Calling Report9i from Form6i

Hi,
There is any way to call Reports9i from Forms6i? I have Forms6i+Forms Servser 6i on one machine, and Report9i Server(Service) on another. How can I use Reports9i from Forms6i ? Can it work ?
Thanks,
Trung

Hi,
It should work the same way as it was with Reports 6i Server. In Reports 9i server config file, to need to make it compatibale with 6i version. You need to uncomment the following line in Reports 9i server configuration file from:

to
<compatible version="6i"/>
Now start the Reports 9i server again, This will start a seperate listen through which Reports 9i server can talk to any 6i client.Setting version to 6i enables Reports 6i clients to run under Oracle9iAS. When version is set to 6i, versions earlier than 6i may also run under Oracle9iAS, but they are notcertified to do so and are not supported by Oracle. If you use the compatible element, you must also have an entry for the Reports Server in your tnsnames.ora file, as you would have had for the 6i version of the Reports Server. For example:
testsvr.world = (ADDRESS=
(PROTOCOL=tcp)
(HOST=testhost.us.oracle.com)
(PORT=1949)
Hope this helps!
Thanks,
Rohit

Similar Messages

Error when call javabean from form6i

I try to call javabean from Form6i. I have downlaoded four excample from Oracle Sample Code. But I can't run the example whenever from Form Builder or browser. When I run the html in IE or Natscape browser, I meet a eorror message :
java.lang.NoClassDefFound Error: sun/applet/AppletViewer
I have copy all example classes into e:\orant\forms60\java\oracle\forms\demos\ directory and the jar file copy into e:\orant\forms60\java directory.
Inside the html I set the codebase to e:\orant\forms60\java.
Is there any error or I still need to set some anothers settings?
Help please?
null

Hi Adnan
I have configured my apps similary the example in
\orant\tools\devdem60\web then it rans fine.
Thanks,
Ruy Chicaco.
Adnan Imtiaz (guest) wrote:
: Hi there,
: I'm facing the same problem myself...but mine goes into doing
: something & returns an "Internal Error" message in the
: browser....
: Try running the static HTML file from its directory & see
whether
: that even runs or not....
: Any helpp would be greatly appreciated.....
: Thanks.
: Ruy chicaco (guest) wrote:
: : I have used OAS 4.0.7 with yt40.dll upgraded, NT 4.0
: : SP4 and Developer 6.
: : I have configured application cartridge according Developer6
: : Server doc instructions.
: : When I call fmx from browser Netscape 4.6
: : (http://hostname/webforms?module=fmx_name) the error "Applet
: : oracle.forms.engine.Main class oracle.forms.engine.Main could
: not
: : be loaded".
: : OAS inserts in file \orant\ows\website40\log the message
: : "Parameter module is missing from URL and cartridge settings"
: : Can anybody help me please?.
: : Ruy Chicaco
null

Calling report from form. Need PDF output

I am calling a report from a form using RUN_PRODUCT. I need to display the form in PDF format. When the user clicks the button in the form to run the report, acrobat reader should open up and the report displayed there. Please help.
Thanks

Thanks for the response. The first part worked. I am able to get the output in PDF format. In the 2nd part where I want to open acrobat and display the output, I am having some trouble with the code. When I compile, it says
win_api_environment.read_registry must be declared. Is there some package I need to attach?
Also, in the After reports trigger, how do I pass vFile (I am assuming this is the PDF file name)?
Thanks
The first thing you'll want to do is pass parameters to the report IE DESTYPE, DESNAME and DESFORMAT where these could be FILE, 'c:\temp\report' and PDF.
Then, you can try this piece of code I wrote (with some help from other people at Metalink and here) sometime back. Now, I call it from forms, but in your case, you'd have to run it in the after report trigger. Since with RUN_PRODUCT you don't know when the report is finished, if you did it from the form, it wouldn't work correctly.
PROCEDURE OPEN_PDF(vFile IN VARCHAR2)
IS
vcServerApp varchar2(40);
vcServerTag varchar2(600);
vcCommand varchar2(2000);
iArgPos pls_integer;
dummy NUMBER;
BEGIN
-- 1 get the Server App for .PDF files
vcServerApp := win_api_environment.read_registry('HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\.PDF','',true);
-- 2 get the executable
vcServerTag := 'HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\'||
vcServerApp||'\SHELL\OPEN\COMMAND';
vcCommand:= win_api_environment.read_registry(vcServerTag,'',true);
-- 3 Sort out how to specify the Filename
iArgPos:= instr(vcCommand,'%1');
if iArgPos = 0 then --no substitution Var on the command line
vcCommand := vcCommand||' '||vFile;
else
vcCommand := substr(vcCommand,1,(iArgPos-1))||
vFile||substr(vcCommand,(iArgPos+2));
end if;
-- 4 Run using Winexec (or Host if preferred).
win_api_shell.winexec(vcCommand);
EXCEPTION
when no_data_found then
abortt('Acrobat Reader was not found! Please consult with your help desk to install it and try again.','N');
END;
Chad
I am calling a report from a form using RUN_PRODUCT. I need to display the form in PDF format. When the user clicks the button in the form to run the report, acrobat reader should open up and the report displayed there. Please help.
Thanks

