Calling 64-bit TestStand Engine from 32-bit LabVIEW

I am creating my own TestStand user interface in 32-bit LabVIEW but I want to use the 64-bit TestStand Engine. I can't find a way to specify this. The read-only API property "Engine.Is64Bit" is coming back false when I run from my UI, but when I run from the Sequence editor, it comes back true. How is this determined and set at startup???

I dont think you can build a 64 bit TestStand interface using a 32 bit Labview.
FYI the the 32 bit User interface code is stored at :
C:\Users\Public\Documents\National Instruments\TestStand 2014 (32-bit)\UserInterfaces\Full-Featured\LabVIEW
The 64 bit user interface code is stored at :
C:\Users\Public\Documents\National Instruments\TestStand 2014 (64-bit)\UserInterfaces\Full-Featured\LabVIEW
You have build a 32 bit TestStand user interface and the is64bit is properly showing as false.
Try building the same project using 64 bit Labview (which should automatically pickup 64 bit TestStand components)
When you say that you run from seqeunce editor - i think you mean 64 bit sequence editor.
Ofcourse once you build your 64 bit user interface you can call a 32 bit vi (only in adapter mode set to dev and not run time).
Hope this helps.
Ravi

Similar Messages

Query 32 bit Access Database from 64 bit Sql Server

Hi All,
I have a task to query the Accessdb from Sql Server and below are the configuration details:
OS: Windows Server 2008 R2 Enterprise( 64 bit)
Sql Server: Sql Server 2012 enterprise (64 Bit)
Access : MS Office 2010 (32 bit)
I used the below queries to reap the data from access db.
SELECT * FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0','D:\Product.accdb', Product) AS Product
(or)
SELECT * FROM OPENROWSET('MICROSOFT.ACE.OLEDB.12.0','D:\PRODUCT.ACCDB', PRODUCT) AS PRODUCT
following error returnd from both queries.
Error: "Msg 7438, Level 16, State 1, Line 2. The
32-bit OLE DB provider "Microsoft.Jet.OLEDB.4.0" cannot be loaded in-process on a 64-bit SQL Server."
Please help.
Ram MSBI Developer

not sure if anyone is watching this thread anymore but i have this scenario. i am using the excel connection manager in SSIS to create an excel spreadsheet with VS 2012. To do this from what I have read I am required to use the 32-bit driver for "Microsoft
Access database engine 2007", if I use the 64-bit driver I cannot connect to the Excel connection manager. i get 0xc020801c message.
i can install the 32-bit "Microsoft Access database engine 2007" and resolve this problem. but i also have a stored procedure that creates a spreadsheet (i use this because i have to leave some cells intact), it appears to require the
64-bit "Microsoft Access database engine 2007". in 32-bit mode i get the following message
Msg 7438, Level 16, State 1, Procedure sp_CreateGRfile, Line 26
The 32-bit OLE DB provider "Microsoft.ACE.OLEDB.12.0" cannot be loaded in-process on a 64-bit SQL Server.
so i need both the 32-bit "Microsoft Access database engine 2007" and 64-bit "Microsoft Access database engine 2007".
any thoughts on getting around this issue?

Trouble connecting to 64 bit oracle client from 32 bit environment

Hi,
I have an application which connects to Oracle and an external 3ed party application via a set of APIs. We are now facing the issue while migrating our server from 2003 to 2008.
The 2003 server was configured for 32 bit and had 32 bit Oralce installed on it. It was able to connect to both Oracle and the 3ed party API in this configuration
In our New 2008 server we have installed a 64 bit Oracle however the 3ed party API is using is 32 bit. Once we use the 64 bit app poll we were able to connect to the Oracle, but the API connection fails. When we enable the 32 bit in APP Pool, wer cant connect to the Oracle client.
Could you please suggest a possible soultion for this problem?
PS:
We have tried placing the 32 bit Oracle.Data.Client DLL in the Bin folder and refered it in our project ( to avoid refering the 64 bit DLL from GAC) but this method didint work out.
We have alos tried placing Oracle Data Access Componets DLLs in Our bin as explianed in the following blog post
http://researchaholic.com/2011/10/21/connect-from-net-to-oracle-without-installing-the-oracle-client/
This also did not help us connect to the Oracle client.
Right now we have configured our new 2008 server with 64 bit oralcle client and enabled 32 bit support from APP pool.
Thanks

