Calling CIC0 from SAPPHONE PopUp

Hi experts,
i would like to invoke CIC0 in case of an incoming telephone (SAPPHONE) call using the customer master data.
SAPPHONE works fine, but I could not find the method to call CIC0 using SAPPHONE-PopUp Data..
Any solutions?
Thanx in advance
Michael

Hi Kathy,
Many thanks for your reply.
I have established a work-arround to solve the problem, but a serious solution would be apreciated ...
I don't need a step by step "cook book"; I only want to know, if there is a standard way to solve our problem.
If you don't mind, let me explain our probrem:
In case of an incoming call, the user must activate the Button:
" Aswer" and the CIC should display the customer "data" of the caller within the tabstrip "Business Data".
This works fine.
But!
Additionally, we have extended the Tabstrip "Search Display" by a number of customer master data fields (KNA1-*).
And these fields should be populöated as well.
But there is no automatically data transfer (especially KNA1-KUNNR) between the Tabstrip "Business Data" and the Tabstrip " Search Data".
Now my question: Is -in general- automatcally data transfer beween the tabstrips possible, or not?
And If, can we do this by CIC-Customizing?
Possible Problem: PAI is processing Tabstrib 1 (Search Display" before Tabstrip 2 ("Business Data").
But from my point of view, CIC must know the caller before the user activated the "Answer" button.
How can we handle this?
My Solution up to now:
At the Event: "Before PAI" I am doing almost the same as SAPphone PopUp does.
I am fetching the data (Caller Handle) from INDX-Cluster using the FM's "SP_CALL*" etc. But I think there must be a better solution.
Thank you for your help
Michael

Similar Messages

Calling invalidate( ). from a second view.

I have view A and v B in a web dynpro. B is a popup. In the popup window i can add a row to a table which is shown in view A. Saving and closing view B I see the changes only after resetting view A (i do that with wd_this->invalidate( ).
My question how to call invalidate from the popup (b) so that i can see after the refreshed table in A?
I found some anwers here, but they were to abstract.
Can you maybe give me an example?
Regards
Ezi

Hi Ezachiael,
Instead of using invalidate() method you can also distroy the view and recreate it.
i.e your view will be refreshed
Goto ViewProperties-->In View Properties
Change framework_controlle to when_visible
This will solve your problem.
You can also use invalidate() method in any action. i.e write action in View B.
Best Regards
Ravi

Calling an ABAP WebDynpro Popup from a BSP view

I need to know if the following is possible.
I have a requirement to call an ABAP WebDynpro Popup from a BSP view.
When the Popup is triggered (eg via pushbutton) the BSP will pass data to the Popup, before the Popup is closed the Popup will pass data back to the BSP to be displayed in the BSP view.
I do not want to rely on Portal Events as Portals may not be used, would really appreciate a clean simple solution.

Hi,
any webdynpro application has a URL behind it. Haven´t you tried to call that URL with Javascript code ??
script language="Javascript"
url = "test_page.htm" + "?field=" + param;
window.open(url, "F4window", "width=400, height=400");
/script
You can pass data to the WD application using parameters as I show you after the "?".

Hot to copy text from a Popup Windows in SAP CRM 7.0?

Hi guys,
we want to copy text from a POPUP Windows but you cannot highlighttext there.
We've tried with "Popup to Decide List" and "Popup for Reuse components".
Do you know if is possible to copy text from a POP-UP Windows in CRM WUI 7.0?
We also have tried to export text to the clipboard using:
CALL METHOD cl_gui_frontend_services=>clipboard_export
IMPORTING
     data = lt_tab
CHANGING
     rc = vl_rc
EXCEPTIONS
     cntl_error = 1
     error_no_gui = 2
     not_supported_by_gui = 3
     no_authority = 4
OTHERS = 5.
It doesnu2019t work neither. It gets the exception CNTL_ERROR.
Do you know any other Function/Class for this purpose?
Thanks in advance.
Fernando.-

Solved.
I've used a Text Area.