Contact name not showing in call/sms log even when I call/sms from my address book.

Two things have changed on my phone recently.
1. I ran the latest update 4.3.2
2. My phone was not showing all the contacts in my address book that is in my Mobile Me account. Mobile me had 166 contacts. The iPhone 4 had 136. I I unchecked the syncing of my contacts on my phone. This removed all the contacts from my phone. Then I check the syncing options again. All 166 appeared on the phone.
I'm not sure which of the two caused the issue but now anytime someone who calls their name does not appear on the display or log, just their number. I can even call people from my address book and the display shows that I am calling them with their name and photo on display. However, in the call log the name does not show just their number. This applies for text messages. I send a message directly from within the contact card in the address book and in my text log it shows only the number and not the name.
I've turned the phone off and on a couple of times.
I would appreciate any advice.
Cheers

Thanks iraghib,
In the end I reset my phone to factory settings. I created a back up of my address book and ical. Reset the phone and did a sync again. This fixed it all. I didn't need to use the backups but is was nice to know they were there. I felt entering the various passwords for all my installed apps was a much better deal than adding the international area code to the 166 contacts I have in my address book.
Good luck. And thanks for the post.

How can I access my Call Handlers from outside line (outside district)

CISCO VoIP System Info:
Cisco Unity Connection version: 8.6.2ES25.21900-25
CM Admin System version: 8.6.2.21900-5 on C200M2 Servers
Our engineer setup our Call Handlers so that in our to change the recordings on them, you diall 7800 from a phone inside the office, or as he put it in the procedures, from within the district. Once you dial, you need to enter the user code, password, then the extension of the Call Handler, and we have no problems recording/changing any Call Handlers. However, due to possible inclement weather approaching in the next few weeks, I was asked how we cna change them from an outside line (manager's home, etc.). We cannot access from an outside line. 7800 is not a DID, it is simply the extension he assigned to access the call handlers. I even went so far as to setup a dummy phone and forward it to 7800, but this does not work either. It forwards to the extension's voicemail. Is there a way we can access the Call Handlers from an outside line? Any help would be gretaly appreciated. Thank you in advance.

Hey Joseph,
Go Flames ....errrrrrrrrrrrrrrrrrr maybe not so much
What you are trying to get to is really just the Greetings Administrator
conversation and there are multiple ways to get there.
For example, you can set up a Caller Input off any mailbox (Press 1-9) let's say 7 to
go to Conversation> Greetings Administrator. So you could set this on the managers mailbox
and when he calls his own number from home once his greeting
kicks in he can press 7 to link to the Greetings Administrator conversation
or
You could set up a DID DN xxx-xxx-2345 as a CTI-RP and set Call Forward All to reach Unity Connection.
In this case you will need to use the Forwarded Routing Rules = xxx-xxx-2345 route to
Greetings Administrator. Make sure to move this rule to the bottom of the list!!
Cheers!
Rob
"Why do the best things always disappear "
- The Band

Call tcode from alv report and passing group of values

hi all .
i want to call tcode from alv report and passing an internal table or group of values to a selection option of that t code ? how
ex. passing group of GL to fbl3n and display the detials of all .
thank you

