Calling tcode CJB2 while saving CJ20N transaction
Hi,
I have problem , when I am seeting release for wbs elemnt in CJ20N , and saving, at the time of save I am calling a substitution where I am calling transaction CJB2 for automatic settelment rule creation , but it is not creating I have analysed and found that the tables are locked due which CJB2 did not create settlement.
Therefore , please help me what other mehod can I use or can above senario be used with some modification
many thanks in advance
bobby
Hi,
I am calling in program 'ZRGGBS000' this is a program used by sap for substitutions: exit-formpool for Uxxx-exits. I have created a substitution exit U902 through OPSN transaction and i am writing the form roution u902 in the above program. I am calling only CJB2 transactio in this program , this program automatically triggered when we save in CJ20n
thanks
bobby
Message was edited by:
Bobby G
Similar Messages
-
Screen Error while saving VA02 Transaction
Dear All,
Yesterday there was a sudden power failure in my company. Even UPS also got fail. Due to which some errors are coming in Production Server.
The error is coming in VA02 transaction while saving the transaction. The error is: "SAP SYSTEM MESSAGE - ERROr IN LOADING SCREEN: NO END LABEL".
Here is the below log from SM21 transaction.
Date : 31.10.2009
Time -Type-Nr-Clt-User-TCode-Priority-Grp-N-Text
18:54:00-DIA-000-554-ITDEPT--VA02-D0-1-ransaction Canceled 00 029 ( SAPLSPO2 0301 )
18:54:01-DIA-000-554-ITDEPT----
R4-7-Delete session 001 after error 024
So can you please explain, what I need to do to resolve the error. Although I have already activated the program SAPMV45A.
Regards,
VishalThis link describes similar circumstances.
Error Loading Screens - No End Label
No solution was found and OSS logging was suggested. -
User exit that triggers while saving in transaction F-02
Can any one please tell which userexit trigers while saving The document in transaction F-02.
I have tried some exits but they are not triggered while saving.Hi Satya,
These are the User Exits for that T-Code.
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment).
Out of these, i am expecting one of the below is triggered while saving.
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
Regards, -
Getting Error while saving a transaction without making any changes to it.
Hi All,
I have a page where in the advance table I add few rows and save the transaction. First time when I save it everything works fine, but when I save it again without making any changes to the fields I get following error:
"Unable to perform transaction on the record. \nCause: The record has been deleted by another user. \nAction: Cancel the transaction and re-query the records to get the new data."
In the same page if I make any changes again it allows me to save the transaction.
Please guide how we can avoid it..
I have already checked many threads related to the issue but nothing has worked. Please help!!
Any help would be highly appreciated..
Regards,
NisheethHi All,
please help!! -
CRM to ECC: Controlling Integration Issue while saving Service Transactions
Hi,
We have configured all CRM service functionalities with ECC integration. We have also set up controlling integration following best practices document.
We are getting the following error whenever we try to save any service transaction (Service Contract or Service Order).
u201CAn error occurred in system XXXXECC during account assignmentu201D
u2022 Errors in prerequisite object Item 2000000042/100 (Notification E IAOM 026)
u2022 Collector posting not allowed on account (Notification E YAM_RE 013)
Please help to resolve this issue.
Thanks,
PrishHi Ashish,
Could you please tell me how do we assign the debit memo request to the internal order.
I am creating a debit memo request from the confirmation. the debit memo request doesnt have the internal order number that was created in ECC. And hence, I am not able to post the revenue from the confirmation to the internal order.
Could you please help.
Regards,
Itisha -
Need user exit to add body text in mail while saving the transaction VF02
Hi All,
Output type has been configured as external send(5) to trigger billing document as PDF. There is a requirment to add body text in the mail along with pdf attachement. Funtional consultant has tried using NACE "Mail title and Text" but that doesn't worked out. As a abaper, we are trying to identfy the user exit where I can code the body of mail text.
Can any body please let us know the user exit to add the body text only?
Regards,
Suresh Kumar.Hi,
In your driver program you will have one standard include RVADOPFO.