Refresh only page item while submitting data from the popup window

Hi All,
I'm pretty new to Apex .....
I have a form with text items as first few entries and then a radio button list and few text items again. On selecting certain radio button I have a popup window which acts as an interface for the next text item in the calling page. The purpose of having the popup window is that the text item following the radio button takes the input with certain character delimiters along with the data. Instead of using delimiters while entering the data I want a meaningful data to be keyed in the popup window and all the string operation to be done as a background process. I have been successful this far. I'm using the below javascript on click of the submit button.
javascript:doSubmit();
window.opener.doSubmit('REFRESH');
window.close();
On doing this I'm losing the values submitted for the items prior to the radio button(including radio button). Please note, I have a dynamic action set on page load to reset the values. Is it possible to refresh just the page item from the popup window.
Also, I tried excluding the window.opener.doSubmit('REFRESH'); from the above javascript. It sets the item with the expected value (viewed it in the session items, however I would like to view the concatenated string on my calling page) but following this there is an insert operation which uses all the necessary items in the form. All values except the value returned from the popup window is populated into the table. Am I missing something.
Any help in this regard is appreciated.
Thank you!!!
Regards,
Ganesh

Value set using Javascript is only in your browser page but is not yet available in the session. This is why the report doesn't return the expected output.
Before refreshing the report you would need to set the session state of this item.
You can set it after you assign the item a new value or before the report is refreshed
For Interactive Reports, this is available built in
you can go to Report Attributes >Advanced Attributes -> Page Items to Submit and specify P2_X1 for the field(and any other page item that the report is dependent on)
For standard reports, you can create a Dynamic Action that is triggered "before refresh" of the report's region, and choose PLSQL as the action types, give a dummy BEGIN NULL END; for the code and specify this item name in the page item to submit field so that it sets the items's value in session.

Calling PopUpManager from a class in a library

I have a class for logins that I have put in a Flex Library
Project.
Part of the login is a popup form(mxml) I have created and is
in the library.
The problem I have is this line:
loginPopUp =
LoginForm(PopUpManager.createPopUp(this,LoginForm,true));
The error I get is:
1067: Implicit coercion of a value of type
dataManagers:LoginManager to an unrelated type
flash.display:DisplayObject.
The parent “this” is no good since its parent
should be the application that called the logon.
Can I reference the caller from the LoginManager class I
created to feed to popupmanager as the parent for the popup?
The code in the app using the llibray that relates to this
(to save space) is:
import dataManagers.LoginManager
public var lm:LoginManager = new LoginManager();
lm.initServices();
//LoginManager.as
package theLoginManager {
import flash.events.Event;
import mx.managers.PopUpManager;
public class LoginManager {
import LibraryViews.Login.LoginForm;
public var loginPopUp:LoginForm;
public function initServices() : void
Alert.show("Login start");
appCFC = new RemoteObject("ColdFusion");
appCFC.source = "CFC.Users.usersGateway";
appCFC.addEventListener(FaultEvent.FAULT, server_fault);
appCFC.init.addEventListener(ResultEvent.RESULT,init_result);
appCFC.getById.addEventListener(ResultEvent.RESULT,getById_result);
displayLogin()
private function displayLogin():void{
loginPopUp =
LoginForm(PopUpManager.createPopUp(this,LoginForm,true));//THIS IS
THE PROBLEM LINE
loginPopUp.addEventListener("loginSuccessful",
removeLoginPopup);
//Removes login form
private function removeLoginPopup(event:Event):void{
PopUpManager.removePopUp(loginPopUp);
}//End Class
}//End Package
//LoginForm.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:TitleWindow xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:Form width="100%" height="100%"
defaultButton="{loginBTN}">
<mx:FormItem width="100%" label="Username"
required="true">
<mx:TextInput id="email"
width="175" text="mltv"/>
</mx:FormItem>
<mx:FormItem width="100%" label="Password"
required="true">
<mx:TextInput id="password"
displayAsPassword="true"
width="175" text="nuffer"/>
</mx:FormItem>
<mx:VBox width="100%" horizontalAlign="center">
<mx:Button id="loginBTN" label="Login"
click="authenticateUser();" fillColors="[#80ff00, #80ff00]"/>
</mx:VBox>
</mx:Form>
</mx:TitleWindow>