Dear,
You have done a small mistake
--> rspar_line-option = 'EQ'.
rspar_line-HIGH = PDATE-HIGH.
u r passing "high" value and in "option u r passing "EQ" so how it will work!!!
So if u r passing only 1 date or more dates like 01.01.2010 , 15.02.2010 , 10.03.2010 then pass
rspar_line-selname = 'SO_BUDAT'.
rspar_line-kind = 'S'.
rspar_line-sign = 'I'.
rspar_line-option = 'EQ'.
rspar_line-LOW = PDATE-HIGH.
APPEND rspar_line TO rspar_tab.
or if u r passing low & high date means in range like 01.01.2010 to 30.01.2010, then pass
rspar_line-selname = 'SO_BUDAT'.
rspar_line-kind = 'S'.
rspar_line-sign = 'I'.
rspar_line-option = 'BT''.
rspar_line-LOW = PDATE-LOW.
rspar_line-HIGH = PDATE-HIGH.
APPEND rspar_line TO rspar_tab.
try above code , hope it helps...
i think u cannot use "call transaction using bdcdata" in ur case bcoz as u said in ur 1st post u want to display the details of all but still if u want to use then u should pass all parameters in loop.
PROGRAM
DYNPRO
DYNBEGIN
FNAM
FVAL
ex:-
LOOP AT GT_TEMP INTO GS_TEMP.
CLEAR bdcdata_wa.
bdcdata_PROGRAM = 'SAPXXXX'.
bdcdata_DYNPRO = '1000'.
bdcdata_DYNBEGIN = 'X'.
bdcdata_wa-fnam = '''.
bdcdata_wa-fval = ''.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_PROGRAM = ''.
bdcdata_DYNPRO = ''.
bdcdata_DYNBEGIN = ''.
bdcdata_wa-fnam = 'SD_SAKNR'.
bdcdata_wa-fval = GS_TEMP-GLACCOUNT.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_PROGRAM = ''.
bdcdata_DYNPRO = ''.
bdcdata_DYNBEGIN = ''.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = 'XXX'.
APPEND bdcdata_wa TO bdcdata_tab.
ENDLOOP.
try above code if u r using call transaction...
Edited by: mihir6666 on Jul 9, 2011 3:10 PM
Edited by: mihir6666 on Jul 9, 2011 3:11 PM
Edited by: mihir6666 on Jul 9, 2011 3:13 PM

I cannot log onto the App Store, the page appears when I call it from the dock or the Apple menu. I can call the log-in box from the menu bar, but on signing in the spinning icon just keeps spinning,(not the beachball). Any suggestions? Using 10.6.7 and u

I cannot log onto the App Store, the page appears when I call it from the dock or the Apple menu and I can call the log-in box from the menu bar, but on signing in the spinning icon just keeps spinning,(not the beachball). Using 10.6.7 and up-to-date on all software. Any suggestions?

Could be a third party app preventing you from being able to login.
Mac App Store: Sign in sheet does not appear, or does not accept typed text
If it's not a third party issue, follow the instructions here.
Quit the MAS if it's open.
Open a Finder window. Select your Home folder in the Sidebar on the left then open the Library folder then the Caches folder.
Move the com.apple.appstore and the com.apple.storeagent files from the Caches folder to the Trash
From the same Library folder open the Preferences folder.
Move these files Preferences folder to the Trash: com.apple.appstore.plist and com.apple.storeagent.plist
Same Library folder open the Cookies folder. Move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Relaunch the MAS.

Calling Report from Menu (Oracle Forms 10g)

We have the applications in Forms6i & Reports 6i (Client Server) and migrating to Forms 10g and Reports 10g. We have the menu, from that menu we are calling all the forms and Reports. For especially Reports earlier we user RUN_PRODUCT but now 10g it is not working. How can call the report using RUN_REPORT_OBJECT
Important things we have some dynamic parameters (input) to the each report. That means when i called the report from the menu i need to get first parameter form to take the parameters and then can be run the report.

Here is the code to call report from menu in 10g
DECLARE
pl_id ParamList;
repid REPORT_OBJECT;
v_rep varchar2(100);
v_server VARCHAR2(100);
rep_status varchar2(100);
v_host VARCHAR2(100);
BEGIN
     select rep_server into v_server from reports_data;
     select machine into v_host from reports_data;
pl_id := Get_Parameter_List('tmpdata');
     IF NOT Id_Null(pl_id) THEN
     Destroy_Parameter_List( pl_id );
     END IF;
     pl_id := Create_Parameter_List('tmpdata');
Add_Parameter(pl_id,'P_C_CODE',TEXT_PARAMETER,:GLOBAL.COMPANY);
Add_Parameter(pl_id,'P_B_CODE',TEXT_PARAMETER,:GLOBAL.BRANCH);
     repid := find_report_object('REPORTOBJ');
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,getpath||'E_VOUCHER_ENTRY.RDF');
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'htmlcss');
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,v_server);
          v_rep := RUN_REPORT_OBJECT(repid, pl_id);
          rep_status := REPORT_OBJECT_STATUS(v_rep);
          WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
               LOOP
                    rep_status := report_object_status(v_rep);
                         message('Running');
               END LOOP;
          IF rep_status = 'FINISHED' or rep_status is NULL THEN
               --Display report in the browser
               WEB.SHOW_DOCUMENT('http://'||v_host||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_server,'_blank');
          ELSE
               null;
     END IF;
END;

Want to call transactions from ALV list output

Hi Guru's,
I have a report which displays Open PR's, open PO's n their details with respect to material. wat i want to do is call transactions from this out put i.e i want a interactive output. if i click on particular PR i want the system to call that PR screen. how can i do this?? Plz help.

