Calling maxl scripts

hi,
can any one tell me who can we call a maxl script in between a sql quire or a procedure in a the shell scripts,
thanks,
pramodh.

I am not sure of what you are supposed to do.
But SQL script and Maxl script are two different objects.
you can call both from the shell script using respective command line utilities.
You can set the dependency to proceed to Maxl script based on the success criteria of SQL script.
To call Maxl script in the shell script is simple:
essmsh test.mxl
I hope you understand this.
Regards,
Srinivas Bobbala.

Similar Messages

Calling maxl from unix script

Hi guys..I want to call a maxl script from a unix script. i am using ksh shell in unix..
Can anyone give me the syntax from this..I am not very familiar with this.

Actually I found there was an Esscmd.sh file too.that's why wanted to be sure about the option of esscmd.
And would these scripts accept parameters like this:
<path>Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1/bin/startMaxl.sh /maxl-Path/script.mxl 1 2
and if we place & after the script name would it be a nohup process and run the next ones parallely??:
<path>Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1/bin/startMaxl.sh /maxl-Path/script1.mxl &
<path>Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1/bin/startMaxl.sh /maxl-Path/script2.mxl &
Sorry if my questions seem stupid.
I know very little about this tech and just want to clear any confusion and know as much as i can.

Looping in Maxl Script - To load multiple files

Hi,
I am using Essbase 11.1.2 on UNIX.
I have maxl script which will load 20 to 30 extraction file. Number is inconsistent. Extraction files will grow each month. Extraction files are with same name with the suffix _1,_2...(2 Gb thing). My previous script was hard coded to load file by file to load up to 50 files. I am trying to remove these hard coded lines, and try to loop the “load” statement. I have tried several ways using while loop in shell to call maxl /msh , but no luck. Any ideas?
Thanks

A very similar question was asked recently (but for Windows): Re: Maxl to import datafolders
What have you tried? Maybe someone here can show you what's wrong with your script.
The approach I usually take with this type of problem is to write a script that dynamically builds one single MaxL script with the appropriate number of files, rather than calling MaxL multiple times.
I am generally too ashamed to share my Unix scripts, but at it's most basic, non-error-trapped, probably-inadvisable-and-full-of-holes-for-all-kinds-of-reasons, you could include something like this to build your load script:
ls filename*.txt | awk {'print "import database etc... "$1" ...on error etc;"'} > scriptname.mshSince you can nest MaxL scripts, you can then reference scriptname.msh from a static 'master' script which handles login / spool on / spool off / logout as appropriate. See http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_tech_ref/maxl_commands_nesting.html or Cameron's 2009 K'scope presentation: http://odtug.com/apex/f?p=500:575:526121996615242::NO::P575_CONTENT_ID:4605

Weird problem using "Login" in MaxL script

Hi there
I have created a MaxL script for loading som data into an Essbase. The script you can see below.
login 'user' 'password' on 'nkm18k14';
import database 'realtest'.'Loadtest'
data from text data_file '\\nkm18k00\Planning\Loaddata\lonbud.txt'
using server rules_file 'LonBLoad'
on error write to '\\nkm18k00\Planning\Errorlogs\realtest.txt';
When I try to execute it, as it is i get the following error "(3) Syntax error near ['$'], which im guessin is line 3, right?
When I remove line 1 (the login statement), the script runs just fine. What is goin on, any ideas?
I as a user have write acces to the network locations specified, could it be that the essbase uses som kind of system user that doesn't have acces to the network location?
Any valuable input will be appreciated.
Regards, Jacob