You can't use 64 bit client on 32 bit machine.
You can use 32 bit client on 64 bit machine via syswow64, but not the other way around.
If you compile your app with AnyCPU compile target though, it will automatically run as 32 bit on 32 bit OS, and 64 bit on 64 bit OS.
HTH
Greg

Problems connecting to 32 bit msaccess database from 64 bit 11G

Here is the issue:
I have a 9i (32 bit windows) database with an hsodbc connection to an an older access database so once schema can see & copy data from said access database, all works fine.
I'm getting ready to move the database to 64 bit 11.2.0.3 on windows 2008 64 bit server, database is migrated and tested ok.
The problem is with the dg4odbc connection, I have created connections for AS400 databases and they're ok, but I set up an ODBC to the access database, using the 32 bit ODBC interface as MS recommends, but I still keep getting this error:
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Microsoft][ODBC Driver Manager] The specified DSN contains an architecture
mismatch between the Driver and Application {IM014}
ORA-02063: preceding 2 lines from RADERDB
According to MS technet this is from not using the c:\Windows\SysWOW64\odbcad32.exe to set up the ODBC connection, but I did use that executable, when I use the regular 64 bit ODBC admin I can't even see msaccess drivers to begin with.
The funny thing is, when I point the tnsnames.ora entry to the old 9i server, it uses that ODBC connection and then the 11G dblink then works fine. However this is a band-aid solution and I want to get everything working from the new production database server.
Any suggestions?
thanks in advance..

The message means that you're using a 32bit ODBC driver with a 64bit program. That does not work. If you want to connect with the 64bit DG4ODBC you need to use a 64bit ODBC driver. There's a package available from the Microsoft Technet sites (AccessDatabaseEngine_x64 - http://www.microsoft.com/en-gb/download/details.aspx?id=13255 ) that ships 64bit ODBC drivers for their Excel/Access programs.
Please be aware that installing 32bit gateway products on 64bit Windows is NOT supported.
- Klaus

Oracle upgrade from 32-bit Oracle 9i to 64-bit Oracle 10g (Windows 2003 R2)

Hello Gurus,
Existing I have SAP R/3 4.7 200 Oracle 9i Windows 2003 32bit
I want to upgrade Hardware to x86 EMT64bit
I would like to upgrade to 64-bit Oracle 10G from 32-bit Oracle 9i. runs on Windows 2003 32bit. Target DB is Oracle 10G on x64 Windows (EMT64 hardware) on Windwos 2003R2 64bit. & Add Solution manager to new System
Please give me any advise which is the better way of upgrading Oracle 10g. Or better yet, please advise a safe way of upgrading to Oracle 10g from 9i
Please guide me about request shipping DVD For This Solution to my site
Many thank in advance
Kuekul

Hi
You can download Oracle 10g from service market place www.service.sap.com>downlaods>Installations and Upgrades-->
Installations and Upgrades - Entry by Application Group>SAP NetWeaver>SAP NetWeaver7.0>Installation and upgrade>windows server-->oracle check for below software and download it
EXE 51031678_1 ORACLE RDBMS 10.2 Windows 1 of 5
RAR 51031678_2 ORACLE RDBMS 10.2 Windows 2 of 5
RAR 51031678_3 ORACLE RDBMS 10.2 Windows 3 of 5
RAR 51031678_4 ORACLE RDBMS 10.2 Windows 4 of 5
RAR 51031678_5 ORACLE RDBMS 10.2 Windows 5 of 5
ZIP 51033272 ORACLE 10.2 Client
ZIP 51036971_2 ORACLE RDBMS Patch 10.2.0.4 Windows Server on IA32 32bit
ZIP 51036971_3 ORACLE RDBMS Patch 10.2.0.4 Windows Server on IA64 64bit
ZIP 51036971_4 ORACLE RDBMS Patch 10.2.0.4 Windows Server on x64 64bit
Regards
Uday

