Calling Spool while running in Foreground

Hi,
If I run a classical report in background, the output of this automatically goes to the Spool, which I can see using SP01/SP02.
But, the user wants to send the output of the report while running in Foreground too.
Customer's Says: "in the foreground, the user must be prompted to send the output to the spool".
Please help me with the logic.
Thanks in advance,
Ishaq.

Hi,
I have tried your code for generating spool in foreground(below). The spool no gets generated but I am not getting the data in spool.
NEW-PAGE PRINT ON
        LINE-SIZE 220
        IMMEDIATELY 'X'
        KEEP IN SPOOL 'X'
        NEW LIST IDENTIFICATION 'X'
        NO DIALOG.
        PERFORM header.
        PERFORM output USING wa_final.
        NEW-PAGE PRINT OFF.
Then after I have to send mail with a PDF attachment.
Please suggest.
Regards,
Binay.

Similar Messages

Back ground ( Call Transaction) while running locking Tcode

When iam running Call Transaction in background , suppose other user open ( it is giving popup like another user locked) transaction at that time i am getting created records sucessfully even it is not running Call trransaction can any body help me out.

HI,
when ever you are program is running that transaction for a specific order and other user tries to access this transaction and opens the same order it will give this error.
Thanks
Mahesh

Field not getting updated in BDC while running in background

Hi Friends,
I'm executing a BDC transaction to update the Alternate Tax Classification (VBAK_TAXK1) field in Sales Order. I'm passing value 1 to the field and then saving it directly. While running the BDC in background, the field is not getting updated. On the other hand i checked it running in foreground, the field got updated without any error message.
Can anybody help me advicing why the field is not getting updated in background?
Thanks,
Bestin

Hi ,
Check the the log if you are using a session method and if call transaction then capture the messages for the same,
Because in the foreground the BDC will update the records even if there is a warning message nut in background it will not update. So check the data which you are inserting and try avoid the warning messages also so that it can run smoothly in backfround.
Thanks & Regards
Jyo

Problem with the ABAP List output while running program in background.

Hi ,
This is Sudhir S . I am trying to run a report in background which has 60 columns , but only 13 are displayed when we view it through the spool abap list .
But when I run in foreground all the 60 columns are displayed. Since the data which I am trying to fetch is large I am running the report as a background job .
I just need to know what can be done to get the 60 columns in spool abap list output.
waiting for your reply.
<removed by moderator>
With Regards
Sudhir S
Edited by: Thomas Zloch on Oct 6, 2010 1:51 PM - please do something else while waiting, all posts have the same priority here

Hi,
Check if SAP note 1226758 resolves this problem.
Regards,
Aidan

Passing a message while running in background between two different program

Hi all,
I am calling a report program(say Y) from another program (say X).
I want to pass a message from Y to X and i want to print that meesage in program X in the screen ,if X runs in foreground and if the program X runs in background i want to print that message in spool .
i tried by using a subroutine ie by passing the message to the calling program ..PERFORM f_print_msg in program ZCTE0012_CR_MARK_RELEASE USING lv_msg but how will i catch there.since this is a job i am getting some job related error too'....please help in solving this issue

Hi Hemavathi,
the only think that I can think of now is inserting that message in a database table, and then read it from the another program.
I hope it helps. Best regards,
Alvaro

Error while running a BDC for the Transaction F-02

Hi,
 I'm getting an error "Parking not possible during Batch Input" while running a BDC for the transaction F-02.
 When i click on the error message it displays the message [b]"In Customizing, you can control whether an error message is issued."
 How to solve this issue?.
 Waiting for ur replies.........
Regards
N.Senthil

Hi,
When you are doing the recording in SHDB, and in the same screen where the TCODE to be recorded is given, there are options that you can choose called "Recording Parameters"...Select the checkbox which says "Not a Batch Input Session", this will set the sy-binpt variable to " "(in a recording by default it is "X")...and you will not get this error...
Also make sure while writing the BDC program to make use of the "bdc options" parameter which has this property to switch of sy-binpt...
 Refer below theard for sample bdc code for f-02.
https://forums.sdn.sap.com/click.jspa?searchID=5126766&messageID=1538409
Regards

Error while running a job in background

Hi,
I got the following error message while running the job in background.
"Step 001 started .
Control Framework: Fatal error - GUI cannot be reached.
ABAP/4 processor: RAISE_EXCEPTION
Job cancelled"
What is the reason for this error and how to correct it?