It's true that they are not "needed" from a security approach, but from a maintenance approach you still end up having to touch a large number of scripts if you store the connection details in them.
As a system user, you don't even have to change the password -- but if you have someone leave the company you may just want to.
Either way, I would never want to hard code connectivity details inside dozens of scripts when I can keep it in a single place.
Here is the MXL_Shell file for Windows -- you can obtain the SendEmail.exe from multiple places, but the syntax should be validated.
The location of the scripts, log files, and batch items can of course be modified to your liking as well...
The Errors that are ignored are stored in a file called "IGNORED.TXT" in the Batch directory (see below for what I ignore).
@echo off
REM ================================================================
REM   MXL_Shell.cmd - Wrapper to call EssMsh (MXL) scripts
REM ----------------------------------------------------------------
REM   Author: Doug Bliss
REM   Initial QC: 5/21/2005
REM ----------------------------------------------------------------
REM   Script to Execute should be base name (without extension)
REM   Script should exist in the ..\Scripts directory
REM   Both StdOut and StdErr are redirected to ..\Logs\<Script>.log
REM   Call activity is logged to ..\Logs\Daily_ddmmyy.log
REM   Log file is appended to ..\Logs\<Script>.hst at finish
REM   Log file is processed for "Error" tokens to determine if
REM      the result was successful or not
REM   Notifications are taken from comment blocks in the script:
REM      /* Notifications:
REM         ONSUCCESS [email protected]
REM         ONERR [email protected]
REM       */
REM   Localization details: Update the variables set immediately below (typically SRCPATH and EMAIL*)
REM ================================================================
SET SRCPATH=C:\Automation
SET EMAILDOM=<yourcompany.com>
SET EMAILRELAY=<relay>.%EMAILDOM%
SET DEVBOX=<devboxname>
SET IGNORE=%SRCPATH%\Batch\Ignored.txt
SET MXLFILE=%SRCPATH%\Scripts\%1.mxl
SET LOGPATH=%SRCPATH%\Logs
SET LOGFILE=%LOGPATH%\%1.log
SET ERRFILE=%LOGPATH%\%1.err
SET HSTFILE=%LOGPATH%\%1.hst
SET DAYFILE=%LOGPATH%\Daily_%date:~4,2%%date:~7,2%%date:~10,4%.log
REM ################################## Step 1: Sanity Checks
IF "%1"=="" EXIT /B 1
IF NOT EXIST %MXLFILE% EXIT /B 2
REM ################################## Step 2: Initialize Log entries
IF NOT EXIST %LOGPATH%\. MKDIR %LOGPATH% >nul
IF EXIST %ERRFILE% MOVE /Y %ERRFILE% %SRCPATH%\Logs\%1.bak.err >nul
IF EXIST %LOGFILE% MOVE /Y %LOGFILE% %SRCPATH%\Logs\%1.bak.log >nul
REM ################################## Step 3: Call the Script
ECHO %time% -- Calling EssMsh Script: %1.mxl %2 %3 %4 %5 %6 %7 %8 %9 >>%DAYFILE%
ECHO ============================== ESSBASE SESSION LOG >%LOGFILE%
ECHO Log Opened: %date% %time% >>%LOGFILE%
CALL User.cmd
essmsh.exe -s %COMPUTERNAME% -u %UID% -p %PWD% %MXLFILE% "%2" "%3" "%4" "%5" "%6" "%7" "%8" "%9" >>%LOGFILE% 2>&1
REM ################################## Step 4: Post Processing
REM #### Daily Log Entry (return call)
ECHO %time% -- Returned from Maxl Script: %1.mxl >>%DAYFILE%
ECHO Log Closed: %date% %time% >>%LOGFILE%
ECHO ============================== END OF SESSION >>%LOGFILE%
REM #### Process Error entries and filter via Ignored.txt file
TYPE %LOGFILE% | FIND "ERROR" >%ERRFILE%
FOR /f "tokens=1" %%a in (%IGNORE%) DO TYPE %ERRFILE% | FIND /V "%%a" >%ERRFILE%
FOR %%a in (%ERRFILE%) DO SET /a ErrCount=%%~za >nul
IF '%COMPUTERNAME%'=='%DEVBOX%' (
     SET TYPE=NON-Production
     SET SVR=development
) ELSE (
     SET TYPE=Production
     SET SVR=production
IF %ErrCount% EQU 0 (
     ERASE /Q %ERRFILE%
     SET SUBJECT=Essbase %TYPE% Script Completed
     SET MESSAGE=Maxl script '%1' has successfully completed on the %SVR% server.
     SET ATTACH=
     SET RESULT=SUCCESS
) ELSE (
     REM ################################## ERROR Processing
     SET SUBJECT=Essbase %TYPE% Script Error
     SET MESSAGE=Errors were detected in Maxl script '%1', the job's log and error files are attached.
     SET ATTACH=%LOGFILE% %ERRFILE%
     SET RESULT=ERR
TYPE %MXLFILE% | FIND "ON%RESULT%" >Notify.tmp
FOR /f "tokens=2" %%a in (Notify.tmp) DO SendEmail -f %COMPUTERNAME%@%EMAILDOM% -t %%a -u "%SUBJECT%" -m "%MESSAGE%" -s %EMAILRELAY% -a %ATTACH%
ERASE /Q Notify.tmp
ECHO. >>%DAYFILE%
ECHO. >>%HSTFILE%
TYPE %LOGFILE% >>%HSTFILE%
:FIN
ECHO.
EXIT /B %ERRCOUNT%Here is my IGNORED.TXT file (only the code itself is used, the rest is for reference).
0000000 This file contains Essbase Error codes which should be ignored by ESS_Shell.cmd or MXL_Shell.cmd
1051083 This substitution variable does not exist.
1003029 Encountered formatting error in spreadsheet file [%s]
1090010 Error in File [%s] Which is a [%s] Spreadsheet
1051068 Database is not in archive read-only mode

