Calling BSP in EP

Hi Sudha Mohan,
How did you call BSP in EP ?just guide me in obtaining the same.Will you plz tell me the procedure steps to be followed and the parameters to be filled.
thanks a lot in advance
regards,
Kiran

Hi,
To call BSPs inside Enterprise Portal (EP), you need to create BSP iview (portal content developement). There is a iview template provided with EP for this purpose, where you will set the following properties
system= <which R/3 system to connect to>
BSP application = <your BSP application name>
start page = <startpage for your BSP application>
and for the BSP to work in the system definition WAS setting should be done. And for SSO to work (provide all configuration are made from portal and R/3 system) you need to use fully qualified domain.
Hope this hleps.
Regards
Raja

Similar Messages

CALL BSP from ABAP report

I want to execute a BSP from ABAP report. The BSP is the standar CRM CASE MANAGEMENT BSP.
I have a CRM CASE list in ABAP report and when I make double-click on one case i want to call BSP to show this case. I don't want to execute the GUI transaction CRMD_CASE. I need to execute the BSP.

Hello Ivan,
To call the BSP from the ABAP report following thread will be helpful for you.
Call BSP from SE38 Program ?
Regards
Aashish Garg
Message was edited by:
aashish garg

Calling BSP from EBP

Hi ,
Has anybody called BSP page from EBP/ITS application ?
How can I call BSP from ITS ?
Thanks & Regards,
Sachin S M

Hi Sachin,
the easiest way is to call the BSP as a "catalog"
Just publish your BSP, then you may find under tab properties the copmplete URL for your BSP Application.
Then just define a catalog in spro
"Enterprise Buyer->Master Data->Define Catalogs"
where you define a "catalog" with the URL under catalog application call structure.
Result:
You should find an entry under your tab caltalogs with the description from your entry made in the customizing.
Regards
Andreas

Calling BSP Iview from a BSP Iview

How to call another BSP Iview from a BSP Iview ?
Is it the same like we call BSP Iview from a Controller ?
My problem is ..Intially i had only one Iview called from the controller. It was working fine.
I've added some includes in the View and while activating, i got the error msg
+Internal error Occured during runtime generation of the class CLOLkshdksjhfk ....+_
+(Dump id : GENBRANCHOFFSET_LIMIT_REACHED)+_
I found from the forum that, instead of calling all things in a single Iview, we can split that into different Iviews.I did the same. and the error had gone.
My Q is ...
I Have built code for tray (maximize and minimize). It works fine if the controller has One Iview and its not working if the controller has 3 iviews.
How to sort it ? If i call the other 2 Iview s from the parent one, will the prob solved ?
Thanks and Regards,
Kanal.

Hi,
Please check this weblog by Brian McKellar. You will surely find a way to avoid the error you mentionned.
[/people/brian.mckellar/blog/2005/04/25/bsp-programming-gen-branchoffset-limit-reached|/people/brian.mckellar/blog/2005/04/25/bsp-programming-gen-branchoffset-limit-reached]
Regards,
Tanguy

Calling BSP Application from Business Object?

Hi,
Can any one tried to call BSP Application from Business Object for showing in the Portal.
I have the following Scenario:
1. BSP Page: User will input the Date and Submit to store in the Database. and in this page the Workflow will be truggered and a Work item will be sent to the Next Level User.
2. When he executes the Work Item it has to trigger the BSP Application and has to show in the Enterprise Portal.
All this has to happen in the Enterprise Portal.
If any one knows how to triggere from business object, please let me know.
Thanks & Regards
Sumanth

Hi Vijay,
Thanks for the information. Its long back i was working on this, but not successful,
Now the similar requirement i need to develope in R/3.
I checked the mentioned class in R/3 4.7, This class is not available. I hope this is only in CRM because of PC-UI.
Any Suggesions how can i achieve this execution of BSP.
In one of the document i saw the Business Object BUS1006 as an example but i could not locate the way to reutilize the similar way.
Thanks & Regards
Sumanth

Calling BSP from abap program by interfacing EP

Dear Friends...
I am cslling a BSP... from an ABAP program... for that I have used this class and also a function module to ckeck.. actually from the abap program it invoks the BSP page very nicely and as my logic for invoking the BSP is a part of the Business Object and it is associated with the Enterprise portal so... when i reach the ep and trigger that business object to instantiate the BSP page from my calling logic of abap... it goes to the ITS and port 80 or something and didnt produce the BSP.. and only the blank screen was there...kindly help me how i am supposed to instantiate the BSP from properly from ABAP by interfacing the EP... my code is given below...
data :
lv_url type string.
concatenate
'http://sapdevbp.sbic.co.za:8041/sap(bD1lbiZjPTIwMA==)'
'/bc/bsp/sap/z_updatemng/bp.htm?bpid=' object-key-businesspartnerid
into lv_url.
call method cl_gui_frontend_services=>execute
exporting
document = lv_url
exceptions
others = 1.
please help....
me...
regards
Naim