REFER THIS
EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
I_CALLBACK_PROGRAM             = ' '
I_CALLBACK_PF_STATUS_SET       = ' '
I_CALLBACK_USER_COMMAND        = 'USER_COMMAND '
I_STRUCTURE_NAME               =
IS_LAYOUT                      =
IT_FIELDCAT                    =
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
I_SAVE                         = ' '
IS_VARIANT                     =
IT_EVENTS                      =
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IR_SALV_LIST_ADAPTER           =
IT_EXCEPT_QINFO                =
I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
EXCEPTIONS
PROGRAM_ERROR                  = 1
OTHERS                         = 2
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
TABLES
    T_OUTTAB                       =
IF SY-SUBRC <> 0.
ENDIF.
AND THEN
                 rs_lineinfo type slis_lineinfo.
FORM user_command5 USING r_ucomm LIKE sy-ucomm
                  rs_selfield TYPE slis_selfield.
data : lv_date type char4.
CLEAR : LV_DATE .
CASE r_ucomm.
WHEN '&IC1'.
      IF rs_selfield-fieldname = 'BELNR'.
    read table it_e into wa_e index rs_selfield-tabindex.
    if sy-subrc = 0.
    lv_date = wa_e-budat(4).
    endif.
    SET PARAMETER ID 'BLN' FIELD rs_selfield-value.
    SET PARAMETER ID 'BUK' FIELD s_bukrs-low.
    SET PARAMETER ID 'GJR' FIELD lv_date.
    call TRANsaction 'FB03' AND SKIP FIRST SCREEN.
    endif.
    ENDCASE.
ENDFORM. "user_comm

How to call servlet from jsp

i m trying to call it from jsp using
<a href="../purchaseP?orderno=<%=pno%>"><%=pno%></a>
but its giving error..
type Status report
message HTTP method GET is not supported by this URL
description The specified HTTP method is not allowed for the requested resource (HTTP method GET is not supported by this URL).

i m trying to call it from jsp using
<a href="../purchaseP?orderno=<%=pno%>"><%=pno%></a>
but its giving error..
type Status report
message HTTP method GET is not supported by this URL
description The specified HTTP method is not allowed
for the requested resource (HTTP method GET is not
supported by this URL).Are you implementing the doGet or doPost method in your servlet? If you are calling from a hyperlink then it needs to be implementing the GET method. To access the POST method use a html form.

Calling Report from Oracle form 11g

I am new to Forms 11g, trying to call report from Oracle forms 11g .
I want to call report from oracle forms, but its giving error.
Below is the code
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('empreport'); -- report node in forms builder
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, BATCH);
set_report_object_property ( repid, report_filename, 'empreport.rdf' ); -- report name
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'RptSvr'); -- report server name
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if
rep_status = 'FINISHED'
then
WEB.SHOW_DOCUMENT('http://inorasrv-pc:7001/reports/dtd/rwservlet/getjobid='||v_rep||'?server='||'RptSvr','_blank');
else
message ( 'error while running reports-object ' || error_text );
message ( ' ' );
clear_message;
end if;
end;
Above code giving following error :
Unable to connect to report server RptSvr
I think my report servername is wrong
Where to find report server name in 11g.
I am Using weblogic server, so can i give weblogic server name
Thanks in advance.
Edited by: parapr on Aug 17, 2012 1:52 AM
Edited by: parapr on Aug 17, 2012 3:21 AM

Hi,
You have to have the report server
a. Installed and configured
b. Running.
See
http://docs.oracle.com/cd/E21764_01/bi.1111/b32121/pbr_strt001.htm
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_verify004.htm
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_conf003.htm#i1007341
If you are using rwservlet then you will find the name from the Configuration file referred to in the last link.
Cheers,

Getting rep-3002 when calling report from form on web

i am getting rep-3002 when i call report from a form on web environment. Report is in character mode. It is coming proper if i change it to bitmap. but my requirement is of character mode. pl. give some solution.