I solved it by passing the parent when I called it from the
parent project:
lm.initServices(this);
and then created a var in the .as file:
private var theCallingParent:DisplayObject;
theCallingParent = theParent;
Then used that variable when I called the popup:
loginPopUp =
LoginForm(PopUpManager.createPopUp(theCallingParent,LoginForm,true));
Sorry to clog up the board.

Populate data into standard component alv from Zcomponent popup data selected

HI All
I have to call Zcomponent in standard component and need to pass value into Zcomponent (table) and from Zcomponent select row and pass back to standard component.
Steps
1) Created Zcomponent with interface node
2) Enhanced the standard component and create used components for Zcomponent and make it available at component controllers and view controllers.
When I click on Button in standard component I am calling this Zcomponent as popup window.
My problem I when I select data in Zcomponent I need to populate the data in ALV of standard component.
I thought of 2 methods to take my selected back and populate data into standard component ALV.
1) Create event: EVENT1 and   Interface method Method1 and link to EVENT1
So that I can raise this event in Zcomponent and populate the data into standard component ALV
Problem: Under events interface checkbox is visible, when I select my enhancement implementation the interface checkbox not visible under events tab?.
2) Create Interface method Method1 write logic to populate data into standard component ALV
But here to when I select my enhancement implementation the interface checkbox not visible under?
Can anyone please help me why interface checkbox is not visible or any better solution to populate the data back to standard component alv?
Thanks
Gopal

Hi Gopal,
You can achieve your requirement by using EVENTS as below
Create an event SET_DATA in component controller of zcomponent and mark it as interface and also include the parameters like context_element( type ref to if_wd_context_element), etc as below
Now, create an action for the event onLeadSelect of your zcomp Table and write the below code
                 DATA lo_ctx_element TYPE REF TO if_wd_context_element.
               "get the selected row
                 lo_ctx_element = wdevent->get_context_element( name =
                    'NEW_ROW_ELEMENT' ).
               "Raise the event with parameter
               wd_comp_controller->fire_set_data_evt( context_element = lo_ctx_element ).
Use the Zcomponent in your standard component and make available in std. view's properties
Create an event handler SET_DATA method for your Zcomp's event as below
Now, inside this method, you get the parameter CONTEXT_ELEMENT and get the data from this context element as below
               context_element->get_attrribute( ) or
               context_element->get_static_attributes( )
You can populate the data into standard component based on the obtained value from Zcomponent.
Hope this helps you.
Regards,
Rama

Problem with a navigation from a Popup Window in an other Window

Hi Experts,
i have a problem with a popup window. I explain my problem. I have a DC Component in which there are two different Windows (MainWindow and PopupWindow) and one of this Window is a popup Window. I desire to navigate from the popup window to the main window of the component. Is there a way to accomplish that ?
I have created the popupWindow and it works very good.
Thanks a lot for your help.
Gregorio Perillo
Edited by: GregorioPerillo on May 28, 2010 5:45 PM

Hi ,
By using this code you have to Open Popup Window
public void popup( )
//@@begin popup()
poplink=wdComponentAPI.getWindowManager().createModalWindow(wdComponentAPI.getComponentInfo().findInWindows("Wd_POPupwindow"));
poplink.setWindowPosition(500,30);
poplink.open();
//@@end
Wd_POPupwindow-- This is Window Name Under this window you can create in View that view having OK and Close Buttion.
When click on Submit button that time you call the popup method. that time you will get popup window
Regards
Vijay Kalluri

Error message win32 API error2 when calling ShellExecuteErW from AgWorkspace.shellExecute

after the command Exporting I get the message: Internal failure: win32 API error2 calling ShellExecuteErW from AgWorkspace.shellExecute. System is only exporting Thumnails.
System is windows8, 64bit Lightroom 5.2 (newest version)

At the bottom of the import dialog is a popup marked Post-processing. It's probably currently empty. Set it to Do Nothing and try the export again.

