Calling SO10 text into script

hi experts,
i have created a text in SO10 with
text name : ZTEST
LANGUAGE : EN
TEXT ID : ST
TEXT OBJECT : TEXT
USER NEED A EDITABLE TEXT IOPTION AND I HAV CREATED IT .
NOW I AM CALLING IT IN THE SCRIPT BY USING THE SYNTAX
INCLUDE TEXTNAME ZTEST OBJECT TEXT ID ST LANGUAGE EN
BUT IT IS NOT PRINTING ,...WHAT IS THE PBLM ....

Hi,
You can insert standard text(Transaction SO10) in SAPscript as following:
Go to editor of SAPscript form
Select menu Insert -> Text -> Standard
Input text object.
Select when you already input text object detail. System will automatically insert statement for including text object to SAPscript form.

Similar Messages

Calling standard text to script

Hi,
I created standard text using so10. How can I call this text to my script program??
Is there any other way to acheive this??
Thanks,
Ravindra

Hi Ravindra,
By using INCLUDE command you can insert the standard text in script editor.
please go throught the help command for include command and it will explain you in detail.
One more thing regarding that,when you have to transport your request to QA system, you have to include the standard text in your request otherwise your standard text will not be visible in the QA.
To include your standard text to your request in DEU, run program RSTXTRAN.
Regards,
Tarun

Calling long text in script

Hi everyone,
can any one say the function module used to call the long text in scripts.

Hi
You can use read_text function module
Important thing to notice while using READ_TEXT is that
TEXT-ID field needs to be properly created based on Order number, Item no, Slaes Org, Distribution channel etc.
Most of the time You will find that Sales organization field is of 4 characters lenght, (Say 0001) in this case Since SAP discards first 3 zeroes of the number to blank spaces, you need to append zeroes to the final text-id field making it of required 20 characters key field (Say).
Therefore, you need to take care of append zeroes, shift spaces, concatenate command, etc. which depends on your scenario.
you have to check the following parameters
ID: this textid
language:language u maintained the text,this also important
name: The no in which text-id is maintained
Usually we make mistake here,the no is combination of purchase order no and item no.
Example:420000210000010(Puchase orderno:4200002100 item no:00010)
Object:it change based on the text-id so u can check it the document no.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = p_var
language = g_f_langu
name = g_f_tdname
object = g_f_obj
TABLES
lines = g_t_lines
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Hope this definitely help.
Regards
- Atul

Scripting text into a portfolio's welcome screen during batch

Hello,
I'm curious to find out if theres a way to insert text into a PDF Portfolio's welcome screen during a batch process with a script? I'd like to not do it individually for several hundred documents if possible.
DM

Thanks,
and to clarify I meant that I am looking to script text into a portfolio's welcome screen text field. A bit of a critical oversight on my behalf.
D

HT2488 How to I insert text into a this command in automator wine "Text goes here" this is a perl script

I have spent hours trying to figure this out, automator is the hardest thing to figure out. All I want to do is emulate me doing this
-Open terminal
-type wine
-drag and drop the location of an .exe file
-hit enter
Now this should be easy as all I have to do is do run shell script, insert argument and done, BUT IT DOESNT RECOGNIZE WINE!?!?! Pleas help me.
Let me clarify.
If I make an automator application that that runs the command "wine" and then inserts text into the space after that Then i will be set. But no matter what I do nothing works. If i set the shell to perl and pass input as argument....It doesnt work the $f and $@ stuff doesnt work.
Wine is likely not recognized because is is pearl based so I set it to pearl, but how do i pass and argument over to it?

Try
/opt/local/bin/wine "$@"
The "..." will protect the white space, but still allow $variable subsitutions.
The $@ will substitute all the files you drag as a group to your Automator app.
The notation "$@" does the substitution with each file properly quoted to protect the white space in the file path, but provide each file as its own quoted argument to the 'wine' command line.
If you need to invoke 'wine' once for each file of a group of files you drag on to your automator app, then use
for f in "$@"
do
/opt/local/bin/wine "$f"
done
This will loop through each file of a group of files you drag onto your automator app, and invoke 'wine' once for each file in the group.