Test Stand: TestStand Engine Process

I'm looking into an application (written by someone else of course) which calls a "Test Stand Engine" to execute a test.
First thing is what is this "Test Stand Engine" ?
I have been using Test Stand GUI (Test Stand Sequence Editor) to execute such test cases in the past so I never knew what do they mean by Test Stand Engine.
The problem i'm looking into is simple.
They say that Test Stand Engine is being executed as part of a thread and my task is to make it execute in a process.
But I Can't find the actual call to test stand engine itself.
I'm on Windows box and all I can see in Task Manager => Process is TSAUTO~1.EXE which is same whether I run GUI or my application with Test Stand Engine.
What should I look for in my application code to find the "Test Stand Engine"?
Any Help?
Nirvana

Hi,
just to clarify that - there's two approaches to making an operator interface with TestStand.
1) Use the TestStand UI controls and manager controls or 2) Go directly to the TestStand Engine.
Option 1 actually overwraps the calls to the TestStand Engine anyway to make it easier to implement an operator interface. That's not to say that going directly to the TestStand Engine ActiveX automation server is difficult, but you have to do certain things, like shutting down in a sepcific way.
Your best other resource is the TestStand help (rather than the bookshelf pdf's) and have a look at the topic about "Writing an application with the teststand engine"
As Dennis says - you might get more help on the TestStand forums rather than the LabVIEW ones though.
Thanks
Sacha Emery National Instruments (UK)
Message Edited by SachaE on 02-22-2007 10:26 AM
// it takes almost no time to rate an answer
Attachments:
teststandHelpSection.JPG ‏55 KB

How to evaluate 64 bit return code from realtime sequence

Hello,
I'm using the ExecuteAsync method of the StimulusProfile Class to execute a stimulus profile. The stimulus profile only contains one entry: A call to a realtime sequence.
After the profile has finished executing I retrieve the return code of the realtime sequence by opening the result XML-File.
The xml-node of intrest might light look this:
<TestResult ID="ReturnValue">
<TestData>
<Datum xsi:type="unsignedInteger" value="2147516544" xmlns="http://www.ieee.org/ATML/2006/Common" />
</TestData>
My problem is that the "value" attribute seems to be limited to 32 Bit. The upper 32 Bit of my 64 Bit return code are simply cutoff. How do I get the complete return code?
After I ran into this problem when using the .NET API, I tried to do a "NumericBoundsCheck" evaluation using the Stimulus Profile Editor. As expected, it doesn't work correctly when working with values > 2^32 - 1.
I'm using VeriStand 2012.
Thanks

Hello Gregor,
I don't think it's necessary to post example code. Just return a value >= 2^32 from a realtime sequence and you will see that the evaluation in the realtime stimulus editor does not work correctly. Also, in the resulting XML-File, the return value will be truncated to 32 Bit.
Meanwhile I have found that this this issue has already been discussed on this board (http://forums.ni.com/t5/NI-VeriStand/ATML-return-value-does-not-return-Uint64/m-p/2848796#M3649), but no solution was proposed so far.
I now run my realtime sequence using the ClientAPI. This allows me to evaluate the full 64Bit.
Regards
Krid

LabVIEW 2009 SP1 Run-Time Engine (Minimum) (32-bit) for Windows - Supported Features

Hi,
Can some one please point out what features are supported by the LV RTE (Minimum ) [LabVIEW 2009 SP1 Run-Time Engine (Minimum) (32-bit) for Windows]
1) Is there a limit on the size of the exe which can be run on it?
2) Will this support additional modules like DAQ etc.,? Or do we have to chose the regular installer ( 170 Mb ) for that purpose?
3) If a list of what it does or does not support is available, it would be extremely helpful.
Thanks In advance.
Regards,
Vijay