Calling report from form. Need PDF output

I am calling a report from a form using RUN_PRODUCT. I need to display the form in PDF format. When the user clicks the button in the form to run the report, acrobat reader should open up and the report displayed there. Please help.
Thanks

Thanks for the response. The first part worked. I am able to get the output in PDF format. In the 2nd part where I want to open acrobat and display the output, I am having some trouble with the code. When I compile, it says
win_api_environment.read_registry must be declared. Is there some package I need to attach?
Also, in the After reports trigger, how do I pass vFile (I am assuming this is the PDF file name)?
Thanks
The first thing you'll want to do is pass parameters to the report IE DESTYPE, DESNAME and DESFORMAT where these could be FILE, 'c:\temp\report' and PDF.
Then, you can try this piece of code I wrote (with some help from other people at Metalink and here) sometime back. Now, I call it from forms, but in your case, you'd have to run it in the after report trigger. Since with RUN_PRODUCT you don't know when the report is finished, if you did it from the form, it wouldn't work correctly.
PROCEDURE OPEN_PDF(vFile IN VARCHAR2)
IS
vcServerApp varchar2(40);
vcServerTag varchar2(600);
vcCommand varchar2(2000);
iArgPos pls_integer;
dummy NUMBER;
BEGIN
-- 1 get the Server App for .PDF files
vcServerApp := win_api_environment.read_registry('HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\.PDF','',true);
-- 2 get the executable
vcServerTag := 'HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\'||
vcServerApp||'\SHELL\OPEN\COMMAND';
vcCommand:= win_api_environment.read_registry(vcServerTag,'',true);
-- 3 Sort out how to specify the Filename
iArgPos:= instr(vcCommand,'%1');
if iArgPos = 0 then --no substitution Var on the command line
vcCommand := vcCommand||' '||vFile;
else
vcCommand := substr(vcCommand,1,(iArgPos-1))||
vFile||substr(vcCommand,(iArgPos+2));
end if;
-- 4 Run using Winexec (or Host if preferred).
win_api_shell.winexec(vcCommand);
EXCEPTION
when no_data_found then
abortt('Acrobat Reader was not found! Please consult with your help desk to install it and try again.','N');
END;
Chad
I am calling a report from a form using RUN_PRODUCT. I need to display the form in PDF format. When the user clicks the button in the form to run the report, acrobat reader should open up and the report displayed there. Please help.
Thanks

Contact name not showing in call/sms log even when I call/sms from my address book.

Two things have changed on my phone recently.
1. I ran the latest update 4.3.2
2. My phone was not showing all the contacts in my address book that is in my Mobile Me account. Mobile me had 166 contacts. The iPhone 4 had 136. I I unchecked the syncing of my contacts on my phone. This removed all the contacts from my phone. Then I check the syncing options again. All 166 appeared on the phone.
I'm not sure which of the two caused the issue but now anytime someone who calls their name does not appear on the display or log, just their number. I can even call people from my address book and the display shows that I am calling them with their name and photo on display. However, in the call log the name does not show just their number. This applies for text messages. I send a message directly from within the contact card in the address book and in my text log it shows only the number and not the name.
I've turned the phone off and on a couple of times.
I would appreciate any advice.
Cheers

Thanks iraghib,
In the end I reset my phone to factory settings. I created a back up of my address book and ical. Reset the phone and did a sync again. This fixed it all. I didn't need to use the backups but is was nice to know they were there. I felt entering the various passwords for all my installed apps was a much better deal than adding the international area code to the 166 contacts I have in my address book.
Good luck. And thanks for the post.

