had to switch my mom away from NeoOffice to LibreOffice because NeoOffice started nagging for payments to be able to download updates.
In fact NeoOffice is now in the Mac App Store for $9.99.
Maybe you are looking for
-
Getting "oops and loading at top of screen". Loading goes to 1 and back to63 or30 or 10 or whatever
Details are in Question box
-
How can I change the name of my home directory?
When I first set up my Macbook Pro a year ago, I put my first and last name. I didn't like this and later changed the login name to just my first name, but the "home" directory is still listed as my full name on the side panel in Finder windows. How
-
Windows crashs when playing music with iTunes
Hi, I have a problem with my iTunes. Since last week my Windows crashes when I start to listen to music over iTunes. I have already tried to re install Windows and have updated all the drivers for my hardware but there has still nothing changed. When
-
Need to find out the Cost center for one location, one cost center
/* Formatted on 2015/02/27 08:34:29 AM (QP5 v5.215.12089.38647) */ SELECT DISTINCT cost_centre -- INTO l_cost_center FROM ( SELECT DISTINCT --pap.name position, haou.organization_id org_id,
-
I am creating certificates for my program and they need to be able to use a mail merge to insert the names onto the certificates. I am trying to create the certificates in Word but it never works right for me. Is it possible to an InDesign file or