Copying a standard text into another text in so10

Hello Gurus,
I have an issue where i need to track offer letter,i have a standard text which is been automatically used in pb40 while generating offer letter and that is ww-offer-contract in which i need to change the code ( in textid palt )but it is read only document. i need to copy the text into another text.So that i can do the changes required in that.
If i go with Utilities-->copy from client then it is allowing me to copy but not allowing me to change into it.it is giving me the dump.Since it is asking for the permission,i went for stop protection.but still it is giving me the dump.
Any one plzz help me out with this.
Thank you all.
Edited by: BHAVANI MADIREDDY on Feb 12, 2008 12:34 PM

There is a selection screen parameter
parameters: par_bi like rfpdo1-f100buch default ' '.
Comment this and declare a variable and pass 'X' or space into that as per the requirement.

Location of standard text in scripts

hi,
        where will be the standard text in script?
regards,
bbr.

SO10 is the T-code.
You can call the FM Read_text.
you should pass the below values to FM
    id                            =
    language                      =
    name                          =
    object                        =
tables
    lines                         =.
Regards,
Rajasekhar Reddy.

Combuter boots into script mode! How do I perform regular start up?

I was on my computer (ibook G4) when the screen went black. It was still lit, but completely black. After closing it and opening it a few times, nothing changed, so I turned it off.
When I booted it back up again, it booted into the manual, black screen, white text script
mode, and I can't get out of it. All it says is :/ root #
After others did internet research for me and called Apple tech support (who weren't very helpful), these are the things I've tried that haven't worked:
typing /bin/fsck -fy after the :/ root#
(it ended up saying the HD volume was okay, and then i typed reboot, and it rebooted into
script mode still)
I also held down the following just after hitting the power button
to turn the computer on:
x
command
command + s
command + v
command + option + p + r (this is the only one that made the start up sound happen twice, but it still booted into script mode)
Every attempt either brought be to the :/root# screen again, or gave me more white text without ever helping me boot to my normal desktop. I've tried typing exit and reboot after the attempts, but to no avail.
I am from the US, but in Italy for the time being, and this is my only form of communication so I am panicking a little bit right now. This also means I DO NOT have my start up disk with me. Any help would be seriously appreciated.
-marissa

Put the disk in the computer and restart while holding the C key down. You pretend you want to reinstall the OS and go through the first two steps, until the screen just after the language selectiion screen.
On this screen you will see a menu bar. Click Utilities in the menu bar, and select Disk Utility. When DU is up and running, do this:
In the list at the left, select your start up disk- the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
Click First Aid.
If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
Click Repair Disk.
When the repair is completed, quit DU and restart the computer.

I get this message when trying to past simple text into an e-mail document. The Web-Based Email plugin has crashed. I have run out of options...please help.

The Web-Based Email plugin has crashed. I get this message when trying to paste simple text into an email document. I have updated plugins and have run out of options. If I use another browser I have no problem. Please advise.

UPDATE
Compiling from command line I found out that the class definition for oracle.oats.scripting.modules.basic.api.IteratingVUserScript is missing. Do you know what .jar file contains this class?
Thanks.
Fede.

Can you enter text into "info" pop-up window for TV Shows?

It's not a big deal, but I was just wondering if there is a way (a script perhaps) of entering text into the little "info" pop-up window for TV Shows in iTunes? (You know the one...it pops-up when you click on the little "i" in the description box on the TV Shows main playlist)
The show files I made myself have blank info windows of course and it would be nice to be able to enter a decent length description of the episode (the character limit in the "Description" box is so short).
Like I said, it's not a big deal, but it would be nice to be able to enter info in there...so if anybody knows how...please let me know.
Yhanx a lot!

Thank you very much for your reply! I will definitely pass this along to the IT department! Smiling now!

High bill with unusual calls and texts from non-functioning numbers?