How can I access my Call Handlers from outside line (outside district)

CISCO VoIP System Info:
Cisco Unity Connection version: 8.6.2ES25.21900-25
CM Admin System version: 8.6.2.21900-5 on C200M2 Servers
Our engineer setup our Call Handlers so that in our to change the recordings on them, you diall 7800 from a phone inside the office, or as he put it in the procedures, from within the district. Once you dial, you need to enter the user code, password, then the extension of the Call Handler, and we have no problems recording/changing any Call Handlers. However, due to possible inclement weather approaching in the next few weeks, I was asked how we cna change them from an outside line (manager's home, etc.). We cannot access from an outside line. 7800 is not a DID, it is simply the extension he assigned to access the call handlers. I even went so far as to setup a dummy phone and forward it to 7800, but this does not work either. It forwards to the extension's voicemail. Is there a way we can access the Call Handlers from an outside line? Any help would be gretaly appreciated. Thank you in advance.

Hey Joseph,
Go Flames ....errrrrrrrrrrrrrrrrrr maybe not so much
What you are trying to get to is really just the Greetings Administrator
conversation and there are multiple ways to get there.
For example, you can set up a Caller Input off any mailbox (Press 1-9) let's say 7 to
go to Conversation> Greetings Administrator. So you could set this on the managers mailbox
and when he calls his own number from home once his greeting
kicks in he can press 7 to link to the Greetings Administrator conversation
or
You could set up a DID DN xxx-xxx-2345 as a CTI-RP and set Call Forward All to reach Unity Connection.
In this case you will need to use the Forwarded Routing Rules = xxx-xxx-2345 route to
Greetings Administrator. Make sure to move this rule to the bottom of the list!!
Cheers!
Rob
"Why do the best things always disappear "
- The Band

Call tcode from alv report and passing group of values

hi all .
i want to call tcode from alv report and passing an internal table or group of values to a selection option of that t code ? how
ex. passing group of GL to fbl3n and display the detials of all .
thank you

Dear,
You have done a small mistake
--> rspar_line-option = 'EQ'.
rspar_line-HIGH = PDATE-HIGH.
u r passing "high" value and in "option u r passing "EQ" so how it will work!!!
So if u r passing only 1 date or more dates like 01.01.2010 , 15.02.2010 , 10.03.2010 then pass
rspar_line-selname = 'SO_BUDAT'.
rspar_line-kind = 'S'.
rspar_line-sign = 'I'.
rspar_line-option = 'EQ'.
rspar_line-LOW = PDATE-HIGH.
APPEND rspar_line TO rspar_tab.
or if u r passing low & high date means in range like 01.01.2010 to 30.01.2010, then pass
rspar_line-selname = 'SO_BUDAT'.
rspar_line-kind = 'S'.
rspar_line-sign = 'I'.
rspar_line-option = 'BT''.
rspar_line-LOW = PDATE-LOW.
rspar_line-HIGH = PDATE-HIGH.
APPEND rspar_line TO rspar_tab.
try above code , hope it helps...
i think u cannot use "call transaction using bdcdata" in ur case bcoz as u said in ur 1st post u want to display the details of all but still if u want to use then u should pass all parameters in loop.
PROGRAM
DYNPRO
DYNBEGIN
FNAM
FVAL
ex:-
LOOP AT GT_TEMP INTO GS_TEMP.
CLEAR bdcdata_wa.
bdcdata_PROGRAM = 'SAPXXXX'.
bdcdata_DYNPRO = '1000'.
bdcdata_DYNBEGIN = 'X'.
bdcdata_wa-fnam = '''.
bdcdata_wa-fval = ''.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_PROGRAM = ''.
bdcdata_DYNPRO = ''.
bdcdata_DYNBEGIN = ''.
bdcdata_wa-fnam = 'SD_SAKNR'.
bdcdata_wa-fval = GS_TEMP-GLACCOUNT.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_PROGRAM = ''.
bdcdata_DYNPRO = ''.
bdcdata_DYNBEGIN = ''.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = 'XXX'.
APPEND bdcdata_wa TO bdcdata_tab.
ENDLOOP.
try above code if u r using call transaction...
Edited by: mihir6666 on Jul 9, 2011 3:10 PM
Edited by: mihir6666 on Jul 9, 2011 3:11 PM
Edited by: mihir6666 on Jul 9, 2011 3:13 PM

