Calling of editable or non editable screens in BPS

Hi All,
I have one requirement in BPS. I need to check some condition and based on the output of this condition i need to call two different screens.
i.e. If condition = yes
          call layout in editable mode.
      If condition = no
          call layout in display mode.

Hi,
  If you can put that condition in a macro, here is the method.
Create only one layout with all fields are editable.
Then write a macro saying that
If condition is false.
disable all the cells from user entry.
Sample code:
If Condition is false
Range(cells(row,column),cells(row1,column1)).disable = True
Endif
This will disable the cells from user entry.
Regards,
Bindu

Similar Messages

  • Custom Validation in ESS Edit Screen

    All,
    We have a requirement in ESS Address screens that all country users should key in only English Data. We are in SAP ESS SP12 and all the Address Components are in WD Java. The validation on all the address screen fields for this requiement has to be handled and give an error message back to the user.
    The Options that I Checked out were:
    1) Handling the Validation through BADI HRPAD00INFTYUI or HRPAD00INFTYBL.
    2) Handling the validation in WD Java layer inside the country spoecific components isConsistent method of the Detail View Component controller
    Which is the best place (ABAP or JAVA) to handle Custom validations on the Edit Screen and give back message to the user? Please suggest if any other better options are available other than the above mentioned ones.
    Regards,
    Nagarajan.

    Hi,
    Both are doable if you are good in java and have NWDI ,handling validations in the wd java layer is easy. If you are good in ABAP you can handle in ABAP.It depends on how you write your code, if you do validations in java and if your validation fails you can show errors to user right away which will reduce your call to backend at isconsitent method for checking the errors.
    Thanks,
    pkv

  • How to remove mandatory field for Last Name in Personal Data Editing Screen

    Hello All,
    CUrrently we are using BP_ ERP5ESS1.31 SP5 & SAP_ESS  603 SP5.
    All my ESS Services are Displaying fine and working from Portal.I am having the requirement like I need to make Last Name as Non-Mandatory field in Personal Data. While Editing the PD Screen, there  i will find the * mark for Last Name filed, i checked through the Global Personalization Make as Mandatory is Not Personalized its showing, i think its defualt prpoerty,so i am unable make any changes from Portal w.r.t Global Personalization.
    I checked in SPRO-- Personal Admin> Custmomizing User Interfaces>Change Screen Modifications, there i find the respective Module pool for those Infotypes and country Specific..
    I cheked forModulePool MP000200--> P0002 and Variable Key-40(For India)  P0002 - NACHIN -- LastName only OF Radio Button is Selected all other Rado buttons are not selected.
    I Checked in V_T588MFPROPS view there for 0002 Infotype P0002 -- NACHN Mandatory check box is Checked all other check boxes are Unchecked.
    How to make that Last Name field as Non-Mandatory in Personal Data Edit Screen, where i need to make the changes.'
    Please list out the Steps..Where i need to do the configuration. And i assigned all the required ESS roles on the backend.
    Thanks in Advance
    Adapag

    Hi,
    I don't think supressing through Global Personalization will change the business logic. Within the Business Logic it checks for the mandatory field.
    After the changes I guess you need to make the changes accordingly.
    The below link might be of some help.
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?spaceKey=profile&title=ESSPersonalInformationUIenhancementwithoutmodification&decorator=printable
    Please correct if I am wrong.
    Cheers-
    Pramod

  • Photoshop Elements 10 Edit Screen won't load

    Photoshop Elements 10  Edit Screen won't load.  It was working fine, then I responded to an Adobe Update. It stopped working. I re-installed Photoshop Elements 10 for MAC from the purchased Disc. The organizer works but not the editor. The organizer is not able to call the Editor either. I have uninstalled and reinstalled twice. I cannot get the editor to load it's editing screen or any images.
    I'm really stuck.

    Go to your username>library>preferences and delete:
    com.adobe.PhotoshopElements.plist
    Adobe Photoshop Elements 10 settings
    Adobe Photoshop Elements 10 paths
    repair permissions and try again.
    Note: In lion, that library is hidden. In the finder, click the Go menu and then hold down the Option key to make it appear.