Copy all the code available in that include and make it to Z include.
In this include function module ADDR_GET_NEXT_COMM_TYPE, will have the email address, subject etc.. details.
So You can modify the contents of the imported parameters here.
The above code will trigger only when update debugging is switched on!!!!!
Regards,
Santhosh. -
Error"This order cannot be processed"is appearing while saving in QA32
Hi Experts,
When I am going for Qa32 transaction after UD code selection I did stock posting, while saving QA32 transaction one error is occuring "Order cannnot be processed".
For material inspn type 13 is active.
in the last financial year that is till mar-2008 it is been posted and saved successfully.
I doubt is there any year dependent parameter has to be set.
Thanks in advance
Rewards points to be given for suitable solution
Regards
Honyalhi
i think once the system try to post the material it will also generate accounting documents which is year dependent,kindly check it
regards
thyagarajan -
HOW TO Send mail while saving VA02
How can i send mail while saving VA02.
The mail address i have to pick from custom table based on plant.
Just for the trial we used : output type :KRML
Application : V1
Transaction medium :7.
and the program RSNASTSO routine SAPOFFICE_AUFRUF_VX is attached in the nace.
The same output type is attached in va02.If we use this output type with this medium , it is asking us mail partner
address also in the VA02.
but we have to get the mail partner from custom table.
And with this output type , the program attched in the NACE (RSNASTSO) IS NOT GETTING triggered.
But the mail is being sent to the mail partner which i mentioned in the VA02 Communication method.
How can i solve this.
Finally my requirement is i have to send a mail to exter id which is maintained in the custom table while saving VA02.
Regards
Ramakrishna LHi,
We had set a output type in NACE. and that output type we have in the VA02 transaction also.
But While saving the transaction it is not going through the program mentioned in the NACE for that output type.
But mail is sent to the SAP Inbox or official id .
how that mail is gone i am not understanding.
How can we do to go through the program mentioned in NACE while saving the VA02.
The mail body coming with text " sales order is blocked" sopme thing like this.
This same mail i have to sent to the mail id maintained in Custom table plant wise.
Regards
Ramakrishna L -
How to send a mail while saving va02
Hi experts,
i have to send a mail while saving the VA02.
The mail id s are maintained in Custom table based on the plant.
Regards
Ramakrishna LHi,
We had set a output type in NACE. and that output type we have in the VA02 transaction also.
But While saving the transaction it is not going through the program mentioned in the NACE for that output type.
But mail is sent to the SAP Inbox or official id .
how that mail is gone i am not understanding.
How can we do to go through the program mentioned in NACE while saving the VA02.
The mail body coming with text " sales order is blocked" sopme thing like this.
This same mail i have to sent to the mail id maintained in Custom table plant wise.
Regards
Ramakrishna L -
Run time error while saving values in File (Tcode)
Hi,
I am using FM call function 'FILE_GET_NAME'
exporting
logical_filename = logical_filename
parameter_1 = program_name
parameter_2 = file_id_param
importing
file_name = physical_filename
exceptions
file_not_found = 1
others = 2.
for this I am trying to maintain dynamic values(field symbols) in Tcode FILE Logical file name definition , physical path as.
Physical file =<PARAM_1>.<PARAM_2>
But while saving it dumps, saying filed symbol assinment to substring is not allowed.
Physical path for the same is /<V=Z_DIR_MAIN>/<SYSID>/<V=Z_DIR_OUT>/<FILENAME>.<CLIENT>.<DATE><TIME>.
Regards
Mohinder Singh ChauhanHello Mohinder,
the better way to analyse these kind of things is by entering the function module in se37 and providing the required test data.
In your scenarion as you say its throwing a runtime dump related to field symbols better you concatenate the data param1 and param2 into a new variable and then pass that value into the function module.
Thanks,
M.Naveen kumar -
Error while saving the documents in Transactions MIRO,VA02, VA01, ects
Hi SAP Gurus,
i am geting an popup error while saving or after changing the documents in MIRO VA01, VA02 transactions..