Anand,
I did go through both the links that you had sent earlier before posting on the forum. For eaxample refer the following link where it says,
http://joule.ni.com/nidu/cds/view/p/lang/en/id/1599
It does not contain the full run-time engine, but will allow some executables to run.
1) What do they mean by 'some' executables. Is there a list of yay's and no's available?
2) Can someone from NI reply to this and shed more knowledge?
Regards,
Vijay

SQL Server 2012 64 bit - reading data from dbf (DBase 3/4/5 or VFoxPro) - solution and examples

It took me quite a while to find a solution that will enable me to read dbf files from 64 bit SQL server, so i decided to create this guide for all of you guys searching for an answer.
Download and install Access Database Engine 64 bit : http://www.microsoft.com/en-us/download/details.aspx?id=13255
Creating Linked server for me is the most elegant solution
To create a Linked Server modify following sql statement with your data and execute it:
EXEC master.dbo.sp_addlinkedserver
@server = N'DBFServer',
@srvproduct=N'',
@provider=N'Microsoft.ACE.OLEDB.12.0',
@datasrc=N'D:\DBF\',
@provstr=N'dBASE IV'
You can read data directly without linked server, but i find this less elegant
To read data directly modify following sql statement with your data and execute it:
Use KTCDB
GO
sp_configure 'show advanced options', 1
reconfigure
GO
sp_configure 'Ad Hoc Distributed Queries', 1
reconfigure
GO
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.12.0' , N'AllowInProcess' , 1;
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.12.0' , N'DynamicParameters' , 1;
SELECT * FROM OPENROWSET('Microsoft.ACE.OLEDB.12.0',
'dBASE IV;Database=D:\DBF\;',
'SELECT * FROM ODMRAD')
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.12.0' , N'AllowInProcess' , 0;
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.12.0' , N'DynamicParameters' , 0;
GO
sp_configure 'Ad Hoc Distributed Queries', 0
reconfigure
GO
sp_configure 'show advanced options', 0
reconfigure
GO
I hope this will help you guys avoid frustration and wasting lots of time.

Visakh, i believe you are mixing terms 'reading' and 'importing', as with solution i proposed you can consume 'live' data without the need to
import it on every change.
To clarify : Data in DBF's can change at any point in time, and with my solution whenever you try to read data from either linked server or directly, you will always have most recent data, contrary to the import methods where you are cloning data and actually
could run into many problems synchronizing original and cloned data.
Ok..I understand that
Based on your data volatility you can configure an automated job for executing SSIS package to extract latest of data from dbase. But again it wont be "in real time". There will be slight delay depending on frequency you choose for job.
I was suggesting it more from a datawarehousing perspective whether data refresh happens only after predefined period (daily,6hrs etc)
If requirement is to get realtime data when you desire then definitely linked server would be the way to go.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How can I use syscall() from 32-bit application in 64-bit Solaris (v. 5.8)

Solaris 5.8
Sun Blade 150 (64-bit)
I have got SYGSYS when call syscall(...) from my 32-bit application.
Is it possible to use syscall() in 32-bit applications under 64-bit Solaris?

Hello again.
You may use the debugger (mdb) to open the core file generated by the SIGSYS trap:mdb coreThen you type::regs to list the register values at the time of the trap (in hexadecimal form).
For Sparc machines (it is more complicated on x86 machines) g1 holds the system call number, o0 holds the first argument, o1 the second one ... o5 the 6th one. (For system calls with more than 6 arguments the 7th, 8th... argument are stored on the stack.)
If g1 is 0 you know that the system call is done indirectly using SYS_syscall so the arguments are shifted (see above) and o0 holds the system call number.
You can exit mdb using::quitMartin