hi ,
you can try using FM CALL_BROWSER in your report(ABAP code)to call bsp,like
data url(200) type c.
url = 'http://<server>.<domain><port>:'.
concatenate url '/sap/bc/bsp/sap/' into url.
concatenate url 'your_bsp_app_name/your_start_page.bsp' into url.
concatenate url '?sap-user=<userid>' into url.
concatenate url '&sap-password=<passowrd>' into url.
CALL FUNCTION 'CALL_BROWSER'
EXPORTING
 URL = url
 WINDOW_NAME = ' '
 NEW_WINDOW = ' '
 BROWSER_TYPE =
 CONTEXTSTRING =
EXCEPTIONS
 FRONTEND_NOT_SUPPORTED = 1
 FRONTEND_ERROR = 2
 PROG_NOT_FOUND = 3
 NO_BATCH = 4
 UNSPECIFIED_ERROR = 5
 OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
For this to work you have to enable SSO on your server.
you can check if it is enabled or not by runnning the BSP application "SYSTEM" ,page "SSO2TEST.htm" .
Follow the instructions on the page for testing.
This may not be a great way as your userid password are passed via URL,still it works
Cheers!

***How to call BSP App when custom button event fired from toolbar group***

Dear PCUI Experts,
   I have created one custom button for the transaction CRMD_BUS2000116.
And my urgnet requirement is , I need to call BSP application which is used to   take data from custom fields and stores into BP table.
How to call the BSP App. when i clicks on the button.
Please help me..
I will reward with great points.
Regards,
Stella.

Hi Purushothaman,
                             I have created a button in CRRM_ACCOUNT application.
Now i want to call a custom bsp application by clicking on that button.I have followed step given in this blog
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1646. [original link is broken] [original link is broken] [original link is broken] [original link is broken]
But the event is not triggered.Do I have to create an iview for my bsp application?
How to do that?Plz help.
Regards,
Ruby.

Call BSP Application From ABAP

Hi,
I want to call BSP Application from ABAP. I've searched the forum and they all are displaying BSP Page in Container of the Screen. My requirement is to show it in a web browser. For that matter I am generating URL to call BSP Application. Following is the code which is throwing short dump.
DATA: url TYPE string,
l_appl TYPE string,
l_page TYPE string,
l_params TYPE LINE OF tihttpnvp,
params TYPE tihttpnvp.
l_appl = 'ZPWLS_SCH_RPT'.
l_page = 'SELECTION_SCREEN.htm'.
call method cl_http_ext_webapp=>create_url_for_bsp_application
 exporting
 bsp_application = l_appl
 bsp_start_page = l_page
 bsp_start_parameters = params
 importing
 abs_url = url.
 CALL FUNCTION 'CALL_BROWSER'
 EXPORTING
 url = url
 WINDOW_NAME = ' '
 new_window = 'X'
 BROWSER_TYPE =
 CONTEXTSTRING =
 EXCEPTIONS
 FRONTEND_NOT_SUPPORTED = 1
 FRONTEND_ERROR = 2
 PROG_NOT_FOUND = 3
 NO_BATCH = 4
 UNSPECIFIED_ERROR = 5
 OTHERS = 6
 IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
Thanks,
Usman Malik

What is the dump? also you should uncomment the following lines to receive the exception thrown by the FM
* EXCEPTIONS
* FRONTEND_NOT_SUPPORTED = 1
* FRONTEND_ERROR = 2
* PROG_NOT_FOUND = 3
* NO_BATCH = 4
* UNSPECIFIED_ERROR = 5
* OTHERS = 6

Calling BSP's from SCM ICH

Hello all,
i need some information about calling BSP's from SCM ICH(inventory collaboration hub) into EP. for this what steps i need to do.
pl suggest me
thx
pradeep

when i was trying to call bsp from ICH..it shows..loading..but not coming anything...
One of the possible reasons could be that at the back end ABAP is trying to compile. Go to that particular BSP application and activate it manually and then try it in portal.
 maintained correct path for WAS. do i need to activate anything in BSP side?
What parameters do i put into
Application parameters
BSP definition type
BSP application...
if this is the first time you are going to run BSP application there are certain nodes in SICF tree should be activated. Check out OSS Note# 517484 for info on this.
BSP definition type => BSP Application (if you have aliases defined and want to use it then you should use BSP alias)
BSP application => your BSP applicatio name
Start page => start page of your BSP application (default.htm)
System => the back end system alias to which this BSP should connect to (e.g DEV001)
Hope this helps.
Regards
Raja

Calling BSP from WEB Template

Hi,
Can any one help me regarding Bex web designer..
I want to call BSP in my Bex web template with passing parameters to BSP(R/3) over URL and also like to avoid login pop for BSP.
Thanks
Atul

Hi Arun,
Thanks for your reply, but what i want to know is from WEB template how can we get variable to pass it to BSP page.
Eg: If i have using hierarchical object in my WEB template and i want know which node(level) i have selected, how i can achieve that, if i am able to do that then i can pass it to my BSP page.
Regards
Atul
Message was edited by: Atul Dhariwal

Calling BSP from Workplace Inbox

Is there a way to call BSP from Workplace inbox workitem?