ALV Grid control is based on the custom controls on the screen. When the program is scheduled in background, it tries to create GUI related front-end objects and hence the error u201CFatal Error u2013 GUI cannot be reachedu201D. This type of problem is common with all the programs that use the ALV grid control to display the output.
Solution:
Whenever we execute this type of programs in background, we should be passing a blank docking container instead of the custom container as parent to our grid control.
The docking container doesnu2019t need any of the custom controls on the screen; instead it attaches an area to any or all of the four edges of the screen (top, left, right or bottom). The behavior of the areas in the container is determined by the sequence in which they are initialized. Docking Containers are attached to the screen from the inside out. This means that when you create a second container, it is attached to the edge of the screen, and the container that was already there is pushed outwards.
Let us modify the standard program (by taking a copy of it) to enable it to execute it in background.
Following modifications have to be made:
·        Define a docking container in the program
data: or_doc type ref to cl_gui_docking_container .
·        At the time of creating a custom container, check if the program is being executed in background or foreground. If the program is scheduled in background, then create a docking container instead of custom container.
if cl_gui_alv_grid=>offline( ) is initial.
    create object or_custom_container
           exporting container_name = c_container.
create object or_grid
         exporting i_parent = or_custom_container.
else .
create object or_grid
         exporting i_parent = or_doc .
endif .
Now test executing the program in background. The report would be generated.

CNTL_ERROR while running a custom report program in background mode

Hi,
I am running a report in background on daily basis. I am using cl_gui_custom_container class here and calling the constructor of this class. I am getting a CNTL_ERROR exception at this point. But if i run the same report directly, it is not throwing any exception. The problem is if i schedule it to background. I am not able to sort it out.
I've written the following code below:
I did apply the logic that you'd mentioned.
I've implemented the code as below.
IF gr_container IS INITIAL.
*** Check whether the program is run in batch or foreground
    IF CL_GUI_ALV_GRID=>OFFLINE( ) IS INITIAL.
* Run in foreground
      CREATE OBJECT gr_container
        EXPORTING
          container_name = 'WORK_AREA_CONTAINER'.
      CREATE OBJECT lv_grid
        EXPORTING I_PARENT = gr_container.
    ELSE.
* Run in background
      CREATE OBJECT lv_grid
        EXPORTING
          I_PARENT = gr_dockcontainer.
      ENDIF.
      ENDIF.
i_parent_control = gr_dockcontainer.
        CREATE OBJECT m_base_splitter
        EXPORTING
          parent            = i_parent_control
          ROWS              = 1
          columns           = 2
        EXCEPTIONS
          cntl_error        = 1
          cntl_system_error = 2
          OTHERS            = 3.
        CALL METHOD m_base_splitter->get_container
        EXPORTING
          row       = 1
          column    = 2
          RECEIVING
          container = m_splitter_right_part
        EXCEPTIONS
          OTHERS    = 1.
After I've implemented the above code I'm getting the following error in the batch job:
Category               ABAP Programming Error
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Except.                CX_SY_REF_IS_INITIAL
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "M_BASE_SPLITTER").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
Would you be able to help me in the above issue?
Regards,
Mandeep

Hi Alexander,
Yes I'd declared gr_dockcontainer as type ref to CL_GUI_DOCKING_CONTAINER. And I've now replaced the previous code and wwrote the below code :
gr_container IS INITIAL.
***Check whether the program is run in batch or foreground
      IF CL_GUI_ALV_GRID=>OFFLINE( ) IS INITIAL.
***Run in foreground
        CREATE OBJECT gr_container
          EXPORTING
            container_name = 'WORK_AREA_CONTAINER'.
        CREATE OBJECT lv_grid
          EXPORTING
            I_PARENT = gr_container.
      ELSE.
***Run in background
        CREATE OBJECT gr_dockcontainer
          EXPORTING
            NAME = 'WORK_AREA_CONTAINER'.
      ENDIF.
    ENDIF.
= gr_dockcontainer.
    CREATE OBJECT m_base_splitter
      EXPORTING
        parent            = i_parent_control
        ROWS              = 1
        columns           = 2
      EXCEPTIONS
        cntl_error        = 1
        cntl_system_error = 2
        OTHERS            = 3.
    CALL METHOD m_base_splitter->get_container
      EXPORTING
        row       = 1
        column    = 2
      RECEIVING
        container = m_splitter_right_part
      EXCEPTIONS
        OTHERS    = 1.
But after implementing the above code I'm facing the same issue of CTRL ERROR- " GUI cannot be reached".
Please guide me through this.
Regards,
Mandeep