I cannot log onto the App Store, the page appears when I call it from the dock or the Apple menu. I can call the log-in box from the menu bar, but on signing in the spinning icon just keeps spinning,(not the beachball). Any suggestions? Using 10.6.7 and u

I cannot log onto the App Store, the page appears when I call it from the dock or the Apple menu and I can call the log-in box from the menu bar, but on signing in the spinning icon just keeps spinning,(not the beachball). Using 10.6.7 and up-to-date on all software. Any suggestions?

Could be a third party app preventing you from being able to login.
Mac App Store: Sign in sheet does not appear, or does not accept typed text
If it's not a third party issue, follow the instructions here.
Quit the MAS if it's open.
Open a Finder window. Select your Home folder in the Sidebar on the left then open the Library folder then the Caches folder.
Move the com.apple.appstore and the com.apple.storeagent files from the Caches folder to the Trash
From the same Library folder open the Preferences folder.
Move these files Preferences folder to the Trash: com.apple.appstore.plist and com.apple.storeagent.plist
Same Library folder open the Cookies folder. Move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Relaunch the MAS.

Calling Report from Menu (Oracle Forms 10g)

We have the applications in Forms6i & Reports 6i (Client Server) and migrating to Forms 10g and Reports 10g. We have the menu, from that menu we are calling all the forms and Reports. For especially Reports earlier we user RUN_PRODUCT but now 10g it is not working. How can call the report using RUN_REPORT_OBJECT
Important things we have some dynamic parameters (input) to the each report. That means when i called the report from the menu i need to get first parameter form to take the parameters and then can be run the report.

Here is the code to call report from menu in 10g
DECLARE
pl_id ParamList;
repid REPORT_OBJECT;
v_rep varchar2(100);
v_server VARCHAR2(100);
rep_status varchar2(100);
v_host VARCHAR2(100);
BEGIN
     select rep_server into v_server from reports_data;
     select machine into v_host from reports_data;
pl_id := Get_Parameter_List('tmpdata');
     IF NOT Id_Null(pl_id) THEN
     Destroy_Parameter_List( pl_id );
     END IF;
     pl_id := Create_Parameter_List('tmpdata');
Add_Parameter(pl_id,'P_C_CODE',TEXT_PARAMETER,:GLOBAL.COMPANY);
Add_Parameter(pl_id,'P_B_CODE',TEXT_PARAMETER,:GLOBAL.BRANCH);
     repid := find_report_object('REPORTOBJ');
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,getpath||'E_VOUCHER_ENTRY.RDF');
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'htmlcss');
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,v_server);
          v_rep := RUN_REPORT_OBJECT(repid, pl_id);
          rep_status := REPORT_OBJECT_STATUS(v_rep);
          WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
               LOOP
                    rep_status := report_object_status(v_rep);
                         message('Running');
               END LOOP;
          IF rep_status = 'FINISHED' or rep_status is NULL THEN
               --Display report in the browser
               WEB.SHOW_DOCUMENT('http://'||v_host||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_server,'_blank');
          ELSE
               null;
     END IF;
END;

Calling CIC0 from SAPPHONE PopUp

Similar Messages

Maybe you are looking for