Migrating from 32 bit server to 64 bit server

Hi
We have planned to migrate our portal server from 32 bit to 64 bit.
I need your help in identifying the tasks to be performed after the migration.
Migration will be done by a BASIS consultant.
My job would be to make sure that portal is up and running with all the settings same as it is on the 32 bit old server.
We are operating on EP 7.0 (2004s) SPS 13.
We are using LDAP for internal users and UME for external users.
EP system is connected to R/3 4.7 and BI 7.0 systems.
New system will have different IP address and logical name but same SID.
It would be great if I get the url of the help links and documentation.
Regards
Vineet Vikram

Vineet,
Itu2019s difficult to identity all tasks you need because itu2019s depends of your scenario.
But basically you can check:
u2022     UME configuration (configuration, SSL, XML, security policies)
u2022     KM configuration (repository, crawlers, indexes, channels, system, ACL cache, search options)
u2022     Collaboration configuration
u2022     XML form filter
u2022     Anonymous users
u2022     Central portal configuration
u2022     Guided Procedures
u2022     Rule Collection
u2022     Data sources JDBC
u2022     ICE Protocol
u2022     Custom login page
u2022     Group x User x Role association
u2022     PAR and EPA transports
u2022     Web Dynpro applications
u2022     SLD check
Your basis consultant must pay attention some notes:
Note 1024539 - Recommended Settings for NW04 >= SP14, NW 7.0 >= SP6 on AIX
Note 1024700 - Installation/Upgrade information for NW04/NW 7.0 on AIX
Note 680617 - INST: Appl.Server in Heterogeneous SAP System Environment
Note 941735 - SAP memory management for 64-bit Linux systems
Note 861333 - Very slow start of the j2ee engine on AIX with 64bit IBM JDK
Note 723909 - Java VM settings for J2EE 6.40/7.0
Reward points if itu2019s helpful

Why is Photoshop CC 64 bit text engine not initialized

PC 64 bit
Windows 7
Using Photoshop CC 64 bit
working fine for months, now suddenly can't use text tool: I get "could not complete your request because something prevented the text engine from bing initalized.
What gives?
I had this same problem with Photoshop 2014 CC and had to go back to using CC one version older.
Has anyone had this problem & gotten it fixed?
Thanks
d

This Worked for me on both versions of CC & CC 2014 without emptying the trash.
Thanks!
Solution 6: Delete the Photoshop font cache
Mac OS
Quit Photoshop and the Creative Cloud desktop app (if installed).
Navigate to:
Photoshop CS6 and earlier
/Users/[user name]/Library/Caches/Adobe
Photoshop CC or CC 2014
/Users/[user name]/Library/Application Support/Adobe/Adobe Photoshop CC or CC 2014
Note: If you're using Mac OS 10.7 or later, use this TechNote to learn how to open the hidden Library folder.
Drag the TypeSupport folder (Photoshop CS6 and earlier) or the CT Font Cache folder (Photoshop CC or CC 2014) to the trash and empty the trash.
Windows
Exit Photoshop and the Creative Cloud desktop app (if installed).
Navigate to the appropriate folder
Photoshop CS6 and earlier
Windows XP: \Documents and Settings\Local Settings\Application Data\Adobe
Windows 7: \Users\[user name]\AppData\Local\Adobe
Photoshop CC and CC 2014
Windows 7 and 8: \Users\[user name]\AppData\Roaming\Adobe\Adobe Photoshop CC or CC 2014
Delete the TypeSupport folder (Photoshop CS6 and earlier) or the CT Font Cache folder (Photoshop CC and CC 2014), and empty the trash.
Restart Photoshop and test to determine if the problem recurs.