CNTL_ERROR while running a report in background mode

Hi,
I am running a report in background on daily basis. I am using cl_gui_custom_container class here and calling the constructor of this class. I am getting a CNTL_ERROR exception at this point. But if i run the same report directly, it is not throwing any exception. The problem is if i schedule it to background. I am not able to sort it out. So please if any body knows, answer this.
Thanks,
Kumar

Hi Nithin,
I was facing the similar issue in a custom report program. I did apply the logic that you'd mentioned.
I've implemented the code as below.
IF gr_container IS INITIAL.
*** Check whether the program is run in batch or foreground
    IF CL_GUI_ALV_GRID=>OFFLINE( ) IS INITIAL.
* Run in foreground
      CREATE OBJECT gr_container
        EXPORTING
          container_name = 'WORK_AREA_CONTAINER'.
      CREATE OBJECT lv_grid
        EXPORTING I_PARENT = gr_container.
    ELSE.
* Run in background
      CREATE OBJECT lv_grid
        EXPORTING
          I_PARENT = gr_dockcontainer.
      ENDIF.
      ENDIF.
i_parent_control = gr_dockcontainer.
        CREATE OBJECT m_base_splitter
        EXPORTING
          parent            = i_parent_control
          ROWS              = 1
          columns           = 2
        EXCEPTIONS
          cntl_error        = 1
          cntl_system_error = 2
          OTHERS            = 3.
        CALL METHOD m_base_splitter->get_container
        EXPORTING
          row       = 1
          column    = 2
          RECEIVING
          container = m_splitter_right_part
        EXCEPTIONS
          OTHERS    = 1.
After I've implemented the above code I'm getting the following error in the batch job:
Category               ABAP Programming Error
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Except.                CX_SY_REF_IS_INITIAL
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "M_BASE_SPLITTER").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
Would you be able to help me in the above issue?

ORA-600 [17069] error while running catrelod.sql to downgrade 11g database

Hi,
We are downgrading our 11.2.0.2 database to 10.2.0.4. We have successfullly run catdwgrd.sql without any errors in 11g env. While running catrelod.sql in 10g env we are facing the following error:
SQL> @?/rdbms/admin/catrelod.sql
TIMESTAMP
COMP_TIMESTAMP RELOD__BGN 2013-04-24 20:15:39 2456407 72939
DOC>#######################################################################
DOC>#######################################################################
DOC> The following statement will cause an "ORA-01722: invalid number"
DOC> error if the database server version is not 10.0.0.
DOC> Shutdown ABORT and use a different script or a different server.
DOC>#######################################################################
DOC>#######################################################################
DOC>#
no rows selected
DOC>#######################################################################
DOC>#######################################################################
DOC> The following statement will cause an "ORA-01722: invalid number"
DOC> error if the database has not been opened for MIGRATE.
DOC>
DOC> Perform a "SHUTDOWN ABORT" and
DOC> restart using MIGRATE.
DOC>#######################################################################
DOC>#######################################################################
DOC>#
no rows selected
Session altered.
Session altered.
no rows selected
DECLARE
ERROR at line 1:
ORA-00600: internal error code, arguments: [17069], [0x170FB8CA8], [], [], [],
[], [], []I have checked the trace file in udump but it dint give any readable information.
Please find below environment details.
OS : RHEL 5 64 bit
11g Database : 11.2.0.2
10g Database : 10.2.0.4
Kindly assist.