Script to export Security file using maxl script

can anyone provide me the Script to export Security file using maxl script.It should create a log file and a batch file should also be there to schedule the Maxl script.Please help me with this

Hi,
You can use something like
[b]login admin password on localhost;
[b]spool on to 'c:\temp\log.txt';
[b]export security_file to data_file C:\temp\sec_file.txt;
[b]spool off;
[b]logout;
Then you can have a batch file that just calls the maxl script
essmsh name_of_maxl_script.mxl
The batch script can then be scheduled.
Cheers
John
http://john-goodwin.blogspot.com/

Auto-kick off MaxL script after Oracle GL data load?

Hi guys, this question will involve 2 different modules: Hyperion and Oracle GL.
My client has their accounting department updating Oracle GL on a daily basis. My end-user client would like to write a script to automatically kick off the existing MaxL script which is for our daily data load in Hyperion. Currently, the MaxL script is manually executed.
What's the best approach to build a connection for both modules to communicate with each other? Can we use a timer to trigger the run? If so, how?

#1 External scheduler.
I've worked on Appworx and it has build a chain dependent task. There are many other external schedulers like Tivoli,....
#2 As Daniel pointed out you can use Windows scheduler.
For every successful GL load add a file to a folder which is accessible for your Essbase task.
COPY Nul C:\Hyperion\Scripts\Trigger\GL_Load_Finished.txt
Create another bat file which is scheduled to run on every 5 or 10 mins (this should start just after your GL Load scheduled task)
This is an example i've for a triggered Essbase job.
IF EXIST %BASE_DIR%\Trigger\Full_Build_Started.txt (
Echo "Full Build started"
) else (
     IF EXIST %BASE_DIR%\Trigger\Custom_Build_Started.txt (
     Echo "Custom Build started"
     ) else (
          IF EXIST %BASE_DIR%\Trigger\Post_Build_Batch_Started.txt (
          Echo "Post Build started"
          ) else (
          IF EXIST %BASE_DIR%\Trigger\Start_Full_Build.txt (
          Echo "Trigger found starting batch"
          MOVE %BASE_DIR%\Trigger\Start_Batch.txt %BASE_DIR%\Trigger\Full_Build_Started.txt
          call %BASE_DIR%\Scripts\Batch_Files\Monthly_Build_All_Cubes.bat
          ) else (
               IF EXIST %BASE_DIR%\Trigger\Start_Custom_Build.txt (
               Echo "Trigger found starting Custom batch"
               MOVE %BASE_DIR%\Trigger\Start_Custom_Batch.txt %BASE_DIR%\Trigger\Custom_Build_Started.txt
               call %BASE_DIR%\Scripts\Batch_Files\Monthly_Build_All_Cubes_Custom.bat
               ) else (
                    IF EXIST %BASE_DIR%\Trigger\Start_Post_Build_Batch.txt (
                    Echo "Trigger found starting Post Build batch"
                    MOVE %BASE_DIR%\Trigger\Start_Post_Build_Batch.txt %BASE_DIR%\Trigger\Post_Build_Batch_Started.txt
                    call %BASE_DIR%\Scripts\Batch_Files\Monthly_Post_Build_All_Cubes.bat
)So this bat file if it finds Start_Full_Build.txt in the trigger location, it'll rename that to Full_Build_Started.txt and will call the Full Build (likewise for custom and post build)
Regards
Celvin
http://www.orahyplabs.com