We have a family share plan with 3 phones, one phone for my husband and two phones for our employees. Our usual phone bill runs around $150. Our last bill was over $600, the majority charges being on one of our employee's lines. This particular employee has been with us for over 10 years, and has always been extremely trustworthy and very frugal in his usage of his phone to make personal calls (very infrequent and always less than 5 minutes in duration, unless made during the free nights and weekends timeframe). Our latest bill showed over 1,000 texts to/from his phone, as well as over 3,000 peak calling minutes (both to/from his phone) alone. Many of the peak calls are lengthy in duration (30+ minutes, up to 120 minutes). I realize this post is long, so will divide it into headings so that it makes more sense:
Information on usage:
Our employee insists that he did not make these calls and texts (he does not even know how to text), and what is odd about the numbers that appear on the detail (both text and voice) is that they fit into one of two categories:
1. There are calls to two particular non-local area code numbers (and possibly bogus, as they have area codes 523 and 352(?)). When I call the two numbers, I get the following messages:
From my landline: When called from my landline, adding a "1" before the 10 digit number, I get the recording stating that "your number cannot be completed as dialed, please check the number and dial again"
From a cell number- When calling from my own VZW phone (on separate account from husband's), I get a VZW message that the number "has been changed, disconnected or is no longer in service"
2. They are local area code numbers, but when I call the number, I get a recording asking me to enter my pin number (in other words, they are numbers that cannot receive incoming calls, but according to our bill, have not only made calls to our employee's phone, but also received calls. I have done an online lookup on these numbers and they are all cell phones.
3. When I have tried to text the non-local numbers from my VZW phone, I get messages back stating that these are landline numbers and cannot be texted; when I text the local numbers, I have texted a generic message along the lines of "I can't reach you on the phone. Please call me as soon as you can" but I do not receive a call back.
We cannot speak directly with our employee right now (he is in Mexico to pick up his elderly grandmother), nor can we access our employee's phone to check the log, call history, etc. because he has the phone with him. Due to this, when we discovered the high usage, we immediately "suspended" the phone line so that no calls could be made or received. Subsequent to suspending the line, we have talked to his family a couple of times -- one time he happened to call them on another line, so we talked to him "indirectly" through a family member on another line with him. He was alarmed about the calls and insists he did not make them.
He does have children but they are forbidden (by him) from using the phone, and he states that he always keeps the phone in a case on his hip, thus no one else has access to the phone. To go even further, it seems that most all of the calls to these unusual numbers are made on weekdays, during school hours, so I feel sure the calls were not made by his kids.
Calls to Verizon: When we first called Verizon, they suggested we suspend the phone until we could speak to our employee. Subsequent to our indirect conversation with him mentioned above, we called them back and told them he stated that he did not make the calls nor send the texts, and that we believed the phone might have been compromised, cloned, hijacked or whatever. First, the customer svc rep looked at our account and suggested that we put an unlimited text on the phone for the current unbilled usage (there were a lot of texts, and we have no text plan on the employee's phone), and then remove that plan once we get to the bottom of this matter.
Due to our concern about fraudulent usage, the customer svc. rep called the fraud dept. while my husband was holding on the line. She came back on the line and told my husband that the fraud dept. said that "it cannot be fraud because if it was, there would be thousands of dollars in international long distance to countries like Pakistan and India." (WTH?) Also, she said that it couldn't be fraud "because texts were sent to and from the telephone number so we know it was your phone." (another WTH?)
She then went on to say that it looks like texts were sent to international numbers (???) recently (these same 523 and 352 area code numbers I referred to above). Number one, if these were international texts, it seems odd to me that these texts show up on our billed and unbilled activity as "domestic text" and there is no premium charge assessed to our account for international texts. Number two, if these numbers were international numbers, I imagine that we would be charged for outgoing international calls, which we were not. Further, I imagine that the numbers would be displayed on our bill in other than a ten digit format, but am not sure, as no one has ever made an international call or text on our phone.
Next steps:
Does anyone have advice for the next steps we should take and how we can get to someone in customer service who can actually help us with this problem, instead of what we experienced on our previous call? Can we demand that Verizon launch an investigation through its fraud department on the activity on this phone, or is this at the discretion of VZW to launch an investigation? I am unsure, since this was not given as an option by the customer service rep...
If we can get Verizon to launch an investigation, is payment of the portion of the bill with the unusual and disputed usage (namely, that which is over and above the usual usage) waived pending the investigation results, or will we have to pay the entire bill to both avoid having the phones turned off, as well as any detrimental effects to our credit? We've been hit hard by the economy, both personally (I am out of work right now) and business wise (my husband's business has been doing only about 25% of its usual business), and we don't have the extra $$ for the bill unless we take it out of our grocery budget.
If anyone has any insight, suggestions or otherwise, I sure would appreciate it. Sorry for the lengthy first post, but I thought it would be helpful to outline as much about the situation as I could in order that people could respond. Thanks in advance!