KR10822864 wrote:
Whenever an ORA-600 error is raised a trace file is generated and an entry written to the alert.log with details of the trace file location. Starting with Oracle Database 11g Release 1, the diagnosability infrastructure was introduced which places the trace and core files into a location controlled by the DIAGNOSTIC_DEST initialization parameter when an incident, such as an ORA-600 is created. For earlier versions, the trace file will be written to either USER_DUMP_DEST (if the error was caught in a user process) or BACKGROUND_DUMP_DEST (if the error was caught in a background process like PMON or SMON). The trace file contains vital information about what led to the error condition
please post 40 lines of alert log info .
MOS Note:ORA-600 [17069] "Failed to pin a library cache object after 50 attempts" [ID 39616.1]
"Look in the trace file for the text 'LIBRARY OBJECT HANDLE: handle=170fb8ca8'"
if not found any massages like above please raise [email protected].
Hi KR,
Thanks for your help. As suggested I have checked the trace file to search and found the below info. I suppose it is some kind of lock but not sure about it. Please let me know if the following makes sense:
    SO: 0x21158a6e0, type: 3, owner: 0x211006f28, flag: INIT/-/-/0x00
    (call) sess: cur 211572570, rec 211572570, usr 211572570; depth: 0
      SO: 0x21158a9b8, type: 3, owner: 0x21158a6e0, flag: INIT/-/-/0x00
      (call) sess: cur 211572570, rec 0, usr 211572570; depth: 1
        SO: 0x1727a2618, type: 54, owner: 0x21158a9b8, flag: INIT/-/-/0x00
        LIBRARY OBJECT PIN: pin=1727a2618 handle=170fb8ca8 mode=S lock=171243e98
        user=211572570 session=211572570 count=1 mask=001d savepoint=0x43 flags=[00]
        SO: 0x171243e98, type: 53, owner: 0x21158a9b8, flag: INIT/-/-/0x00
        LIBRARY OBJECT LOCK: lock=171243e98 handle=170fb8ca8 mode=S
        call pin=0x1727a2618 session pin=(nil) hpc=0000 hlc=0000
        htl=0x171243f18[0x17278a310,0x17278a310] htb=0x17278a310 ssga=0x172789928
        user=211572570 session=211572570 count=1 flags=PNC/[0400] savepoint=0x43
        LIBRARY OBJECT HANDLE: handle=170fb8ca8 mtx=0x170fb8dd8(0) cdp=0
        name=SYS.STANDARD
        hash=51570e225ed8a9a803b7318f191e0a8d timestamp=04-18-2006 00:00:00
        namespace=TABL flags=KGHP/TIM/SML/[02000000]
        kkkk-dddd-llll=0000-001d-001d lock=S pin=S latch#=3 hpc=0004 hlc=0004
        lwt=0x170fb8d50[0x170fb8d50,0x170fb8d50] ltm=0x170fb8d60[0x170fb8d60,0x170fb8d60]
        pwt=0x170fb8d18[0x170fb8d18,0x170fb8d18] ptm=0x170fb8d28[0x170fb8d28,0x170fb8d28]
        ref=0x170fb8d80[0x170fb8d80,0x170fb8d80] lnd=0x170fb8d98[0x170f05b50,0x170fa6858]
          LIBRARY OBJECT: object=170e82de8
          type=PCKG flags=EXS/LOC[0005] pflags=NST/IVR[0201] status=VALD load=0
          DATA BLOCKS:
          data#     heap pointer    status pins change whr
              0 170e831f8 170e82fc0 I/P/A/-/-    0 NONE   00
      SO: 0x21158e470, type: 5, owner: 0x21158a6e0, flag: INIT/-/-/0x00
      (enqueue) CU-70E88BC0-00000001    DID: 0001-001F-00000004
      lv: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res_flag: 0x2
      res: 0x17677adc8, mode: X, lock_flag: 0x0
      own: 0x211572570, sess: 0x211572570, proc: 0x211006f28, prv: 0x17677add8
      SO: 0x177f82c28, type: 59, owner: 0x21158a6e0, flag: INIT/-/-/0x00
      cursor enqueue
      child: 170e89348, flag: 53, number: 0
      parent: 170e89738