Maxl Script running Issue in Essbase 11.1.2.2

Hi All,
We have a Maxl Script which takes Level 0 Backup of the Database. We have migrated the apps to the new server 11.1.2.2 and this script is not running in the new server but it works fine in the Old Server.We have the code like this in the script
REM $1 = USERNAME
REM $2 = PASSWORD
REM $3 = servername
REM $4 = BSOAppName = RPSBSO
REM $5 = BSODB_Name = RPSBSOD
REM $6 = ASOAppName = RPSASO
REM $7 = ASODB_Name = RPSASOD
essmsh C:\Hyperion\Automation\MAXL\Backup_BSO.msh Username password gvw3086-v.atlanta.hp.com RPSBSO RPSBSOD RPSASO RPSASOD
When i run the .bat script an Fatal Error is shown under the above line saying
MSH Fatal Error: Error Initializing localization module.
I have changed all the path locations,server names etc according to the new environment in the script but the script is displaying error like above. Can any one help me on this.
Regards,
Naveen

972698 wrote:
Hi John Thanks for your post.
I would like to give some more information like this is the script named BU_BSO_2.bat which is used for taking backup of individual application RPSBSO, and it calls Backup_BSO.msh script which is internally called in BU_SO_2.bat file as given below the command. What we do is we just run this BU_BSO_2.bat batch file where it executes everything and places the backup in given path in the script. But actually its giving error in executing only the given below line
essmsh C:\Hyperion\Automation\MAXL\Backup_BSO.msh Username password gvw3086-v.atlanta.hp.com RPSBSO RPSBSOD RPSASO RPSASOD
Error shown : MSH Fatal Error: Error Initializing localization module
And i went through your doc but they are the server specific paths which we are not using in this script and this script runs fine in 11.1.1.
Let me know if i can provide any more information.
Regards,
Naveen
Try updating
essmsh C:\Hyperion\Automation\MAXL\Backup_BSO.msh Username password gvw3086-v.atlanta.hp.com RPSBSO RPSBSOD RPSASO RPSASOD
to
startMaxl.bat C:\Hyperion\Automation\MAXL\Backup_BSO.msh Username password gvw3086-v.atlanta.hp.com RPSBSO RPSBSOD RPSASO RPSASOD
If the location of startMaxl is not in the windows path variable you will need to either update the path variable or put the path in the script e.g.
C:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\bin\startMaxl.bat
or C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin\startMaxl.cmd
Alternatively edit startMaxl and take the variable information out of it and put it in your script then you will be able to use essmsh.
Cheers
John
http://john-goodwin.blogspot.com/

Batch File and MaxL Script

I have a MaxL script that exports level0 data from various cubes. I have a batch file to call that script at daily intervals.
I want to name the output something different each day (preferably NAMEmmdd type format). I realize I can add a rename or move to the batch but wonder if there is a MaxL method that will allow me to export to a different name?
Current MaxL is simply
export database APP.DB level0 data to data_file "'$Arborpath\am1119.txt'";
Ideas or direction to go to learn answer?
T,
J