kbinga,
I know this is a confusing and frustrating situation for you. I would be happy to review the account in detail to see what is happening with the usage and charges to ensure it does not continue to be a problem for you. Please send me a direct message for further support assistance.
Thank you!
AdamE_VZW
Follow us at @VZWSupport

How to call a text editor from a module pool program

Hi All,
I want to call the text editor from my modulepool program. Enter my text in it and save it.This text needs to be saved in a Z-program with 2 fields as primary keys. The next time while I call this same record from this z table, I need to fetch the existing text and display it.
The user now can put in additional text and can again save it. This process thus goes on..
If anyone has worked in this type of scenario, then please help me in doing this.
Useful answers will surely be rewarded.
Thanks,
Susanth.

Hi Sushanth,
We save the text not as fields in a ztable directly but as a text.Please check the format below since it is based on a working code....
first you need to create a text in s010 transaction...
there should be some key based on which you plan to save the text..imagine it is Purchase order then..PO+item numner is always unique.eg:0090010(900PO/item10).so in the code you can append these two and they will be unique..so you can always retrieve them,overwrite,save them anytime you need
**************data declarations
TYPES: BEGIN OF TY_EDITOR,
EDIT(254) TYPE C,
END OF TY_EDITOR.
data: int_line type table of tline with header line.
data: gw_thead like thead.
data: int_table type standard table of ty_editor.
****************fill header..from SO10 t-code..when you save you need the unique key..youfill it here and pass it in save_text function module
GW_THEAD-TDNAME = loc_nam. " unique key for the text -> our unique key to identify the text
GW_THEAD-TDID = 'ST'. " Text ID from SO10
GW_THEAD-TDSPRAS = SY-LANGU. "current language
GW_THEAD-TDOBJECT = 'ZXXX'. "name of the text object created in SO10
*To Read from Container and get data to int_table
CALL METHOD EDITOR ->GET_TEXT_AS_R3TABLE
IMPORTING
TABLE = int_table
EXCEPTIONS
ERROR_DP = 1
ERROR_CNTL_CALL_METHOD = 2
ERROR_DP_CREATE = 3
POTENTIAL_DATA_LOSS = 4
others = 5.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop data from int_table and save to int_line-tdline appending it.
*save the text
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
HEADER = GW_THEAD
TABLES
LINES = InT_LINE
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
OBJECT = 4
OTHERS = 5.
IF SY-SUBRC 0.
ENDIF.
*To pass to Container
CALL METHOD EDITOR ->SET_TEXT
hope that the above sample with helps you solve the problem
Please check and revert,
Reward if helpful
Regards
Byju

Full bars can't make or receive calls or texts at home.

Just about 25 days back with Verizon and my iphone says I have full bars yet and can't make or receive a call or text from my house this started this week same issue with my moms razr phone as well. I sent the support email a message love the well get back to you in 24hrs. Well 24hrs passed I called nice girl answered I explained I already did the *228 and that I actually did a hard master reset wiped the phone and settings clean updated the IOS to 4.2.10 then something about the phones software I guess I'm running 1.0.5 or something old she tells me I should have received a text on how to upgrade I told her the only texts I received from Verizon were my bill is due and another thanking me for my payment. We went through toggling stuff off and on for about 30 mins and testing outbound calls to #832 I put it on speaker told her its saying calling and call failed over and over again then she said she thinks she sees the problem but doesn't have access to fix it and needs to put me on hold. She picked back up conferenced the call and I went over steps taken with the gentleman I explained that when I was on hold I got flooded with SMS texts so it was going to work now that's the only way I know when I have service is when every text sent to me comes rushing in at once. He then checked to see if calls I made were hitting the server I provided numerous telephone numbers I attempted to call that failed I explained my mother is having exact issue and another friend that was in my area of Friday provided the other people having issues cell numbers and I was told a tech would look into it in 4 days I made sure I asked for network ticket #. Initially I thought this was only happening at night but today I attempted calls in the am same thing. The reps were very nice. Just under 30days back and so far not so good I've had them in the past never an issue my mom and dad past 9 years never an issue until recently. Anyone else in Massachusetts having this issue. I don't want to leave Verizon because generally there coverage is better in New England then the others I've tried in past 3 years.