Error while running OBIA configuration configApps.bat

I am receiving error while running configapps.bat.
I have the following wnvironment installed:
64 Bit windows
Java 6 (JDK1.6.x)
Weblogic server 10.3.6 in software only mode
Ran OBIEE 11.1.1.7.0 RCU utility to create BIPLATFORM and MDS schemas.
configured OBIEE 11.1.1.7
Installed ODI 11.1.1.7 with All components and “Skip Repository Configuration”
Ran OBI Apps RCU to create schemas for:
ODI Master and Work Repositories (DEV_BIA_ODIREPO)
Oracle Business Applications Components (DEV_BIACOMP)
Oracle Business Analytics Datwarehouse (DEV_DW)
Update to MDS schema.
Installed BI Apps 11.1.1.7.1
Applied FMW Platform Patches
Updated BIACOMP Schema with ATGLite patch scripts
Everything was up and running until now, when i try to configure OBIA via running configApps.bat, it is getting stuck at ODI configuration.
Also the server seems to be going to idle/suspended state every now and after 5-6 mins of startup and i see this message repeated again and again in server log :
<Warning> <oracle.mds> <BEA-000000> < The MDS session was created by the ADF framework with a transaction key for its "single flush" feature, and the call to flushchanges is restricted to that framework. This call does not use that transaction key and although working now, will fail with an exception in future. To find the originator of the call, set the log level for logger "oracle.mds.transkey" to FINEST. Note that the ADF framework manages the MDS session created for the request so an explicit call to flushchanges should be removed>
Has anyone encountered this issue and any idea how to resolve this.
Appreciate any help in advance ...

The re-install has been successful. Didnt encounter any issues in any configuration.
However the waring still appears
<Warning> <oracle.mds> <BEA-000000> < The MDS session was created by the ADF framework with a transaction key for its "single flush" feature, and the call to flushchanges is restricted to that framework. This call does not use that transaction key and although working now, will fail with an exception in future. To find the originator of the call, set the log level for logger "oracle.mds.transkey" to FINEST. Note that the ADF framework manages the MDS session created for the request so an explicit call to flushchanges should be removed>
Also in the log i am getting the following errors as well in the Weblogic server log
BEA -101020 Servelet failed with exception Java.lang.illegalstateexception: Cannot forward a response that is already committed
Oracle.as.management.mbeans.opmn OPMN.queryProcessStatus failed with the following exception oracle.as.management.opmn.optic.OpticBadConnectionException: Failed to create secure socket for OPMN
All patches were applied successfully, including weblogic one's.
Has anyone got any idea how to resolve these issues.
Thanks in advance.