  • IMovie loads but not to edit screen

    I cannot figure this out.  When I load iMovie 10.0.1 it now opens with a screen that does not allow me to create a new project, or edit existing one.  The page it opens with has LIBRARY and THEATER in the top center, and Import Create and Share on the top left.  This is not the usual editing screen with project and event windows that I used to get.  Ther are very few icons on the page.I am very confused, as I have used the program many times before.
    Please help, this is very frustrating and I am sure it is something simple.
    thanks

    The lower portion is the timeline of your new project, called "My Movie 1." Drag video clips there to build your movie.
    It looks like maybe you have only one event with one clip.
    Are you upgrading from iMovie 9? If so, you should have been asked when first launching iMovie 10 if you wanted to update existing projects and events. If you said "No" you can still do it. Go to File>Update Projects and Events. This will make all your iMovie 9 events available in this new version.

  • Both my iPad and iPhone have ios8 On either device in Calendars edit shared with add person when I enter an email address and press add nothing happens - just goes back to edit screen and what I have entered has gone. No error message or any clue

    Both my iPad and iPhone have ios8
    On either device in Calendars> edit >shared with> add person when I enter an email address and press add nothing happens - just goes back to edit screen and what I have entered has gone. No error message or any clue about why I cant share my calendar. Please help.

    UDPATE:
    Spoke with Express lane, and issue was escalated.  Kudos to the support guys that handled this one (Brian and Yi).  Went through everything in detail and took all the crash dumps off the iphones and ipads to send to engineering.
    After backing up the contacts, the recommendation was to delete all contacts in  iCloud.  Doing that caused my iCloud to crash (in the browser), so more crash dumps were sent to apple.
    Eventually got all contacts deleted, then did a resync.  Looks like IOS devices are coming back to life and syncing again.
    Also, Outlook iCloud connector has just been updated to ver 1.0.1 so i installed that on their recommendation.
    BOTTOM LINE workaround:
    1. Backup contacts
    2. Delete contacts in iCloud
    3. Delete accounts on IOS devices
    4. Recreate accounts on IOS devices.
    Hoping a real root cause can be found and real fix implemented.  This has caused me to doubt the stability of iCloud, so i will procees with caution.

  • Error in Project Coding Mask "Edit screen is "1" too long" Message no. CJ62

    Hi Friend's
    In sandbox already i have Define Special Characters for Projects is as "2"  (Length of key for coding)
    Now when i go for defining Project Coding Mask by making following new entry in the spro
    example "PR     .0000000000.00.00.00.00     Dairy Process Project
    after entering above details system gives following error
    Edit screen is "1" too long
    Message no. CJ627
    How i can resolve this issue.
    Thanks & Regards,
    Sandeep

    Your coding mask is exceeding the limit of 24 characters(including special characters). Reduce some characters to make it 24 or less then 24.
    Edited by: Kuldeep Bidalia on Sep 9, 2010 4:42 PM
    Edited by: Kuldeep Bidalia on Sep 9, 2010 4:43 PM

  • Elements 10, windows 8, 64 bit, epson artisan 835 printer: prints are really dark even after using enhancements like adjusting lighting. Prints are darker than photoshop edit screen. Prints are acceptable using paint, windows photo viewer, or gallery.

    Elements 10, Windows 8, 64 bit, Epson Artisan 835 printer: Prints are really dark even after applying enhancements, like adjusting lighting. Prints are darker than Photoshop Edit Screen. Prints are acceptable using Paint, Windows Photoviewer, or Photo Gallery.

    In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
    That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
    Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
    Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
    While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
    Hunt

  • Missing RAW editing screen in PSE8 Trial version

    Can anyone help me with this one?
    I have previously used PSE6. When opening a RAW image I have first gone through a RAW Editor screen before editting in PSE6. When
    I open a RAW image in the TRIAL version of PSE8 it takes me straight to the PSE Editor, missing out the RAW editing stage. My camera is an Olympus E510, about 2 years old.
    The HELP files clearly show the RAW editing operation so I know the functionality is in PSE8. It seems to assume that the RAW editing screen opens automatically and I can't see what else to do. In desperation I turned on the FILE FORMATS Plug In to see if that would help - it didn't. I need to know there is a RAW Editor that I can use before purchasing the software.
    Adobe have told me that they don't support the Trail version and so won't answer my question...   Not exactly a recommendation of good customer service if their pre sale support is zero!  Their official answer to the above question was that they did not support PSE6 anymore and that I should upgrade to PSE8 Their last suggestion was to ask this group.
    If anyone has PSE8 and is prepared to try a .ORF file for me I'd be very grateful.  Thanks, Keith