Hi Ram,
If you can call URL like http://sdn.sap.com , you can.
Dany

How to call BSP based iview using Parameters

Hi,
 i developed one BSP application which takes 2 input parameters 1. Document No 2. Item No.
 I created a iView based on this BSP Application. I would like to call this iView by hardcoding input parameters.
 Input: Document No, Item and Submit button. output displays some text based on input. which is working fine, No issues.
Now, i developed a iViews using these BSP application. If i call iViews, again no Issues. Which works great, we need to enter input manally.
I would like to call my iViews with document no = '0004000000' , Item No = '000001' and Submit = 'SET'. Which directly should display the data for above document item.
that means iView URL + Document = '0000400000' & Item = '000001' & submit = 'SET'.
how to call Parametrized iViews???
I'm talking about Application Parameters in documentation (http://help.sap.com/saphelp_nw04/Helpdata/EN/88/266a3e54a2e946e10000000a114084/content.htm).
ApplicationParameter
You can enter parameter values for certain screen fields for displaying a SAP transaction here.
This field is optional.
The parameter values are specified with the following syntax:
<Screen_field1>=<Parameter1>
&<Screen_field2>=<Parameter2>
&<...>=<...>,...
Thanks,
Ben.
Edited by: Nagesh Ganisetti on Jan 29, 2009 9:18 AM

I want to pass values dynamically? How to pass values dynamically using URL???
assume my BSP URL wiht parameters:
http://nwd2bw1.corp.analog.com:8001/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sap/zzsdpra123/start.htm?gv_doc=0040013811&gv_item=000001 WORKING GREAT!!!
Developed an iView using ZZPRA123 BSP application in portal without APPLICATION PARAMETERS.
http://nwd2bw1.corp.analog.com:50100/irj/servlet/prt/portal/prtmode/preview/prtroot/pcd!3aportalcontent!2fcom.analog.analog!2fcom.analog.SD_BI_REPORTS!2fcom.analog.SD_iviews!2fcom.analog.z_quote_text?sap-config-mode=true&_gv_doc%3d0040013811&gv_item%3d000001 NOT WORKING.
Simple BSP application: ON INITIALIZATION Method
event handler for data retrieval
data: gv_name type thead-tdname.
data: lt_line1 type standard table of tline,
 lt_line2 type standard table of tline,
 lt_line3 type standard table of tline,
 lt_line4 type standard table of tline.
data: l_rfcwa type rfcdest.
data: event type ref to cl_htmlb_event,
 url type string,
 parameter type string,
 url_page type ref to if_bsp_page.
l_rfcwa = 'PRD_CLI002'.
if gv_doc is initial.
CALL METHOD request->get_form_field
EXPORTING
 name = 'gv_doc'
 formfield_encoding = 0
receiving
 value = gv_doc.
endif.
concatenate gv_doc gv_item into gv_name.
call function 'ZBI_STNDARD_TEXT'
 destination l_rfcwa
 exporting
 name = gv_name
 tables
 lines1 = lt_line1
 lines2 = lt_line2
 lines3 = lt_line3
 lines4 = lt_line4.
gt_line1[] = lt_line1[]. "Internal Header Text
gt_line2[] = lt_line2[].
gt_line3[] = lt_line3[].
gt_line4[] = lt_line4[].
Layout:
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content design="design2003" >
<htmlb:page title="Quote Texts " >
 <htmlb:form>
 <htmlb:inputField id = "gv_sid"
 value = "<%= gv_doc %>"
 visible = "FALSE"
 submitOnEnter = "TRUE" />
 <htmlb:inputField
 id = "gv_itm"
 value = "<%= gv_item %>"
 visible = "FALSE"
 submitOnEnter = "TRUE" />
 <htmlb:textView text = "Quote Texts for <%= gv_doc %> "
 design = "HEADER1"
 layout = "BLOCK"
 textColor = "dark blue" />
 <% if gt_line1 is INITIAL. %>
 <htmlb:textView text = "No Internal Header Text Found"
 design = "HEADER2" />
 <% else. %>
 <htmlb:textView text = "Internal Header Text"
 design = "HEADER2" />
 <% loop at gt_line1 into gs_line. %>
 <htmlb:textView id = "textEdit"
 layout = "BLOCK"
 text = "<%= gs_line-tdline %>" />
 <% endloop. %>
 <% ENDIF. %>
<%--* External Header text --%>
 <% if gt_line2 is INITIAL. %>
 <htmlb:textView text = "No External Header Text Found"
 layout = "BLOCK"
 design = "HEADER2" />
 <% else. %>
 <htmlb:textView text = "External Header Text"
 layout = "BLOCK"
 design = "HEADER2" />
 <% clear gs_line. %>
 <% loop at gt_line2 into gs_line. %>
 <htmlb:textView id = "textEdit"
 layout = "BLOCK"
 text = "<%= gs_line-tdline %>" />
 <% endloop. %>
 <% ENDIF. %>
<%Internal Item text%>
 <% if gt_line3 is INITIAL. %>
 <htmlb:textView text = "No Internal Item Text Found"
 layout = "BLOCK"
 design = "HEADER2" />
 <% else. %>
 <htmlb:textView text = "Internal Item Text"
 layout = "BLOCK"
 design = "HEADER2" />
 <% clear gs_line. %>
 <% loop at gt_line3 into gs_line. %>
 <htmlb:textView id = "textEdit"
 layout = "BLOCK"
 text = "<%= gs_line-tdline %>" />
 <% endloop. %>
 <% ENDIF. %>
<%External Item text%>
 <% if gt_line4 is INITIAL. %>
 <htmlb:textView text = "No External Item Text Found"
 layout = "BLOCK"
 design = "HEADER2" />
 <% else. %>
 <htmlb:textView text = "External Item Text"
 layout = "BLOCK"
 design = "HEADER2" />
 <% clear gs_line. %>
 <% loop at gt_line4 into gs_line. %>
 <htmlb:textView id = "textEdit"
 layout = "BLOCK"
 text = "<%= gs_line-tdline %>" />
 <% endloop. %>
 <% ENDIF. %>
 </htmlb:form>
</htmlb:page>
</htmlb:content>
Please guide me to call iview using dynamic parameters.
Thanks,
Ben.
Edited by: Nagesh Ganisetti on Feb 2, 2009 8:47 AM
Edited by: Nagesh Ganisetti on Feb 2, 2009 8:48 AM
Edited by: Nagesh Ganisetti on Feb 2, 2009 8:49 AM