Error while running the page from Jdeveloper

Hello All,
I am running the pages from my Jdeveloper but it is throwing some exception which is related to cache on the local server.Kindly help me out as i am not able to run even old pages which were running earlier.Kindly what changes on the server has affected this.
Below is the exception i am getting in OC4J server tab of the Jdeveloper while running the page,kindly have a look:
[[Sep 25, 2009 11:18:13 AM GMT+05:30]:1253857693195:Thread[HttpRequestHandler-16916276,5,main]:-1:-1:XXXXXX:000.000.00.000:-1:-1:EXCEPTION:[jtf.cache.CacheManager]:CacheManager.put(): Component cache: PROFILE_OPTION_VALUE_CACHE for application: FND is not enabled. Calling put() does not add an entry to the cache
[Sep 25, 2009 11:18:13 AM GMT+05:30]:1253857693445:Thread[HttpRequestHandler-16617866,5,main]:-1:-1:XXXXXX:000.000.00.000:-1:-1:PROCEDURE:[fnd.security.DBConnObj]:Pool.isUsable(): END: Returning true.
[Sep 25, 2009 11:18:13 AM GMT+05:30]:1253857693445:Thread[HttpRequestHandler-16916276,5,main]:-1:-1:XXXXXX:000.000.00.000:-1:-1:EVENT:[fnd.profiles.Profiles.getProfileOptionValue.config]:name=APPL_SERVER_TRUST_LEVEL; levelID=10001; levelValue=0; levelValueApplID=0; value=2; Cache Miss
[Sep 25, 2009 11:18:13 AM GMT+05:30]:1253857693695:Thread[HttpRequestHandler-16916276,5,main]:-1:-1:XXXXXX:000.000.00.000:-1:-1:PROCEDURE:[fnd.common.WebAppsContext]:oracle.apps.fnd.common.WebAppsContext.getJDBCConnection(oracle.apps.fnd.profiles.Profiles@c063ad,0xe4bb3c,false): : BEGIN/END
[Sep 25, 2009 11:18:13 AM GMT+05:30]:1253857693695:Thread[Thread-12,1,main]:-1:-1:XXXXXX:000.000.00.000:-1:-1:PROCEDURE:[fnd.security.AppsConnectionManager]:makeGuestConnection(): BEGIN
[Sep 25, 2009 11:18:13 AM GMT+05:30]:1253857693773:Thread[HttpRequestHandler-16617866,5,main]:-1:-1:XXXXXX:000.000.00.000:-1:-1:UNEXPECTED:[fnd.common.logging.DebugEventManager.handlerException]:java.lang.Exception: E:\oracle\redora\iAS\Apache\Jserv\logs\apps.log (The system cannot find the path specified)
 at oracle.apps.fnd.common.logging.FileHandler.<init>(FileHandler.java:103)
 at oracle.apps.fnd.common.logging.FileHandler.<init>(FileHandler.java:80)
 at oracle.apps.fnd.common.logging.DebugEventManager.registerHandlers(DebugEventManager.java:1239)
 at oracle.apps.fnd.common.logging.DebugEventManager.internalReinit(DebugEventManager.java:986)
 at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:944)
 at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:931)
 at oracle.apps.fnd.common.AppsLog.reInitialize(AppsLog.java:570)
 at oracle.apps.fnd.common.AppsContext.initLog(AppsContext.java:873)
 at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:858)
 at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:827)
 at oracle.apps.fnd.common.AppsContext.<init>(AppsContext.java:686)
 at oracle.apps.fnd.common.WebAppsContext.<init>(WebAppsContext.java:846)
 at oracle.apps.fnd.framework.server.OAUtility.getWebAppsContext(OAUtility.java:351)
 at oracle.apps.fnd.framework.webui.OAServerDelegate.getWebAppsContext(OAServerDelegate.java:1684)
 at oracle.apps.fnd.framework.webui.OAServerDelegate.getIcxCookieName(OAServerDelegate.java:568)
 at oracle.apps.fnd.framework.webui.OAJSPHelper.getIcxCookieName(OAJSPHelper.java:207)
 at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:167)
 at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80)
 at runregion.jspService(runregion.jsp:96)
 at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
 at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
 at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
 at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
 at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
 at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
 at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
 at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
 at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797)
 at java.lang.Thread.run(Thread.java:534)

Is it 9i Jdeveloper or 10G. Also check the Jdeveloper is being run on a compatible database. A Jdeveloper for 11i should run on an instance having 11i installed and same for R12. Also check the version of OA Frameworrk in the Jdeveloper you are using and the version deployed in instance.
Regards
Sumti

Exception while running ADF 11g application on Weblogic 10.3.2

Hi All,
I have Created a ADF Application using ADF faces 11g. I have Created a Webservice Datacontrol and calling Synchronous BPEL flow from an ADF page. I have deployed the ADF application on Weblogic 10.3.2 but while running the page using the URL http://10.142.214.163:9001/AdfApp/faces/GetBalance.jspx I am getting the following exception,
java.lang.NullPointerException
at oracle.adf.model.binding.DCIteratorBinding.getSortCriteria(DCIteratorBinding.java:3710)
at oracle.adf.model.binding.DCInvokeMethod.setAssociatedIteratorBinding(DCInvokeMethod.java:865)
at oracle.adf.model.binding.DCIteratorBinding.cacheRefOnOperation(DCIteratorBinding.java:5127)
at oracle.jbo.uicli.binding.JUMethodIteratorDef$JUMethodIteratorBinding.getActionBinding(JUMethodIteratorDef.java:283)
at oracle.jbo.uicli.binding.JUMethodIteratorDef.isRefreshable(JUMethodIteratorDef.java:59)
at oracle.adf.model.binding.DCExecutableBindingDef.isRefreshable(DCExecutableBindingDef.java:274)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:2921)
at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2791)
at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareModel(PageLifecycleImpl.java:112)
at oracle.adf.controller.v2.lifecycle.Lifecycle$2.execute(Lifecycle.java:137)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:192)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.access$400(ADFPhaseListener.java:21)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.startPageLifecycle(ADFPhaseListener.java:231)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$1.after(ADFPhaseListener.java:267)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:71)
at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:53)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:364)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
But the same application is working properly in Integrated Weblogic Server in Jdeveloper 11g.
Thanks in advance.
Please help on this...
Best Regards
Majid Hussain