The error is * " Condition Table Missing : Access JST1 60 ( Pricing Taxes ) " *
can u please help me out.
Regards
Kumar mHi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V. -
Error while saving Excise Invoice in J1IIN Transaction.
Hi All,
While saving Excise Invoice in J1IIN Transaction, am getting the following errors.
1.Balance in Transaction Currency.
2.System failure during locking G/L account 7000 by 61110.
Pls provide me the solution.
Regards,
Sasi.Hi SASIKANTH,
Go thru the below issues, hope would be helpful.
1. Balance in Transaction Currency
Balance in transaction currency
Re: Balance in Transaction Currency
2.System failure during locking G/L account 7000 by 61110
System failure during locking GLaccount (the Company Code) by (GLaccount no
System failure during locking GL 401000
System failure during locking GLaccount 1000 by 43000130
Thanks,
Swamy H P -
Update LIKP table while saving the output type in VT02N transaction
Hi All,
I have a requirement where i have to update Delivery Priority(LPRIO) field in LIKP table while saving the output type in VT02N transaction. I am not able to use the BAPI "BAPI_OUTB_DELIVERY_CHANGE" or FM "WS_DELIVERY_UPDATE" because, when we save the output type the programs that are configured in NACE are triggered in update mode and hence i will get a roll back error.
Let me know other ways of updating the table at the time of saving output type for shipment transaction VT02N.This could be a result of one of the following reasons:
1: Incorrect smart form/routine assigned in the output configuration (NACE)
2: Serial number range of the delivery expired
3: The default settings of the user (SU01) processing the delivery is missing the default printer name.
Hope this is helpful
Manish -
Balance in transaction currency while saving the invoice
Hi sd experts,
i am getting the following error msg while saving the invoice
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 450.00' and currency key 'INR'.
Thanks a lot.
Regards,
pulijala satish kumarBalance in transaction currency can happen normally at the time of billing(due to auto excise creation) or during excise invoice creation or at the time of Utilizations.
This can happen due to many times we might be missing the data relevant of GLs in CIN Master data & Credit-Debitor accounts for your excise amounts(for the combination with Excise transaction type)
Please check the tables J_1ITRNACC & J_1IEXCACC.(this second table i am not sure--will be maintained in IMG>>Log-General>>>India>> account determination also you need to check the indicators like AED,SED,NCCD etc for your Excise registrations)
As suggested--please search in google before posting.
Phanikumar -
Pure virtual function call error while saving the vi.
Hi everybody,
I'm using LabVIEW 8.6 to create the applications. I got "fatal error: memorymanager.cpp: line 437 and Pure virtual function call error: R6025, while i try to save the vi. Also no DAQ cards are interfaced with my PC.
How can i rectify this error?
Solved!
Go to Solution.Hi solutions,
the simplest solution would be to recreate the VI from scratch. Yes, really!
You can also try to copy the block diagram to a new VI, this might help too. Or to clean up your VI be creating subVIs…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Maybe you are looking for
-
Balance Carried Forward in Document Currency
Hi, Experts, In My Customer Account Statement I need the Field in "Balance Carried Forward in Document Currency" Present in my Report "Balance Carried Forward in Local Currency" In this field Having the table KNC1. But in this table "Balance Carried
-
Connecting iPod to audio system on new Honda Accord
I tried to connect my eight-year-old iPod to the audio system on a new Honda Accord and got the message "Unsupported." The instructions on how to do this are not complex. Any idea why my iPod shows up as unsupported, other than its age? Any soluti
-
Adobe Reader X comes up with "Internal Error Message"
-
ORA-27054: NFS not mounted with proper option
I was trying to take RMAN backup from RHEL 5 for a database residing on fedora 13 but the NFS share is getting me the following error ORA-19504: failed to create file "/backup/weekly/1qmp0vv3_1_1" ORA-27054: NFS file system where the file is created
-
Error while executing smartform
Hi Gurus, After i save and execute the smarttform, when i give print preview..it says formatting error and throws an error like this: "field within a field not allowed(vbdpa-brgew)" Where did i go wrong. Please help. Regards, Rakesh.