Migration from Oracle 9i 32 bit to Oracle 10G 64 bit on Windows 2003 Server

I am working on migrating Oracle 9i 32 bit to Oracle 10G 64 bit on Windows 2003 from Old server to new server. We have db around 500 GB and 3 schemas. I installed Oracle 10G on new server, created tablespaces, schema's blah blah and now doing export and import at schema level from old server to new server.
Import is taking more than 4 to 5 hours on new server. My manager is saying, window time is bit longer and he wants me to try possiblities to make this process faster. Can some one help me on this, to use the best possible method to complete this process faster?
Will below step work, if I try?
If I install, oracle 9i and 10g both on new server in different home directories and take the hot backup from old machine and restore on new machine in 9i home directory and use the upgrade configuration assistant from 10g and do the upgrade? Pls advice.
Thanks in advance,
Hari babu
Edited by: user6367891 on Mar 2, 2010 5:28 AM

It looks good.
I have one question in below steps:
To migrate an Oracle9i or older database to an Oracle Database 10g Release 1 (10.1) database for 64-bit Windows:
1 Perform steps 1 - 11 in "Migrating an Oracle Database 10g Release 1 (10.1) Database".
2 Shut down the database on the 64-bit computer:
SQL> SHUTDOWN IMMEDIATE;
3 Start the database migration:
SQL> STARTUP MIGRATE;
4 Migrate the database as described in Chapter 3, "Upgrading a Database to the New Oracle Database 10g Release" in Oracle Database Upgrade Guide.
In step 4, it says, migrate database as described in chapter 3. In chapter 3, it says, to do the upgrade the process using dbca or manually. Pls confirm whether do the upgrade process after issuing startup migrate or not.
Thanks in advance.

OWB 10g Release 2 from 32 bit to 64 bit on Linux

Hi guys,
I have a client who is planning to migrate their Linux server from 32 bit to 64 bit and migrate their Oracle database from 10.2.0.3 from 32 bit server to 10.2.0.3 from 64 bit server.
We have OWB 10g Release 2 (10.2.0.3) installed in the 32 bit server.
Our DBA is planning to move the entire database to the new server including the OWB repositories.
My question is,
Will the following work?
1. Install the OWB 10g Release 2 (10.2.0.3 or 10.2.0.4) 64 bit in the new 64 bit Linux 64 bit server
2. Remove all the OWB repository user schemas & roles from the database where OWB is installed
3. Install the OWB repository in the new 64 bit server
4. Import the .mdl backup of the project from existing OWB 32 bit to the new OWB 64 bit server
5. Configure the project with the new server
OR
Since our DBA is planning to move the entire database to the new server including the OWB repositories
1. Install the OWB 10g Release 2 (10.2.0.3) 64 bit in the new 64 bit Linux 64 bit server
Will I be able to access my repository that is migrated from the 32 bit server (avoiding the installation of OWB repository and importing the project and configuring the whole project in the new server) ?
Please someone shed some light on this. Your help is appreciated
Thanks in advance....
Edited by: user528846 on Feb 11, 2010 11:59 AM
Edited by: user528846 on Feb 11, 2010 11:59 AM

Does this mean, ... we have to install the OWB 64 bit and install a new repository in the 64 bit server?In my opinion you don't need to create new repository.
After migrating database to 64bit perform steps from Metalink note 434272.1 "How To Update Warehouse Builder 10.2 After A Database Cloning".
It is better to save the same path for new OWB 64bit software. If you install OWB into different path you need to update OWBRTPS table with new path to OWB software (look at metalink note 550271.1).
Regards,
Oleg

Print to Laserjet 1020 hosted by Windows 7 64 bit via network from Windows 7 32 bit

I am trying to print from Win 7 32 bit to a HP 1020 connected to a 64 bit Win 7. (the 64 bit is a new computer).
I have tried all the suggestions posted:
Downloaded updated 32 bit driver to the 32 bit PC.
I have also assigned the printer to a port on the computer.
I enabled on the 64 bit printing from a x86 computer.
Nothing helps.
When I print, the job gets stuck on the computer connected to the printer. When i release the spool, it then prints the page.
I was able to print when all the PCs were 32 bit (and XP before that).

Hi NDK
The host base driver is the same for both Win 7 32 & 64 bit operating systems.
Win 7 32-bit:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-88660-1&cc=us&dlc=en&lc=en&...=
Win 7 64-Bit:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-101596-1&cc=us&dlc=en&lc=en...=
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Calling 64-bit TestStand Engine from 32-bit LabVIEW

Similar Messages

Maybe you are looking for