Hi,
Did you configure your application module to use a JDBC data source? To do this, right-click the app module in the navigator, select Configurations and in the dialog that comes up change the connection type to JDBC Data Source and enter your data source name - which should be the same as the data source you created on the weblogic server.
Also, I do suggest you create an EAR file - this is what we've tested and certified with. You can find more details in the deployment chapter of the fusion developer's guide: http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/deployment_topics.htm#CHDJJDDG.
Hope this helps
Blaise

Alv show in report but when see in spool (after run background job) there i

my program have some error when i run result alv show in report but when see in spool (after run background job) there is no data, (other program can see result in spool)
Please help
here is some example of my program
********************************declare internal table*****************************
internal table output for BDC
data : begin of t_output occurs 0,
bukrs type anla-bukrs,
anln1 type anla-anln1,
anln2 type anla-anln2,
zugdt type anla-zugdt,
result(70) type c,
end of t_output.
*****get data from loop********************************
loop at t_anla.
 CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 INPUT = t_anla-anln1
 IMPORTING
 OUTPUT = t_anla-anln1.
 CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 INPUT = t_anla-anln2
 IMPORTING
 OUTPUT = t_anla-anln2.
check record is correct or not
 select single bukrs anln1 anln2 zugdt
 into w_output
 from anla
 where bukrs = t_anla-bukrs and
 anln1 = t_anla-anln1 and
 anln2 = t_anla-anln2
 zugdt = '00000000'
if record is correct
 if sy-subrc = 0 and w_output-zugdt = '00000000'.
 w_output-bukrs = t_anla-bukrs.
 w_output-anln1 = t_anla-anln1.
 w_output-anln2 = t_anla-anln2.
 w_output-result = 'Yes : this asset can delete'.
 append w_output to t_output.
if record is not correct
 elseif sy-subrc = 0 and w_output-zugdt <> '00000000'.
there is error record this asset have value already
 v_have_error = 'X'.
 w_output-bukrs = t_anla-bukrs.
 w_output-anln1 = t_anla-anln1.
 w_output-anln2 = t_anla-anln2.
 w_output-result = 'Error : this asset have value already'.
 append w_output to t_output.
 else.
there is error record this asset donot exist in table anla
 v_have_error = 'X'.
 w_output-bukrs = t_anla-bukrs.
 w_output-anln1 = t_anla-anln1.
 w_output-anln2 = t_anla-anln2.
 w_output-result = 'Error : this asset doest not exist'.
 append w_output to t_output.
 endif.
*end of check record is correct or not
 clear w_output.
endloop.
******************************show data in ALV***************************************************
show data from file in ALV
perform display_report_ALV.
*& Form display_report_ALV
form display_report_ALV.
DATA: LT_FIELD_CAT TYPE SLIS_T_FIELDCAT_ALV,
 LT_EVENTS TYPE SLIS_T_EVENT,
 LV_REPID LIKE SY-REPID.
PERFORM ALV_DEFINE_FIELD_CAT USING LT_FIELD_CAT.
PERFORM ALV_HEADER_BUILD USING T_LIST_TOP_OF_PAGE[].
PERFORM ALV_EVENTTAB_BUILD USING LT_EVENTS[].
LV_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = LV_REPID
 IT_FIELDCAT = LT_FIELD_CAT
 I_SAVE = 'A'
 IT_EVENTS = LT_EVENTS[]
 TABLES
 T_OUTTAB = t_output
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF SY-SUBRC NE 0.
 WRITE: / 'Return Code : ', SY-SUBRC,
 'from FUNCTION REUSE_ALV_GRID_DISPLAY'.
ENDIF.
endform.
*& Form alv_define_field_cat
 text
 -->P_LT_FIELD_CAT text
FORM ALV_DEFINE_FIELD_CAT USING TB_FCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: WA_FIELDCAT LIKE LINE OF TB_FCAT,
 LV_COL_POS TYPE I.
DEFINE FIELD_CAT.
 CLEAR WA_FIELDCAT.
 ADD 1 TO LV_COL_POS.
 WA_FIELDCAT-FIELDNAME = &1.
 WA_FIELDCAT-REF_TABNAME = &2.
 WA_FIELDCAT-COL_POS = LV_COL_POS.
 WA_FIELDCAT-KEY = &3.
 WA_FIELDCAT-NO_OUT = &4.
 WA_FIELDCAT-REF_FIELDNAME = &5.
 WA_FIELDCAT-DDICTXT = 'M'.
 IF NOT &6 IS INITIAL.
 WA_FIELDCAT-SELTEXT_L = &6.
 WA_FIELDCAT-SELTEXT_M = &6.
 WA_FIELDCAT-SELTEXT_S = &6.
 ENDIF.
 WA_FIELDCAT-DO_SUM = &7.
 WA_FIELDCAT-OUTPUTLEN = &8.
 APPEND WA_FIELDCAT TO TB_FCAT.
END-OF-DEFINITION.
FIELD_CAT 'BUKRS' 'ANLA' 'X' '' 'BUKRS' 'Company Code' '' ''.
FIELD_CAT 'ANLN1' 'ANLA' 'X' '' 'ANLN1' 'Asset Number' '' ''.
FIELD_CAT 'ANLN2' 'ANLA' 'X' '' 'ANLN2' 'Asset Sub Number' '' ''.
FIELD_CAT 'ATEXT' 'T5EAE' 'X' '' 'ATEXT' 'Result' '' ''.
FIELD_CAT 'RESULT' '' 'X' '' 'RESULT' 'RESULT' '' ''.
ENDFORM. " alv_define_field_cat