How to call BSP page in one frame from a webdynpro page in another frame?

Dear experts,
I have a scenario as follows:
A BSP application which contains 5 frames. in the first frame I am calling a web Dynpro application. This is a tree and it is displayed correctly. on click of an item (node item) in the tree, a bsp page should be displayed in the second frame. I am not able to display this in the second frame. When I call the BSP page, it is getting displayed in the same frame (i.e, the first frame).
Kindly help me out.
Thanks & Warm Regards,
Jenny

From WDA you can't force the navigation of a different frame. Nor should you really be building an application with WDA running within a frame. You will have session management problems.
SAP recommendation is to use the NetWeaver Portal. You could then place the WDA and BSP applications into separate iViews. They can communicate with each other using Portal Eventing.

Calling BSP application from CRM PCUI framework

Hi All,
We are using the CRM PCUI for channel partner management. Since CRM PCUI framework has some limitations as to how the data is formatted in the layout such as no multiple value selection ( since it is a generic framework using the blueprint tables we have to use the predefined layout settings) we want to call a standalone BSP application to maintain some of the data such as marketing attributes. We want to do this by providing a link to the standalone BSP application where the data can be maintained. Since we will be calling this application in the create mode of a new BP, is it possible to integrate the whole application as one logical unit ? I mean we want to commit the marketing attributes within the same 'save' methods of the pcui framework. Is this possible to do ? Any ideas or input is greatly appreciated.
Thanks.

Hi,
we've already done a rework of the marketing attributes screen by using the technique I've described in my Weblog <a href="/people/gregor.wolf3/blog/2005/05/27/use-crm-pcui-html-viewer-to-call-a-custom-url">Use CRM PCUI HTML viewer to call a custom URL</a>. But it has one drawback: You can't use the Save button of the PC-UI applicaiton. You have to provide your own. But the usability enhanchement is rearly great.
Regards
Gregor

Call BSP from a funtion module and use results of the BSP in the calling fm

Hi BSP experts,
I want to implement following scenario. But currently I've no idea how to realize step 4 of the process.
1. An ABAP program calls a function module.
2. The function module calls a BSP page.
3. In the BSP users will fill out some fields (e.g. name).
4. After pressing the submit button the BSP should transfer the values to the export parameters of the calling function module.
Thanks for your support & Regards

within the FM code you should call a SAPGUI screen with embedded html viewer control, in which you will show the bsp page and user can enter value and hit submit. you can then collect the user entered value and set it as export value fo the FM. but why do you want to do this?
Regards
Raja

Calling BSP in EP

Similar Messages

Maybe you are looking for