    Windows
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4626
    Mac
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4623

  • Issue with Add/Edit screen list values

    Hi,
    I have a requirement in ADF application to list down one table as initial screen. From that screen I can go to add screen or edit screen.
    Currently in adding screen, I am collecting all the data to a backing bean and finally when save is clicked i am transferring value to View programmatically.
    In my add screen i have some fields in list. Some of them are master details list also. They are independent LOV bindings.
    Currently while saving I can access all the values from backing bean, But for list fields I am getting index values only. Due to that I have mapped corresponding attributeValues to get its primary key to save.
    But when i go to edit screen, how to i get and map this index value back to list so that it will show proper value selected, exactly like how it was showing on add screen?
    Regards,
    Santhosh

    You may consider the below suggestion which needs no manual coding for creating new record as opposed to your current way of collecting data into bean and transferring value to view and then saving it.
    a. In add screen page, drop the view object from the data control as ADF Form without navigation buttons
    b. As you want the creation form when the page is loaded, add createInsert method binding to the pagedef and then add invokeAction executable binding to createInsert with refresh mode as renderModel(you can specify refreshCondition too if you want to provide any)
    c. Add Commit as button
    Sireesha

  • My nokia N-70 Music Edition Screen displayed blank...

    Hi
    nokia N-70 Music Edition Screen displayed blank after few hours.After Removing battery,put again & start it becomes ok for few hours.I have already updated the Software Nokia N-70 but no advantage.
    Wht should i do?

    strange enough some of the pre-installed apps on the N70 are on the memory card and not the phone memory. which means formatting the memory card will remove everything. it's difficult to get everything back but try these :
    1- try to find what you need on the n70 support page
    http://europe.nokia.com/A4144775
    check phone software.
    2- if you have the download app installed on your phone , run it and check for the app there.if not check the nokia download store. http://www.download.nokia.com/
    3- if your mamory card is not the original provided with the phone, locate your old memory card. using a computer copy and paste the following folders from the old original one to the new one:
    * resource
    * sys
    * private (copy the subdirectories only and not the whole folder)
    4- if something is still missing after all this, i guess it's gone for good
    Fear not those who argue but those who dodge

  • Iphoto 11 has black edit screen

    My iphoto 11 pictures are not visible in the edit screen and the slideshow will not run.  I've tried everything that I know and I'm at the point of deleteing iPhoto and do a clean install.  However, I'm not clear on the procedures and if I need to purchase iPhoto (it came pre-installed on my mid 2010 macbook pro).  Or should  I need do a clean install on my mountain lion?

    Next move:
    reinstall iPhoto.
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

  • How can I open the editing screen?

    I downloaded the PR app, I can look at the tutorial and upload files.  But I cannot get the editing screen.  Any help is welcome.

    Without system info and a better explanation of what you actually do or even what program you are actually referring to, nobody can help you.
    Mylenium

  • Editing screen goes black after applying Curves in CS6

    I recently updated CS6 and now whenever I try to apply a curves layer, the editing screen turns black.  If I have other photos open I cannot see them either, please help!!

    A first suggestion is to go to your video card's manufacturer's site and see if you have updated drivers for your particular model video card.
    Otherwise, you might have go into Photoshop > Preferences > and set the GPU mode to Basic, or uncheck the GPU function and see if that clears it up.
    Gene

  • Field that is not visible in my editing screen but showing in web preview. How to remove it?

    Hi Support,
    When I preview my form in web preview, I am seeing a field that is not visible in my editing screen. It starts at the left margin of the web preview and runs off the edge of the right side of the page.
    The form is also crashing when I attempt 'page view' or 'save as pdf' and I believe this phantom field is the culprit. I have spent considerable time on the form and do not want to recreate from scratch.
    Can you please advise how I can make this field visible in the editing section so that I can permanently delete it?
    Further information:
    I do not have any rules set for any of my fields
    I have tried to remove it in Chrome, IE and Firefox
    My cache has been cleared today
    My plug-ins and flash player are all current versions (updated today and performed a restart)
    Thanks,
    Kate

    Hi Kate,
    Could you please share your form with me ([email protected]) so that I can investigate and correct this problem? Instructions on sharing can be found here:
    http://forums.adobe.com/docs/DOC-2462
    Thanks,
    Brian

Maybe you are looking for