Hi,
Check this code..
FORM display_report_alv.
DATA: lt_field_cat TYPE slis_t_fieldcat_alv,
lt_events TYPE slis_t_event,
lv_repid LIKE sy-repid.
PERFORM alv_define_field_cat USING lt_field_cat.
PERFORM alv_header_build USING t_list_top_of_page[].
PERFORM alv_eventtab_build USING lt_events[].
lv_repid = sy-repid.
IF sy-batch EQ 'X'. ----> " System Field for Backgroud..if Background use list display
 CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 i_callback_program = lv_repid
 it_fieldcat = lt_field_cat
 i_save = 'A'
 it_events = lt_events[]
 TABLES
 t_outtab = t_output
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
ELSE.
 CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = lv_repid
 it_fieldcat = lt_field_cat
 i_save = 'A'
 it_events = lt_events[]
 TABLES
 t_outtab = t_output
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
ENDIF.
IF sy-subrc NE 0.
 WRITE: / 'Return Code : ', sy-subrc,
 'from FUNCTION REUSE_ALV_GRID_DISPLAY'.
ENDIF.
ENDFORM. "display_report_ALV

Error while running the APP-F110 & Dunning - F150

HI Guru's,
while running the APP,,,i got the message finally posting orders"1 generated,1completed",,,,,,,But i am not getting the spool request and printout
In the same way in dunning,,i did the entire procedure,but not getting the spool request...
kindly help me
Regards
Sap Guru

hi Sapguru,
ok, Congrats for posting the Orders...haa
Go to Tcode SE38 and enter the program as RFFOUS_C and execute it.
In that screen enter the Identification and program run date and enter all the required firelds and then again execute it....
So that u can print the Check with the check lot number that u have created
Please create the check lot number in FCHI.
If u want to see the spool then go to SP01 and see there...
Hpe this resolve our problem...
assign the points if usefulll
Ranjit
null

Calling Spool while running in Foreground

Similar Messages

Maybe you are looking for