It sound more like a capacity problem on your local mobile phone cell site, especially the system busy message. Have you tried your mobile phone at a different location, on a different cell site?
How is it that you are posting your messages from a mobile phone, is it a different mobile you are using?
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Import text into a form from a tab delimited file using an action

Good evening.
I am using Adobe Acrobat XI Pro
I have been working all weekend so far on this, and have tried many options.
What I am wanting is to import a line of data from an excel file into a form, save the file with a name drived from the form fields, close the new file, then go back to the original file, import a line of data, and so on and so on.
I had all of this working in livecyle with a tool, but now that we are going to Windows 8 and Microsoft Office 2013, the driver that I need to load the excel file into the form is not available--so now I have to redo the forms in Adobe and import using a tab delimited file.
I would like to do this with an action.
Thus far, I have the following.
**Credit goes to George Johnson who helped me with the script to save the file using field names a few months ago**
To start, I have a folder level script
mySaveAs = app.trustPropagatorFunction(function(doc,path)
app.beginPriv();
var myDoc = event.target;
myDoc.saveAs(path);
app.endPriv();
myTrustedSpecialTaskFunc = app.trustedFunction(function(doc,path)
//privileged and/or non-privileged code above
app.beginPriv();
mySaveAs(doc, path);
app.endPriv
//Privileged and/or non-privileged code below
For the Action, I start with the Form file loaded
Then I execute a javascript to import the text into the file.
this.importTextData("/c/data/clerical.txt");
The next step is to save the file using field names as part of the file name
--credit goes to George Johnson who assisted me with this on a similar project a few months ago.
//Get the Field Value
var fn=getField("Last").valueAsString + "-" + getField("First").valueAsString;
//Specify the folder
var fldr = "/c/data/";
//Determine the full path
var fp=fldr + fn + ".pdf";
//save the file
myTrustedSpecialTaskFunc(this, fp);
That is as far as I have gotten.
What I want to do now is load the original form file, import the next line into the form, save the file, repeat.
If anyone could assist me, I would greatly appreciate it.
**note I had to type this from my I-pad because I kept getting kicked off the internet from my computer. I hope my code is typed correctly.

George
Thank you so much for your response.
Yes--there are multiple lines in the data file--it will vary from month to month. It looks like from what you are saying is that I need to do the global variable since it will constantly change, and then increment it as it goes through the text file. When it reaches the end, then it will stop.
I looked at the following links--but this is from Adobe 9 API--I don't know if things have changed with XI--especially since 9 used batch processing and XI has actions.
Count PDF Files
http://help.adobe.com/livedocs/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/wwhelp/wwhimpl/js/html/ wwhelp.htm?href=JS_API_AcroJS.88.1.html
Global counter
http://help.adobe.com/livedocs/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/wwhelp/wwhimpl/js/html/ wwhelp.htm?href=JS_API_AcroJS.88.1.html
I am not exactly sure how to include this in my code.
If you could point me in the right direction, I would appreciate it.

Inserting text into a field at the current cursor position

Does anyone know how to insert text into a field at the current cursor position? I would like it to work similar to the Syntax Palette in Forms. I cannot figure out how to retrieve the current cursor position in order to manipulate the text.
Any help would be great.
Thanks.

Hi,
If the button and the textfield are on in the same subform then this code should work in the click event of the button
(This is JavaScript code so make sure the code is set to JavaScript and Client on the drop downs in the script window)
(assuming the name of the textfield is TextField1)
TextField1.rawValue = "some value";
If they are in different subforms then you have 2 options
Please note in both these options it is easier if the subforms have names ( I am assuming this to keep samples simple)
option 1 -
use the parent object to move up the tree till you are at the same level as that of the subform that contains the textfield
e.g.
(Click Event of the button)
this.parent.subformname.TextField1.rawValue = "some value";
option 2 -
Use the resolve node to make your way down from the top level of the form
xfa.resolveNode ("form1.subformname.TextField1").rawValue = "some value";
Hope this helps
Malcolm
p.s. I am making assumptions as the image/file you attached did not appear for me.

Calling SO10 text into script

Similar Messages

Maybe you are looking for