Hello,
If you are running in WinNT/2000 environment, the NT/2000 user which runs the Report Server service must have a printer defined. In the control panel, look at the properties for the Report Server to see what user it runs as. Log in as that user and make sure a default printer is defined.
Regards,
The Oracle Reports Team --skw

Calling Report From Form To Many Destinations

Hi
I am calling reports from forms using SET_REPORT_OBJECT_PROPERTY and then run_report_object.
I dont know the destination until runtime of the report which is ok as I can pass this in via my procedure, but if that destination is many ie mail and file what is the best way to distribute the report?
I could call my procedure for each destination but that seems a bit unefficient since the report would be created many times, is there another way?

what about adding a drop-down-list near your report-button where you can choose the destination?
when you click the report-button you simply read the value selected in the drop-down-list and send it to your reports-server too.

Calling report from form in Web environment

Hi,
We are in the process of migrating our C/S appication (developed in Developer2k) to intranet using OAS. My question :
a) Is there any other way to call report from a form other than web.show_document?
b) When a report is called from the report server(using web.show_document), a log-in screen comes up unless the login and password is passed as parameter. Only problem with this is the password shows in the URL. Is there any other way to make the call so that the login & password does not show and the user won't have to login a second time to run the report?
Any reply would be appreciated..Thanks

1. Yes you can use run_product package procedure to call reports on web, Oracle documentation says that run_product command will run in web env.
2. Yes you can hide username & password from user, it depends on which method you are using to call reports, if you are using web cgi then add username & password in file "cgicmd.dat" and "oascmd.dat" for web catridge or in cartridge parameter setting you will find this files in directory "\orant\report60\server\".
Darshan Desai
[email protected]
null

Calling Report from Form Error ORA-06508

Dear all,
I want migrate from Fom6i to Oracle Developer Suite 10g (10.1).
Folder Form = C:\APLIORA\IRS\FORM
Folder Report = C:\APLIORA\IRS\REPORT
I have modified file DEFAULT.ENV
FORMS_PATH=C:\APLIORA\IRS\FORM;C:\APLIORA\IRS\REPORT
i do not have problem call a form from form.
but when i call report from form show error ORA-06508 : PL/SQL : could not find program unit being called ; -6508
my procedure is
PROCEDURE Call_Report IS
     list_id ParamList;
BEGIN
list_id := Get_Parameter_List('input_params');
IF NOT Id_Null(list_id) THEN
Destroy_Parameter_List(list_id);
END IF;
list_id := Create_Parameter_List('input_params');
Add_Parameter(list_id,'MAXIMIZE',TEXT_PARAMETER,'YES');
Add_Parameter(list_id,'ORACLE_SHUTDOWN',TEXT_PARAMETER,'YES');
RP2RRO.RP2RRO_RUN_PRODUCT(REPORTS,'TESTREPORT.REP',SYNCHRONOUS,RUNTIME,FILESYSTEM,list_id,null);
END ;
Do I miss something ?
Can any one help ?
Thanks

Hi,
Thank you for your replay.
The problem have solved.
This my step :
1. Install Windows XP SP2 and Form 10.1.2.0.2 on new pc.
2. Install Jinit version 1.3.1.28.
3. Create report server
3. Compile form, report and pll
4. call report from from with this procedure :
PROCEDURE Call_Report (vFILENAME varchar2) IS
report_id                Report_Object;
ReportServerJob VARCHAR2(100);
vc_rep_status      VARCHAR2(100);
repsvr                          varchar2(21) := 'myserv';
userid                         VARCHAR2(100);
pass                          VARCHAR2(100);
Host                    VARCHAR2(100);
BEGIN
userid          := Get_Application_Property(USERNAME) ;
pass          := Get_Application_Property(PASSWORD) ;
Host          := Get_Application_Property(CONNECT_STRING) ;
report_id:= find_report_object('REPORT');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME,vFILENAME||'.jsp');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,repsvr);
ReportServerJob:=run_report_object(report_id);
vc_rep_status := REPORT_OBJECT_STATUS(ReportServerJob);
WHILE vc_rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED', null)
LOOP
vc_rep_status:=REPORT_OBJECT_STATUS(ReportServerJob);
END LOOP;
IF vc_rep_status='FINISHED' THEN
WEB.SHOW_DOCUMENT('/reports/rwservlet?report='||vFILENAME||'.jsp'||'&userid='||userid||'/'||pass||'@'||Host||'&destype=CACHE&desformat=PDF&paramform=yes','_blank');
ELSE
message ('Report failed with error message '|| vc_rep_status);
END IF;
END;
Ok, but i have another strange error. I will post new thread.
Thank you and regards
Teguh S

Calling Report9i from Form6i

Similar Messages

Maybe you are looking for