Hi,
You can pass in variables into maxl, so you the calling batch file can pass in a variable which holds the filename with the current day...
For example you have a batch file
essmsh c:\temp\export.mxl 'C:\temp\output%DATE:~3,2%%DATE:~0,2%.txt'
If that was run today it would pass in 'C:\temp\output1118.txt
Now in your maxl you just reference the variable with
export database sample.basic level0 data to data_file $1;
the $1 relates to the variable which was passed in, the 1 being the position it was passed in.
Cheers
John
http://john-goodwin.blogspot.com/

How to define Sparse/dense settings through MAXL script ?

Hi,
How to define Sparse/dense settings through MAXL script ?
By default its taking all dimensions as sparse dimension type. I want to define sparse and dense through MAXLand automate everything.
Please help me out or advice me work around.
Thanks,
Rajendra Prasad Gella.

you cannot modify sparse/desne settings directly through MAXL.
The only way you will be able to build/modify/remove dimensions/members through maxl is using rules files.
So if you are building dimensions using rules files, for a new dimension you can specify dimension properties.
in rules file options -> dimension build settings -> dimension definition -> Rules file -> dimensions.
Here you can specify new dimensions and after specifying you can right click and edit properties where you can change various dimension level properties including sparse/dense settings.
And you knw me well (Krishna from Hyd) and so you can call me on my mobile if you need more info.. lol :)
- Krish

Wildcard in MaxL Script??

Can you use a wildcard in a MaxL script to find a file in a specific location?
Example>>
import database app.database data
from local text data_file 'C:\HyperionDataFiles\dataload*.dat'
using rules_file 'C:\hyperion\AnalyticServices\app\app\database\dataload.rul'
to load_buffer with buffer_id 15
on error write to 'C:\hyperionerrors\dataload.err';
In would this find any file with the dataload name?? Ie dataload_today.dat??

You don't mention the operating system, but I would create a single maxl statement to load a file as it's own script. In the script, I would use a variable to represent the file name. Then in the calling batch or shell script, I would find the actual file name and pass it as a parameter to the script. If there are multiple files that match the criteria, I would loop through each file and pass it. (of course, after I was done, I would move the files to a histroy folder so I didn't process them again.

Regarding Maxl Script

Hi Frnds,
I have built an ASO cube and to automate it i have wrote the maxl script
login 'essadmin' 'essadmin' on 'Mer1-essbaset02';
alter system load application dirsal12;
alter application dirsal12 load database dirsal12;
alter application dirsal12 disable connects;
import database dirsal12.dirsal12 dimensions
connect as 'olap_load' identified by 'ol_load' using server rules_file 'timbuild',
connect as 'olap_load' identified by 'ol_load' using server rules_file 'tolldim',
connect as 'olap_load' identified by ol_load' using server rules_file 'misstoll',
connect as 'olap_load' identified by 'ol_load' using server rules_file 'meddim',
connect as 'olap_load' identified by 'ol_load' using server rules_file 'DMAbuild',
connect as 'olap_load' identified by 'ol_load' using server rules_file 'clty_ser',
connect as 'olap_load' identified by 'ol_load' using server rules_file 'weeksatt',
connect as 'olap_load' identified by 'ol_load' using server rules_file 'medatt'
on error append to 'd:\dirsal12\dimbuildlogs\dimbuilds.err';
import database dirsal12.dirsal12 data
connect as 'olap_load' identified by 'ol_load' using server rules_file 'dtload33'
on error write to 'd:\dirsal12\dataload\dataload.err';
alter application dirsal12 Enable connects;
logout;
when i run this maxl script iam ending up with fallowing message
essmsh error : End of file breaks the statement
Please let me know if you find any errors in the script.
Thanks,
Ram.

Over all it does not look bad. If you are calling this from a batch file I would change all of your \ to \\ The backslash character is an escape character and modified the character following it. a double backslash will set the backslash. I would also suggest spooling the contents out to a log file and looking at it. I try things the simple way when they don't work for me. Comment out everything except the logon and logout and see if it works. If it does, then uncomment the next statement and try again. you can also try bringing up maxl interactively and cutting and pasting the statements in one at a time to see what it complains about.

Maxl script STATUS

Hi guys..
Is there a way to check the status of the maxl script executed.
The scenario I am talking about is like this:
A maxl script is being called from a unix script. Is there a way to check if the status of the maxl file executed is Success or Failure.
I am using startmaxl.sh to execute the maxl file. So if there is an error the startmaxl.sh should return 1/Failure. right?
Correct me if I am wrong.

It's worth having a read of Cameron's post of exit codes and error handling in maxl - http://camerons-blog-for-essbase-hackers.blogspot.com/2011/06/no-exit-but-not-in-maxl_9756.html
Cheers
John
http://john-goodwin.blogspot.com/

MaxL script invocation solution?

I need to use maxl script to refresh data. But before doing this I have to call an oracle sql package to do something first like prepare data. After finishing that maxl script I also need to do something else. And furthermore I need to catch exceptions and do some logging. I think the whole process should be in a transaction.
Is there a solution for this?
pure os script? pure oracle script? or a java programe?

There is error handling available in all the solutions suggested.
In case you are using an Oracle package, you can specify the execution to be exited on failure. For the maxl errors you can check the return value of sqlcmd execution in the procedure itself OR you can check for files which the essbase dataload might have created.
In ODI also you can create process flows which can stop execution on failure. In Batch scripts I know there is way to handle errors but I have not implemented it. May be someone else can throw some light on it.
Personally, I would prefer doing everything in Oracle just so that I have only 2 technologies to take care of.
Hope this helps!

MAXL Script to update Member Filters

Hoping someone can point me in the right direction.<BR><BR>I've created a MAXL script which changes the lines on a Member Filter, effectively changing it from a READ to a WRITE. The only problem is after the MAXL script has run the User loses the Filter assigned to them.<BR><BR>Is there any way of getting the Filter to stay with the user.<BR><BR>Many Thanks<BR><BR>Mark

Rosi wrote:
Hello -
Yes. Here is an example of the maxl script -
login 'Hypadmin' '#########' on myessbaseserver;
spool on to 'mymaxl.log';
/* Setting the substitution variable */
alter database appname.databasename set variable 'CurMonth' 'Aug';
display variable all;
spool off;
Logout;
Exit;
You can call this maxl from a batch file scheduled from windows scheduled task.
RegardsThanks very much for your help!

Pre and post load maxl script in ODI

i am trying to call a maxl script in the ODI interface.
i made the following chages in target properties:
PRE_LOAD_MAXL_SCRIPT D:\PLAN\Results\Scripts\ODIpreMaxl.mxl
i got the folloing error message:
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 89, in <module>
     at com.hyperion.odi.essbase.ODIEssbaseConnection.executeMaxl(Unknown Source)
     at com.hyperion.odi.essbase.AbstractEssbaseWriter.beginLoad(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot run program "essmsh": CreateProcess error=2, The system cannot find the file specified
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2457)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:662)
-Raj

John
Yes that was a problem. When I ran plain essmsh, it said 'essmsh' not recognized. However when I ran the whole path D:\Oracle\Middleware\EPMSystem11R1\common\EssbaseRTC-64\11.1.2.0\bin\essmsh, the MAXL prompt came up. I have system environment variable setup in the name of ESSBASEPATH with path as D:\Oracle\Middleware\EPMSystem11R1\common\EssbaseRTC-64\11.1.2.0\. I had a feeling this would take care of the situation.
So how do I get this set up?
Thanks
Raj Nadar

Calling maxl scripts

Similar Messages

Maybe you are looking for